Lucien Cartier-Tilet
4234be1849
Add documentation for eldoc, elisp keybindings Add package eldoc-box for childframe elisp documentation Add org-sticky-header package
95 KiB
Vanilla Emacs Configuration
- Introduction
- Basic configuration
- Custom Elisp
- Package Management
- Keybinding Management
- Packages Configuration
- Keybindings
Introduction
STOP Read this first!
You just landed on my vanilla Emacs configuration. However, this URL was used until recently for my Spacemacs configuration. If you want my complete, working Emacs configuration, I recommend you to head over there. This document is still a work in progress!
After a couple of years using Spacemacs and a failed attempt at switching to DoomEmacs, I’m finally switching back to a vanilla configuration! Be aware though this document is still very much a work in progress document, lots of comments on existing configuration are missing, and lots of functionnalities are still not implemented. I’m still in the process of porting my Spacemacs configuration over here.
Basic configuration
(setq visible-bell t)
(setq-default initial-major-mode 'emacs-lisp-mode)
(setq display-time-format "%Y-%m-%d %H:%M")
(display-time-mode 1) ; display time in modeline
;; Display battery in modeline when using a laptop
(unless (equal "Battery status not available"
(battery))
(display-battery-mode 1))
(setq frame-title-format
'(""
"%b"
(:eval
(let ((project-name (projectile-project-name)))
(unless (string= "-" project-name)
(format (if (buffer-modified-p) " ◉ %s" " ● %s") project-name))))))
;; Make ESC quit prompts
(global-set-key (kbd "<escape>") 'keyboard-escape-quit)
;; Answer with y or n, not yes or not
(defalias 'yes-or-no-p 'y-or-n-p)
(column-number-mode)
(global-display-line-numbers-mode t)
;; Disable line numbers for some modes
(dolist (mode '(org-mode-hook
comint-mode
term-mode-hook
shell-mode-hook
eshell-mode-hook
vterm-mode-hook
special-mode-hook
helpful-mode-hook
woman-mode-hook))
(add-hook mode (lambda () (display-line-numbers-mode 0))))
(setq x-stretch-cursor t ; stretch cursor to the glyph’s width
delete-by-moving-to-trash t ; delete files to trash
window-combination-resize t ; take new window space from all other windows
undo-limit 100000000 ; raise undo limit to 100Mb
auto-save-default t
truncate-string-ellipsis "…")
(global-subword-mode 1)
;; (electric-indent-mode -1)
(setq-default major-mode 'org-mode)
(defun modeline-contitional-buffer-encoding ()
"Hide \"LF UTF-8\" in modeline.
It is expected of files to be encoded with LF UTF-8, so only show
the encoding in the modeline if the encoding is worth notifying
the user."
(setq-local doom-modeline-buffer-encoding
(unless (and (memq (plist-get (coding-system-plist buffer-file-coding-system) :category)
'(coding-category-undecided coding-category-utf-8))
(not (memq (coding-system-eol-type buffer-file-coding-system) '(1 2))))
t)))
(add-hook 'after-change-major-mode-hook #'modeline-contitional-buffer-encoding)
(add-hook 'prog-mode-hook #'hs-minor-mode)
(with-eval-after-load 'org
(add-hook 'org-mode-hook (lambda ()
(interactive)
(electric-indent-local-mode -1))))Early init
The early init file is the file loaded before anything else in Emacs. This is where I put some options in order to disable as quickly as possible some built-in features of Emacs before they can be even loaded, speeding Emacs up a bit.
(setq package-enable-at-startup nil
inhibit-startup-message t
frame-resize-pixelwise t ; fine resize
package-native-compile t) ; native compile packages
(scroll-bar-mode -1) ; disable scrollbar
(tool-bar-mode -1) ; disable toolbar
(tooltip-mode -1) ; disable tooltips
(set-fringe-mode 10) ; give some breathing room
(menu-bar-mode -1) ; disable menubarPersonal information
Emacs needs to know its master! For various reasons by the way, some
packages rely of these variables to know who it is talking to or
dealing with, such as mu4e which will guess who you are if you haven’t
set it up correctly.
(setq user-full-name "Lucien Cartier-Tilet"
user-real-login-name "Lucien Cartier-Tilet"
user-login-name "phundrak"
user-mail-address "lucien@phundrak.com")Stay clean, Emacs!
As nice as Emacs is, it isn’t very polite or clean by default: open a
file, and it will create backup files in the same directory. But then,
when you open your directory with your favorite file manager and see
almost all of your files duplicated with a ~ appended to the filename,
it looks really uncomfortable! This is why I prefer to tell Emacs to
keep its backup files to itself in a directory it only will acces.
(setq backup-directory-alist `(("." . ,(expand-file-name ".temp/backups/" user-emacs-directory))))
It also loves to litter its init.el with custom variables here and
there, but the thing is: I regenerate my init.el each time I tangle
this file! How can I keep Emacs from adding stuff that will be almost
immediately lost? Did someone say custom file?
(setq-default custom-file (expand-file-name ".custom.el" user-emacs-directory))
(when (file-exists-p custom-file) ; Don’t forget to load it, we still need it
(load custom-file))Finally, the scatch buffer always has some message at its beginning, I don’t want it!
(setq-default initial-scratch-message nil)Editing text in Emacs
I don’t like tabs. They rarely look good, and if I need it I can
almost always tell Emacs to use them through a .dir-locals.el file or
through the config file of my code formatter. So by default, let’s
disable them:
(setq-default indent-tabs-mode nil)
(add-hook 'prog-mode-hook (lambda () (setq indent-tabs-mode nil)))Just to go on a little tangeant here: I don’t exactly hate tabs, but I find them really annoying when your text editor knows only them. Sure, for indentation they work great and they allow different people getting different settings in their text editor depending on their preferred tastes —some may prefer 2 spaces tabs, some may prefer 4 spaces tabs, some deranged people prefer 8 spaces tabs, and some monsters prefer 3!
But the thing is, once you indented your code and then you need alignment, tabs don’t work anymore! Or they may on your text editor but not on your coworker’s! (He’s the one using 3 spaces tabs by the way).
So, is the answer to use spaces instead of tabs, and screw peoples’ preferences in terms of tabs width? No, I say the answer is more moderate than that, and it might frighten or anger some of you at first: use both spaces and tabs. Now, before you lynch me on the main avenue in front of everyone, let me tell you absolutely no one should ever be mixing spaces and tabs for indentation, that would be absolutely terrible and would bring the worst of both worlds. What’s the best of both worlds then?
Tabs for indentation
Spaces for alignment
I haven’t found a way to automate that in Emacs yet aside from formatters’ config file, and tabs look bat in EmacsLisp anyways, so I’ll stick with spaces by default and change it where needed.
I never want to keep trailing spaces in my files, which is why I’m doing this:
(add-hook 'before-save-hook #'whitespace-cleanup)Fonts
I don’t like the default font I usually have on my machines, I really don’t.
(defvar phundrak/default-font-size 90
"Default font size.") (when (equal system-type 'gnu/linux)
(set-face-attribute 'default nil :font "Cascadia Code" :height phundrak/default-font-size))Nice macros from Doom-Emacs
Doom-Emacs has some really nice macros that can come in really handy,
but since I prefer to rely on my own configuration, I’ll instead just
copy their code here. First we get the after! macro:
(defmacro after! (package &rest body)
"Evaluate BODY after PACKAGE have loaded.
PACKAGE is a symbol or list of them. These are package names, not modes,
functions or variables. It can be:
- An unquoted package symbol (the name of a package)
(after! helm BODY...)
- An unquoted list of package symbols (i.e. BODY is evaluated once both magit
and git-gutter have loaded)
(after! (magit git-gutter) BODY...)
- An unquoted, nested list of compound package lists, using any combination of
:or/:any and :and/:all
(after! (:or package-a package-b ...) BODY...)
(after! (:and package-a package-b ...) BODY...)
(after! (:and package-a (:or package-b package-c) ...) BODY...)
Without :or/:any/:and/:all, :and/:all are implied.
This is a wrapper around `eval-after-load' that:
1. Suppresses warnings for disabled packages at compile-time
2. Supports compound package statements (see below)
3. Prevents eager expansion pulling in autoloaded macros all at once"
(declare (indent defun) (debug t))
(if (symbolp package)
(list (if (or (not (bound-and-true-p byte-compile-current-file))
(require package nil 'noerror))
#'progn
#'with-no-warnings)
;; We intentionally avoid `with-eval-after-load' to prevent eager
;; macro expansion from pulling (or failing to pull) in autoloaded
;; macros/packages.
`(eval-after-load ',package ',(macroexp-progn body)))
(let ((p (car package)))
(cond ((not (keywordp p))
`(after! (:and ,@package) ,@body))
((memq p '(:or :any))
(macroexp-progn
(cl-loop for next in (cdr package)
collect `(after! ,next ,@body))))
((memq p '(:and :all))
(dolist (next (cdr package))
(setq body `((after! ,next ,@body))))
(car body))))))Custom Elisp
(defun split-window-right-and-focus ()
(interactive)
(split-window-right)
(windmove-right)
(when (and (boundp 'golden-ratio-mode)
(symbol-value golden-ratio-mode))
(golden-ratio)))
(defun split-window-below-and-focus ()
(interactive)
(split-window-below)
(windmove-down)
(when (and (boundp 'golden-ratio-mode)
(symbol-value golden-ratio-mode))
(golden-ratio)))
(defun ibuffer-list-buffers-and-focus ()
(interactive)
(ibuffer-list-buffers)
(windmove-down)
(when (and (boundp 'golden-ratio-mode)
(symbol-value golden-ratio-mode))
(golden-ratio))) (defun switch-to-messages-buffer ()
"Switch to Messages buffer."
(interactive)
(switch-to-buffer "*Messages*"))
(defun switch-to-scratch-buffer ()
"Switch to Messages buffer."
(interactive)
(switch-to-buffer "*scratch*"))| / | <c> | <c> |
|---|---|---|
| Emphasis | Character | Character code |
| Bold | * |
42 |
| Italic | / |
47 |
| Code | ~ |
126 |
(defun org-mode-emphasize-bold ()
"Emphasize as bold the current region.
See also `org-emphasize'."
(interactive)
(org-emphasize 42)) (defun phundrak/toggle-org-src-window-split ()
"This function allows the user to toggle the behavior of
`org-edit-src-code'. If the variable `org-src-window-setup' has
the value `split-window-right', then it will be changed to
`split-window-below'. Otherwise, it will be set back to
`split-window-right'"
(interactive)
(if (equal org-src-window-setup 'split-window-right)
(setq org-src-window-setup 'split-window-below)
(setq org-src-window-setup 'split-window-right))
(message "Org-src buffers will now split %s"
(if (equal org-src-window-setup 'split-window-right)
"vertically"
"horizontally")))Package Management
Repositories
By default, only GNU’s repositories are available to the package managers of Emacs. I also want to use Melpa and org-mode’s repository, so let’s add them! Note that the Elpa repository has been renamed to the gnu repository due to the addition of another Elpa repository, nongnu, which will hosts packages that do not conform to the FSF’s copyright assignment. Both the gnu and the nonfree repositories are Elpa repositories now, and they were renamed in order to avoid any confusion between the two of them.
(setq package-archives '(("melpa" . "https://melpa.org/packages/")
("org" . "https://orgmode.org/elpa/")
("gnu" . "https://elpa.gnu.org/packages/")
("nongnu" . "https://elpa.nongnu.org/nongnu/")))Straight
For my package management, I prefer to use straight (Github). This is
due to its capacity of integrating nicely with use-package, which is
also supported by general which I use for my keybindings (see below),
but also because with it I can specify where to retrieve packages that
are not on MELPA or ELPA but on Github and other online Git
repositories too.
(defvar bootstrap-version)
(defvar comp-deferred-compilation-deny-list ()) ; workaround, otherwise straight shits itself
(let ((bootstrap-file
(expand-file-name "straight/repos/straight.el/bootstrap.el" user-emacs-directory))
(bootstrap-version 5))
(unless (file-exists-p bootstrap-file)
(with-current-buffer
(url-retrieve-synchronously
"https://raw.githubusercontent.com/raxod502/straight.el/develop/install.el"
'silent 'inhibit-cookies)
(goto-char (point-max))
(eval-print-last-sexp)))
(load bootstrap-file nil 'nomessage))
(package-initialize)
(unless package-archive-contents
(package-refresh-contents))
;; Initialize use-package on non-Linux platforms
(unless (package-installed-p 'use-package)
(package-install 'use-package))
(require 'use-package)
(setq use-package-always-ensure t)Keybinding Management
Which-key
(use-package which-key
:straight (:build t)
:defer t
:init (which-key-mode)
:diminish which-key-mode
:config
(setq which-key-idle-delay 0.3))General
(use-package general
:straight (:build t)
:init
(general-auto-unbind-keys))Evil
(use-package evil
:straight (:build t)
:init
(setq evil-want-integration t)
(setq evil-want-keybinding nil)
(setq evil-want-C-u-scroll t)
(setq evil-want-C-i-jump nil)
:config
(evil-mode 1)
(setq evil-want-fine-undo t) ; more granular undo with evil
(setq evil-undo-system 'undo-tree)
(evil-set-initial-state 'messages-buffer-mode 'normal)
(evil-set-initial-state 'dashboard-mode 'normal)
;; Use visual line motions even outside of visual-line-mode buffers
(evil-global-set-key 'motion "t" 'evil-next-visual-line)
(evil-global-set-key 'motion "s" 'evil-previous-visual-line)
(define-key evil-normal-state-map "c" nil)
(define-key evil-normal-state-map "C" nil)
(define-key evil-normal-state-map "t" nil)
(define-key evil-normal-state-map "T" nil)
(define-key evil-normal-state-map "s" nil)
(define-key evil-normal-state-map "S" nil)
(define-key evil-normal-state-map "r" nil)
(define-key evil-normal-state-map "R" nil)
(define-key evil-normal-state-map "h" nil)
(define-key evil-normal-state-map "H" nil)
(define-key evil-normal-state-map "j" nil)
(define-key evil-normal-state-map "J" nil)
(define-key evil-normal-state-map "k" nil)
(define-key evil-normal-state-map "K" nil)
(define-key evil-normal-state-map "l" nil)
(define-key evil-normal-state-map "L" nil)
(define-key evil-motion-state-map "h" 'evil-replace)
(define-key evil-motion-state-map "H" 'evil-replace-state)
(define-key evil-motion-state-map "j" 'evil-find-char-to)
(define-key evil-motion-state-map "J" 'evil-find-char-to-backward)
(define-key evil-motion-state-map "k" 'evil-substitute)
(define-key evil-motion-state-map "K" 'evil-smart-doc-lookup)
(define-key evil-motion-state-map "l" 'evil-change)
(define-key evil-motion-state-map "L" 'evil-change-line)
(define-key evil-motion-state-map "c" 'evil-backward-char)
(define-key evil-motion-state-map "C" 'evil-window-top)
(define-key evil-motion-state-map "t" 'evil-next-line)
(define-key evil-motion-state-map "T" 'evil-join)
(define-key evil-motion-state-map "s" 'evil-previous-line)
(define-key evil-motion-state-map "S" 'evil-lookup)
(define-key evil-motion-state-map "r" 'evil-forward-char)
(define-key evil-motion-state-map "R" 'evil-window-bottom)
)
(use-package evil-collection
:after evil
:straight (:build t)
:config
(evil-collection-init)) (use-package undo-tree
:straight (:build t)
:init
(global-undo-tree-mode))Hydra
(use-package hydra
:straight (:build t)
:defer t)Hydras
The following hydra allows me to quickly zoom in and out in the current buffer.
(defhydra hydra-zoom ()
"Zoom current buffer."
("t" text-scale-increase "zoom in")
("s" text-scale-decrease "zoom out")
("0" text-scale-adjust "reset")
("q" nil "finished" :exit t))This one allows me to quickly navigate between code blocks and interact with them. This code block was inspired by one you can find in Spacemacs.
(defhydra org-babel-transient ()
"
^Navigate^ ^Interact
^^^^^^^^^^^------------------------------------------
[_t_/_s_] navigate src blocs [_x_] execute src block
[_g_]^^ goto named block [_'_] edit src block
[_z_]^^ recenter screen [_q_] quit
"
("q" nil :exit t)
("t" org-babel-next-src-block)
("s" org-babel-previous-src-block)
("g" org-babel-goto-named-src-block)
("z" recenter-top-bottom)
("x" org-babel-execute-maybe)
("'" org-edit-special :exit t))
Similarly, this one is also inspired from Spacemacs and allows the
user to interact with the width of the buffer in writeroom.
(defhydra writeroom-buffer-width ()
"Change the width of a `writeroom-mode' buffer."
("q" nil :exit t)
("t" writeroom-increase-width "enlarge")
("s" writeroom-decrease-width "shrink")
("r" writeroom-adjust-width "adjust"))
Another similar one is for mu4e-view-mode that allows me to shrink or
grow the mu4e-headers buffer when viewing an email.
(defhydra mu4e-headers-split-adjust-width ()
"Change the width of a `mu4e-headers' buffer."
("q" nil :exit t)
("t" mu4e-headers-split-view-shrink "shrink")
("s" mu4e-headers-split-view-grow "enlarge"))Packages Configuration
Applications
Docker
(use-package docker
:defer t
:straight (:build t)) (use-package dockerfile-mode
:defer t
:straight (:build t)
:init
(put 'docker-image-name 'safe-local-variable #'stringp)
:mode "Dockerfile\\'")Elfeed
Email - Mu4e
(setq message-signature nil
mail-signature nil) (use-package mu4e
:after all-the-icons
:straight (:build t :location site)
:commands mu4e mu4e-compose-new
:bind (("C-x m" . mu4e-compose-new))
:init
(progn
(setq mu4e-completing-read-function 'completing-read
mu4e-use-fancy-chars t
mu4e-view-show-images t
message-kill-buffer-on-exit t
mu4e-org-support nil)
(let ((dir "~/Downloads/mu4e"))
(when (file-directory-p dir)
(setq mu4e-attachment-dir dir))))
:config
(progn
<<mu4e-keybindings>>
(setq mu4e-compose-signature nil)
(when (fboundp 'imagemagick-register-types)
(imagemagick-register-types))
(add-to-list 'mu4e-view-actions
'("View in browser" . mu4e-action-view-in-browser) t)
(require 'gnus-dired)
(setq gnus-dired-mail-mode 'mu4e-user-agent)
(add-hook 'mu4e-compose-mode-hook
(lambda () (use-hard-newlines t 'guess)))
(add-hook 'dired-mode-hook 'turn-on-gnus-dired-mode)
(add-hook 'mu4e-compose-mode-hook 'mml-secure-message-sign-pgpmime)
(setq mu4e-get-mail-command "mbsync -a"
mu4e-maildir "~/.mail"
mu4e-trash-folder "/Trash"
mu4e-refile-folder "/Archive"
mu4e-sent-folder "/Sent"
mu4e-drafts-folder "/Drafts"
mu4e-update-interval 60
mu4e-compose-format-flowed t
mu4e-view-show-addresses t
mu4e-sent-messages-behaviour 'sent
mu4e-hide-index-messages t
;; try to show images
mu4e-view-show-images t
mu4e-view-image-max-width 600
;; configuration for sending mail
message-send-mail-function #'smtpmail-send-it
smtpmail-stream-type 'starttls
message-kill-buffer-on-exit t ; close after sending
;; start with the first (default) context
mu4e-context-policy 'pick-first
;; compose with the current context, or ask
mu4e-compose-context-policy 'ask-if-none
;; use ivy
mu4e-completing-read-function #'ivy-completing-read
;; no need to ask
mu4e-confirm-quit t
mu4e-header-fields
'((:account . 12)
(:human-date . 12)
(:flags . 4)
(:from . 25)
(:subject)))
;; set mail user agent
(setq mail-user-agent 'mu4e-user-agent)
;; Use fancy icons
(setq mu4e-use-fancy-chars t
mu4e-headers-draft-mark `("D" . ,(all-the-icons-faicon "pencil":height 0.8))
mu4e-headers-flagged-mark `("F" . ,(all-the-icons-faicon "flag":height 0.8))
mu4e-headers-new-mark `("N" . ,(all-the-icons-faicon "rss":height 0.8))
mu4e-headers-passed-mark `("P" . ,(all-the-icons-faicon "check":height 0.8))
mu4e-headers-replied-mark `("R" . ,(all-the-icons-faicon "reply":height 0.8))
mu4e-headers-seen-mark `("S" . ,(all-the-icons-faicon "eye":height 0.8))
mu4e-headers-unread-mark `("u" . ,(all-the-icons-faicon "eye-slash":height 0.8))
mu4e-headers-trashed-mark `("T" . ,(all-the-icons-faicon "trash":height 0.8))
mu4e-headers-attach-mark `("a" . ,(all-the-icons-faicon "paperclip":height 0.8))
mu4e-headers-encrypted-mark `("x" . ,(all-the-icons-faicon "lock":height 0.8))
mu4e-headers-signed-mark `("s" . ,(all-the-icons-faicon "certificate":height 0.8)))
(setq mu4e-bookmarks
`((,(s-join " "
'("NOT flag:trashed"
"AND (maildir:/Inbox OR maildir:/Junk)"
"AND NOT to:CONLANG@LISTSERV.BROWN.EDU"
"AND NOT to:AUXLANG@LISTSERV.BROWN.EDU"
"AND NOT to:ateliers-emacs@framalistes.org"
"AND NOT to:ateliers-paris@emacs-doctor.com"
"AND NOT list:ateliers-emacs.framalistes.org"
"AND NOT list:ateliers-paris.emacs-doctor.com"))
"Inbox" ?i) ;; Inbox without the linguistics mailing lists
(,(s-join " "
'("NOT flag:trashed"
"AND (maildir:/Inbox OR maildir:/Junk)"
"AND (f:/.*up8\.edu|.*univ-paris8.*/"
"OR c:/.*up8\.edu|.*univ-paris8.*/"
"OR t:/.*up8\.edu|.*univ-paris8.*/)"))
"University" ?u) ;; University-related emails
(,(s-join " "
'("to:CONLANG@LISTSERV.BROWN.EDU"
"OR to:AUXLANG@LISTSERV.BROWN.EDU"))
"Linguistics" ?l) ;; linguistics mailing lists
(,(s-join " "
'("list:ateliers-emacs.framalistes.org"
"OR to:ateliers-paris@emacs-doctor.com"
"OR list:ateliers-paris.emacs-doctor.com"))
"Emacs" ?e) ;; Emacs mailing list
("maildir:/Sent" "Sent messages" ?s)
("flag:unread AND NOT flag:trashed" "Unread messages" ?U)
("date:today..now AND NOT flag:trashed" "Today's messages" ?t)
("date:7d..now AND NOT flag:trashed" "Last 7 days" ?w)
("date:1m..now AND NOT flag:trashed" "Last month" ?m)
("date:1y..now AND NOT flag:trashed" "Last year" ?y)
("flag:trashed AND NOT flag:trashed" "Trash" ?T)
("mime:image/* AND NOT flag:trashed" "Messages with images" ?p)))
;; Add a column to display what email account the email belongs to.
(add-to-list 'mu4e-header-info-custom
'(:account
:name "Account"
:shortname "Account"
:help "Which account this email belongs to"
:function
(lambda (msg)
(let ((maildir (mu4e-message-field msg :maildir)))
(format "%s" (substring maildir 1 (string-match-p "/" maildir 1)))))))
(setq smtpmail-smtp-server "mail.phundrak.com"
smtpmail-smtp-service 587
smtpmail-stream-type 'starttls
message-send-mail-function 'smtpmail-send-it)
(defun mu4e-action-open-as-pdf (msg)
"Export and open MSG as pdf."
(let* ((date (mu4e-message-field msg :date))
(infile (mu4e~write-body-to-html msg))
(outfile (format-time-string "/tmp/%Y-%m-%d-%H-%M-%S.pdf" date)))
(with-temp-buffer
(shell-command
(format "wkhtmltopdf %s %s" infile outfile) t))
(find-file outfile)))
(add-to-list 'mu4e-view-actions '("PDF view" . mu4e-action-open-as-pdf) t))) ;; Unbinding some stuff
(general-define-key
:keymaps '(mu4e-headers-mode-map mu4e-view-mode-map)
"s" nil)
(general-define-key
:states 'normal
:keymaps '(mu4e-headers-mode-map mu4e-view-mode-map)
"s" nil)
(general-define-key
:keymaps 'mu4e-view-mode-map
"SPC" nil
"S" nil
"r" nil
"c" nil)
(general-define-key
:keymaps 'mu4e-view-mode-map
:states 'normal
"SPC" nil
"S" nil
"r" nil
"c" nil
"gu" nil)
;; View
(general-define-key
:keymaps 'mu4e-view-mode-map
:states 'normal
)
(general-define-key
:states 'motion
:keymaps 'mu4e-view-mode-map
:prefix ","
"|" #'mu4e-view-pipe
"." '(mu4e-headers-split-adjust-width/body :wk "mu4e-headers width")
"a" '(nil :wk "attachments")
"a|" #'mu4e-view-pipe-attachment
"aa" #'mu4e-view-attachment-action
"ao" #'mu4e-view-open-attachment
"aO" #'mu4e-view-open-attachment-with
"c" '(nil :wk "compose")
"cc" #'mu4e-compose-new
"ce" #'mu4e-compose-edit
"cf" #'mu4e-compose-forward
"cr" #'mu4e-compose-reply
"cR" #'mu4e-compose-resend
"g" '(nil :wk "go to")
"gu" #'mu4e-view-go-to-url
"gX" #'mu4e-view-fetch-url
"l" #'mu4e-show-log
"m" '(nil :wk "mark")
"md" #'mu4e-view-mark-for-trash
"mD" #'mu4e-view-mark-for-delete
"mm" #'mu4e-view-mark-for-move
"mr" #'mu4e-view-mark-for-refile
"mR" #'mu4e-view-mark-for-read
"mu" #'mu4e-view-mark-for-unread
"mU" #'mu4e-view-mark-for-unmark
"t" '(nil :wk "thread")
"td" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(trash)))
:wk "Mark as trash")
"tD" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(delete)))
:wk "Mark as delete")
"tm" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(move)))
:wk "Mark as move")
"tr" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(refile)))
:wk "Mark as refile")
"tR" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(read)))
:wk "Mark as read")
"tu" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(unread)))
:wk "Mark as unread")
"tU" '((lambda ()
(interactive)
(mu4e-view-mark-thread '(unmark)))
:wk "Mark as unmark")
"T" '(nil :wk "toggle")
"Tc" #'mu4e-view-toggle-hide-cited
"Th" #'mu4e-view-toggle-html
"n" #'mu4e-view-headers-next
"N" #'mu4e-view-headers-next-unread
"p" #'mu4e-view-headers-prev
"P" #'mu4e-view-headers-prev-unread)
;; Headers
(general-define-key
:prefix ","
:keymaps 'mu4e-headers-mode-map
:states 'normal
"s" '(nil :wk "search")
"ss" #'swiper)
(general-define-key
:keymaps 'mu4e-headers-mode-map
:states 'motion
"t" #'evil-next-line
"s" #'evil-previous-line
"T" '((lambda ()
(interactive)
(mu4e-headers-mark-thread nil '(read)))
:wk "Mark as read"))
;; Message
(general-define-key
:states 'normal
:keymaps 'message-mode-map
:prefix ","
"," #'message-send-and-exit
"c" #'message-send-and-exit
"a" #'message-kill-buffer
"k" #'message-kill-buffer
"s" #'message-dont-send
"f" #'mml-attach-file) (use-package org-msg
:after (org mu4e)
:straight (:build t)
:hook (mu4e-compose-pre . org-msg-mode)
:general (:keymaps 'org-msg-edit-mode-map
:prefix ","
:states 'normal
"," #'message-send-and-exit
"c" #'message-send-and-exit
"a" #'message-kill-buffer
"k" #'message-kill-buffer
"s" #'message-dont-send
"f" #'org-msg-attach)
:config
(progn
(defun my/org-msg-signature-convert (orig-fun &rest args)
"Tweak my signature when replying as plain/text only."
(let ((res (apply orig-fun args)))
(when (equal (cadr args) '(text))
(setf (alist-get 'signature res)
(replace-regexp-in-string "\n+" "\n" org-msg-signature)))
res))
(advice-add 'org-msg-composition-parameters
:around 'my/org-msg-signature-convert)
(setq org-msg-startup "inlineimages"
org-msg-default-alternatives '((new . (text html))
(reply-to-html . (text html))
(reply-to-text . (text)))
org-msg-convert-citation t
org-msg-greeting-name-limit 3
org-msg-signature (format "\n--\n#+begin_signature\n%s\n#+end_signature"
(with-temp-buffer
(insert-file-contents mail-signature-file)
(buffer-string)))))) (use-package mu4e-alert
:straight (:build t)
:after mu4e)PDF Tools
(use-package pdf-tools
:defer t
:magic ("%PDF" . pdf-view-mode)
:straight (:build t)
:mode (("\\.pdf\\'" . pdf-view-mode))
:config
(progn
(with-eval-after-load 'pdf-view
(setq pdf-view-midnight-colors '("#d8dee9" . "#2e3440")))
(general-define-key
:keymaps 'pdf-view-mode-map
"SPC" nil)
(general-define-key
:keymaps 'pdf-view-mode-map
:states 'normal
"SPC" nil)
;; (define-key 'pdf-view-mode-map (kbd "SPC") nil)
(general-define-key
:states 'normal
:keymaps 'pdf-view-mode-map
"y" #'pdf-view-kill-ring-save
"t" #'evil-collection-pdf-view-next-line-or-next-page
"s" #'evil-collection-pdf-view-previous-line-or-previous-page))
(general-define-key
:states 'motion
:keymaps 'pdf-view-mode-map
:prefix "SPC"
"a" '(nil :which-key "annotations")
"aD" #'pdf-annot-delete
"at" #'pdf-annot-attachment-dired
"ah" #'pdf-annot-add-highlight-markup-annotation
"al" #'pdf-annot-list-annotations
"am" #'pdf-annot-markup-annotation
"ao" #'pdf-annot-add-strikeout-markup-annotation
"as" #'pdf-annot-add-squiggly-markup-annotation
"at" #'pdf-annot-add-text-annotation
"au" #'pdf-annot-add-underline-markup-annotation
"f" '(nil :which-key "fit")
"fw" #'pdf-view-fit-width-to-window
"fh" #'pdf-view-fit-height-to-window
"fp" #'pdf-view-fit-page-to-window
"s" '(nil :which-key "slice/search")
"sb" #'pdf-view-set-slice-from-bounding-box
"sm" #'pdf-view-set-slice-using-mouse
"sr" #'pdf-view-reset-slice
"ss" #'pdf-occur
"o" 'pdf-outline
"m" 'pdf-view-midnight-minor-mode)
:hook
(pdf-tools-enabled . pdf-view-midnight-minor-mode))Screenshot
(use-package screenshot
:defer t
:straight (screenshot :build t
:type git
:host github
:repo "tecosaur/screenshot"))Shells
Shell-pop
Shell-pop allows the user to easily call for a new shell in a pop-up buffer.
(use-package shell-pop
:defer t
:straight (:build t)
:custom
(shell-pop-default-directory "/home/phundrak")
(shell-pop-shell-type (quote ("eshell" "*eshell*" (lambda nil (eshell shell-pop-term-shell)))))
(shell-pop-window-size 30)
(shell-pop-full-span nil)
(shell-pop-window-position "bottom")
(shell-pop-autocd-to-working-dir t)
(shell-pop-restore-window-configuration t)
(shell-pop-cleanup-buffer-at-process-exit t))VTerm
(use-package vterm
:defer t
:straight t)Webkit browser
(general-define-key
:keymaps 'xwidget-webkit-mode-map
:states 'normal
"c" #'xwidget-webkit-scroll-backward
"t" #'xwidget-webkit-scroll-up
"s" #'xwidget-webkit-scroll-down
"r" #'xwidget-webkit-scroll-forward
"h" #'xwidget-webkit-goto-history
"j" nil
"k" nil
"l" nil
"H" nil
"L" nil
"T" #'xwidget-webkit-back
"S" #'xwidget-webkit-forward
"R" #'xwidget-webkit-reload)Wttr.in
(use-package wttrin
:defer t
:straight (wttrin :build t
:type git
;; :host github
;; :repo "Phundrak/emacs-wttrin"
:local-repo "~/fromGIT/emacs-packages/emacs-wttrin"
)
:config
(setq wttrin-default-cities '("Aubervilliers" "Paris" "Lyon" "Nonières"
"Saint Agrève")
wttrin-use-metric t))Autocompletion
Code Autocompletion
(use-package company
:straight (:build t)
:defer t
:hook (company-mode . evil-normalize-keymaps)
:init (global-company-mode)
:config
(setq company-minimum-prefix-length 2
company-toolsip-limit 14
company-tooltip-align-annotations t
company-require-match 'never
company-global-modes '(not erc-mode message-mode help-mode gud-mode)
company-frontends
'(company-pseudo-tooltip-frontend ; always show candidates in overlay tooltip
company-echo-metadata-frontend) ; show selected candidate docs in echo area
;; Buffer-local backends will be computed when loading a major
;; mode, so only specify a global default here.
company-backends '(company-capf)
;; These auto-complete the current selection when
;; `company-auto-complete-chars' is typed. This is too
;; magical. We already have the much more explicit RET and
;; TAB.
company-auto-complete nil
company-auto-complete-chars nil
;; Only search the current buffer for `company-dabbrev' (a
;; backend that suggests text you open buffers). This prevents
;; Company from causing lag once you have a lot of buffers
;; open.
company-dabbrev-other-buffers nil
;; Make `company-dabbrev' fully case-sensitive, to improve UX
;; with domai-specific words with particular casing.
company-dabbrev-ignore-case nil
company-dabbrev-downcase nil))
(use-package company-dict
:after company
:straight (:build t)
:config
(setq company-dict-dir (expand-file-name "dicts" user-emacs-directory)))
(use-package company-box
:straight (:build t)
:after (company all-the-icons)
:config
(setq company-box-show-single-candidate t
company-box-backends-colors nil
company-box-max-candidates 50
company-box-icons-alist 'company-box-icons-all-the-icons
company-box-icons-all-the-icons
(let ((all-the-icons-scale-factor 0.8))
`((Unknown . ,(all-the-icons-material "find_in_page" :face 'all-the-icons-purple))
(Text . ,(all-the-icons-material "text_fields" :face 'all-the-icons-green))
(Method . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Function . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Constructor . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Field . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Variable . ,(all-the-icons-material "adjust" :face 'all-the-icons-blue))
(Class . ,(all-the-icons-material "class" :face 'all-the-icons-red))
(Interface . ,(all-the-icons-material "settings_input_component" :face 'all-the-icons-red))
(Module . ,(all-the-icons-material "view_module" :face 'all-the-icons-red))
(Property . ,(all-the-icons-material "settings" :face 'all-the-icons-red))
(Unit . ,(all-the-icons-material "straighten" :face 'all-the-icons-red))
(Value . ,(all-the-icons-material "filter_1" :face 'all-the-icons-red))
(Enum . ,(all-the-icons-material "plus_one" :face 'all-the-icons-red))
(Keyword . ,(all-the-icons-material "filter_center_focus" :face 'all-the-icons-red))
(Snippet . ,(all-the-icons-material "short_text" :face 'all-the-icons-red))
(Color . ,(all-the-icons-material "color_lens" :face 'all-the-icons-red))
(File . ,(all-the-icons-material "insert_drive_file" :face 'all-the-icons-red))
(Reference . ,(all-the-icons-material "collections_bookmark" :face 'all-the-icons-red))
(Folder . ,(all-the-icons-material "folder" :face 'all-the-icons-red))
(EnumMember . ,(all-the-icons-material "people" :face 'all-the-icons-red))
(Constant . ,(all-the-icons-material "pause_circle_filled" :face 'all-the-icons-red))
(Struct . ,(all-the-icons-material "streetview" :face 'all-the-icons-red))
(Event . ,(all-the-icons-material "event" :face 'all-the-icons-red))
(Operator . ,(all-the-icons-material "control_point" :face 'all-the-icons-red))
(TypeParameter . ,(all-the-icons-material "class" :face 'all-the-icons-red))
(Template . ,(all-the-icons-material "short_text" :face 'all-the-icons-green))
(ElispFunction . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(ElispVariable . ,(all-the-icons-material "check_circle" :face 'all-the-icons-blue))
(ElispFeature . ,(all-the-icons-material "stars" :face 'all-the-icons-orange))
(ElispFace . ,(all-the-icons-material "format_paint" :face 'all-the-icons-pink))))))Ivy
My main menu package is ivy which I use as much as possible –I’ve
noticed helm can be slow, very slow in comparison to ivy so I’ll use
the latter as much as possible. Actually, only ivy is installed for
now. I could have used ido too, but I find it to be a bit too
restricted in terms of features compared to ivy.
(use-package ivy
:straight (:build t)
:defer t
:diminish
:bind (("C-s" . swiper)
:map ivy-minibuffer-map
("TAB" . ivy-alt-done)
("C-l" . ivy-alt-done)
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
:map ivy-switch-buffer-map
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
("C-l" . ivy-done)
("C-d" . ivy-switch-buffer-kill)
:map ivy-reverse-i-search-map
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
("C-d" . ivy-reverse-i-search-kill))
:config
(ivy-mode 1)
(setq ivy-wrap t
ivy-height 17
ivy-sort-max-size 50000
ivy-fixed-height-minibuffer t
ivy-read-action-functions #'ivy-hydra-read-action
ivy-read-action-format-function #'ivy-read-action-format-columns
projectile-completion-system 'ivy
ivy-on-del-error-function #'ignore
ivy-use-selectable-prompt t))
There is also prescient.el that offers some nice features when
coupled with ivy, guess what was born out of it? ivy-prescient, of
course!
(use-package ivy-prescient
:after ivy
:straight (:build t))
I warned you I’d use too much all-the-icons, I did!
(use-package all-the-icons-ivy
:straight (:build t)
:after (ivy all-the-icons)
:hook (after-init . all-the-icons-ivy-setup))A buffer popping at the bottom of the screen is nice and all, but have you considered a floating buffer in the center of your frame?
(use-package ivy-posframe
:defer t
:hook (ivy-mode . ivy-posframe-mode)
:straight (ivy-posframe :build t
:type git
:host github
:repo "tumashu/ivy-posframe")
:config
(setq ivy-fixed-height-minibuffer nil
ivy-posframe-border-width 10
ivy-posframe-parameters
`((min-width . 90)
(min-height . ,ivy-height))))
Finally, let’s make ivy richer:
(use-package ivy-rich
:straight (:build t)
:after ivy
:init
(ivy-rich-mode 1))Counsel
(use-package counsel
:straight (:build t)
:defer t
:bind (("M-x" . counsel-M-x)
("C-x b" . counsel-ibuffer)
("C-x C-f" . counsel-find-file)
:map minibuffer-local-map
("C-r" . 'counsel-minibuffer-history)))Yasnippet
(use-package yasnippet
:defer t
:straight (:build t)
:init
(yas-global-mode)) (use-package yasnippet-snippets
:after yasnippet
:straight (:build t)) (use-package yatemplate
:after yasnippet
:straight (:build t)) (use-package ivy-yasnippet
:after (ivy yasnippet)
:straight (:build t))Editing
Evil Nerd Commenter
(use-package evil-nerd-commenter
:after evil
:straight (:build t))string-edit
string-edit is a cool package that allows the user to write naturally
a string and get it automatically escaped for you. No more manually
escaping your strings!
(use-package string-edit
:defer t
:straight (:build t))Writeroom
On the other hand, writeroom allows the user to enter a
distraction-free mode of Emacs, and I like that!
(use-package writeroom-mode
:defer t
:straight (:build t))Emacs built-ins
Dired
(setq dired-dwim-target t)Eshell
Eshell is a built-in shell available from Emacs which I use almost as often as fish. Some adjustments are necessary to make it fit my taste though.
(general-define-key
:keymaps 'eshell-mode-map
:states 'insert
"C-a" #'eshell-bol
"C-e" #'end-of-line)Aliases
First, let’s declare our list of “dumb” aliases we’ll use in Eshell. You can find them here.
(setq eshell-aliases-file (expand-file-name "eshell-aliases" user-emacs-directory))A couple of other aliases will be defined through custom Elisp functions, but first I’ll need a function for concatenating a shell command into a single string:
(defun phundrak/concatenate-shell-command (&rest command)
"Concatenate an eshell `COMMAND' into a single string.
All elements of `COMMAND' will be joined in a single
space-separated string."
(string-join command " "))
I’ll also declare some aliases here, such as open and openo that
respectively allow me to open a file in Emacs, and same but in another
window.
(defalias 'open 'find-file)
(defalias 'openo 'find-file-other-window)
As you see, these were not declared in my dedicated aliases file but
rather were declared programmatically. This is because I like to keep
my aliases file for stuff that could work too with other shells were
the syntax a bit different, and aliases related to Elisp are kept
programmatically. I’ll also declare list-buffers an alias of ibuffer
because naming it that way kind of makes more sense to me.
(defalias 'list-buffers 'ibuffer)
I still have some stupid muscle memory telling me to open emacs, vim
or nano in Eshell, which is stupid: I’m already inside Emacs and I
have all its power available instantly. So, let’s open each file
passed to these commands.
(defun eshell/emacs (&rest file)
"Open each `FILE' and kill eshell.
Old habits die hard."
(when file
(dolist (f (reverse file))
(find-file f t))))
Finally, I’ll declare mkcd which allows the simultaneous creation of a
directory and moving into this newly created directory. And of course,
it will also work if the directory also exists or if parent
directories don’t, similarly to the -p option passed to mkdir.
(defun eshell/mkcd (dir)
"Create the directory `DIR' and move there.
If the directory `DIR' doesn’t exist, create it and its parents
if needed, then move there."
(mkdir dir t)
(cd dir))Custom Functions
When I’m in Eshell, sometimes I wish to open multiple files at once in
Emacs. For this, when I have several arguments for find-file, I want
to be able to open them all at once. Let’s modify find-file like so:
(defadvice find-file (around find-files activate)
"Also find all files within a list of files. This even works recursively."
(if (listp filename)
(cl-loop for f in filename do (find-file f wildcards))
ad-do-it))
I also want to be able to have multiple instances of Eshell opened at
once. For that, I declared the function eshell-new that does exactly
that.
(defun eshell-new ()
"Open a new instance of eshell."
(interactive)
(eshell 'N))Environment Variables
Some environment variables need to be correctly set so Eshell can correctly
work. The first environment variable to be set is the PATH, as I have a couple
of directories where executables are located. Let’s add them to our
path if they aren’t already.
| Path | Relative to HOME? |
|---|---|
| .pub-cache/bin | yes |
| .local/bin | yes |
| .cargo/bin | yes |
| .gen/ruby/2.6.0/bin | yes |
| go/bin | yes |
PATH
(setenv "PATH" "<<src-eshell-env-path()>>")
I would also like to set two environment variables related to Dart development:
the DART_SDK and ANDROID_HOME variables.
(setenv "DART_SDK" "/opt/dart-sdk/bin")
(setenv "ANDROID_HOME" (concat (getenv "HOME") "/Android/Sdk/"))
The EDITOR variable also needs to be set for git commands, especially the
yadm commands.
(setenv "EDITOR" "emacsclient -c")
Finally, for some specific situations I need SHELL to be set to
something more standard than fish:
(setenv "SHELL" "/bin/sh")Visual configuration
I like to have at quick glance some information about my machine when I fire up a terminal. I haven’t found anything that does that the way I like it, so I’ve written a package!
(use-package eshell-info-banner
:defer t
:straight (eshell-info-banner :build t
:type git
:host github
:repo "phundrak/eshell-info-banner.el")
:hook (eshell-banner-load . eshell-info-banner-update-banner)
:config
(setq eshell-info-banner-width 80
eshell-info-banner-partition-prefixes '("/dev" "zroot" "tank")))Org-mode
(use-package org
:straight (:build (:not autoloads) :location site)
:after general
:hook (org-mode . visual-line-mode)
:hook (org-mode . org-num-mode)
:init
;; (add-hook 'org-mode-hook #'visual-line-mode)
(auto-fill-mode -1)
:general
(:states 'normal
:prefix ","
:keymaps 'org-mode-map
"RET" #'org-ctrl-c-ret
"*" #'org-ctrl-c-star
"," #'org-ctrl-c-ctrl-c
"'" #'org-edit-special
"-" #'org-ctrl-c-minus
"a" #'org-agenda
"c" #'org-capture
"l" #'org-store-link
"p" #'org-priority
"b" '(:ignore t :wk "babel")
"b." #'org-babel-transient/body
"bb" #'org-babel-execute-buffer
"bc" #'org-babel-check-src-block
"bC" #'org-babel-tangle-clean
"be" #'org-babel-execute-maybe
"bf" #'org-babel-tangle-file
"bn" #'org-babel-next-src-block
"bo" #'org-babel-open-src-block-result
"bp" #'org-babel-previous-src-block
"br" #'org-babel-goto-named-result
"bR" #'org-babel-remove-result-one-or-many
"bt" #'org-babel-tangle
"bi" #'org-babel-view-src-block-info
"d" '(:ignore t :wk "dates")
"dd" #'org-deadline
"ds" #'org-schedule
"dt" #'org-time-stamp
"dT" #'org-time-stamp-inactive
"e" '(:ignore t :wk "export")
"ee" #'org-export-dispatch
"i" '(:ignore t :wk "insert")
"ib" #'org-insert-structure-template
"id" #'org-insert-drawer
"ie" #'org-set-effort
"if" #'org-footnote-new
"ih" #'org-insert-heading
"ii" #'org-insert-item
"il" #'org-insert-link
"in" #'org-add-note
"ip" #'org-set-property
"is" #'org-insert-subheading
"it" #'org-set-tags-command
"j" '(:ignore t :wk "jump")
"ja" #'counsel-org-goto-all
"jh" #'counsel-org-goto
"t" '(:ignore t :wk "tables")
"ta" #'org-table-align
"te" #'org-table-eval-formula
"tf" #'org-table-field-info
"th" #'org-table-convert
"tl" #'org-table-recalculate
"ts" #'org-table-sort-lines
"tw" #'org-table-wrap-region
"tN" #'org-table-create-with-table.el
"tc" #'org-table-previous-field
"tr" #'org-table-next-field
"tC" #'org-table-move-column-left
"tT" #'org-table-move-row-down
"tS" #'org-table-move-row-up
"tR" #'org-table-move-column-right
"td" '(:ignore t :wk "delete")
"tdc" #'org-table-delete-column
"tdr" #'org-table-kill-row
"ti" '(:ignore t :wk "insert")
"tic" #'org-table-insert-column
"tih" #'org-table-insert-hline
"tir" #'org-table-insert-row
"tiH" #'org-table-hline-and-move
"tt" '(:ignore t :wk "toggle")
"ttf" #'org-table-toggle-formula-debugger
"tto" #'org-table-toggle-coordinate-overlays
"T" '(:ignore t :wk "toggle")
"Tc" #'org-toggle-checkbox
"Ti" #'org-toggle-inline-images
"Tl" #'org-latex-preview
"Tn" #'org-num-mode
"Ts" 'phundrak/toggle-org-src-window-split
"Tt" #'org-show-todo-tree
"TT" #'org-todo)
(:states 'normal
:keymaps 'org-src-mode-map
:prefix ","
"'" #'org-edit-src-exit
"k" #'org-edit-src-abort)
:config
(progn
(setq org-hide-leading-stars nil
org-superstar-leading-bullet ?\s
org-hide-macro-markers t
org-ellipsis " ⤵"
org-image-actual-width 550
org-redisplay-inline-images t
org-display-inline-images t
org-startup-with-inline-images "inlineimages"
org-pretty-entities t
org-fontify-whole-heading-line t
org-fontify-done-headline t
org-fontify-quote-and-verse-blocks t
org-startup-indented t
org-startup-align-all-tables t
org-use-property-inheritance t
org-list-allow-alphabetical t
org-M-RET-may-split-line nil
org-src-window-setup 'split-window-below)
<<org-agenda-files>>
<<org-use-sub-superscripts>>
<<org-latex-compiler>>
<<org-latex-listings>>
<<org-latex-default-packages>>
<<org-export-latex-hyperref-format>>
<<org-latex-pdf-process>>
<<org-re-reveal-root>>
<<org-html-validation>>
<<org-latex-classes>>
<<org-publish-projects>>
)) (use-package evil-org
:straight (:build t)
:after org
:hook (org-mode . evil-org-mode)
:config
;; (dolist (key '("h" "j" "k" "l"))
;; (define-key org-mode-map (kbd (format "M-%s" key)) 'undefined))
(setq-default evil-org-movement-bindings
'((up . "s")
(down . "t")
(left . "c")
(right . "r")))
(evil-org-set-key-theme '(textobjects navigation calendar additional shift operators))
(require 'evil-org-agenda)
(evil-org-agenda-set-keys))
Since very recently, the contrib/lisp/ directory of org moved out of
the main repository to this repository. On the other hand,
contrib/scripts/ moved to the worg repository, but I don’t need
it. The main reason I want org-contrib is due to ox-extra that allow
the usage of the :ignore: tag in org.
(use-package org-contrib
:straight (:build t)
:init
(require 'ox-extra)
(ox-extras-activate '(latex-header-blocks ignore-headlines)))Agenda
(setq-default org-agenda-files (list "~/org/agenda" "~/org/notes.org"))Behavior
A useful package I like is toc-org which creates automatically a table
of contents. My main usage for this however is not just to create a
table of content of my files to quickly jump around my file (I have
counsel-org-goto for that), but it is for creating table of contents
for org files that will be hosted and viewable on Github.
(use-package toc-org
:after org
:straight (:build t)
:init
(add-to-list 'org-tag-alist '("TOC" . ?T))
:hook (org-mode . toc-org-mode)
:hook (markdown-mode . toc-org-mode))Babel
A package I use from time to time is ob-latex-as-png which allows me
to easily convert a LaTeX snippet into a PNG, regardless of the
exporter I use afterwards. Its installation is pretty simple:
(use-package ob-latex-as-png
:defer t
:straight (:build t))File export
I want to disable by default behavior of ^ and _ for only one
character, making it compulsory to use instead ^{} and _{}
respectively. This is due to my frequent usage of the underscore in my
org files as a regular character and not a markup one, especially when
describing phonetics evolution. So, let’s disable it:
(setq org-use-sub-superscripts (quote {}))LaTeX
When it comes to exports, I want the LaTeX and PDF exports to be done with XeLaTeX only. This implies the modification of the following variable:
(setq org-latex-compiler "xelatex")
I also want to get by default minted for LaTeX listings so I can have
syntax highlights:
(setq org-latex-listings 'minted)
The default packages break my LaTeX exports: for some reasons, images
are not loaded and exported in PDFs, so I needed to redifine the
default packages excluding the one that broke my exports. I also added
a default package, minted for syntax highlighting.
(setq org-latex-default-packages-alist '(("" "graphicx" t)
("T1" "fontspec" t ("pdflatex"))
("" "longtable" nil)
("" "wrapfig" nil)
("" "rotating" nil)
("normalem" "ulem" t)
("" "amsmath" t)
("" "textcomp" t)
("" "amssymb" t)
("" "capt-of" nil)
("" "minted" nil)
("" "hyperref" nil)))By the way, reference links in LaTeX should be written in this format:
(setq org-export-latex-hyperref-format "\\ref{%s}")When it comes to the export itself, the latex file needs to be processed several times through XeLaTeX in order to get some references right. Don’t forget to also run bibtex!
(setq org-latex-pdf-process
'("xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"
"bibtex %b"
"xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"
"xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"))Finally, org-mode is supposed to automatically clean logfiles after it exports an org file to LaTeX. However, it misses a few, so I need to add their extension like so:
(dolist (ext '("bbl" "lot"))
(add-to-list 'org-latex-logfiles-extensions ext t))HTML
For Reveal.JS exports, I need to set where to find the framework by default:
(setq org-re-reveal-root "https://cdn.jsdelivr.net/npm/reveal.js")On HTML exports, Org-mode tries to include a validation link for the exported HTML. Let’s disable that since I never use it.
(setq org-html-validation-link nil)LaTeX formats
I currently have two custom formats for my Org-mode exports: one for general use
(initialy for my conlanging files, hence its conlang name), and one for beamer
exports.
Below is the declaration of the conlang LaTeX class:
'("conlang"
"\\documentclass{book}"
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
And here is the declaration of the beamer class:
`("beamer"
,(concat "\\documentclass[presentation]{beamer}\n"
"[DEFAULT-PACKAGES]"
"[PACKAGES]"
"[EXTRA]\n")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
Both these classes have to be added to org-latex-classes like so:
(eval-after-load "ox-latex"
'(progn
(add-to-list 'org-latex-classes
<<org-latex-class-conlang>>
)
(add-to-list 'org-latex-classes
<<org-latex-class-beamer>>
)))Projects
Another great features of Org-mode is the Org projects that allow the user to easily publish a bunch of org files to a remote location. Here is the current declaration of my projects, which will be detailed later:
<<org-proj-config-setup>>
<<org-proj-lang-setup>>
(setq org-publish-project-alist
`(
<<org-proj-config-html>>
<<org-proj-config-static>>
<<org-proj-config>>
<<org-proj-lang-html>>
<<org-proj-lang-pdf>>
<<org-proj-lang-static>>
<<org-proj-lang>>))Configuration website
This is my configuration for exporting my dotfiles to my website in a web format only. No PDFs or anything, just HTML. Please note that I do not use that often anymore, I much prefer the automatic script that I have which deploys through my Drone instance my website on git pushes.
And before we get into the actual configuration, I would like to introduce a couple of variables. This is a bit more verbose than if I declared everything manually, but now I can change all three values at the same time without a hasle.
(defvar phundrak//projects-config-target
"/rsync:Tilo:~/www/phundrak.com/config"
"Points to where exported files for config.phundrak.com should be put")
(defvar phundrak//projects-config-source
"~/org/config/"
"Points to where the sources for config.phundrak.com are")
(defvar phundrak//projects-config-language
"en"
"Language of config.phundrak.com")
(defvar phundrak//projects-config-recursive
t
"Defines whether subdirectories should be parsed for config.phundrak.com")Now, here is my configuration. In this snippet, my org files located in my source directory get exported in the HTML format and published to my target directory on my remote server through RSYNC via TRAMP. A sitemap is automatically generated, which comes in handy with the online sitemap that is available through the navigation bar.
("config-website-org"
:base-directory ,phundrak//projects-config-source
:base-extension "org"
:publishing-directory ,phundrak//projects-config-target
:recursive ,phundrak//projects-config-recursive
:language ,phundrak//projects-config-language
:publishing-function org-html-publish-to-html
:headline-levels 5
:auto-sitemap t
:auto-preamble t)We also have the component for all the static files needed to run the website (mostly images tbh).
("config-website-static"
:base-directory ,phundrak//projects-config-source
:base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub\\|md"
:publishing-directory ,phundrak//projects-config-target
:recursive ,phundrak//projects-config-recursive
:language ,phundrak//projects-config-language
:publishing-function org-publish-attachment)The project is then defined like so:
("config-website"
:components ("config-website-org"
"config-website-static"))Linguistics website
My linguistics website is made out of three projects. As for the previous project, let’s declare the common values for these.
(defvar phundrak//projects-conlanging-target
"/rsync:Tilo:~/www/phundrak.com/langue/"
"Points to where exported files for langue.phundrak.com should be put")
(defvar phundrak//projects-conlanging-source
"~/Documents/conlanging/content/"
"Points to where the sources for langue.phundrak.com are")
(defvar phundrak//projects-conlanging-language
"fr"
"Language of langue.phundrak.com")
(defvar phundrak//projects-conlanging-recursive
t
"Defines whether subdirectories should be parsed for langue.phundrak.com")The first component is the one generating the HTML files from the org files.
("langue-phundrak-com-org"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "org"
:exclude "\\./\\(CONTRIB\\|README\\|head\\|temp\\|svg-ink\\).*"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-html-publish-to-html
:headline-levels 5
:auto-sitemap t
:auto-preamble t)We also have the component for the LaTeX and PDF part of the website:
("langue-phundrak-com-pdf"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "org"
:exclude "\\./\\(CONTRIB\\|README\\|index\\|head\\|temp\\|svg-ink\\).*"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-latex-publish-to-pdf
:headline-levels 5
:auto-preamble t)And lastly, we have the component for all the static files needed to run the website:
("langue-phundrak-com-static"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-publish-attachment)The project is then defined like so:
("langue-phundrak-com"
:components ("langue-phundrak-com-org"
"langue-phundrak-com-static"
"langue-phundrak-com-pdf"))Visual Configuration
While most modes of Emacs are dedicated to development, and therefore
are much more comfortable with a fixed-pitch font, more literary modes
such as org-mode are much more enjoyable if you have a variable pitch
font enabled. BUT, these modes can also require some fixed-pitch fonts
for some elements of the buffer, such as code blocks with
org-mode. mixed-pitch comes to the rescue!
(use-package mixed-pitch
:after org
:straight t
:hook
(org-mode . mixed-pitch-mode)
:config
(add-hook 'org-agenda-mode-hook (lambda () (mixed-pitch-mode -1))))
I have an issue with org-mode’s emphasis markers: I find them ugly. I
can of course hide them if I simply set org-hide-emphasis-markers to
t, but it makes editing hard since I never know whether I am before or
after the emphasis marker when editing near the beginning/end of an
emphasized region. org-appear fixes this issue so that it shows the
emphasis markers only when the cursor is in the emphasized region,
otherwise they will remain hidden! Very cool!
(use-package org-appear
:after org
:straight (:build t)
:hook (org-mode . org-appear-mode)
:config
(setq org-appear-autoemphasis t
org-hide-emphasis-markers t
org-appear-autolinks t
org-appear-autoentities t
org-appear-autosubmarkers t)
(run-at-time nil nil #'org-appear--set-elements))
Tired of seeing lots of actual stars * in your headers, and you want a
fancier remplacement? Or you are still using org-bullets but just
found out how out-of-date and abandoned it is? (Last commit was on
September 18th, 2014… damn…) Search no more, org-superstar will take
care of that for you!
(use-package org-superstar
:after org
:straight (:build t)
:hook (org-mode . org-superstar-mode)
:config
(setq org-superstar-leading-bullet ?\s
org-superstar-leading-fallback ?\s
org-hide-leading-stars nil
org-superstar-todo-bullet-alist
'(("TODO" . 9744)
("[ ]" . 9744)
("DONE" . 9745)
("[X]" . 9745))))
org-fancy-priorities change the priority of an org element such such
as #A to anything user-defined. Let’s make this anything all-the-icons
icons!
(use-package org-fancy-priorities
:after (org all-the-icons)
:straight (:build t)
:hook (org-mode . org-fancy-priorities-mode)
:hook (org-agenda-mode . org-fancy-priorities-mode)
:config
(setq org-fancy-priorities-list `(,(all-the-icons-faicon "flag" :height 1.1 :v-adjust 0.0)
,(all-the-icons-faicon "arrow-up" :height 1.1 :v-adjust 0.0)
,(all-the-icons-faicon "square" :height 1.1 :v-adjust 0.0))))
Finally, org-sticky-header-mode reminds you where you are in your org
files at the top of your window.
(use-package org-sticky-header
:straight (:build t)
:after org
:hook (org-mode . org-sticky-header-mode))Tramp
Tramp is an Emacs built-in package that allows the user to connect to
various hosts using various protocols, such as ssh and
rsync. However, I have some use-case for Tramp which are not
supported natively. I will describe them here.
(require 'tramp)Yadm
yadm is a git wrapper made to easily manage your dotfiles. It has
loads of features I don’t use (the main one I like but don’t use is
its Jinja-like host and OS-aware syntax), but unfortunately Magit
doesn’t play nice with it. Tramp to the rescue, and this page explains
how! Let’s just insert in my config this code snippet:
(add-to-list 'tramp-methods
'("yadm"
(tramp-login-program "yadm")
(tramp-login-args (("enter")))
(tramp-login-env (("SHELL") ("/bin/sh")))
(tramp-remote-shell "/bin/sh")
(tramp-remote-shell-args ("-c"))))I’ll also create a fuction for connecting to this new Tramp protocol:
(defun my/yadm ()
"Manage my dotfiles through TRAMP."
(interactive)
(magit-status "/yadm::"))Making my life easier
Bufler
Bufler is a package that organizes and lists buffers in a much better
way than how they are usually sorted. You can easily and quickly find
buffers by their group, not only by their name, and THIS is great
news! Also, no helm please! And for some reasons the keybindings are
borked by default, so let’s redefine them, and let’s also rebind SPC
to p since it would conflict with my main general prefix.
(use-package bufler
:straight (bufler :build t
:files (:defaults (:exclude "helm-bufler.el")))
:defer t
:general
(:keymaps 'bufler-list-mode-map
:states 'normal
"?" #'hydra:bufler/body
"g" #'bufler
"f" #'bufler-list-group-frame
"F" #'bufler-list-group-make-frame
"N" #'bufler-list-buffer-name-workspace
"k" #'bufler-list-buffer-kill
"p" #'bufler-list-buffer-peek
"s" #'bufler-list-buffer-save
"RET" #'bufler-list-buffer-switch))Helpful
As the name tells, helpful is a really helpful package which greatly
enhances a couple of built-in functions from Emacs, namely:
| Vanilla Emacs Function | Helpful Function | Comment |
|---|---|---|
describe-function |
helpful-callable |
Only interactive functions |
describe-function |
helpful-function |
Only actual functions (including interactive) |
describe-function |
helpful-macro |
|
describe-command |
helpful-command |
|
describe-key |
helpful-key |
|
describe-variable |
helpful-variable |
(use-package helpful
:straight (:build t)
:after (counsel ivy)
:custom
(counsel-describe-function-function #'helpfull-callable)
(counsel-describe-variable-function #'helpfull-variable)
:bind
([remap describe-function] . counsel-describe-function)
([remap describe-command] . helpful-command)
([remap describe-variable] . counsel-describe-variable)
([remap describe-key] . helpful-key))Project Management
Magit
Magit is an awesome wrapper around Git for Emacs! Very often, I go from disliking to really hating Git GUI clients because they often obfuscate which Git commands are used to make things happen. Such a thing doesn’t happen with Magit, it’s pretty transparent but it still provides some awesome features and visualizations of what you are doing and what Git is doing! In short, I absolutely love it!
(use-package magit
:straight (:build t)
:defer t
:custom
(magit-display-buffer-function #'magit-display-buffer-same-window-except-diff-v1)
:config
(progn
(general-define-key
:keymaps '(git-rebase-mode-map)
"C-t" #'evil-next-line
"C-s" #'evil-previous-line)
(general-define-key
:keymaps 'git-rebase-mode-map
:state 'normal
:prefix ","
"," #'with-editor-finish
"k" #'with-editor-cancel
"a" #'with-editor-cancel)))Alphapapa also created an awesome package for Magit: magit-todos which display in the Magit buffer a list of TODOs found in the current project to remind you of what to do next.
(use-package magit-todos
:straight (:build t)
:after magit
:config
(setq magit-todos-ignore-case t))Forge
NOTE: Make sure to configure a GitHub token before using this package!
(use-package forge
:after magit
:straight (:build t))Projectile
(use-package projectile
:straight (:build t)
:defer t
:diminish projectile-mode
:config (projectile-mode)
:custom ((projectile-completion-system 'ivy))
:bind-keymap
("C-c p" . projectile-command-map)
:init
;; NOTE: Set this to the folder where you keep your Git repos!
(setq projectile-switch-project-action #'projectile-dired))
(use-package counsel-projectile
:straight (:build t)
:after (counsel projectile)
:config (counsel-projectile-mode))Programming languages
DSLs
DSLs, or Domain Specific Languages, are languages dedicated to some very tasks, such as configuration languages or non-general programming such as SQL.
Shells
Aside from Eshell, my main shell on my machine is fish (see my fish config), therefore I need a mode for it.
(use-package fish-mode
:straight (:build t)
:defer t)Caddy
Caddy (or Caddyserver) is a web server akin to Nginx or Apache which I find much easier to configure that the latter two, plus it has built-in support for automatically generating SSL certificates with Letsencrypt! Automatic HTTPS, what more do you want?
All that is nice and all, but Emacs doesn’t support the syntax of
Caddy files natively, so let’s install caddyfile-mode:
(use-package caddyfile-mode
:defer t
:straight (:build t)
:mode (("Caddyfile\\'" . caddyfile-mode)
("caddy\\.conf\\'" . caddyfile-mode)))Nginx
Nginx is another webserver, older and more mature than Caddy. A couple of packages are required in order to be able to properly work with Nginx configuration files. First, we need the correct mode for editing Nginx configuration files.
(use-package nginx-mode
:straight (:build t)
:defer t)
We then also have an autocompletion package that adds to company the
Nginx syntax.
(use-package company-nginx
:straight (:build t)
:defer t
:config
(add-hook 'nginx-mode-hook (lambda ()
(add-to-list 'company-backends #'company-nginx))))Yaml
(use-package yaml-mode
:defer t
:straight (:build t)
:mode "\\.yml\\'"
:mode "\\.yaml\\'")Flycheck
(use-package flycheck
:straight (:build t)
:defer t
:init
(global-flycheck-mode)
:config
(setq flycheck-emacs-lisp-load-path 'inherit)
;; Rerunning checks on every newline is a mote excessive.
(delq 'new-line flycheck-check-syntax-automatically)
;; And don’t recheck on idle as often
(setq flycheck-idle-change-delay 2.0)
;; For the above functionality, check syntax in a buffer that you
;; switched to on briefly. This allows “refreshing” the syntax check
;; state for several buffers quickly after e.g. changing a config
;; file.
(setq flycheck-buffer-switch-check-intermediate-buffers t)
;; Display errors a little quicker (default is 0.9s)
(setq flycheck-display-errors-delay 0.2))
(use-package flycheck-popup-tip
:straight (:build t)
:after flycheck
:hook (flycheck-mode . flycheck-popup-tip-mode)
:config
(setq flycheck-popup-tip-error-prefix "X ")
(after! evil
(add-hook 'evil-insert-state-entry-hook
#'flycheck-popup-tip-delete-popup)
(add-hook 'evil-replace-state-entry-hook
#'flycheck-popup-tip-delete-popup)))
(use-package flycheck-posframe
:straight (:build t)
:hook (flycheck-mode . flycheck-posframe-mode)
:config
(setq flycheck-posframe-warning-prefix "! "
flycheck-posframe-info-prefix "··· "
flycheck-posframe-error-prefix "X "))General Programming Languages
EmacsLisp
This package displays the function’s arglist or variable’s docstring in the echo area at the bottom of the frame. Quite useful indeed.
(use-package eldoc
:defer t
:after company
:init
(eldoc-add-command 'company-complete-selection
'company-complete-common
'company-capf
'company-abort))
eldoc-box takes eldoc a step further by displaying said information in
a child frame.
(use-package eldoc-box
:straight (:build t)
:hook (emacs-lisp-mode . eldoc-box-hover-at-point-mode)
:after eldoc)Let’s also declare some Elisp-dedicated keybindings, prefixed by a comma.
(general-define-key
:states 'motion
:keymaps 'emacs-lisp-mode-map
:prefix ","
"'" #'ielm
"c" '(emacs-lisp-byte-compile :which-key "Byte compile")
"e" '(nil :which-key "eval")
"eb" #'eval-buffer
"ed" #'eval-defun
"ee" #'eval-last-sexp
"er" #'eval-region
"h" '(nil :which-key "help")
"hh" #'helpful-at-point)Visual Configuration
Dashboard
(use-package dashboard
:straight (:build t)
:ensure t
:after all-the-icons
:config
(setq dashboard-banner-logo-title "Phundrak’s Vanilla Emacs"
dashboard-startup-banner 'logo
dashboard-center-content t
dashboard-show-shortcuts t
dashboard-set-navigator t
dashboard-set-heading-icons t
dashboard-set-file-icons t
initial-buffer-choice (lambda () (get-buffer "*dashboard*"))
dashboard-projects-switch-function 'counsel-projectile-switch-project-by-name)
(setq dashboard-navigator-buttons
`(((,(all-the-icons-faicon "language" :height 1.1 :v-adjust 0.0)
"Linguistics website"
""
(lambda (&rest _) (browse-url "https://langue.phundrak.com")))
(,(all-the-icons-faicon "firefox" :height 1.1 :v-adjust 0.0)
"Config Website"
""
(lambda (&rest _) (browse-url "https://config.phundrak.com"))))
((,(all-the-icons-octicon "git-branch" :height 1.1 :v-adjust 0.0)
"Dotfiles sources"
""
(lambda (&rest _) (browse-url "https://labs.phundrak.com/phundrak/dotfiles")))
("!" "Issues" "Show issues" (lambda (&rest _)
(browse-url "https://labs.phundrak.com/phundrak/dotfiles/issues"))
warning))
((,(all-the-icons-faicon "level-up" :height 1.1 :v-adjust 0.0)
"Update packages"
""
(lambda (&rest _) (progn
(require 'straight)
(straight-pull-all)))))))
(setq dashboard-items '((recents . 15)
(projects . 10)))
(dashboard-setup-startup-hook)
:init
(add-hook 'after-init-hook 'dashboard-refresh-buffer))Modeline
(use-package doom-modeline
:straight (:build t)
:defer t
:init (doom-modeline-mode 1)
:custom ((doom-modeline-height 15)))Theme
(use-package doom-themes
:straight (:build t)
:defer t
:init (load-theme 'doom-nord t))Icons? Did someone say icons?
YES! ALL OF THEM!
Ahem…
The package all-the-icons allows us to use a wide variety of icons in
Emacs for various purposes, wherever we want, and THAT is GREAT! I’ll
(ab)use this feature in my config, be warned! NOTE: The first time a
configuration with all-the-icons is loaded on a machine, the needed
fonts might not be available, so you’ll need to install them with the
command M-x all-the-icons-install-fonts.
(use-package all-the-icons
:defer t)
prettify-symbols-mode is also a nifty feature of Emacs, and it is
built-in! With that, I can replace strings of my choice by another
character of my choice!
(dolist (symbol '(("lambda" . 955)
("mapc" . 8614)))
(add-to-list 'prettify-symbols-alist symbol))Let’s enable this mode for any programming mode:
(add-hook 'emacs-lisp-mode-hook #'prettify-symbols-mode)Rainbow Delimiters
(use-package rainbow-delimiters
:straight (:build t)
:defer t
:hook (prog-mode . rainbow-delimiters-mode))Y’all want some more COLORS?
It is possible to make info buffers much more colorful (and imo easier to read) with this simple package:
(use-package info-colors
:straight (:build t)
:commands info-colors-fnontify-node
:hook (Info-selection . info-colors-fontify-node)
:hook (Info-mode . mixed-pitch-mode))Misc
avy
avy is a really convenient way of jumping around, but I’ll need some
configuration to make it bépo-compatible.
(use-package avy
:defer t
:straight (:build t)
:config
(setq avy-keys '(?a ?u ?i ?e ?c ?t ?s ?r ?n))
:general
(:states 'normal
"gl" #'avy-goto-line))Calc
Let’s give calc-mode some better defaults.
(setq calc-angle-mode 'rad
calc-symbolic-mode t)Elcord
What’s the point of using Emacs if you can’t tell everyone?
(use-package elcord
:straight (:built t)
:defer t
:config
(setq elcord-use-major-mode-as-main-icon t
elcord-refresh-rate 5
elcord-display-elapsed nil))
ivy-quick-find-files.el
This package is a small utility package I’ve written in order to quickly find files across my filesystem.
(use-package ivy-quick-find-files
:defer t
:straight (ivy-quick-find-files :type git
:host github
:repo "phundrak/ivy-quick-find-files.el"
:build t)
:config
(setq ivy-quick-find-files-program 'fd
ivy-quick-find-files-dirs-and-exts '(("~/org" . "org")
("~/Documents/conlanging" . "org")
("~/Documents/university" . "org"))))Winum
Winum allows Emacs to associate windows with a specific number and navigate through these windows by directly refering to their associated number! This allows for faster window configuration than just going to the frame above, then left, left, and up.
(use-package winum
:straight (:build t)
:init (winum-mode))Keybindings
Undefining some stuff to make keybind prefixes work correctly.
(general-define-key
:keymaps '(backtrace-mode-map diff-minor-mode-map magit-mode-map
rmail-mode-map evil-motion-state-map dired-mode-map
epa-key-list-mode-map special-mode-map splash-screen-keymap
undo-tree-visualizer-mode-map magit-blame-read-only-mode-map
org-agenda-keymap org-agenda-mode-map git-rebase-mode-map
Buffer-menu-mode-map custom-mode-map gfm-view-mode-map
electric-help-map image-mode-map magit-diff-mode-map)
"SPC" nil)
(general-define-key
:keymaps 'evil-motion-state-map
"," nil)
(general-define-key
:keymaps 'evil-insert-state-map
"C-t" nil)
(general-define-key
:keymaps '(diff-mode-map help-mode-map image-mode-map
dired-mode-map Man-mode-map eww-mode-map magit-mode-map
debugger-mode-map dired-mode-map custom-mode-map
eshell-mode-map)
:states 'normal
"SPC" nil)
(general-define-key
:keymaps 'magit-mode-map
:states 'visual
"SPC" nil)
(general-define-key
:keymaps '(diff-mode-map org-agenda-keymap org-agenda-mode-map)
:states 'motion
"SPC" nil)
(general-define-key
:keymaps 'eshell-mode-map
:states 'normal
"c" #'evil-backward-char
"t" #'evil-next-line
"s" #'evil-previous-line
"r" #'evil-forward-char)
(general-define-key
:keymaps 'evil-insert-state-map
"U" nil
"C-a" nil
"C-y" nil
"C-e" nil)
(general-define-key
:states 'normal
"U" #'evil-redo
"C-a" #'beginning-of-line
"C-e" #'end-of-line
"C-y" #'yank) (general-define-key
:states 'normal
:prefix "SPC"
"SPC" '(counsel-M-x :wk "M-x")
"'" #'shell-pop
"a" '(nil :wk "apps")
"ac" #'calc
"ad" #'docker
"ae" #'eww
"at" #'tetris
"aw" #'wttrin
"aC" #'calendar
"as" '(nil :wk "shells")
"ase" #'eshell-new
"asv" #'vterm
"b" '(nil :wk "buffers")
"bb" #'bufler-switch-buffer
"bB" #'bury-buffer
"bl" #'bufler
"bd" #'kill-this-buffer
"bD" #'kill-buffer
"bh" #'dashboard-refresh-buffer
"bm" #'switch-to-messages-buffer
"br" #'counsel-buffer-or-recentf
"bs" #'switch-to-scratch-buffer
"c" '(nil :wk "code")
"cl" #'evilnc-comment-or-uncomment-lines
"e" '(nil :wk "email")
"ec" #'mu4e-compose-new
"em" #'mu4e
"f" '(nil :wk "files")
"fc" '((lambda ()
(interactive)
(find-file (concat (getenv "HOME") "/org/config/emacs.org")))
:wk "Config file")
"ff" #'counsel-find-file
"fF" #'ivy-quick-find-files
"fh" #'hexl-find-file
"fr" #'counsel-recentf
"fs" #'save-buffer
"g" '(nil :wk "git")
"gc" #'magit-clone
"gd" #'magit-dispatch
"gi" #'magit-init
"gs" #'magit-status
"gy" #'my/yadm
"gS" #'magit-stage-file
"gU" #'magit-unstage-file
"gf" '(nil :wk "file")
"gfd" #'magit-diff
"gfc" #'magit-file-checkout
"gfl" #'magit-file-dispatch
"gfF" #'magit-find-file
"h" '(nil :wk "help")
"hk" #'wk-show-top-level
"hd" '(nil :wk "describe")
"hdc" #'describe-char
"hdf" #'helpful-callable
"hdk" #'helpful-key
"hdv" #'helpful-variable
"i" '(nil :wk "insert")
"iy" #'ivy-yasnippet
"j" '(nil :wk "jump")
"jd" #'dired-jump
"p" '(nil :wk "project")
"p!" #'projectile-run-shell-command-in-root
"p&" #'projectile-run-async-shell-command-in-root
"pb" #'counsel-projectile-switch-to-buffer
"pc" #'counsel-projectile
"pd" #'counsel-projectile-find-dir
"pe" #'projectile-edit-dir-locals
"pf" #'counsel-projectile-find-file
"pg" #'projectile-find-tag
"pk" #'project-kill-buffers
"pp" #'counsel-projectile-switch-project
"pt" #'ivy-magit-todos
"pv" #'projectile-vc
"t" '(nil :wk "toggles")
"tt" #'counsel-load-theme
"ti" '(nil :wk "input method")
"tit" #'toggle-input-method
"tis" #'set-input-mode
"u" #'universal-argument
"w" '(nil :wk "windows")
"w-" #'split-window-below-and-focus
"w/" #'split-window-right-and-focus
"w$" #'winum-select-window-by-number
"w0" #'winum-select-window-0-or-10
"w1" #'winum-select-window-1
"w2" #'winum-select-window-2
"w3" #'winum-select-window-3
"w4" #'winum-select-window-4
"w5" #'winum-select-window-5
"w6" #'winum-select-window-6
"w7" #'winum-select-window-7
"w8" #'winum-select-window-8
"w9" #'winum-select-window-9
"wb" '((lambda ()
(interactive)
(progn
(kill-this-buffer)
(delete-window)))
:wk "Kill buffer and window")
"wd" #'delete-window
"wo" #'other-window
"wD" #'delete-other-windows
"ww" '(nil :wk "writeroom")
"www" #'writeroom-mode
"wwb" #'writeroom-buffer-width/body
"wc" #'evil-window-left
"wt" #'evil-window-down
"ws" #'evil-window-up
"wr" #'evil-window-right
"T" '(nil :wk "text")
"Tz" #'hydra-zoom/body
"Tu" #'downcase-region
"TU" #'upcase-region
"Te" #'string-edit-at-point
"q" '(nil :wk "quit")
"qf" #'delete-frame
"qq" #'save-buffers-kill-terminal
"qQ" #'kill-emacs)