261 KiB
Emacs Configuration
- Introduction
- Basic configuration
- Custom Elisp
- Package Management
- Keybinding Management
- Packages Configuration
- Keybindings
Introduction
After a couple of years using Spacemacs and a failed attempt at
switching to DoomEmacs, I’m finally switching back to a vanilla
configuration! Why? Because I got tired of the framework getting in my
way when I wanted to do stuff. I’m sure this is more applicable to
Spacemacs than DoomEmacs since the latter has nice macros written to
easily add new packages and configure them, such as package!, after!,
and others. But ultimately, I wanted to have a system I designed
entirely, with the keybinds I want, the packages I want.
Aso, why Emacs? You know this famous quote:
Emacs is a great operating system, it just lacks a good text editor.
It’s actually pretty true in my opinion. Emacs is basically a Lisp machine with a default text editor, programmed with EmacsLisp, a general-purpose programming language. Therefore, if you want to do something in Emacs, with enough Elisp you can do it — if it’s not in Emacs already, that is.
Basic configuration
Early Init
The early init file is the file loaded before anything else in Emacs. This is where I put some options in order to disable as quickly as possible some built-in features of Emacs before they can be even loaded, speeding Emacs up a bit.
(setq package-enable-at-startup nil
inhibit-startup-message t
frame-resize-pixelwise t ; fine resize
package-native-compile t) ; native compile packages
(scroll-bar-mode -1) ; disable scrollbar
(tool-bar-mode -1) ; disable toolbar
(tooltip-mode -1) ; disable tooltips
(set-fringe-mode 10) ; give some breathing room
(menu-bar-mode -1) ; disable menubar
(blink-cursor-mode 0) ; disable blinking cursorEmacs Behavior
Editing Text in Emacs
I never want to keep trailing spaces in my files, which is why I’m doing this:
(add-hook 'before-save-hook #'whitespace-cleanup)I don’t understand why some people add two spaces behind a full stop, I sure don’t. Let’s tell Emacs.
(setq-default sentence-end-double-space nil)
There is a minor mode in Emacs which allows to have a finer way of
jumping from word to word: global-subword-mode. It detects if what
Emacs usually considers a word can be understood as several words, as
in camelCase words, and allows us to jump words on this finer level.
(global-subword-mode 1)Lastly, I want the default mode for Emacs to be Emacs Lisp.
(setq-default initial-major-mode 'emacs-lisp-mode)Indentation
I don’t like tabs. They rarely look good, and if I need it I can
almost always tell Emacs to use them through a .dir-locals.el file or
through the config file of my code formatter. So by default, let’s
disable them:
(setq-default indent-tabs-mode nil)
(add-hook 'prog-mode-hook (lambda () (setq indent-tabs-mode nil)))Just to go on a little tangent here: I don’t exactly hate tabs, but I find them really annoying when your text editor knows only them. Sure, for indentation they work great, and they allow different people getting different settings in their text editor depending on their preferred tastes —some may prefer 2 spaces tabs, some may prefer 4 spaces tabs, some deranged people prefer 8 spaces tabs, and some monsters prefer 3!
But the thing is, once you indented your code and then you need alignment, tabs don’t work anymore! Or they may on your text editor but not on your coworker’s! (He’s the one using 3 spaces tabs by the way).
So, is the answer to use spaces instead of tabs, and screw peoples’ preferences in terms of tabs width? No, I say the answer is more moderate than that, and it might frighten or anger some of you at first: use both spaces and tabs. Now, before you lynch me on the main avenue in front of everyone, let me tell you absolutely no one should ever be mixing spaces and tabs for indentation, that would be absolutely terrible and would bring the worst of both worlds. What’s the best of both worlds then?
Tabs for indentation
Spaces for alignment
I haven’t found a way to automate that in Emacs yet aside from formatters’ config file, and tabs look bat in EmacsLisp anyway, so I’ll stick with spaces by default and change it where needed.
Programming Modes
First off, my definition of what makes a “programming mode” doesn’t exactly
fit mine, so on top of prog-mode, let’s add a few other modes.
| Modes |
|---|
| prog-mode |
| latex-mode |
(mapconcat (lambda (mode) (format "%s-hook" (car mode)))
modes
" ")Line Number
Since version 26, Emacs has a built-in capacity of displaying line numbers on the left-side of the buffer. This is a fantastic feature that should actually be the default for all programming modes.
(dolist (mode '(<<prog-modes-gen()>>))
(add-hook mode #'display-line-numbers-mode))Folding code
Most programming languages can usually have their code folded, be it
code between curly braces, chunks of comments or code on another level
of indentation (Python, why…?). The minor-mode that enables that is
hs-minor-mode, let’s enable it for all of these programming modes:
(dolist (mode '(<<prog-modes-gen()>>))
(add-hook mode #'hs-minor-mode))Stay Clean, Emacs!
As nice as Emacs is, it isn’t very polite or clean by default: open a
file, and it will create backup files in the same directory. But then,
when you open your directory with your favorite file manager and see
almost all of your files duplicated with a ~ appended to the filename,
it looks really uncomfortable! This is why I prefer to tell Emacs to
keep its backup files to itself in a directory it only will access.
(setq backup-directory-alist `(("." . ,(expand-file-name ".tmp/backups/"
user-emacs-directory))))
It also loves to litter its init.el with custom variables here and
there, but the thing is: I regenerate my init.el each time I tangle
this file! How can I keep Emacs from adding stuff that will be almost
immediately lost? Did someone say custom file?
(setq-default custom-file (expand-file-name ".custom.el" user-emacs-directory))
(when (file-exists-p custom-file) ; Don’t forget to load it, we still need it
(load custom-file))If we delete a file, we want it moved to the trash, not simply deleted.
(setq delete-by-moving-to-trash t)Finally, the scatch buffer always has some message at its beginning, I don’t want it!
(setq-default initial-scratch-message nil)Stay Polite, Emacs!
When asking for our opinion on something, Emacs loves asking us to answer by “yes” or “no”, but in full! That’s very rude! Fortunately, we can fix this.
(defalias 'yes-or-no-p 'y-or-n-p)
This will make Emacs ask us for either hitting the y key for “yes”, or
the n key for “no”. Much more polite!
It is also very impolite to keep a certain version of a file in its buffer when said file has changed on disk. Let’s change this behavior:
(global-auto-revert-mode 1)Much more polite! Note that if the buffer is modified and its changes haven’t been saved, it will not automatically revert the buffer and your unsaved changes won’t be lost. Very polite!
Misc
Let’s raise Emacs undo memory to 10MB, and make Emacs auto-save our files by default.
(setq undo-limit 100000000
auto-save-default t)
I’m also interested in keeping track of how fast Emacs loads on my
computer, as well as for how long I keep it open. The values are
stored in a .csv with three columns:
- The date when Emacs was closed
- Emacs’ init time
- Emacs’ uptime
(defvar my/emacs-log-file-time (expand-file-name "emacs-time.csv" user-emacs-directory))
(defun my/write-emacs-loadtime-and-uptime ()
(with-temp-buffer
(find-file my/emacs-log-file-time)
(goto-char (point-max))
(insert (format "%s,%s,%s\n"
(string-trim (shell-command-to-string "date +%F-%H-%M-%S"))
(emacs-init-time "%f")
(emacs-uptime "%dd %hh %mm %ss")))
(save-buffer)))
(add-to-list 'kill-emacs-hook #'my/write-emacs-loadtime-and-uptime)(setq window-combination-resize t) ; take new window space from all other windowsPersonal Information
Emacs needs to know its master! For various reasons by the way, some
packages rely of these variables to know who it is talking to or
dealing with, such as mu4e which will guess who you are if you haven’t
set it up correctly.
(setq user-full-name "Lucien Cartier-Tilet"
user-real-login-name "Lucien Cartier-Tilet"
user-login-name "phundrak"
user-mail-address "lucien@phundrak.com")Visual Configuration
The first visual setting in this section will activate the visible bell. What it does is I get a visual feedback each time I do something Emacs doesn’t agree with, like tring to go up a line when I’m already at the top of the buffer.
(setq visible-bell t)It is nicer to see a cursor cover the actual space of a character.
(setq x-stretch-cursor t)When text is ellipsed, I want the ellipsis marker to be a single character of three dots. Let’s make it so:
(setq truncate-string-ellipsis "…")Thanks to this fork of Emacs, it is now possible to set some transparency to the background of Emacs only and not to the entire frame.
(add-hook 'server-after-make-frame-hook (lambda ()
(set-frame-parameter (selected-frame)
'alpha-background 0.9)))Modeline Modules
I sometimes use Emacs in fullscreen, meaning my usual taskbar will be hidden. This is why I want the current date and time to be displayed, in an ISO-8601 style, although not exactly ISO-8601 (this is the best time format, fight me).
(setq display-time-format "%Y-%m-%d %H:%M")
(display-time-mode 1) ; display time in modelineSomething my taskbar doesn’t have is a battery indicator. However, I want it enabled only if I am on a laptop or if a battery is available.
(let ((battery-str (battery)))
(unless (or (equal "Battery status not available" battery-str)
(string-match-p (regexp-quote "N/A") battery-str))
(display-battery-mode 1)))This isn’t a modeline module per se, but we have an indicator of the current line in Emacs. And although it is useful, I also often wish to know which column I’m on. This can be activated like so:
(column-number-mode)
The following code is, as will several chunks of code in this config,
borrowed from TEC’s configuration. It hides the encoding information
of the file if the file itself is a regular UTF-8 file with \n line
ending. Be aware the doom-modeline-buffer-encoding variable is usabel
here only because I use the Doom modeline as seen below.
(defun modeline-contitional-buffer-encoding ()
"Hide \"LF UTF-8\" in modeline.
It is expected of files to be encoded with LF UTF-8, so only show
the encoding in the modeline if the encoding is worth notifying
the user."
(setq-local doom-modeline-buffer-encoding
(unless (and (memq (plist-get (coding-system-plist buffer-file-coding-system) :category)
'(coding-category-undecided coding-category-utf-8))
(not (memq (coding-system-eol-type buffer-file-coding-system) '(1 2))))
t)))Now, let’s automate the call to this function in order to apply the modifications to the modeline each time we open a new file.
(add-hook 'after-change-major-mode-hook #'modeline-contitional-buffer-encoding)Fonts
I don’t like the default font I usually have on my machines, I really don’t. I prefer Cascadia Code, as it also somewhat supports the IPA.
(defvar phundrak/default-font-size 90
"Default font size.")
(defvar phundrak/default-font-name "Cascadia Code"
"Default font.")
(add-hook 'server-after-make-frame-hook
(lambda ()
(when (find-font (font-spec :name phundrak/default-font-name))
(set-face-attribute 'default nil
:font phundrak/default-font-name
:height phundrak/default-font-size))))Frame Title
This is straight-up copied from TEC’s configuration. See their comment on the matter.
(setq frame-title-format
'(""
"%b"
(:eval
(let ((project-name (projectile-project-name)))
(unless (string= "-" project-name)
(format (if (buffer-modified-p) " ◉ %s" " ● %s - Emacs") project-name))))))Nice Macros From Doom-Emacs
Doom-Emacs has some really nice macros that can come in really handy,
but since I prefer to rely on my own configuration, I’ll instead just
copy their code here. First we get the after! macro:
(require 'cl-lib)
(defmacro after! (package &rest body)
"Evaluate BODY after PACKAGE have loaded.
PACKAGE is a symbol or list of them. These are package names, not modes,
functions or variables. It can be:
- An unquoted package symbol (the name of a package)
(after! helm BODY...)
- An unquoted list of package symbols (i.e. BODY is evaluated once both magit
and git-gutter have loaded)
(after! (magit git-gutter) BODY...)
- An unquoted, nested list of compound package lists, using any combination of
:or/:any and :and/:all
(after! (:or package-a package-b ...) BODY...)
(after! (:and package-a package-b ...) BODY...)
(after! (:and package-a (:or package-b package-c) ...) BODY...)
Without :or/:any/:and/:all, :and/:all are implied.
This is a wrapper around `eval-after-load' that:
1. Suppresses warnings for disabled packages at compile-time
2. Supports compound package statements (see below)
3. Prevents eager expansion pulling in autoloaded macros all at once"
(declare (indent defun) (debug t))
(if (symbolp package)
(list (if (or (not (bound-and-true-p byte-compile-current-file))
(require package nil 'noerror))
#'progn
#'with-no-warnings)
;; We intentionally avoid `with-eval-after-load' to prevent eager
;; macro expansion from pulling (or failing to pull) in autoloaded
;; macros/packages.
`(eval-after-load ',package ',(macroexp-progn body)))
(let ((p (car package)))
(cond ((not (keywordp p))
`(after! (:and ,@package) ,@body))
((memq p '(:or :any))
(macroexp-progn
(cl-loop for next in (cdr package)
collect `(after! ,next ,@body))))
((memq p '(:and :all))
(dolist (next (cdr package))
(setq body `((after! ,next ,@body))))
(car body))))))Custom Elisp
Dired functions
phundrak/open-marked-files
This function allows the user to open all marked files from a dired buffer as new Emacs buffers.
(defun phundrak/open-marked-files (&optional files)
"Open all marked FILES in dired buffer as new Emacs buffers."
(interactive)
(let* ((file-list (if files
(list files)
(if (equal major-mode "dired-mode")
(dired-get-marked-files)
(list (buffer-file-name))))))
(mapc (lambda (file-path)
(find-file file-path))
(file-list))))
xah/open-in-external-app
(defun xah/open-in-external-app (&optional file)
"Open FILE or dired marked FILE in external app.
The app is chosen from the user’s OS preference."
(interactive)
(let ((file-list (if file
(list file)
(if (equal major-mode "dired-mode")
(dired-get-marked-files)
(list (buffer-file-name)))))
(do-it-p (if (<= (length file-list) 5)
t
(y-or-n-p "Open more than 5 files? "))))
(when do-it-p
(mapc (lambda (file-path)
(let ((process-connection-type nil))
(start-process "" nil "xdg-open" file-path)))
file-list))))
xah/dired-sort
(defun xah/dired-sort ()
"Sort dired dir listing in different ways.
Prompt for a choice."
(interactive)
(let (sort-by arg)
(setq sort-by (completing-read "Sort by:" '("name" "size" "date" "extension")))
(pcase sort-by
("name" (setq arg "-ahl --group-directories-first"))
("date" (setq arg "-ahl -t --group-directories-first"))
("size" (setq arg "-ahl -S --group-directories-first"))
("extension" (setq arg "ahlD -X --group-directories-first"))
(otherwise (error "Dired-sort: unknown option %s" otherwise)))
(dired-sort-other arg)))Switch between buffers
Two default shortcuts I really like from Spacemacs are SPC b m and SPC
b s, which bring the user directly to the *Messages* buffer and the
*scratch* buffer respectively. These functions do exactly this.
(defun switch-to-messages-buffer ()
"Switch to Messages buffer."
(interactive)
(switch-to-buffer (messages-buffer)))
(defun switch-to-scratch-buffer ()
"Switch to Messages buffer."
(interactive)
(switch-to-buffer "*scratch*"))Screenshots
Since Emacs27, it is possible for Emacs to take screenshots of itself
in various formats. I’m mainly interested by the SVG and PNG format,
so I’ll only write functions for these. It isn’t really redundant with
the screenshot.el package used here since these functions take a
screenshot of Emacs as a whole rather than of a code snippet.
First, we have a general function which is a slight modification of
the function shared by Alphapapa in this Reddit comment. It has been
modified so it is possible to pass the function an argument for the
format the screenshot will be taken as, and if type is nil the user
can still chose it.
(defun self-screenshot (&optional type)
"Save a screenshot of type TYPE of the current Emacs frame.
As shown by the function `', type can weild the value `svg',
`png', `pdf'.
This function will output in /tmp a file beginning with \"Emacs\"
and ending with the extension of the requested TYPE."
(interactive)
(let* ((type (if type type
(intern (completing-read "Screenshot Type: "
'(png svg pdf postscript)))))
(extension (pcase type
('png ".png")
('svg ".svg")
('pdf ".pdf")
('postscript ".ps")
(otherwise (error "Cannot export screenshot of type %s" otherwise))))
(filename (make-temp-file "Emacs-" nil extension))
(data (x-export-frames nil type)))
(with-temp-file filename
(insert data))
(kill-new filename)
(message filename)))For convenience’s sake, I’ll also write two functions dedicated to taking a screenshot in the SVG format and the PNG format respectively.
(defun self-screenshot-svg ()
"Save an SVG screenshot of Emacs.
See `self-screenshot'."
(interactive)
(self-screenshot 'svg))
(defun self-screenshot-png ()
"Save a PNG screenshot of Emacs.
See `self-screenshot'."
(interactive)
(self-screenshot 'png))These functions were used to take the screenshots you can see in this document.
Org Functions
Handle new windows
The two functions below allow the user to not only create a new window to the right or below the current window (respectively), but also to focus the new window immediately.
(defun split-window-right-and-focus ()
"Spawn a new window right of the current one and focus it."
(interactive)
(split-window-right)
(windmove-right))
(defun split-window-below-and-focus ()
"Spawn a new window below the current one and focus it."
(interactive)
(split-window-below)
(windmove-down))
(defun kill-buffer-and-delete-window ()
"Kill the current buffer and delete its window."
(interactive)
(progn
(kill-this-buffer)
(delete-window)))
phundrak/toggle-org-src-window-split
(defun phundrak/toggle-org-src-window-split ()
"This function allows the user to toggle the behavior of
`org-edit-src-code'. If the variable `org-src-window-setup' has
the value `split-window-right', then it will be changed to
`split-window-below'. Otherwise, it will be set back to
`split-window-right'"
(interactive)
(if (equal org-src-window-setup 'split-window-right)
(setq org-src-window-setup 'split-window-below)
(setq org-src-window-setup 'split-window-right))
(message "Org-src buffers will now split %s"
(if (equal org-src-window-setup 'split-window-right)
"vertically"
"horizontally")))Package Management
Repositories
By default, only GNU’s repositories are available to the package managers of Emacs. I also want to use Melpa and org-mode’s repository, so let’s add them! Note that the Elpa repository has been renamed to the gnu repository due to the addition of another Elpa repository, nongnu, which will hosts packages that do not conform to the FSF’s copyright assignment. Both the gnu and the nonfree repositories are Elpa repositories now, and they were renamed in order to avoid any confusion between the two of them.
(setq package-archives '(("melpa" . "https://melpa.org/packages/")
("gnu" . "https://elpa.gnu.org/packages/")
("nongnu" . "https://elpa.nongnu.org/nongnu/")))Straight
For my package management, I prefer to use straight (Github). This is
due to its capacity of integrating nicely with use-package, which also
supports general which I use for my keybindings (see below), but also
because with it I can specify where to retrieve packages that are not
on MELPA or ELPA but on Github and other online Git repositories too.
First, let’s bootstrap straight.
(defvar bootstrap-version)
(defvar comp-deferred-compilation-deny-list ()) ; workaround, otherwise straight shits itself
(let ((bootstrap-file
(expand-file-name "straight/repos/straight.el/bootstrap.el" user-emacs-directory))
(bootstrap-version 5))
(unless (file-exists-p bootstrap-file)
(with-current-buffer
(url-retrieve-synchronously
"https://raw.githubusercontent.com/raxod502/straight.el/develop/install.el"
'silent 'inhibit-cookies)
(goto-char (point-max))
(eval-print-last-sexp)))
(load bootstrap-file nil 'nomessage))Now, we can refresh our package list in order to be able to install stuff.
(package-initialize)
(unless package-archive-contents
(package-refresh-contents))
From time to time, I fork some packages either because I’m trying to
implement something new in said package, or because the package is
unmaintained and I want to continue developing it a bit more. Straight
provides a nice feature for using forks of a package with its :fork
option. If set to t, then straight will attempt to retrieve the
package with the same name but with a different username on the same
host. This username is retrieved through the following variable:
(setq straight-host-usernames
'((github . "Phundrak")
(gitlab . "Phundrak")))
The huge advantage of straight is it clones through git the packages
it installs. This means development can be done directly on the
downloaded package. However, Forge (a Magit extension for interacting
with websites such as Github, Gitlab, and such) interacts by default
with the forge described by the origin remote, which isn’t necessarily
the one I want Forge to interact with by default. Therefore, all
default remotes are named straight so it won’t collide with my regular
development flow.
(setq straight-vc-git-default-remote-name "straight")
We finally come to the use-package installation. This is done like so:
(straight-use-package '(use-package :build t))
(setq use-package-always-ensure t)Keybinding Management
Which-key
(use-package which-key
:straight (:build t)
:defer t
:init (which-key-mode)
:diminish which-key-mode
:config
(setq which-key-idle-delay 1))General
General is an awesome package for managing keybindings. Not only is it
oriented towards keychords by default (which I love), but it also
provides some integration with evil so that we can declare keybindings
for certain states only! This is a perfect replacement for define-key,
evil-define-key, and any other function for defining keychords. And it
is also possible to declare a prefix for my keybindings! By default,
all keybinds will be prefixed with SPC and keybinds related to a
specific mode (often major modes) will be prefixed by a comma , (and
by C-SPC and M-m respectively when in insert-mode or emacs-mode). You
can still feel some influence from my Spacemacs years here.
(use-package general
:defer t
:straight (:build t)
:init
(general-auto-unbind-keys)
:config
(general-create-definer phundrak/undefine
:keymaps 'override
:states '(normal emacs))
(general-create-definer phundrak/evil
:states '(normal))
(general-create-definer phundrak/leader-key
:states '(normal insert visual emacs)
:keymaps 'override
:prefix "SPC"
:global-prefix "C-SPC")
(general-create-definer phundrak/major-leader-key
:states '(normal insert visual emacs)
:keymaps 'override
:prefix ","
:global-prefix "M-m"))(mapconcat (lambda (line)
(let* ((key (car line))
(function (cadr line))
(comment (caddr line)))
(format "\"%s%s\" %s"
prefix
key
(if (string= "" comment)
(if (or (string= "" function)
(string= "nil" function))
"nil"
(concat "#'" function))
(format "'(%s :wk %s)"
(if (or (string= "" function)
(string= "nil" function))
":ignore t"
function)
(if (or (string= "none" comment)
(string= "nil" comment))
"t"
(concat "\"" comment "\"")))))))
table
"\n")Evil
(use-package evil
:straight (:build t)
:init
(progn
(setq evil-want-integration t
evil-want-keybinding nil
evil-want-C-u-scroll t
evil-want-C-i-jump nil)
(require 'evil-vars)
(evil-set-undo-system 'undo-tree))
:config
(general-define-key
:keymaps 'evil-motion-state-map
"SPC" nil
"," nil)
(general-define-key
:keymaps 'evil-insert-state-map
"C-t" nil)
(general-define-key
:keymaps 'evil-insert-state-map
"U" nil
"C-a" nil
"C-y" nil
"C-e" nil)
(evil-mode 1)
(setq evil-want-fine-undo t) ; more granular undo with evil
(evil-set-initial-state 'messages-buffer-mode 'normal)
(evil-set-initial-state 'dashboard-mode 'normal)
;; Use visual line motions even outside of visual-line-mode buffers
(evil-global-set-key 'motion "t" 'evil-next-visual-line)
(evil-global-set-key 'motion "s" 'evil-previous-visual-line)
(dolist (key '("c" "C" "t" "T" "s" "S" "r" "R" "h" "H" "j" "J" "k" "K" "l" "L"))
(general-define-key :states 'normal key nil))
(general-define-key
:states 'motion
"h" 'evil-replace
"H" 'evil-replace-state
"j" 'evil-find-char-to
"J" 'evil-find-char-to-backward
"k" 'evil-substitute
"K" 'evil-smart-doc-lookup
"l" 'evil-change
"L" 'evil-change-line
"c" 'evil-backward-char
"C" 'evil-window-top
"t" 'evil-next-line
"T" 'evil-join
"s" 'evil-previous-line
"S" 'evil-lookup
"r" 'evil-forward-char
"R" 'evil-window-bottom))(use-package evil-collection
:after evil
:straight (:build t)
:config
;; bépo conversion
(defun my/bépo-rotate-evil-collection (_mode mode-keymaps &rest _rest)
(evil-collection-translate-key 'normal mode-keymaps
;; bépo ctsr is qwerty hjkl
"c" "h"
"t" "j"
"s" "k"
"r" "l"
;; add back ctsr
"h" "c"
"j" "t"
"k" "s"
"l" "r"))
(add-hook 'evil-collection-setup-hook #'my/bépo-rotate-evil-collection)
(evil-collection-init))(use-package undo-tree
:defer t
:straight (:build t)
:init
(global-undo-tree-mode))Hydra
Hydra is a simple menu creator for keybindings.
(use-package hydra
:straight (:build t)
:defer t)Hydras
The following hydra allows me to quickly zoom in and out in the current buffer.
(defhydra hydra-zoom ()
"
^Zoom^ ^Other
^^^^^^^--------------------------
[_t_/_s_] zoom in/out [_q_] quit
[_0_]^^ reset zoom
"
("t" text-scale-increase "zoom in")
("s" text-scale-decrease "zoom out")
("0" text-scale-adjust "reset")
("q" nil "finished" :exit t))
Similarly, this one is also inspired from Spacemacs and allows the
user to interact with the width of the buffer in writeroom.
(defhydra writeroom-buffer-width ()
"
^Width^ ^Other
^^^^^^^^-----------------------
[_t_] enlarge [_r_/_0_] adjust
[_s_] shrink [_q_]^^ quit
"
("q" nil :exit t)
("t" writeroom-increase-width "enlarge")
("s" writeroom-decrease-width "shrink")
("r" writeroom-adjust-width "adjust")
("0" writeroom-adjust-width "adjust"))
Another similar one is for mu4e-view-mode that allows me to shrink or
grow the mu4e-headers buffer when viewing an email.
(defhydra mu4e-headers-split-adjust-width ()
"
^Zoom^ ^Other
^^^^^^^---------------------------------
[_t_/_s_] shrink/enlarge view [_q_] quit
"
("q" nil :exit t)
("t" mu4e-headers-split-view-shrink "shrink")
("s" mu4e-headers-split-view-grow "enlarge"))Similarly still, this one allows me to manage the size my Emacs windows.
(defhydra windows-adjust-size ()
"
^Zoom^ ^Other
^^^^^^^-----------------------------------------
[_t_/_s_] shrink/enlarge vertically [_q_] quit
[_c_/_r_] shrink/enlarge horizontally
"
("q" nil :exit t)
("c" shrink-window-horizontally)
("t" enlarge-window)
("s" shrink-window)
("r" enlarge-window-horizontally))Packages Configuration
Autocompletion
Code Autocompletion
(use-package company
:straight (:build t)
:defer t
:hook (company-mode . evil-normalize-keymaps)
:init (global-company-mode)
:config
(setq company-minimum-prefix-length 2
company-toolsip-limit 14
company-tooltip-align-annotations t
company-require-match 'never
company-global-modes '(not erc-mode message-mode help-mode gud-mode)
company-frontends
'(company-pseudo-tooltip-frontend ; always show candidates in overlay tooltip
company-echo-metadata-frontend) ; show selected candidate docs in echo area
;; Buffer-local backends will be computed when loading a major
;; mode, so only specify a global default here.
company-backends '(company-capf)
;; These auto-complete the current selection when
;; `company-auto-complete-chars' is typed. This is too
;; magical. We already have the much more explicit RET and
;; TAB.
company-auto-commit nil
company-auto-complete-chars nil
;; Only search the current buffer for `company-dabbrev' (a
;; backend that suggests text you open buffers). This prevents
;; Company from causing lag once you have a lot of buffers
;; open.
company-dabbrev-other-buffers nil
;; Make `company-dabbrev' fully case-sensitive, to improve UX
;; with domai-specific words with particular casing.
company-dabbrev-ignore-case nil
company-dabbrev-downcase nil))(use-package company-dict
:after company
:straight (:build t)
:config
(setq company-dict-dir (expand-file-name "dicts" user-emacs-directory)))(use-package company-box
:straight (:build t)
:after (company all-the-icons)
:config
(setq company-box-show-single-candidate t
company-box-backends-colors nil
company-box-max-candidates 50
company-box-icons-alist 'company-box-icons-all-the-icons
company-box-icons-all-the-icons
(let ((all-the-icons-scale-factor 0.8))
`((Unknown . ,(all-the-icons-material "find_in_page" :face 'all-the-icons-purple))
(Text . ,(all-the-icons-material "text_fields" :face 'all-the-icons-green))
(Method . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Function . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Constructor . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Field . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(Variable . ,(all-the-icons-material "adjust" :face 'all-the-icons-blue))
(Class . ,(all-the-icons-material "class" :face 'all-the-icons-red))
(Interface . ,(all-the-icons-material "settings_input_component" :face 'all-the-icons-red))
(Module . ,(all-the-icons-material "view_module" :face 'all-the-icons-red))
(Property . ,(all-the-icons-material "settings" :face 'all-the-icons-red))
(Unit . ,(all-the-icons-material "straighten" :face 'all-the-icons-red))
(Value . ,(all-the-icons-material "filter_1" :face 'all-the-icons-red))
(Enum . ,(all-the-icons-material "plus_one" :face 'all-the-icons-red))
(Keyword . ,(all-the-icons-material "filter_center_focus" :face 'all-the-icons-red))
(Snippet . ,(all-the-icons-material "short_text" :face 'all-the-icons-red))
(Color . ,(all-the-icons-material "color_lens" :face 'all-the-icons-red))
(File . ,(all-the-icons-material "insert_drive_file" :face 'all-the-icons-red))
(Reference . ,(all-the-icons-material "collections_bookmark" :face 'all-the-icons-red))
(Folder . ,(all-the-icons-material "folder" :face 'all-the-icons-red))
(EnumMember . ,(all-the-icons-material "people" :face 'all-the-icons-red))
(Constant . ,(all-the-icons-material "pause_circle_filled" :face 'all-the-icons-red))
(Struct . ,(all-the-icons-material "streetview" :face 'all-the-icons-red))
(Event . ,(all-the-icons-material "event" :face 'all-the-icons-red))
(Operator . ,(all-the-icons-material "control_point" :face 'all-the-icons-red))
(TypeParameter . ,(all-the-icons-material "class" :face 'all-the-icons-red))
(Template . ,(all-the-icons-material "short_text" :face 'all-the-icons-green))
(ElispFunction . ,(all-the-icons-material "functions" :face 'all-the-icons-red))
(ElispVariable . ,(all-the-icons-material "check_circle" :face 'all-the-icons-blue))
(ElispFeature . ,(all-the-icons-material "stars" :face 'all-the-icons-orange))
(ElispFace . ,(all-the-icons-material "format_paint" :face 'all-the-icons-pink))))))Ivy
My main menu package is ivy which I use as much as possible –I’ve
noticed helm can be slow, very slow in comparison to ivy so I’ll use
the latter as much as possible. Actually, only ivy is installed for
now. I could have used ido too, but I find it to be a bit too
restricted in terms of features compared to ivy.
(use-package ivy
:straight (:build t)
:defer t
:diminish
:bind (("C-s" . swiper)
:map ivy-minibuffer-map
("TAB" . ivy-alt-done)
("C-l" . ivy-alt-done)
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
("C-u" . ivy-scroll-up-command)
("C-d" . ivy-scroll-down-command)
:map ivy-switch-buffer-map
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
("C-l" . ivy-done)
("C-d" . ivy-switch-buffer-kill)
:map ivy-reverse-i-search-map
("C-t" . ivy-next-line)
("C-s" . ivy-previous-line)
("C-d" . ivy-reverse-i-search-kill))
:config
(ivy-mode 1)
(setq ivy-wrap t
ivy-height 17
ivy-sort-max-size 50000
ivy-fixed-height-minibuffer t
ivy-read-action-functions #'ivy-hydra-read-action
ivy-read-action-format-function #'ivy-read-action-format-columns
projectile-completion-system 'ivy
ivy-on-del-error-function #'ignore
ivy-use-selectable-prompt t))
There is also prescient.el that offers some nice features when
coupled with ivy, guess what was born out of it? ivy-prescient, of
course!
(use-package ivy-prescient
:after ivy
:straight (:build t))
I warned you I’d use too much all-the-icons, I did!
(use-package all-the-icons-ivy
:straight (:build t)
:after (ivy all-the-icons)
:hook (after-init . all-the-icons-ivy-setup))A buffer popping at the bottom of the screen is nice and all, but have you considered a floating buffer in the center of your frame?
(use-package ivy-posframe
:defer t
:after (:any ivy helpful)
:hook (ivy-mode . ivy-posframe-mode)
:straight (:build t)
:init
(ivy-posframe-mode 1)
:config
(setq ivy-fixed-height-minibuffer nil
ivy-posframe-border-width 10
ivy-posframe-parameters
`((min-width . 90)
(min-height . ,ivy-height))))
Finally, let’s make ivy richer:
(use-package ivy-rich
:straight (:build t)
:after ivy
:init
(ivy-rich-mode 1))Counsel
(use-package counsel
:straight (:build t)
:after recentf
:defer t
:after ivy
:bind (("M-x" . counsel-M-x)
("C-x b" . counsel-ibuffer)
("C-x C-f" . counsel-find-file)
:map minibuffer-local-map
("C-r" . 'counsel-minibuffer-history)))Yasnippet
(use-package yasnippet
:defer t
:straight (:build t)
:init
(yas-global-mode)
:hook ((prog-mode . yas-minor-mode)
(text-mode . yas-minor-mode)))(use-package yasnippet-snippets
:defer t
:after yasnippet
:straight (:build t))(use-package yatemplate
:defer t
:after yasnippet
:straight (:build t))(use-package ivy-yasnippet
:defer t
:after (ivy yasnippet)
:straight (:build t))
(phundrak/leader-key)
:infix "i"
:packages 'ivy-yasnippet
"y" #'ivy-yasnippetApplications
Docker
Docker is an awesome tool for reproducible development environments. Due to this, I absolutely need a mode for editing Dockerfiles.
(use-package dockerfile-mode
:defer t
:straight (:build t)
:hook (dockerfile-mode . lsp-deferred)
:init
(put 'docker-image-name 'safe-local-variable #'stringp)
:mode "Dockerfile\\'")
The docker package also provides interactivity with Docker and
docker-compose from Emacs.
(use-package docker
:defer t
:straight (:build t))Elfeed
Elfeed is a nice Atom and RSS reader for Emacs. The only thing I want to change for now is the default search filter: I want to see not only unread news but read news as well, a bit like my emails; and where the database is to be stored.
(use-package elfeed
:defer t
:straight (:build t)
:custom
((elfeed-search-filter "@6-months-ago")
(elfeed-db-directory (expand-file-name ".elfeed-db"
user-emacs-directory))))Elfeed-goodies is a package which enhances the Elfeed experience. Aside from running its setup command as soon as possible, I also set in this code block all my keybinds for Elfeed here.
(use-package elfeed-goodies
:defer t
:after elfeed
:commands elfeed-goodies/setup
:straight (:build t)
:init
(elfeed-goodies/setup)
:general
(phundrak/undefine
:keymaps '(elfeed-show-mode-map elfeed-search-mode-map)
:packages 'elfeed
"DEL" nil
"s" nil)
(phundrak/evil
:keymaps 'elfeed-show-mode-map
:packages 'elfeed
<<general-keybindings-gen(table=elfeed-keybinds-show-mode)>>)
(phundrak/evil
:keymaps 'elfeed-search-mode-map
:packages 'elfeed
<<general-keybindings-gen(table=elfeed-keybinds-search-mode)>>)
(phundrak/major-leader-key
:keymaps 'elfeed-search-mode-map
:packages 'elfeed
<<general-keybindings-gen(table=elfeed-keybinds-search-mode-prefixed)>>))
Last but not least, my Elfeed configuration is stored in an org file
thanks to elfeed-org.
(use-package elfeed-org
:defer t
:after elfeed
:straight (:build t)
:init
(elfeed-org)
:config
(setq rmh-elfeed-org-files '("~/org/elfeed.org")))Keybinds
First, here are the keybinds for Elfeed’s elfeed-show-mode. They
aren’t prefixed by SPC like most of my keybinds, a direct keypress
will directly launch the function.
| Key | Function | Comment |
|---|---|---|
| + | elfeed-show-tag | |
| - | elfeed-show-untag | |
| « | elfeed-show-prev | |
| » | elfeed-show-next | |
| b | elfeed-show-visit | |
| C | elfeed-kill-link-url-at-point | |
| d | elfeed-show-save-enclosure | |
| l | elfeed-show-next-link | |
| o | elfeed-goodies/show-ace-link | |
| q | elfeed-kill-buffer | |
| S | elfeed-show-new-live-search | |
| u | elfeed-show-tag–unread | |
| y | elfeed-show-yank |
Same thing, different mode, here are my keybinds for
elfeed-search-mode.
| Key | Function | Comment |
|---|---|---|
| « | elfeed-search-first-entry | |
| » | elfeed-search-last-entry | |
| b | elfeed-search-browse-url | |
| f | filter | |
| fc | elfeed-search-clear-filter | |
| fl | elfeed-search-live-filter | |
| fs | elfeed-search-set-filter | |
| u | update | |
| us | elfeed-search-fetch | |
| uS | elfeed-search-update | |
| uu | elfeed-update | |
| uU | elfeed-search-update–force | |
| y | elfeed-search-yank |
I have some additional keybinds for elfeed-search-mode, but these one
are prefixed with , (and M-m).
| Key | Function | Comment |
|---|---|---|
| c | elfeed-db-compact | |
| t | tag | |
| tt | elfeed-search-tag-all-unread | |
| tu | elfeed-search-untag-all-unread | |
| tT | elfeed-search-tag-all | |
| tU | elfeed-search-untag-all |
Basic configuration
As seen below, I use org-msg to compose my emails, which includes by
default my signature. Therefore, there is no need for Emacs itself to
know about it since I don’t want it to include it a second time after
org-msg already did.
(setq message-signature nil
mail-signature nil)Mu4e
Mu4e is a very eye-pleasing email client for Emacs, built around mu
and which works well with mbsync (found in Arch’s isync package). For
me, the main advantage of mu4e is it has a modern interface for
emailing, and quite straightforward. I tried a couple of other email
clients for Emacs, and I even was for some time a Gnus user, but in
the end, mu4e really works best for me. Below you’ll find my
configuration for the mu4e package itself.
(use-package mu4e
:after all-the-icons
:straight (:build t :location site)
:commands mu4e mu4e-compose-new
:init
(setq mu4e-completing-read-function 'completing-read
mu4e-use-fancy-chars t
mu4e-view-show-images t
message-kill-buffer-on-exit t
mu4e-org-support nil)
(let ((dir "~/Downloads/mu4e"))
(when (file-directory-p dir)
(setq mu4e-attachment-dir dir)))
(defmacro mu4e-view-mode--prepare ()
`(lambda () (visual-line-mode 1)))
:gfhook ('mu4e-view-mode-hook (mu4e-view-mode--prepare))
:config
(add-hook 'mu4e-view-mode-hook (lambda () (setq truncate-lines nil)))
(add-hook 'mu4e-headers-mode-hook (lambda () (setq truncate-lines t)))
<<mu4e-keybindings-undef>>
<<mu4e-keybindings-view>>
<<mu4e-keybindings-view-no-prefix>>
<<mu4e-keybindings-header>>
<<mu4e-keybindings-header-no-leader>>
<<mu4e-keybindings-message>>
<<mu4e-mail-service>>
<<mu4e-mail-on-machine>>
<<mu4e-no-signature>>
<<mu4e-bookmarks>>
(when (fboundp 'imagemagick-register-types)
(imagemagick-register-types))
(add-to-list 'mu4e-view-actions '("PDF view" . mu4e-action-open-as-pdf) t)
(require 'gnus-dired)
(setq gnus-dired-mail-mode 'mu4e-user-agent)
(add-hook 'mu4e-compose-mode-hook (lambda () (use-hard-newlines t 'guess)))
(add-hook 'mu4e-compose-mode-hook 'mml-secure-message-sign-pgpmime)
(setq mu4e-change-filenames-when-moving t
mu4e-update-interval 60
mu4e-compose-format-flowed t
mu4e-view-show-addresses t
mu4e-sent-messages-behaviour 'sent
mu4e-hide-index-messages t
mu4e-view-show-images t ; try to show images
mu4e-view-image-max-width 600
message-send-mail-function #'smtpmail-send-it ; how to send an email
smtpmail-stream-type 'starttls
message-kill-buffer-on-exit t ; close after sending
mu4e-context-policy 'pick-first ; start with first (default) context
mu4e-compose-context-policy 'ask-if-none ; compose with current context, or ask
mu4e-completing-read-function #'ivy-completing-read ; use ivy
mu4e-confirm-quit t ; no need to ask
mu4e-header-fields '((:account . 12)
(:human-date . 12)
(:flags . 4)
(:from . 25)
(:subject)))
;; set mail user agent
(setq mail-user-agent 'mu4e-user-agent)
<<mu4e-fancy-marks>>
<<mu4e-vertical-split>>
<<mu4e-headers-mode>>
(defun mu4e-action-open-as-pdf (msg)
"Export and open MSG as pdf."
(let* ((date (mu4e-message-field msg :date))
(infile (mu4e~write-body-to-html msg))
(outfile (format-time-string "/tmp/%Y-%m-%d-%H-%M-%S.pdf" date)))
(with-temp-buffer
(shell-command
(format "wkhtmltopdf %s %s" infile outfile) t))
(find-file outfile))))
Quick sidenote: on ArchLinux, you’ll need to install either mu or
mu-git from the AUR in order to use mu4e. I also have a .desktop file
so I can open mu4e directly from my program picker. It uses the shell
script emacsmail I’ve written here.
[Desktop Entry]
Name=Mu4e
GenericName=Mu4e
Comment=Maildir Utils for Emacs
MimeType=x-scheme-handler/mailto;
Exec=/home/phundrak/.local/bin/emacsmail %U
Icon=emacs
Type=Application
Terminal=false
Categories=Network;Email;TextEditor
StartupWMClass=Gnus
Keywords=Text;Editor;Basic configuration
First, let’s inform Emacs how it can send emails, using which service and how. In my case, I use my own mail server.
(setq smtpmail-smtp-server "mail.phundrak.com"
smtpmail-smtp-service 587
smtpmail-stream-type 'starttls
message-send-mail-function 'smtpmail-send-it)We also need to inform it on where my emails are stored on my machine, and how to retrieve them.
(setq mu4e-get-mail-command "mbsync -a"
mu4e-root-maildir "~/Mail"
mu4e-trash-folder "/Trash"
mu4e-refile-folder "/Archive"
mu4e-sent-folder "/Sent"
mu4e-drafts-folder "/Drafts")
In the same vein of this bit of configuration, I do not want mu4e to
insert my mail signature, org-msg already does that.
(setq mu4e-compose-signature nil)Bookmarks
In mu4e, the main focus isn’t really mail directories such as your inbox, your sent messages and such, but instead you manipulate bookmarks which will show you emails depending on tags. This mean you can create some pretty customized bookmarks that go way beyound your simple inbox, outbox and all. Actually, four of my bookmarks have a couple of filtering:
- anything in my inbox linked to my university
- the emacs-doctor mailing list (French Emacs mailing list)
- the conlang mailing lists
- and my inbox for any mail not caught by any of these filters
And all of them will have the requirement not to display any trashed email. Actually, all of my bookmarks will have this requirement, except for the bookmark dedicated to them as well as my sent emails. I’ll add these latter requirements later.
Here are the requirements for my university bookmark. The regex
matches any email address which contains either up8.edu or
univ-paris8, which can be found in email addresses from the University
Paris 8 (my university).
(mapconcat (lambda (list)
(let ((address (string-replace (regexp-quote "~") "" (car list))))
(mapconcat (lambda (flag)
(concat flag ":" address))
'("list" "t" "f")
" OR ")))
lists
" OR ")(let ((regex "/.*up8\\.edu|.*univ-paris8.*/"))
<<mu4e-bookmarks-from-copy-to-gen>>)f:/.*up8\.edu|.*univ-paris8.*/ OR c:/.*up8\.edu|.*univ-paris8.*/ OR t:/.*up8\.edu|.*univ-paris8.*/
Next I need an inbox dedicated to the association I’m part of.
(let ((regex "/.*supran\\.fr/"))
<<mu4e-bookmarks-from-copy-to-gen>>)f:/.*supran\.fr/ OR c:/.*supran\.fr/ OR t:/.*supran\.fr/
As for the Emacs-doctor list, I need to match both the current, modern
mailing list address but also its old address. The same applies for
the emacs-devel mailing list as well as Github emails related to my
package eshell-info-banner.el (see here). Here are the addresses to
match:
/ateliers.*emacs.*//emacs-.*@gnu.org//.*eshell-info-banner.*/
"<<mu4e-bookmarks-mailing-lists(lists=mu4e-emacs-mailing-lists)>>"list:/ateliers.*emacs.*/ OR t:/ateliers.*emacs.*/ OR f:/ateliers.*emacs.*/ OR list:/emacs-.*@gnu.org/ OR t:/emacs-.*@gnu.org/ OR f:/emacs-.*@gnu.org/ OR list:/.*eshell-info-banner.*/ OR t:/.*eshell-info-banner.*/ OR f:/.*eshell-info-banner.*/
Another bookmark I wish to have is one dedicated to emails related to issues and PRs from Github.
/.*\\.github\\.com/
"<<mu4e-bookmarks-mailing-lists(lists=mu4e-github-mailing-lists)>>"list:/.*\.github\.com/ OR t:/.*\.github\.com/ OR f:/.*\.github\.com/
When it comes to the conlang mailing list, let’s not match anything from or to them. I’ll also include the auxlang mailing list –I’m not subscribed anymore, but it’ll keep my inbox clean.
/.*LANG@LISTSERV.BROWN.EDU/
"<<mu4e-bookmarks-mailing-lists(lists=mu4e-conlanging-mailing-lists)>>"list:/.*LANG@LISTSERV.BROWN.EDU/ OR t:/.*LANG@LISTSERV.BROWN.EDU/ OR f:/.*LANG@LISTSERV.BROWN.EDU/
As I said earlier, something that will often come back in my bookmarks is the emails must not be trashed to appear. I want also to display junk emails, so I end up with the following rule:
(mapconcat #'identity
`("NOT flag:trashed"
,(format "(%s)" (mapconcat (lambda (maildir) (concat "maildir:" maildir))
'("/Inbox" "/Junk")
" OR ")))
" AND ")NOT flag:trashed AND (maildir:/Inbox OR maildir:/Junk)
And for the last string-generating code, let’s describe my main inbox:
(mapconcat #'identity
(cons "<<mu4e-bookmarks-default-filter()>>"
`(,(format "(%s)"
<<mu4e-bookmarks-filter-conlang-list>>)
,(format "(%s)" "<<mu4e-bookmarks-filter-asso()>>")
,(format "(%s)"
<<mu4e-bookmarks-filter-emacs-list>>)
,(format "(%s)"
<<mu4e-bookmarks-filter-github-list>>)
,(format "(%s)"
<<mu4e-bookmarks-filter-uni>>)))
" AND NOT ")NOT flag:trashed AND (maildir:/Inbox OR maildir:/Junk) AND NOT (list:/.*LANG@LISTSERV.BROWN.EDU/ OR t:/.*LANG@LISTSERV.BROWN.EDU/ OR f:/.*LANG@LISTSERV.BROWN.EDU/) AND NOT (f:/.*supran.fr/ OR c:/.*supran.fr/ OR t:/.*supran.fr/) AND NOT (list:/ateliers.*emacs.*/ OR t:/ateliers.*emacs.*/ OR f:/ateliers.*emacs.*/ OR list:/emacs-.*@gnu.org/ OR t:/emacs-.*@gnu.org/ OR f:/emacs-.*@gnu.org/ OR list:/.*eshell-info-banner.*/ OR t:/.*eshell-info-banner.*/ OR f:/.*eshell-info-banner.*/) AND NOT (list:/.*\.github\.com/ OR t:/.*\.github\.com/ OR f:/.*\.github\.com/) AND NOT (f:/.*up8\.edu|.*univ-paris8.*/ OR c:/.*up8\.edu|.*univ-paris8.*/ OR t:/.*up8\.edu|.*univ-paris8.*/)
We can finally define our bookmarks! The code reads as follows:
(setq mu4e-bookmarks
`((:name "Inbox"
:key ?i
:query ,(format "%s"
<<mu4e-bookmarks-inbox-filters>>))
(:name "University"
:key ?u
:query ,(format "%s AND %s"
"<<mu4e-bookmarks-default-filter()>>"
"<<mu4e-bookmarks-filter-uni()>>"))
(:name "Supran"
:key ?S
:query ,(format "%s AND %s"
"<<mu4e-bookmarks-default-filter()>>"
"<<mu4e-bookmarks-filter-asso()>>"))
(:name "Emacs"
:key ?e
:query ,(format "%s AND %s"
"<<mu4e-bookmarks-default-filter()>>"
<<mu4e-bookmarks-filter-emacs-list>>))
(:name "Github"
:key ?g
:query ,(format "%s AND (%s)"
"<<mu4e-bookmarks-default-filter()>>"
"<<mu4e-bookmarks-filter-github-list()>>"))
(:name "Linguistics"
:key ?l
:query ,(format "(%s) AND (%s)"
"<<mu4e-bookmarks-default-filter()>>"
<<mu4e-bookmarks-filter-conlang-list>>))
(:name "Sent" :key ?s :query "maildir:/Sent")
(:name "All Unread" :key ?U :query "flag:unread AND NOT flag:trashed")
(:name "Today" :key ?t :query "date:today..now AND NOT flag:trashed")
(:name "This Week" :key ?w :query "date:7d..now AND NOT flag:trashed")
(:name "This Month" :key ?m :query "date:1m..now AND NOT flag:trashed")
(:name "This Year" :key ?y :query "date:1y..now AND NOT flag:trashed")))Dealing with spammers
I’m sure you have received at least one email recently from a sketchy email address asking you something that might be completely unrelated to what you do, or at least somewhat related. Fortunately, we have a hero! Now, let me write a function that will insert their pre-written text at point so I don’t have to go back to their Twitter thread each time I want to shut spammers up.
(defun reply-to-bill ()
(interactive)
(insert "Please forward this email to bill@noprocurement.com,
and delete my email, as I’ll be changing jobs soon, and this
email address will no longer be active.
Bill Whiskoney is a senior partner at Nordic Procurement
Services, and he handles our budget and will help you further or
introduce you to someone who can."))If you want the full story, make sure to read the whole thread, I guarantee it, it’s worth your time! And in case the Twitter thread disappear in the future, here is a backup.
Getting Fancy
I’m not a huge fan of mu4e’s default icons marking my emails, so I’ll
redefine them as follows. Be aware the name of these icons are from
faicon in the package all-the-icons.
| Mark | Flag | Icon |
|---|---|---|
| draft | D | pencil |
| flagged | F | flag |
| new | N | rss |
| passed | P | check |
| replied | R | reply |
| seen | S | eye |
| unread | u | eye-slash |
| trashed | T | trash |
| attach | a | paperclip |
| encrypted | x | lock |
| signed | s | certificate |
(mapconcat (lambda (line)
(let ((mark (car line))
(flag (cadr line))
(icon (caddr line)))
(format "mu4e-headers-%s-mark `(\"%s\" . ,(all-the-icons-faicon \"%s\" :height 0.8))"
mark
flag
icon)))
table
"\n")mu4e-headers-draft-mark `("D" . ,(all-the-icons-faicon "pencil" :height 0.8))
mu4e-headers-flagged-mark `("F" . ,(all-the-icons-faicon "flag" :height 0.8))
mu4e-headers-new-mark `("N" . ,(all-the-icons-faicon "rss" :height 0.8))
mu4e-headers-passed-mark `("P" . ,(all-the-icons-faicon "check" :height 0.8))
mu4e-headers-replied-mark `("R" . ,(all-the-icons-faicon "reply" :height 0.8))
mu4e-headers-seen-mark `("S" . ,(all-the-icons-faicon "eye" :height 0.8))
mu4e-headers-unread-mark `("u" . ,(all-the-icons-faicon "eye-slash" :height 0.8))
mu4e-headers-trashed-mark `("T" . ,(all-the-icons-faicon "trash" :height 0.8))
mu4e-headers-attach-mark `("a" . ,(all-the-icons-faicon "paperclip" :height 0.8))
mu4e-headers-encrypted-mark `("x" . ,(all-the-icons-faicon "lock" :height 0.8))
mu4e-headers-signed-mark `("s" . ,(all-the-icons-faicon "certificate" :height 0.8))
Let’s enable them and set them:
(setq mu4e-use-fancy-chars t
<<mu4e-fancy-marks-gen()>>)(defun my/set-mu4e-headers-width ()
(let ((width (window-body-width))
(threshold (+ 120 80)))
(setq mu4e-split-view (if (> width threshold)
'vertical
'horizontal))
(message "Window width: %d\tthreshold: %d\nSplit: %S"
width
threshold
mu4e-split-view)))
(setq mu4e-headers-visible-columns 120
mu4e-headers-visible-lines 15)
(add-hook 'mu4e-headers-mode-hook #'my/set-mu4e-headers-width)Headers mode
(add-hook 'mu4e-headers-mode-hook (lambda () (visual-line-mode -1)))
(add-hook 'mu4e-headers-mode-hook (lambda () (toggle-truncate-lines -1)))Keybindings
By default, Evil has some pretty annoying keybindings for users of the
bépo layout: hjkl becomes ctsr for us. Let’s undefine some of these:
(phundrak/undefine
:keymaps 'mu4e-view-mode-map
:packages 'mu4e
"S" nil
"r" nil
"c" nil
"gu" nil)
(phundrak/undefine
:keymaps '(mu4e-view-mode-map mu4e-headers-mode-map)
:packages 'mu4e
"s" nil)
Now, let’s define some keybindings for mu4e’s view mode, that is when
we are viewing an email. All these keybindings will reside between the
major-mode specific leader key , and most of these keybindings can be
described with a simple function:
| Keybinding | Function | Description |
|---|---|---|
| & | mu4e-view-pipe | |
| . | mu4e-headers-split-adjust-width/body | mu4e-headers width |
| a | nil | attachments |
| a& | mu4e-view-pipe-attachment | |
| aa | mu4e-view-attachment-action | |
| ao | mu4e-view-open-attachment | |
| aO | mu4e-view-open-attachment-with | |
| c | nil | compose |
| cc | mu4e-compose-new | |
| ce | mu4e-compose-edit | |
| cf | mu4e-compose-forward | |
| cr | mu4e-compose-reply | |
| cR | mu4e-compose-resend | |
| l | mu4e-show-log | |
| m | nil | mark |
| md | mu4e-view-mark-for-trash | |
| mD | mu4e-view-mark-for-delete | |
| mm | mu4e-view-mark-for-move | |
| mr | mu4e-view-mark-for-refile | |
| mR | mu4e-view-mark-for-read | |
| mu | mu4e-view-mark-for-unread | |
| mU | mu4e-view-mark-for-unmark | |
| t | mu4e-view-mark-thread | mark thread |
| T | nil | toggle |
| Tc | mu4e-view-toggle-hide-cited | |
| Th | mu4e-view-toggle-html | |
| n | mu4e-view-headers-next | |
| N | mu4e-view-headers-next-unread | |
| p | mu4e-view-headers-prev | |
| P | mu4e-view-headers-prev-unread | |
| u | nil | url |
| uf | mu4e-view-go-to-url | |
| uF | mu4e-view-fetch-url |
(phundrak/major-leader-key
:keymaps 'mu4e-view-mode-map
:packages 'mu4e
<<general-keybindings-gen(table=mu4e-keybindings-view-tbl)>>)Two other keybinds are added without a prefix, just for the sake of convenience.
(phundrak/evil
:keymaps 'mu4e-view-mode-map
:packages 'mu4e
"«" #'mu4e-view-headers-prev
"»" #'mu4e-view-headers-next)I’ll also declare two keybinds for mu4e’s headers mode.
(phundrak/major-leader-key
:keymaps 'mu4e-headers-mode-map
:packages 'mu4e
"t" '(mu4e-view-mark-thread :which-key "mark thread")
"s" 'swiper)
I will also redefine without a leader key ctsr in order to be able to
move freely (remember, bépo layout for me).
| Key | Function | Comment |
|---|---|---|
| c | evil-backward-char | |
| t | evil-next-line | |
| s | evil-previous-line | |
| r | evil-forward-char |
(phundrak/evil
:keymaps 'mu4e-headers-mode-map
:packages 'mu4e
<<general-keybindings-gen(table=mu4e-keybindings-header-no-leader-table)>>)Finally, let’s declare a couple of keybindings for when we are composing a message. This time, all my keybindings are prefixed with the major-mode leader and call a simple function.
| Key | Function | Description |
|---|---|---|
| , | message-send-and-exit | |
| c | message-send-and-exit | |
| a | message-kill-buffer | |
| k | message-kill-buffer | |
| s | message-dont-send | |
| f | mml-attach-file |
(phundrak/major-leader-key
:keymaps 'message-mode-map
:packages 'mu4e
<<general-keybindings-gen(table=mu4e-keybindings-message-tbl)>>)Composing messages
Org mime is cool and all, you can write some org-mode and then export it so you can send an HTML email. BUT, have you considered skipping the export part and write your emails directly in org-mode?
(use-package org-msg
:after (org mu4e)
:straight (:build t)
:hook ((mu4e-compose-pre . org-msg-mode))
:custom-face
(mu4e-replied-face ((t (:weight normal :foreground "#b48ead"))))
:config
(defun my/org-msg-signature-convert (orig-fun &rest args)
"Tweak my signature when replying as plain/text only."
(let ((res (apply orig-fun args)))
(when (equal (cadr args) '(text))
(setf (alist-get 'signature res)
(replace-regexp-in-string "\n+" "\n" org-msg-signature)))
res))
(advice-add 'org-msg-composition-parameters
:around 'my/org-msg-signature-convert)
(add-hook 'mu4e-headers-mode (lambda () (toggle-truncate-lines -1)))
(setq org-msg-startup "inlineimages"
org-msg-default-alternatives '((new . (text html))
(reply-to-html . (text html))
(reply-to-text . (text)))
org-msg-convert-citation t
org-msg-greeting-name-limit 3
org-msg-signature (format "\n--\n#+begin_signature\n%s\n#+end_signature"
(string-trim
(replace-regexp-in-string
(regexp-quote "\n")
"\n\n"
(with-temp-buffer
(insert-file-contents mail-signature-file)
(buffer-string))))))
:general
(phundrak/major-leader-key
:keymaps 'org-msg-edit-mode-map
:packages 'org-msg
<<general-keybindings-gen(table=org-msg-edit-mode-keybinds)>>))
The keybinds are relatively simple org-msg-edit-mode:
| Key | Function | Description |
|---|---|---|
| , | message-send-and-exit | |
| c | message-send-and-exit | |
| a | message-kill-buffer | |
| k | message-kill-buffer | |
| s | message-dont-send | |
| f | org-msg-attach |
Email alerts
There is also a package for mu4e which generates desktop notifications when new emails are received. By default, I want to be notified by all messages in my inbox and junk folder. Also, I’ll use Emacs’ default notification system, and I’ll activate the modeline notification.
(use-package mu4e-alert
:straight (:build t)
:after mu4e
:defer t
:init
(add-hook 'after-init-hook #'mu4e-alert-enable-notifications)
(add-hook 'after-init-hook #'mu4e-alert-enable-mode-line-display)
(mu4e-alert-set-default-style 'notifications)
:config
(setq mu4e-alert-interesting-mail-query "flag:unread"))EMMS and Media
EMMS, also known as the Emacs MultiMedia System, allows the user to interact through Emacs with multimedia elements such as music and videos. My main use for it will be for music with MPD (see its configuration here).
(use-package emms
:defer t
:after all-the-icons
:straight (:build t)
:init
(require 'emms-setup)
(require 'emms-mark)
(emms-all)
(add-to-list 'emms-info-functions 'emms-info-mpd)
(add-to-list 'emms-player-list 'emms-player-mpd)
(emms-player-mpd-sync-from-mpd)
(emms-player-mpd-connect)
<<emms-fd-name>>
<<emms-fd-function>>
<<emms-search-set-variable>>
<<emms-media-hydra>>
(defun emms-player-toggle-pause ()
(interactive)
(shell-command-and-echo "mpc toggle"))
:custom
((emms-source-file-default-directory (expand-file-name "~/Music"))
(emms-player-mpd-server-name "localhost")
(emms-player-mpd-server-port "6600")
(emms-player-mpd-music-directory (expand-file-name "~/Music"))
(emms-browser-thumbnail-small-size 64)
(emms-browser-thumbnail-medium-size 128)
(emms-browser-covers #'emms-browser-cache-thumbnail-async)
(emms-playlist-default-major-mode 'emms-mark-mode))
:general
(phundrak/undefine
:keymaps 'emms-browser-mode-map
:packages 'emms
"s" nil
"r" nil)
(phundrak/evil
:keymaps 'emms-browser-mode-map
:packages 'emms
"a" #'emms-browser-add-tracks
"A" #'emms-browser-add-tracks-and-play
"b" '(:ignore t :which-key "browse by")
"bA" #'emms-browse-by-album
"ba" #'emms-browse-by-artist
"bg" #'emms-browse-by-genre
"bs" #'emms-smart-browse
"by" #'emms-browse-by-year
"c" #'emms-browser-clear-playlist
"S" '(:ignore t :which-key "search")
"SA" '(emms-browser-search-by-album :which-key "by album")
"Sa" '(emms-browser-search-by-artist :which-key "by artist")
"Ss" '(emms-browser-search-by-names :which-key "by name")
"St" '(emms-browser-search-by-names :which-key "by title")
"q" #'kill-this-buffer)
(phundrak/evil
:keymaps 'emms-playlist-mode-map
:packages 'emms
"d" #'emms-playlist-mode-kill-track
"p" #'emms-playlist-mode-play-smart
"q" #'kill-this-buffer)
(phundrak/leader-key
:infix "m"
:packages 'emms
"" '(:ignore t :which-key "media")
"." #'hydra-media/body
"«" #'emms-player-mpd-previous
"»" #'emms-player-mpd-next
"c" #'emms-player-mpd-clear
"e" '(:ignore t :which-key "emms")
"eb" #'emms-browser
"ep" #'emms-playlist-mode-go
"es" #'emms-player-mpd-show
"p" '((lambda ()
(interactive)
(shell-command-and-echo "mpc toggle"))
:which-key "mpc toggle")
"s" #'emms-stop
"u" '(:ignore t :which-key "update")
"um" #'emms-player-mpd-update-all
"uc" #'emms-cache-set-from-mpd-all))Finding files from EMMS
EMMS has two default ways of finding files: either a built-in function
relatively slow but portable, or with find which is arguably faster
but less portable. Honestly, I don’t care about portability, I’ll
always use this Emacs config on Linux, but I don’t want to use find
either since there is something even faster: fd.
First we’ll declare a variable that can hold the path to the fd
executable:
(defvar emms-source-file-fd (executable-find "fd"))
Then, we need to declare a new function that will use fd to find
files. The function, as specified by the documentation of
emms-source-file-directory-tree-function, receives two arguments dir
and regex. We can work with that!
(defun emms-source-file-directory-tree-fd (dir regex)
"Return a list of all files under DIR that match REGEX.
This function uses the external fd utility. The name for fd may
be supplied using `emms-source-file-fd'."
(with-temp-buffer
(call-process emms-source-file-fd
nil t nil
"-L" ; follow symlinks
regex
"-t f"
(expand-file-name dir))
(delete ""
(split-string (buffer-substring (point-min)
(point-max))
"\n"))))We can finally set this function as our search function.
(setq emms-source-file-directory-tree-function #'emms-source-file-directory-tree-fd)Keybinds
I also want to create a small hydra for manipulating MPD:
(defun shell-command-and-echo (command &optional echo prefix)
"Run COMMAND and display the result of ECHO prefixed by PREFIX.
Run COMMAND as a shell command.
If ECHO is non nil, display the result of its execution as a
shell command to the minibuffer through `MESSAGE'.
If PREFIX is non nil, it will prefix the output of ECHO in the
minibuffer, both separated by a single space."
(progn
(with-temp-buffer
(shell-command command
(current-buffer)
(current-buffer))
(when echo
(message "%s%s"
(if prefix
(concat prefix " ")
"")
(string-trim
(shell-command-to-string "mpc volume")))))))
(defhydra hydra-media (:hint nil)
"
%s(all-the-icons-material \"volume_up\" :height 1.0 :v-adjust -0.2)
[_s_]
« [_c_] _p_ [_r_] » [_S_] %s(all-the-icons-material \"stop\")
[_t_]
%s(all-the-icons-material \"volume_down\" :height 1.0 :v-adjust -0.2)
"
("c" emms-player-mpd-previous)
("r" emms-player-mpd-next)
("t" (shell-command-and-echo "mpc volume -2" "mpc volume" "mpc"))
("s" (shell-command-and-echo "mpc volume +2" "mpc volume" "mpc"))
("p" (shell-command-and-echo "mpc toggle"))
("S" emms-player-mpd-stop)
("q" nil :exit t))Nov
Nov is a major-mode for reading EPUB files within Emacs. Since I have it, I don’t need any other Epub reader on my computer! Plus this one is customizable and programmable, why would I use any other EPUB reader?
(use-package nov
:straight (:build t)
:defer t
:mode ("\\.epub\\'" . nov-mode)
:general
(phundrak/evil
:keymaps 'nov-mode-map
:packages 'nov
"c" #'nov-previous-document
"t" #'nov-scroll-up
"C-d" #'nov-scroll-up
"s" #'nov-scroll-down
"C-u" #'nov-scroll-down
"r" #'nov-next-document
"gm" #'nov-display-metadata
"gn" #'nov-next-document
"gp" #'nov-previous-document
"gr" #'nov-render-document
"gt" #'nov-goto-toc
"gv" #'nov-view-source
"gV" #'nov-view-content-source)
:config
(setq nov-text-width 95))PDF Tools
pdf-tools enables PDF support for Emacs, much better than its built-in
support with DocView. Aside from the classical settings such as
keybinds, I also enable the midnight colors by default; think of it as
an equivalent of Zathura’s recolor feature which kind of enables a
dark mode for PDFs.
(use-package pdf-tools
:defer t
:magic ("%PDF" . pdf-view-mode)
:straight (:build t)
:mode (("\\.pdf\\'" . pdf-view-mode))
:hook (pdf-tools-enabled . pdf-view-midnight-minor-mode)
:general
(phundrak/evil
:keymaps 'pdf-view-mode-map
:packages 'pdf-tools
"y" #'pdf-view-kill-ring-save
"t" #'evil-collection-pdf-view-next-line-or-next-page
"s" #'evil-collection-pdf-view-previous-line-or-previous-page)
(phundrak/major-leader-key
:keymaps 'pdf-view-mode-map
:packages 'pdf-tools
"a" '(:ignore t :which-key "annotations")
"aD" #'pdf-annot-delete
"at" #'pdf-annot-attachment-dired
"ah" #'pdf-annot-add-highlight-markup-annotation
"al" #'pdf-annot-list-annotations
"am" #'pdf-annot-markup-annotation
"ao" #'pdf-annot-add-strikeout-markup-annotation
"as" #'pdf-annot-add-squiggly-markup-annotation
"at" #'pdf-annot-add-text-annotation
"au" #'pdf-annot-add-underline-markup-annotation
"f" '(:ignore t :which-key "fit")
"fw" #'pdf-view-fit-width-to-window
"fh" #'pdf-view-fit-height-to-window
"fp" #'pdf-view-fit-page-to-window
"s" '(:ignore t :which-key "slice/search")
"sb" #'pdf-view-set-slice-from-bounding-box
"sm" #'pdf-view-set-slice-using-mouse
"sr" #'pdf-view-reset-slice
"ss" #'pdf-occur
"o" 'pdf-outline
"m" 'pdf-view-midnight-minor-mode)
:config
(with-eval-after-load 'pdf-view
(setq pdf-view-midnight-colors '("#d8dee9" . "#2e3440"))))
One thing pdf-tools doesn’t handle is restoring the PDF to the last
point it was visited — in other words, open the PDF where I last
left it.
(use-package pdf-view-restore
:after pdf-tools
:defer t
:straight (:build t)
:hook (pdf-view-mode . pdf-view-restore-mode)
:config
(setq pdf-view-restore-filename (expand-file-name ".tmp/pdf-view-restore"
user-emacs-directory)))Project Management
Magit
Magit is an awesome wrapper around Git for Emacs! Very often, I go from disliking to really hating Git GUI clients because they often obfuscate which Git commands are used to make things happen. Such a thing doesn’t happen with Magit, it’s pretty transparent but it still provides some awesome features and visualizations of what you are doing and what Git is doing! In short, I absolutely love it!
(use-package magit
:straight (:build t)
:defer t
:custom
(magit-display-buffer-function #'magit-display-buffer-same-window-except-diff-v1)
:config
(setq magit-clone-default-directory "~/fromGIT/")
:general
(:keymaps '(git-rebase-mode-map)
:packages 'magit
"C-t" #'evil-next-line
"C-s" #'evil-previous-line)
(phundrak/major-leader-key
:keymaps 'git-rebase-mode-map
:packages 'magit
"," #'with-editor-finish
"k" #'with-editor-cancel
"a" #'with-editor-cancel)
(phundrak/leader-key
:infix "g"
:packages 'magit
"" '(:ignore t :wk "git")
"b" #'magit-blame
"c" #'magit-clone
"d" #'magit-dispatch
"i" #'magit-init
"s" #'magit-status
"y" #'my/yadm
"S" #'magit-stage-file
"U" #'magit-unstage-file
"f" '(:ignore t :wk "file")
"fd" #'magit-diff
"fc" #'magit-file-checkout
"fl" #'magit-file-dispatch
"fF" #'magit-find-file))Alphapapa also created an awesome package for Magit: magit-todos which display in the Magit buffer a list of TODOs found in the current project to remind you of what to do next.
(use-package magit-todos
:straight (:build t)
:after magit
:config
(setq magit-todos-ignore-case t))
Finally, it is also possible to use Gitflow’s framework with Magit
with magit-gitflow:
(use-package magit-gitflow
:defer t
:after magit
:straight (magit-gitflow :build t
:type git
:host github
:repo "jtatarik/magit-gitflow")
:hook (magit-mode . turn-on-magit-gitflow))Forge
NOTE: Make sure to configure a GitHub token before using this package!
(use-package forge
:after magit
:straight (:build t))Projectile
(use-package ripgrep
:straight (:build t)
:defer t)(use-package projectile
:straight (:build t)
:diminish projectile-mode
:config (projectile-mode)
:custom ((projectile-completion-system 'ivy))
:bind-keymap
("C-c p" . projectile-command-map)
:init
(setq projectile-switch-project-action #'projectile-dired)
:config
(add-to-list 'projectile-ignored-projects "~/"))(use-package counsel-projectile
:straight (:build t)
:after (counsel projectile)
:config (counsel-projectile-mode))Recentf
The built-in package recentf keeps track of recently opened files. But
by default, it only follows the twenty most recent files, that not
nearly enough for me, so I raise it to two hundred. I also don’t want
recentf to follow the Elfeed database, so I add it to the list of
excluded files.
(use-package recentf
:straight (:build t :type built-in)
:custom ((recentf-max-saved-items 200))
:init
(add-to-list 'recentf-exclude (rx (* any)
"elfeed-db"
(* any))))Screenshot
(use-package screenshot
:defer t
:straight (screenshot :build t
:type git
:host github
:repo "tecosaur/screenshot")
:config (load-file (locate-library "screenshot.el")))Shells
Shell-pop
Shell-pop allows the user to easily call for a new shell in a pop-up buffer.
(use-package shell-pop
:defer t
:straight (:build t)
:custom
(shell-pop-default-directory "/home/phundrak")
(shell-pop-shell-type (quote ("eshell" "*eshell*" (lambda () (eshell shell-pop-term-shell)))))
(shell-pop-window-size 30)
(shell-pop-full-span nil)
(shell-pop-window-position "bottom")
(shell-pop-autocd-to-working-dir t)
(shell-pop-restore-window-configuration t)
(shell-pop-cleanup-buffer-at-process-exit t))VTerm
(use-package vterm
:defer t
:straight t
:config
(setq vterm-shell "/usr/bin/fish"))XWidgets Webkit Browser
I used to use the xwidgets webkit browser in order to view or preview HTML files from Emacs, but it seems the Cairo background transparency patch breaks it. So while this isn’t patched, I will disable Xwidgets in my Emacs build, and these keybinds will not be tangled.
(phundrak/evil
:keymaps 'xwidget-webkit-mode-map
"<mouse-4>" #'xwidget-webkit-scroll-down-line
"<mouse-5>" #'xwidget-webkit-scroll-up-line
"c" #'xwidget-webkit-scroll-backward
"t" #'xwidget-webkit-scroll-up-line
"s" #'xwidget-webkit-scroll-down-line
"r" #'xwidget-webkit-scroll-forward
"h" #'xwidget-webkit-goto-history
"C" #'xwidget-webkit-back
"R" #'xwidget-webkit-forward
"C-r" #'xwidget-webkit-reload
"j" nil
"k" nil
"l" nil
"H" nil
"L" nil
"C-d" #'xwidget-webkit-scroll-up
"C-u" #'xwidget-webkit-scroll-down)Wttr.in
(use-package wttrin
:defer t
:straight (wttrin :build t
:local-repo "~/fromGIT/emacs-packages/emacs-wttrin"
:type git)
;; :host github
;; :repo "Phundrak/emacs-wttrin"
:config
(setq wttrin-default-cities '("Aubervilliers" "Paris" "Lyon" "Nonières" "Saint Agrève")
wttrin-use-metric t))Editing
First, I’ll define some keybindings for easily inserting pairs when editing text.
(general-define-key
:states 'visual
"M-[" #'insert-pair
"M-{" #'insert-pair
"M-<" #'insert-pair
"M-'" #'insert-pair
"M-`" #'insert-pair
"M-\"" #'insert-pair)Atomic Chrome
Why write in your browser when you could write with Emacs? Despite its name, this package isn’t only geared towards Chrome/Chromium-based browsers but also towards Firefox since its 2.0 version. I find it a bit unfortunate Chrome’s name stuck in the package’s name though.
(use-package atomic-chrome
:straight (:build t)
:init
(atomic-chrome-start-server))Evil Nerd Commenter
Emacs’ default commenting system is nice, but I don’t find it smart enough for me.
(use-package evil-nerd-commenter
:after evil
:straight (:build t))Iedit
Iedit is a powerful text editing tool that can be used to refactor code through the edition of multiple regions at once, be it in a region or in a whole buffer.
(use-package iedit
:defer t
:straight (:build t)
:general
(phundrak/leader-key
:infix "r"
:packages 'iedit
"" '(:ignore t :which-key "refactor")
"i" #'iedit-mode))Since I’m using evil, I’ll also use a compatibility package that adds states for iedit.
(use-package evil-iedit-state
:after iedit
:defer t
:straight (:build t)
:commands (evil-iedit-state evil-iedit-state/iedit-mode)
:init
(setq iedit-curent-symbol-default t
iedit-only-at-symbol-boundaries t
iedit-toggle-key-default nil))Parinfer
Don’t let the name of the package fool you! parinfer-rust-mode is not
a parinfer mode for rust-mode, but a mode for parinfer-rust. parinfer
was a project for handling parenthesis and other double markers in a
much more intuitive way when writing Lisp code. However, it is now out
of date (last commit was on January 2nd, 2019) and the repository has
since been archived. New implementations then appeared, one of them is
parinfer-rust, obviously written in Rust, around which
parinfer-rust-mode is built. Enabling parinfer-rust-mode should also
automatically disable smartparens-mode in order to avoid conflicting
behavior.
(use-package parinfer-rust-mode
:defer t
:straight (:build t)
:diminish parinfer-rust-mode
:hook emacs-lisp-mode common-lisp-mode scheme-mode
:init
(setq parinfer-rust-auto-download t
parinfer-rust-library-directory (concat user-emacs-directory
"parinfer-rust/"))
(add-hook 'parinfer-rust-mode-hook
(lambda () (smartparens-mode -1)))
:general
(phundrak/major-leader-key
:keymaps 'parinfer-rust-mode-map
"m" #'parinfer-rust-switch-mode
"M" #'parinfer-rust-toggle-disable))Smartparens
smartparens is a package similar to parinfer, but while the latter is
more specialized for Lisp dialects, smartparens works better with
other programming languages that still uses parenthesis, but not as
much as Lisp dialects; think for example C, C++, Rust, Javascript, and
so on.
(use-package smartparens
:defer t
:straight (:build t)
:hook (prog-mode . smartparens-mode))
string-edit
string-edit is a cool package that allows the user to write naturally
a string and get it automatically escaped for you. No more manually
escaping your strings!
(use-package string-edit
:defer t
:straight (:build t))Writeroom
On the other hand, writeroom allows the user to enter a
distraction-free mode of Emacs, and I like that! But the default width
is a bit too small for me, and I prefer not to go fullscren.
(use-package writeroom-mode
:defer t
:straight (:build t)
:config
(setq writeroom-width 100
writeroom-fullscreen-effect nil
writeroom-maximize-window nil
writeroom-mode-line t))Emacs built-ins
Dired
Dired is Emacs’ built-in file manager. It’s really great, and replaces any graphical file manager for me most of the time because:
- I am not limited to x tabs or panes
- All actions can be done with keybindings
- I get a consistent behavior between Dired and Emacs, since it’s the same thing.
However, the only thing I lack still is thumbnails. In any case, I need still to make some tweaks in order to make it usable for me.
(use-package dired
:straight (:type built-in)
:defer t
:hook (dired-mode . turn-on-gnus-dired-mode)
:general
(phundrak/evil
:keymaps 'dired-mode-map
:packages 'dired
"(" #'dired-hide-details-mode
"n" #'evil-next-line
"p" #'evil-previous-line)
:config
(setq dired-dwim-target t
dired-recursive-copies t
dired-recursive-deletes t
dired-listing-switches "-ahl --group-directories-first"))
Note that I am activating by default gnus-dired-mode. This is just for
the sake of convenience, since I’m not penalized with activating this
mode when it is not needed, but I don’t have to manually activate it
each time I need it.
Dired-x stands for “dired extra” which provides a couple more features that are for some reason not included in dired yet.
(use-package dired-x
:straight (:type built-in)
:after dired
:commands (dired-jump dired-jump-other-window dired-omit-mode)
:general
(phundrak/evil
:keymaps 'dired-mode-map
:packages 'dired-x
"«" #'dired-omit-mode))
dired-du provides the user with the option to be able to see the size
of directories as they are, rather than just the size of their
inode. However, I will not enable it by default as it can take some
time to get the actual size of a directory.
(use-package dired-du
:after dired
:straight (:build t)
:general
(phundrak/evil
:keymaps 'dired-mode-map
:packages 'dired-du
"»" #'dired-du-mode))
This package on the other hand provides Git information to the user in
the current dired buffer in a similar way to how Github and Gitea
display the latest commit message and its age about a file in the file
tree. And by default, I want dired-git-info to hide file details.
(use-package dired-git-info
:after (dired)
:straight (:build t)
:hook (dired-after-reading . dired-git-info-auto-enable)
:general
(phundrak/evil
:keymaps 'dired-mode-map
:packages 'dired-git-info
")" #'dired-git-info-mode)
:config
(setq dgi-auto-hide-details-p t))Diredfl makes dired colorful, and much more readable in my opinion.
(use-package diredfl
:after (dired all-the-icons)
:straight (:build t)
:init
(diredfl-global-mode 1))And let’s add some fancy icons in dired!
(use-package all-the-icons-dired
:after (all-the-icons)
:straight (:build t)
:defer t
:hook (dired-mode . all-the-icons-dired-mode))(use-package image-dired+
:after (image-dired)
:straight (:build t)
:init (image-diredx-adjust-mode 1))Compilation mode
After reading about a blog article, I found out it is possible to run
quite a few things through compilation-mode, so why not? First, let’s
redefine some keybinds for this mode. I’ll also define a general
keybind in order to re-run my programs from other buffers than the
compilation-mode buffer. I also want to follow the output of the
compilation buffer, as well as enable some syntax highlighting.
(use-package compile
:defer t
:straight (compile :type built-in)
:hook (compilation-mode . colorize-compilation-buffer)
:init
(require 'ansi-color)
(defun colorize-compilation-buffer ()
(let ((inhibit-read-only t))
(ansi-color-apply-on-region (point-min) (point-max))))
:general
(phundrak/evil
:keymaps 'compilation-mode-map
"g" nil
"r" nil
"R" #'recompile
"h" nil)
(phundrak/leader-key
"R" #'recompile)
:config
(setq compilation-scroll-output t))Eshell
Eshell is a built-in shell available from Emacs which I use almost as often as fish. Some adjustments are necessary to make it fit my taste though.
(use-package eshell
:defer t
:straight (:type built-in :build t)
:general
(phundrak/evil
:keymaps 'eshell-mode-map
"c" #'evil-backward-char
"t" #'evil-next-line
"s" #'evil-previous-line
"r" #'evil-forward-char)
(general-define-key
:keymaps 'eshell-mode-map
:states 'insert
"C-a" #'eshell-bol
"C-e" #'end-of-line)
:config
<<eshell-alias-file>>
<<eshell-concat-shell-command>>
<<eshell-alias-open>>
<<eshell-alias-buffers>>
<<eshell-alias-emacs>>
<<eshell-alias-mkcd>>)Aliases
First, let’s declare our list of “dumb” aliases we’ll use in Eshell. You can find them here.
(setq eshell-aliases-file (expand-file-name "eshell-aliases" user-emacs-directory))A couple of other aliases will be defined through custom Elisp functions, but first I’ll need a function for concatenating a shell command into a single string:
(defun phundrak/concatenate-shell-command (&rest command)
"Concatenate an eshell COMMAND into a single string.
All elements of COMMAND will be joined in a single
space-separated string."
(mapconcat #'identity command " "))
I’ll also declare some aliases here, such as open and openo that
respectively allow me to open a file in Emacs, and same but in another
window.
(defalias 'open #'find-file)
(defalias 'openo #'find-file-other-window)
The default behavior of eshell/clear is not great at all, although it
clears the screen it also scrolls all the way down. Therefore, let’s
alias it to eshell/clear-scrollback which has the correct behavior.
(defalias 'eshell/clear #'eshell/clear-scrollback)
As you see, these were not declared in my dedicated aliases file but
rather were declared programmatically. This is because I like to keep
my aliases file for stuff that could work too with other shells were
the syntax a bit different, and aliases related to Elisp are kept
programmatically. I’ll also declare list-buffers an alias of ibuffer
because naming it that way kind of makes more sense to me.
(defalias 'list-buffers 'ibuffer)
I still have some stupid muscle memory telling me to open emacs, vim
or nano in Eshell, which is stupid: I’m already inside Emacs and I
have all its power available instantly. So, let’s open each file
passed to these commands.
(defun eshell/emacs (&rest file)
"Open each FILE and kill eshell.
Old habits die hard."
(when file
(dolist (f (reverse file))
(find-file f t))))
Finally, I’ll declare mkcd which allows the simultaneous creation of a
directory and moving into this newly created directory. And of course,
it will also work if the directory also exists or if parent
directories don’t, similarly to the -p option passed to mkdir.
(defun eshell/mkcd (dir)
"Create the directory DIR and move there.
If the directory DIR doesn’t exist, create it and its parents
if needed, then move there."
(mkdir dir t)
(cd dir))Autosuggestion
I really like fish’s autosuggestion feature, so let’s reproduce it here!
(use-package esh-autosuggest
:defer t
:after eshell
:straight (:build t)
:hook (eshell-mode . esh-autosuggest-mode)
:general
(:keymaps 'esh-autosuggest-active-map
"C-e" #'company-complete-selection))Commands
When I’m in Eshell, sometimes I wish to open multiple files at once in
Emacs. For this, when I have several arguments for find-file, I want
to be able to open them all at once. Let’s modify find-file like so:
(defadvice find-file (around find-files activate)
"Also find all files within a list of files. This even works recursively."
(if (listp filename)
(cl-loop for f in filename do (find-file f wildcards))
ad-do-it))
I also want to be able to have multiple instances of Eshell opened at
once. For that, I declared the function eshell-new that does exactly
that.
(defun eshell-new ()
"Open a new instance of eshell."
(interactive)
(eshell 'N))
A very useful command I use often in fish is z, a port from bash’s and
zsh’s command that allows to jump around directories based on how
often we go in various directories.
(use-package eshell-z
:defer t
:after eshell
:straight (:build t)
:hook (eshell-mode . (lambda () (require 'eshell-z))))Environment Variables
Some environment variables need to be correctly set so Eshell can
correctly work. I would like to set two environment variables related
to Dart development: the DART_SDK and ANDROID_HOME variables.
(setenv "DART_SDK" "/opt/dart-sdk/bin")
(setenv "ANDROID_HOME" (concat (getenv "HOME") "/Android/Sdk/"))
The EDITOR variable also needs to be set for git commands, especially the
yadm commands.
(setenv "EDITOR" "emacsclient -c -a emacs")
Finally, for some specific situations I need SHELL to be set to
something more standard than fish:
(setenv "SHELL" "/bin/sh")Visual configuration
I like to have at quick glance some information about my machine when I fire up a terminal. I haven’t found anything that does that the way I like it, so I’ve written a package! It’s actually available on MELPA, but since I’m the main dev of this package, I’ll keep track of the git repository.
(use-package eshell-info-banner
:after (eshell)
:defer t
:straight (eshell-info-banner :build t
:type git
:host github
:protocol ssh
:repo "phundrak/eshell-info-banner.el")
:hook (eshell-banner-load . eshell-info-banner-update-banner)
:config
(setq eshell-info-banner-width 80
eshell-info-banner-partition-prefixes '("/dev" "zroot" "tank")))Another feature I like is fish-like syntax highlight, which brings some more colors to Eshell.
(use-package eshell-syntax-highlighting
:after (esh-mode eshell)
:defer t
:straight (:build t)
:config
(eshell-syntax-highlighting-global-mode +1))
Powerline prompts are nice, git-aware prompts are even better!
eshell-git-prompt is nice, but I prefer to write my own package for
that.
(use-package powerline-eshell
:load-path "~/fromGIT/emacs-packages/powerline-eshell.el/"
:after eshell)Eww
Since Emacs 29, it is possible to automatically rename eww buffers to
a more human-readable name, see Prot’s blog post on the matter.
(use-package eww
:defer t
:straight (:type built-in)
:config
(setq eww-auto-rename-buffer 'title))Info
Let’s define some more intuitive keybinds for info-mode.
(use-package info
:defer t
:straight (info :type built-in :build t)
:general
(phundrak/evil
:keymaps 'Info-mode-map
"c" #'Info-prev
"t" #'evil-scroll-down
"s" #'evil-scroll-up
"r" #'Info-next)
(phundrak/major-leader-key
:keymaps 'Info-mode-map
"?" #'Info-toc
"b" #'Info-history-back
"f" #'Info-history-forward
"m" #'Info-menu
"t" #'Info-top-node
"u" #'Info-up))Tramp
Tramp is an Emacs built-in package that allows the user to connect to
various hosts using various protocols, such as ssh and
rsync. However, I have some use-case for Tramp which are not
supported natively. I will describe them here.
(require 'tramp)
(use-package tramp
:straight (tramp :type built-in :build t)
:init
<<tramp-add-yadm>>)Yadm
yadm is a git wrapper made to easily manage your dotfiles. It has
loads of features I don’t use (the main one I like but don’t use is
its Jinja-like host and OS-aware syntax), but unfortunately Magit
doesn’t play nice with it. Tramp to the rescue, and this page explains
how! Let’s just insert in my config this code snippet:
(add-to-list 'tramp-methods
'("yadm"
(tramp-login-program "yadm")
(tramp-login-args (("enter")))
(tramp-login-env (("SHELL") ("/bin/sh")))
(tramp-remote-shell "/bin/sh")
(tramp-remote-shell-args ("-c"))))I’ll also create a fuction for connecting to this new Tramp protocol:
(defun my/yadm ()
"Manage my dotfiles through TRAMP."
(interactive)
(magit-status "/yadm::"))EXWM
So, I’m finally slowly getting back to EXWM. I tried it a couple of years ago, but that was with the SpacemacsOS layer on Spacemacs, on a laptop which got accidentaly formatted before I could save my config and all… So it got me some time to come back. I’m still a bit worried about Emacs being single threaded, so if I get one blocking function blocking Emacs, my whole desktop will hang, but for now I haven’t had this issue.
First, I need to install the X protocol Emacs Lisp Bindings. It doesn’t seem to be available in any repo, so I’ll install it directly from Git.
(use-package xelb
:straight (xelb :build t
:type git
:host github
:repo "emacs-straight/xelb"
:fork "ch11ng/xelb"))
Next is a function I’ve stolen copied from Daviwil’s desktop
configuration. This allows to launch software in the background
easily.
(defun exwm/run-in-background (command &optional once)
(let ((command-parts (split-string command " +")))
(apply #'call-process `(,(car command-parts) nil 0 nil ,@(cdr command-parts)))))
In order to launch Emacs with EXWM with startx, I need a xinit file.
This one is exported to $HOME/.xinitrc.emacs.
#!/bin/sh
xhost +SI:localuser:$USER
# Set fallback cursor
xsetroot -cursor_name left_ptr
# If Emacs is started in server mode, `emacsclient` is a convenient way to edit
# files in place (used by e.g. `git commit`)
export VISUAL=emacsclient
export EDITOR="$VISUAL"
# in case Java applications display /nothing/
# wmname LG3D
# export _JAVA_AWT_WM_NONREPARENTING=1
exec emacs --with-exwmEXWM itself
Now we come to the plat de résistance. Like with xelb, I’m using its
Git source to install it to make sure I get the right version — the
version available on the GNU ELPA is from the same source, true, but I
don’t know at which rate it is updated. And more packages down the
line will depend on this Git repository, so I might as well just clone
it right now.
As you can see, in the :config secion I added to two hooks functions
so buffers are accurately renamed. While the average X window will
simply get the name of the current X window, I want Firefox and
Qutebrowser to be prefixed with the name of the browser. Actually, all
these will be renamed this way:
- Kitty
- Qutebrowser
(format "%s\n%S"
(mapconcat (lambda (buffer)
(let ((buffer-name (car buffer)))
(format "(\"%s\" %S)"
(downcase buffer-name)
`(exwm-workspace-rename-buffer (concat ,buffer-name
" - "
exwm-title)))))
buffers
"\n")
'(_otherwise (exwm-workspace-rename-buffer exwm-title)))("kitty" (exwm-workspace-rename-buffer (concat "EXWM: " "Kitty" " - " exwm-title)))
("qutebrowser" (exwm-workspace-rename-buffer (concat "EXWM: " "Qutebrowser" " - " exwm-title)))
(_otherwise (exwm-workspace-rename-buffer exwm-title))
(add-hook 'exwm-update-class-hook
(lambda () (exwm-workspace-rename-buffer exwm-class-name)))
(add-hook 'exwm-update-title-hook
(lambda ()
(pcase exwm-class-name
<<exwm-gen-buffers-rename()>>)))
As you can see below, in the :config section I added two advices and one
hook in order to correctly integrate evil with EXWM. When I’m in an X
window, I want to be in insert-mode so I can type however I want.
However, when I exit one, I want to default back to normal-mode.
(add-hook 'exwm-manage-finish-hook (lambda () (call-interactively #'exwm-input-release-keyboard)))
(advice-add #'exwm-input-grab-keyboard :after (lambda (&optional id) (evil-normal-state)))
(advice-add #'exwm-input-release-keyboard :after (lambda (&optional id) (evil-insert-state)))
Secondly, I add i, C-SPC, and M-m as exwm prefix keys so they aren’t
sent directly to the X windows but caught by Emacs (and EXWM). I’ll
use the i key in normal-mode to enter insert-mode and have Emacs
release the keyboard so the X window can grab it. Initially, I had
s-<escape> as a keybind for grabbing back the keyboard from an X
window, as if I were in insert mode and wanted to go back to normal
mode, and I had s-I to toggle keyboard grabbing. But I found myself
more than once trying to use s-<escape> to toggle this state, s-I
completely forgotten. So I removed s-I and made s-<escape> behave like
s-I once did.
(general-define-key
:keymaps 'exwm-mode-map
:states 'normal
"i" #'exwm-input-release-keyboard)
(exwm-input-set-key (kbd "s-<escape>") #'exwm-input-toggle-keyboard)
(push ?\i exwm-input-prefix-keys)
(push (kbd "C-SPC") exwm-input-prefix-keys)
(push (kbd "M-m") exwm-input-prefix-keys)As stated a couple of times in my different configuration files, I’m using the bépo layout, which means the default keys in the number row are laid as follow:
(defconst exwm-workspace-keys '("\"" "«" "»" "(" ")" "@" "+" "-" "/" "*"))With this, we can create keybinds for going or sending X windows to workspaces 0 to 9.
(setq exwm-input-global-keys
`(,@exwm-input-global-keys
,@(mapcar (lambda (i)
`(,(kbd (format "s-%s" (nth i exwm-workspace-keys))) .
(lambda ()
(interactive)
(exwm-workspace-switch-create ,i))))
(number-sequence 0 9))
,@(mapcar (lambda (i)
`(,(kbd (format "s-%d" i)) .
(lambda ()
(interactive)
(exwm-workspace-move-window ,(let ((index (1- i)))
(if (< index 0)
(- 10 index)
;; FIXME: does not work with s-0
index))))))
(number-sequence 0 9))))
You can then see the list of the keybinds I have set for EXWM, which
are all prefixed with SPC x in normal mode (and C-SPC x in insert
mode), with the exception of s-RET which opens an eshell terminal.
(exwm-input-set-key (kbd "s-<return>") (lambda ()
(interactive)
(eshell)))
(phundrak/leader-key
:infix "x"
"" '(:ignore t :which-key "EXWM")
"k" #'exwm-input-send-next-key
"l" '((lambda ()
(interactive)
(start-process "" nil "plock"))
:which-key "lock")
"r" '(:ignore t :wk "rofi")
"rr" '((lambda () (interactive)
(with-temp-buffer
(shell-command "rofi -show drun" (current-buffer) (current-buffer))))
:wk "drun")
"rw" '((lambda () (interactive)
(with-temp-buffer "rofi -show window" (current-buffer) (current-buffer)))
:wk "windows")
"R" '(:ignore t :wk "restart")
"Rr" #'exwm-reset
"RR" #'exwm-restart
"t" '(:ignore t :which-key "toggle")
"tf" #'exwm-layout-toggle-fullscreen
"tF" #'exwm-floating-toggle-floating
"tm" #'exwm-layout-toggle-mode-line
"w" '(:ignore t :which-key "workspaces")
"wa" #'exwm-workspace-add
"wd" #'exwm-workspace-delete
"ws" #'exwm-workspace-switch
"x" '((lambda ()
(interactive)
(let ((command (string-trim (read-shell-command "RUN: "))))
(start-process command nil command)))
:which-key "run")
"RET" #'eshell-new)A couple of commands are also automatically executed:
-
mpc stop - stops any music played by MPD (if any) when Emacs is launched.
-
pumopm - my power manager, you can see its code source here.
-
xss-lock plock - automatically lock the desktop with my script plock.
-
xrdb -merge $HOME/.Xresources - use the settings from my xresources file
(mapconcat (lambda (command)
(let* ((whitespace (rx (+ space)))
(raw-command (car (split-string (car command) "::" t whitespace)))
(command (replace-regexp-in-string (regexp-quote "~") "" raw-command)))
(format "%S" `(exwm/run-in-background ,command))))
autostarts
"\n")(exwm/run-in-background "mpc stop") (exwm/run-in-background "pumopm") (exwm/run-in-background "xss-lock plock") (exwm/run-in-background "xrdb -merge $HOME/.Xresources")
Finally, let’s only initialize and start EXWM once functions from exwm-randr ran, because otherwise having multiple monitors don’t work.
(with-eval-after-load 'exwm-randr
(exwm-init))
The complete configuration for the exwm package can be found below.
(use-package exwm
:straight (exwm :build t
:type git
:host github
:repo "ch11ng/exwm")
:custom
(use-dialog-box nil "Disable dialog boxes since they are unusable in EXWM")
(exwm-input-line-mode-passthrough t "Pass all keypresses to emacs in line mode.")
:init
(require 'exwm-config)
(setq exwm-workspace-number 6)
:config
<<exwm-randr>>
<<exwm-buffers-name>>
<<exwm-advices-evil>>
<<exwm-prefix-keys>>
<<exwm-bepo-number-row>>
<<exwm-workspace-keybinds>>
<<exwm-keybinds>>
<<exwm-generate-autostarts()>>
<<exwm-init>>)EXWM-Evil integration
(use-package evil-exwm-state
:defer t
:after exwm
:straight (evil-exwm-state :build t
:type git
:host github
:repo "domenzain/evil-exwm-state"))Multimonitor support
(require 'exwm-randr)
(exwm/run-in-background "xwallpaper --zoom \"${cat $HOME/.cache/wallpaper}\"")
(start-process-shell-command
"xrandr" nil "xrandr --output eDP1 --mode 1920x1080 --pos 0x0 --rotate normal --output HDMI1 --primary --mode 2560x1080 --pos 1920x0 --rotate normal --output VIRTUAL1 --off --output DP-1-0 --off --output DP-1-1 --off")
(exwm-randr-enable)
(setq exwm-randr-workspace-monitor-plist '(3 "eDP1"))Keybinds for a desktop environment
(use-package desktop-environment
:defer t
:straight (desktop-environment :build t
:type git
:host github
:repo "DamienCassou/desktop-environment")
:after exwm
:diminish t
:config
(add-hook 'exwm-init-hook #'desktop-environment-mode)
(setq desktop-environment-update-exwm-global-keys :prefix
exwm-layout-show-al-buffers t)
(setq desktop-environment-bluetooth-command "bluetoothctl"
desktop-environment-brightness-get-command "xbacklight -get"
desktop-environment-brightness-get-regexp (rx line-start (group (+ digit)))
desktop-environment-brightness-set-command "xbacklight %s"
desktop-environment-brightness-normal-increment "-inc 5"
desktop-environment-brightness-normal-decrement "-dec 5"
desktop-environment-brightness-small-increment "-inc 2"
desktop-environment-brightness-small-decrement "-dec 2"
desktop-environment-volume-normal-decrement "5%-"
desktop-environment-volume-normal-increment "5%+"
desktop-environment-volume-small-decrement "2%-"
desktop-environment-volume-small-increment "2%+"
desktop-environment-volume-set-command "amixer -q Master %s unmute"
desktop-environment-screenshot-directory "~/Pictures/Screenshots"
desktop-environment-screenlock-command "plock"
desktop-environment-music-toggle-command "mpc toggle"
desktop-environment-music-previous-command "mpc prev"
desktop-environment-music-next-command "mpc next"
desktop-environment-music-stop-command "mpc stop")
(general-define-key
"<XF86AudioPause>" (lambda () (interactive)
(with-temp-buffer
(shell-command "mpc pause" (current-buffer) (current-buffer)))))
(desktop-environment-mode))Bluetooth
(defvar bluetooth-command "bluetoothctl")(defun bluetooth-turn-on ()
(interactive)
(let ((process-connection-type nil))
(start-process "" nil bluetooth-command "power" "on")))(defun bluetooth-turn-off ()
(interactive)
(let ((process-connection-type nil))
(start-process "" nil bluetooth-command "power" "off")))(defun create-bluetooth-device (raw-name)
"Create a bluetooth device cons from RAW NAME.
The cons will hold first the MAC address of the device, then its
human-friendly name."
(let ((split-name (split-string raw-name " " t)))
`(,(mapconcat #'identity (cddr split-name) " ") . ,(cadr split-name))))(require 'dbus)
(defun bluetooth-get-devices ()
(let ((bus-list (dbus-introspect-get-node-names :system "org.bluez" "/org/bluez/hci0")))
(mapcar (lambda (device)
`(,(dbus-get-property :system
"org.bluez"
(concat "/org/bluez/hci0/" device)
"org.bluez.Device1"
"Alias")
. ,device))
bus-list)))(defun bluetooth-connect-device ()
(interactive)
(progn
(bluetooth-turn-on)
(let* ((devices (bluetooth-get-devices))
(device (alist-get (completing-read "Device: " devices)
devices nil nil #'string=)))
(dbus-call-method-asynchronously
:system "org.bluez"
(concat "/org/bluez/hci0" device)
"org.bluez.Device1"
"Connect"
(lambda (&optional msg)
(when msg (message "%s" msg)))))))Making my life easier
Bufler
Bufler is a package that organizes and lists buffers in a much better
way than how they are usually sorted. You can easily and quickly find
buffers by their group, not only by their name, and THIS is great
news! Also, no helm please! And for some reasons the keybindings are
borked by default, so let’s redefine them, and let’s also rebind SPC
to p since it would conflict with my main general prefix.
(use-package bufler
:straight (bufler :build t
:files (:defaults (:exclude "helm-bufler.el")))
:defer t
:general
(phundrak/evil
:keymaps 'bufler-list-mode-map
:packages 'bufler
"?" #'hydra:bufler/body
"g" #'bufler
"f" #'bufler-list-group-frame
"F" #'bufler-list-group-make-frame
"N" #'bufler-list-buffer-name-workspace
"k" #'bufler-list-buffer-kill
"p" #'bufler-list-buffer-peek
"s" #'bufler-list-buffer-save
"RET" #'bufler-list-buffer-switch))Helpful
As the name tells, helpful is a really helpful package which greatly
enhances a couple of built-in functions from Emacs, namely:
| Vanilla Emacs Function | Helpful Function | Comment |
|---|---|---|
describe-function |
helpful-callable |
Only interactive functions |
describe-function |
helpful-function |
Only actual functions (including interactive) |
describe-function |
helpful-macro |
|
describe-command |
helpful-command |
|
describe-key |
helpful-key |
|
describe-variable |
helpful-variable |
(use-package helpful
:straight (:build t)
:after (counsel ivy)
:custom
(counsel-describe-function-function #'helpfull-callable)
(counsel-describe-variable-function #'helpfull-variable)
:bind
([remap describe-function] . counsel-describe-function)
([remap describe-command] . helpful-command)
([remap describe-variable] . counsel-describe-variable)
([remap describe-key] . helpful-key))LaTeX
(use-package auctex
:defer t
:straight (:build t)
:hook (tex-mode . lsp-deferred)
:hook (latex-mode . lsp-deferred)
:init
(setq TeX-command-default (if (executable-find "latexmk") "LatexMk" "LaTeX")
TeX-engine (if (executable-find "xetex") 'xetex 'default)
TeX-auto-save t
TeX-parse-self t
TeX-syntactic-comment t
TeX-auto-local ".auctex-auto"
TeX-style-local ".auctex-style"
TeX-source-correlate-mode t
TeX-source-correlate-method 'synctex
TeX-source-correlate-start-server nil
TeX-electric-sub-and-superscript t
TeX-fill-break-at-separators nil
TeX-save-query t)
:config
<<latex-fontification>>
(setq TeX-master t)
(setcar (cdr (assoc "Check" TeX-command-list)) "chktex -v6 -H %s")
(add-hook 'TeX-mode-hook (lambda ()
(setq ispell-parser 'tex
fill-nobreak-predicate (cons #'texmathp fill-nobreak-predicate))))
(add-hook 'TeX-mode-hook #'visual-line-mode)
(add-hook 'TeX-update-style-hook #'rainbow-delimiters-mode)
:general
(phundrak/major-leader-key
:packages 'auctex
:keymaps '(latex-mode-map LaTeX-mode-map)
"v" '(TeX-view :which-key "View")
"c" '(TeX-command-run-all :which-key "Compile")
"m" '(TeX-command-master :which-key "Run a command")))From Doom Emacs’ configuration:
(setq font-latex-match-reference-keywords
'(;; BibLaTeX.
("printbibliography" "[{") ("addbibresource" "[{")
;; Standard commands.
("cite" "[{") ("citep" "[{")
("citet" "[{") ("Cite" "[{")
("parencite" "[{") ("Parencite" "[{")
("footcite" "[{") ("footcitetext" "[{")
;; Style-specific commands.
("textcite" "[{") ("Textcite" "[{")
("smartcite" "[{") ("Smartcite" "[{")
("cite*" "[{") ("parencite*" "[{")
("supercite" "[{")
;; Qualified citation lists.
("cites" "[{") ("Cites" "[{")
("parencites" "[{") ("Parencites" "[{")
("footcites" "[{") ("footcitetexts" "[{")
("smartcites" "[{") ("Smartcites" "[{")
("textcites" "[{") ("Textcites" "[{")
("supercites" "[{")
;; Style-independent commands.
("autocite" "[{") ("Autocite" "[{")
("autocite*" "[{") ("Autocite*" "[{")
("autocites" "[{") ("Autocites" "[{")
;; Text commands.
("citeauthor" "[{") ("Citeauthor" "[{")
("citetitle" "[{") ("citetitle*" "[{")
("citeyear" "[{") ("citedate" "[{")
("citeurl" "[{")
;; Special commands.
("fullcite" "[{")
;; Cleveref.
("cref" "{") ("Cref" "{")
("cpageref" "{") ("Cpageref" "{")
("cpagerefrange" "{") ("Cpagerefrange" "{")
("crefrange" "{") ("Crefrange" "{")
("labelcref" "{")))
(setq font-latex-match-textual-keywords
'(;; BibLaTeX brackets.
("parentext" "{") ("brackettext" "{")
("hybridblockquote" "[{")
;; Auxiliary commands.
("textelp" "{") ("textelp*" "{")
("textins" "{") ("textins*" "{")
;; Subcaption.
("subcaption" "[{")))
(setq font-latex-match-variable-keywords
'(;; Amsmath.
("numberwithin" "{")
;; Enumitem.
("setlist" "[{") ("setlist*" "[{")
("newlist" "{") ("renewlist" "{")
("setlistdepth" "{") ("restartlist" "{")
("crefname" "{")))(use-package smartparens-latex
:after auctex
:defer t
:straight (:build t)
:config
(let ((modes '(tex-mode plain-tex-mode latex-mode LaTeX-mode)))
;; From DoomEmacs
;; We have to use lower case modes here, because `smartparens-mode' uses
;; the same during configuration.
(dolist (open '("\\left(" "\\left[" "\\left\\{" "\\left|"
"\\bigl(" "\\biggl(" "\\Bigl(" "\\Biggl(" "\\bigl["
"\\biggl[" "\\Bigl[" "\\Biggl[" "\\bigl\\{" "\\biggl\\{"
"\\Bigl\\{" "\\Biggl\\{"
"\\lfloor" "\\lceil" "\\langle"
"\\lVert" "\\lvert" "`"))
(sp-local-pair modes open nil :actions :rem))
(sp-local-pair-modes $``$ nil :unless '(:add sp-in-math-p))))(after! latex
(setq LaTeX-section-hook
'(LaTeX-section-heading
LaTeX-section-title
LaTeX-section-toc
LaTeX-section-section
LaTeX-section-label)
LaTeX-fill-break-at-separators nil
LaTeX-item-indent 0))(after! preview
(add-hook 'LaTeX-mode-hook #'LaTeX-preview-setup)
(setq-default preview-scale 1.4
preview-scale-function
(lambda () (* (/ 10.0 (preview-document-pt)) preview-scale)))
(setq preview-auto-cache-preamble nil)
(phundrak/major-leader-key
:packages 'auctex
:keymaps '(latex-mode-map LaTeX-mode-map)
"p" #'preview-at-point
"P" #'preview-clearout-at-point))(use-package cdlatex
:defer t
:after auctex
:straight (:build t)
:hook (LaTeX-mode . cdlatex-mode)
:hook (org-mode . org-cdlatex-mode)
:config
(setq cdlatex-use-dollar-to-ensure-math nil)
:general
(phundrak/major-leader-key
:packages 'cdlatex
:keymaps 'cdlatex-mode-map
"$" nil
"(" nil
"{" nil
"[" nil
"|" nil
"<" nil
"^" nil
"_" nil
[(control return)] nil))(use-package adaptive-wrap
:defer t
:after auctex
:straight (:build t)
:hook (LaTeX-mode . adaptative-wrap-prefix-mode)
:init (setq-default adaptative-wrap-extra-indent 0))(use-package auctex-latexmk
:after auctex
:defer t
:straight (:build t)
:init
(setq auctex-latexmk-inherit-TeX-PDF-mode t)
(add-hook 'LaTeX-mode (lambda () (setq TeX-command-default "LatexMk")))
:config
(auctex-latexmk-setup))(use-package company-auctex
:defer t
:after (company auctex)
:straight (:build t)
:config
(company-auctex-init))(use-package company-math
:defer t
:straight (:build t)
:after (company auctex)
:config
(defun my-latex-mode-setup ()
(setq-local company-backends
(append '((company-math-symbols-latex company-latex-commands))
company-backends)))
(add-hook 'TeX-mode-hook #'my-latex-mode-setup))Org-mode
Since recently, in order to make org-cite compile properly, we need
the citeproc package, a citation processor.
(use-package citeproc
:after (org)
:defer t
:straight (:build t))Org is the main reason I am using Emacs. It is an extremely powerfu tool when you want to write anything that is not necessarily primarily programming-related, though it absolutely can be! Org can be a replacement for anything similar to LibreOffice Writer, LibreOffice Calc, and LibreOffice Impress. It is a much more powerful (and older) version of Markdown which can be exported to LaTeX and HTML at least, rendering writing web pages and technical, scientific documents much simpler than writing manually HTML and LaTeX code, especially when a single document source is meant to be exported for both formats. And since org is an Emacs package, that also means it can be greatly extended however we like!
(use-package org
:straight t
:defer t
:commands (orgtbl-mode)
:hook ((org-mode . visual-line-mode)
(org-mode . org-num-mode))
:custom-face
(org-macro ((t (:foreground "#b48ead"))))
:init
(auto-fill-mode -1)
:config
<<org-hydra-babel>>
(require 'ox-beamer)
(setq org-hide-leading-stars nil
org-hide-macro-markers t
org-ellipsis " ⤵"
org-image-actual-width 600
org-redisplay-inline-images t
org-display-inline-images t
org-startup-with-inline-images "inlineimages"
org-pretty-entities t
org-fontify-whole-heading-line t
org-fontify-done-headline t
org-fontify-quote-and-verse-blocks t
org-startup-indented t
org-startup-align-all-tables t
org-use-property-inheritance t
org-list-allow-alphabetical t
org-M-RET-may-split-line nil
org-src-window-setup 'split-window-below
org-src-fontify-natively t
org-src-tab-acts-natively t
org-src-preserve-indentation t
org-log-done 'time
org-directory "~/org"
org-default-notes-file (expand-file-name "notes.org" org-directory))
<<org-agenda-files>>
<<org-behavior-electric>>
<<org-capture-target-files>>
<<org-capture-templates>>
<<org-babel-load-languages>>
<<org-use-sub-superscripts>>
<<org-latex-compiler>>
<<org-latex-listings>>
<<org-latex-default-packages>>
<<org-export-latex-hyperref-format>>
<<org-export-latex-minted-options>>
<<org-latex-pdf-process>>
<<org-latex-logfiles-add-extensions>>
<<org-re-reveal>>
<<org-html-validation>>
<<org-latex-classes>>
<<org-publish-projects>>
<<org-mode-visual-prettify-symbols>>
:general
(phundrak/evil
:keymaps 'org-mode-map
:packages 'org
"RET" 'org-open-at-point)
(phundrak/major-leader-key
:keymaps 'org-mode-map
:packages 'org
<<general-keybindings-gen(table=org-keybinds-various)>>
<<general-keybindings-gen(table=org-keybinds-babel)>>
<<general-keybindings-gen(table=org-keybinds-dates)>>
<<general-keybindings-gen(table=org-keybinds-insert)>>
<<general-keybindings-gen(table=org-keybinds-jump)>>
<<general-keybindings-gen(table=org-keybinds-tables)>>
<<general-keybindings-gen(table=org-keybinds-toggles)>>)
<<org-capture-keybinds>>
(phundrak/major-leader-key
:packages 'org
:keymaps 'org-src-mode-map
"'" #'org-edit-src-exit
"k" #'org-edit-src-abort))
The main feature from evil-org that I love is how easy it is to modify
some keybindings for keyboards layouts that do not have hjkl, such as
the bépo layout (or Dvorak or Colemak if you are into that). But it
also adds a ton of default keybindings which are just much more
comfortable than the default ones you get with evil and org naked.
(use-package evil-org
:straight (:build t)
:after (org)
:hook (org-mode . evil-org-mode)
:config
(setq-default evil-org-movement-bindings
'((up . "s")
(down . "t")
(left . "c")
(right . "r")))
(evil-org-set-key-theme '(textobjects navigation calendar additional shift operators))
(require 'evil-org-agenda)
(evil-org-agenda-set-keys))This package is a small package I’ve written that helps me when writing conlanging documents, with features such as creating syntax trees, converting translitterated text to its native script, etc…
(use-package conlanging
:straight (conlanging :build t
:type git
:repo "https://labs.phundrak.com/phundrak/conlanging.el")
:after org
:defer t)
Since very recently, the contrib/lisp/ directory of org moved out of
the main repository to this repository. On the other hand,
contrib/scripts/ moved to the worg repository, but I don’t need
it. The main reason I want org-contrib is due to ox-extra that allow
the usage of the :ignore: tag in org.
(use-package org-contrib
:after (org)
:defer t
:straight (:build t)
:init
(require 'ox-extra)
(ox-extras-activate '(latex-header-blocks ignore-headlines)))Agenda
(setq-default org-agenda-files (list "~/org/agenda" "~/org/notes.org"))Babel
One of the amazing features of org-mode is its literary programming capacities by running code blocks from within Org-mode itself. But for that, only a couple of languages are supported directly by Org-mode itself, and they need to be activated. Here are the languages I activated in my Org-mode configuration:
| C |
| emacs-lisp |
| gnuplot |
| latex |
| makefile |
| sass |
| shell |
'((C . t) (emacs-lisp . t) (gnuplot . t) (latex . t) (makefile . t) (sass . t) (shell . t))
The corresponding code is as follows:
(org-babel-do-load-languages
'org-babel-load-languages
<<org-babel-languages-gen()>>)
A package I use from time to time is ob-latex-as-png which allows me
to easily convert a LaTeX snippet into a PNG, regardless of the
exporter I use afterwards. Its installation is pretty simple:
(use-package ob-latex-as-png
:after org
:straight (:build t))(use-package ob-restclient
:straight (:build t)
:defer t
:after (org ob)
:init
(add-to-list 'org-babel-load-languages '(restclient . t)))Behavior
A useful package I like is toc-org which creates automatically a table
of contents. My main usage for this however is not just to create a
table of content of my files to quickly jump around my file (I have
counsel-org-goto for that), but it is for creating table of contents
for org files that will be hosted and viewable on Github.
(use-package toc-org
:after (org markdown-mode)
:straight (:build t)
:init
(add-to-list 'org-tag-alist '("TOC" . ?T))
:hook (org-mode . toc-org-enable)
:hook (markdown-mode . toc-org-enable))
electric-mode also bothers me a lot when editing org files, so let’s deactivate it:
(add-hook 'org-mode-hook (lambda ()
(interactive)
(electric-indent-local-mode -1)))As explained in my blog post, org-mode is terrible with coming up with meaningful IDs for its headings. I actually wrote a package for this!
(use-package org-unique-id
:straight (org-unique-id :build t
:type git
:host github
:repo "Phundrak/org-unique-id")
:defer t
:after org
:init
(add-hook 'org-mode-hook
(lambda ()
(add-hook 'before-save-hook
(lambda ()
(when (and (eq major-mode 'org-mode)
(eq buffer-read-only nil))
(org-unique-id)))))))Capture
Org capture is an amazing tool for taking quick notes, be it simple text, links, resources, or reminders. They are all organised is specified org files which are described below.
(defvar org-conlanging-file "~/org/conlanging.org")
(defvar org-notes-file "~/org/notes.org")
(defvar org-journal-file "~/org/journal.org")
(defvar org-linguistics-file "~/org/linguistics.org")
(defvar org-novel-file "~/org/novel.org")
(defvar org-agenda-file "~/org/agenda/private.org")
(defvar org-school-file "~/org/agenda/school.org")
(defvar org-worldbuilding-file "~/org/worldbuilding.org")Let me describe a keybind to invoke org-capture from anywhere within Emacs.
(phundrak/leader-key
:packages 'org
:infix "o"
"" '(:ignore t :which-key "org")
"c" #'org-capture)
When org-capture is invoked, it will ask which template we wish to
use. In the table /phundrak/dotfiles/src/commit/0e76b9f06e8850ffab328282b87154fc6975fbff/org/config/org-capture-shortcuts-table, the key column
represents which keychord we need to hit, titled with name, we need to
hit in order to use the template, inserted in the designated file in
the manner described by insertion mode.
| Shortcut | Name | Title | Insertion mode | file | template |
|---|---|---|---|---|---|
| e | |||||
| ew | Write Email | Emails | file+headline | org-default-notes-file | email.orgcaptmpl |
| j | Journal | file+datetree | org-journal-file | journal.orgcaptmpl | |
| l | Link | ||||
| ll | General | file+headline | org-default-notes-file | link.orgcaptmpl | |
| ly | YouTube | file+headline | org-default-notes-file | youtube.orgcaptmpl | |
| L | Protocol Link | Link | file+headline | org-default-notes-file | protocol-link.orgcaptmpl |
| n | Notes | ||||
| nc | Conlanging | Note | file+headline | org-conlanging-file | notes.orgcaptmpl |
| nn | General | file+headline | org-default-notes-file | notes.orgcaptmpl | |
| nN | Novel | Note | file+headline | org-novel-notes-file | notes.orgcaptmpl |
| nq | Quote | file+headline | org-default-notes-file | notes-quote.orgcaptmpl | |
| nw | Worldbuilding | Note | file+headline | org-wordbuilding-file | notes.orgcaptmpl |
| N | Novel | ||||
| Ni | Ideas | file+headline | org-novel-notes-file | notes.orgcaptmpl | |
| p | Protocol | Link | file+headline | org-default-notes-file | protocol.orgcaptmpl |
| r | Resources | ||||
| rc | Conlanging | Resources | file+headline | org-conlanging-file | resource.orgcaptmpl |
| re | Emacs | file+headline | org-default-notes-file | resource.orgcaptmpl | |
| ri | Informatique | file+headline | org-default-notes-file | resource.orgcaptmpl | |
| rl | Linguistics | file+headline | org-default-notes-file | resource.orgcaptmpl | |
| rL | Linux | file+headline | org-default-notes-file | resource.orgcaptmpl | |
| rw | Worldbuilding | Resources | file+headline | org-wordbuilding-file | resource.orgcaptmpl |
| t | Tasks | ||||
| tb | Birthday | file+headline | org-private-agenda-file | birthday.orgcaptmpl | |
| te | Event | file+headline | org-private-agenda-file | event.orgcaptmpl | |
| th | Health | file+headline | org-private-agenda-file | health.orgcaptmpl | |
| ti | Informatique | file+headline | org-private-agenda-file | informatique.orgcaptmpl |
All templates can be found in my dotfiles’ repository.
(mapconcat (lambda (entry)
(let ((key (nth 0 entry))
(name (nth 1 entry))
(title (nth 2 entry))
(ins-mode (nth 3 entry))
(file (nth 4 entry))
(template (nth 5 entry)))
(if (string= "" ins-mode)
(format "%S" `(,key ,name))
(format "(\"%s\" \"%s\" entry\n %S\n %S)"
key name
`(,(intern ins-mode) ,(intern file) ,(if (string= "file+datetree" ins-mode)
(intern "")
(if (string= title "")
name
title)))
`(file ,(concat "~/org/capture/" template))))))
entries
"\n")("e" "Email")
("ew" "Write Email" entry
(file+headline org-default-notes-file "Emails")
(file "~/org/capture/email.orgcaptmpl"))
("j" "Journal" entry
(file+datetree org-journal-file ##)
(file "~/org/capture/journal.orgcaptmpl"))
("l" "Link")
("ll" "General" entry
(file+headline org-default-notes-file "General")
(file "~/org/capture/link.orgcaptmpl"))
("ly" "YouTube" entry
(file+headline org-default-notes-file "YouTube")
(file "~/org/capture/youtube.orgcaptmpl"))
("L" "Protocol Link" entry
(file+headline org-default-notes-file "Link")
(file "~/org/capture/protocol-link.orgcaptmpl"))
("n" "Notes")
("nc" "Conlanging" entry
(file+headline org-conlanging-file "Note")
(file "~/org/capture/notes.orgcaptmpl"))
("nn" "General" entry
(file+headline org-default-notes-file "General")
(file "~/org/capture/notes.orgcaptmpl"))
("nN" "Novel" entry
(file+headline org-novel-notes-file "Note")
(file "~/org/capture/notes.orgcaptmpl"))
("nq" "Quote" entry
(file+headline org-default-notes-file "Quote")
(file "~/org/capture/notes-quote.orgcaptmpl"))
("nw" "Worldbuilding" entry
(file+headline org-wordbuilding-file "Note")
(file "~/org/capture/notes.orgcaptmpl"))
("N" "Novel")
("Ni" "Ideas" entry
(file+headline org-novel-notes-file "Ideas")
(file "~/org/capture/notes.orgcaptmpl"))
("p" "Protocol" entry
(file+headline org-default-notes-file "Link")
(file "~/org/capture/protocol.orgcaptmpl"))
("r" "Resources")
("rc" "Conlanging" entry
(file+headline org-conlanging-file "Resources")
(file "~/org/capture/resource.orgcaptmpl"))
("re" "Emacs" entry
(file+headline org-default-notes-file "Emacs")
(file "~/org/capture/resource.orgcaptmpl"))
("ri" "Informatique" entry
(file+headline org-default-notes-file "Informatique")
(file "~/org/capture/resource.orgcaptmpl"))
("rl" "Linguistics" entry
(file+headline org-default-notes-file "Linguistics")
(file "~/org/capture/resource.orgcaptmpl"))
("rL" "Linux" entry
(file+headline org-default-notes-file "Linux")
(file "~/org/capture/resource.orgcaptmpl"))
("rw" "Worldbuilding" entry
(file+headline org-wordbuilding-file "Resources")
(file "~/org/capture/resource.orgcaptmpl"))
("t" "Tasks")
("tb" "Birthday" entry
(file+headline org-private-agenda-file "Birthday")
(file "~/org/capture/birthday.orgcaptmpl"))
("te" "Event" entry
(file+headline org-private-agenda-file "Event")
(file "~/org/capture/event.orgcaptmpl"))
("th" "Health" entry
(file+headline org-private-agenda-file "Health")
(file "~/org/capture/health.orgcaptmpl"))
("ti" "Informatique" entry
(file+headline org-private-agenda-file "Informatique")
(file "~/org/capture/informatique.orgcaptmpl"))
The capture templates are set like so:
(setq org-capture-templates
'(
<<org-capture-shortcuts-gen()>>))Exporters
I want to disable by default behavior of ^ and _ for only one
character, making it compulsory to use instead ^{} and _{}
respectively. This is due to my frequent usage of the underscore in my
org files as a regular character and not a markup one, especially when
describing phonetics evolution. So, let’s disable it:
(setq org-use-sub-superscripts (quote {}))Epub
A backend for exporting files through org I like is ox-epub which, as
you can guess, exports org files to the Epub format.
(use-package ox-epub
:after (org ox)
:straight (:build t))HTML
On HTML exports, Org-mode tries to include a validation link for the exported HTML. Let’s disable that since I never use it.
(setq org-html-validation-link nil);; (use-package htmlize
;; :defer t
;; :straight (:build t))This package allows for live-previewing the HTML export of an org buffer in an XWidget Webkit browser window. But when testing it, it’s not great for large org files, I should keep its usage for smaller org files.
(use-package preview-org-html-mode
:defer t
:after (org)
:straight (preview-org-html-mode :build t
:type git
:host github
:repo "jakebox/preview-org-html-mode")
:general
(phundrak/major-leader-key
:keymaps 'org-mode-map
:packages 'preview-org-html-mode
:infix "P"
"" '(:ignore t :which-key "preview")
"h" #'preview-org-html-mode
"r" #'preview-org-html-refresh
"p" #'preview-org-html-pop-window-to-frame)
:config
(setq preview-org-html-refresh-configuration 'save))Hugo
I manage my blog with Hugo. Although it natively supports the org format, it’s not great compared to its markdown support. So, instead, let’s directly export our org files as markdown files and let Hugo do the rest of the job for us!
(use-package ox-hugo
:defer t
:after ox
:straight t)
I also have a function for publishing my blog once I exported my
articles with ox-hugo. It will compile blog into a public/ directory
and copy its content over to my remote server.
(defun phundrak/blog-publish ()
"Publish my blog through Hugo to my remote server."
(interactive)
(let* ((default-directory (expand-file-name "~/org/blog"))
(public-path (concat default-directory "/public"))
(target-path "/rsync:Tilo:/home/phundrak/www/phundrak.com/blog"))
(compile "hugo")
(let ((files (mapcar (lambda (file)
(f-relative file public-path))
(f-files public-path nil t))))
(dolist (file files)
(copy-file (concat public-path "/" file)
(concat target-path "/" file)
t nil t)))))LaTeX
When it comes to exports, I want the LaTeX and PDF exports to be done with XeLaTeX only. This implies the modification of the following variable:
(setq org-latex-compiler "xelatex")
I also want to get by default minted for LaTeX listings so I can have
syntax highlights:
(setq org-latex-listings 'minted)
The default packages break my LaTeX exports: for some reasons, images
are not loaded and exported in PDFs, so I needed to redifine the
default packages excluding the one that broke my exports; namely, I
need to remove inputenc, fontenc and grffile. I also added some default
packages:
mintedfor syntax highlightingclevereffor better references to various elements.svgfor inserting SVG files in PDF outputsbooktabsfor nicer tables- and
tabularxfor tabulars with adjustable columns
(dolist (package '(("AUTO" "inputenc" t ("pdflatex"))
("T1" "fontenc" t ("pdflatex"))
("" "grffile" t)))
(delete package org-latex-default-packages-alist))
(dolist (package '(("" "minted")
("capitalize" "cleveref")
("" "svg")
("" "booktabs")
("" "tabularx")))
(add-to-list 'org-latex-default-packages-alist package t))
(setq org-latex-reference-command "\\cref{%s}")
By the way, reference links in LaTeX should be written in this format,
since we are using cleveref:
(setq org-export-latex-hyperref-format "\\ref{%s}")And Minted should be default break lines if a line is too long:
(setq org-latex-minted-options '(("breaklines")
("tabsize" "2")
("frame" "single")
("autogobble")))When it comes to the export itself, the latex file needs to be processed several times through XeLaTeX in order to get some references right. Don’t forget to also run bibtex!
(setq org-latex-pdf-process
'("xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"
"bibtex %b"
"xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"
"xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f"))Finally, org-mode is supposed to automatically clean logfiles after it exports an org file to LaTeX. However, it misses a few, so I need to add their extension like so:
(dolist (ext '("bbl" "lot"))
(add-to-list 'org-latex-logfiles-extensions ext t))Reveal.js
(use-package org-re-reveal
:defer t
:after org
:straight (:build t)
:init
(add-hook 'org-mode-hook (lambda () (require 'org-re-reveal)))
:config
(setq org-re-reveal-root "https://cdn.jsdelivr.net/npm/reveal.js"
org-re-reveal-revealjs-version "4"))SSH Config
Yet another exporter I enjoy is ox-ssh with which I manage my
$HOME/.ssh/config file. You won’t find my org file for managing my
servers on my repos though.
(use-package ox-ssh
:after (ox org)
:straight (:build t))Keybindings
Be prepared, I have a lot of keybindings for org-mode! They are all
prefixed with a comma , in normal mode.
| Key chord | Function | Description |
|---|---|---|
| RET | org-ctrl-c-ret | |
| * | org-ctrl-c-star | |
| , | org-ctrl-c-ctrl-c | |
| ' | org-edit-special | |
| - | org-ctrl-c-minus | |
| a | org-agenda | |
| c | org-capture | |
| e | org-export-dispatch | |
| l | org-store-link | |
| p | org-priority | |
| r | org-reload |
I then have a couple of babel-related functions.
| Key chord | Function | Description |
|---|---|---|
| b | nil | babel |
| b. | org-babel-transient/body | |
| bb | org-babel-execute-buffer | |
| bc | org-babel-check-src-block | |
| bC | org-babel-tangle-clean | |
| be | org-babel-execute-maybe | |
| bf | org-babel-tangle-file | |
| bn | org-babel-next-src-block | |
| bo | org-babel-open-src-block-result | |
| bp | org-babel-previous-src-block | |
| br | org-babel-remove-result-one-or-many | |
| bR | org-babel-goto-named-result | |
| bt | org-babel-tangle | |
| bi | org-babel-view-src-block-info |
The org-babel-transient hydra allows me to quickly navigate between
code blocks and interact with them. This code block was inspired by
one you can find in Spacemacs.
(defhydra org-babel-transient ()
"
^Navigate^ ^Interact
^^^^^^^^^^^------------------------------------------
[_t_/_s_] navigate src blocs [_x_] execute src block
[_g_]^^ goto named block [_'_] edit src block
[_z_]^^ recenter screen [_q_] quit
"
("q" nil :exit t)
("t" org-babel-next-src-block)
("s" org-babel-previous-src-block)
("g" org-babel-goto-named-src-block)
("z" recenter-top-bottom)
("x" org-babel-execute-maybe)
("'" org-edit-special :exit t))We next have keybindings related to org-mode’s agenda capabilities. We can schedule a todo header for some dates, or set a deadline.
| Key chord | Function | Description |
|---|---|---|
| d | nil | dates |
| dd | org-deadline | |
| ds | org-schedule | |
| dt | org-time-stamp | |
| dT | org-time-stamp-inactive |
Let’s now define some keybinds for inserting stuff in our org buffer:
| Key chord | Function | Description |
|---|---|---|
| i | nil | insert |
| ib | org-insert-structure-template | |
| id | org-insert-drawer | |
| ie | org-set-effort | |
| if | org-footnote-new | |
| ih | org-insert-heading | |
| iH | counsel-org-link | |
| ii | org-insert-item | |
| il | org-insert-link | |
| in | org-add-note | |
| ip | org-set-property | |
| is | org-insert-subheading | |
| it | org-set-tags-command |
There isn’t a lot of stuff I can jump to yet, but there’s still some:
| Key chord | Function | Description |
|---|---|---|
| j | nil | jump |
| ja | counsel-org-goto-all | |
| jh | counsel-org-goto |
Tables get a bit more love:
| Key chord | Function | Description |
|---|---|---|
| t | nil | tables |
| tc | org-table-move-column-left | |
| tt | org-table-move-row-down | |
| ts | org-table-move-row-up | |
| tr | org-table-move-column-right | |
| ta | org-table-align | |
| te | org-table-eval-formula | |
| tf | org-table-field-info | |
| th | org-table-convert | |
| tl | org-table-recalculate | |
| tp | org-plot/gnuplot | |
| tS | org-table-sort-lines | |
| tw | org-table-wrap-region | |
| tx | org-table-shrink | |
| tN | org-table-create-with-table.el | |
| td | nil | delete |
| tdc | org-table-delete-column | |
| tdr | org-table-kill-row | |
| ti | nil | insert |
| tic | org-table-insert-column | |
| tih | org-table-insert-hline | |
| tir | org-table-insert-row | |
| tiH | org-table-hline-and-move | |
| tt | nil | toggle |
| ttf | org-table-toggle-formula-debugger | |
| tto | org-table-toggle-coordinate-overlays |
Finally, let’s make enabling and disabling stuff accessible:
| Key chord | Function | Description |
|---|---|---|
| T | nil | toggle |
| Tc | org-toggle-checkbox | |
| Ti | org-toggle-inline-images | |
| Tl | org-latex-preview | |
| Tn | org-num-mode | |
| Ts | phundrak/toggle-org-src-window-split | |
| Tt | org-show-todo-tree | |
| TT | org-todo |
LaTeX formats
I currently have two custom formats for my Org-mode exports: one for general use
(initialy for my conlanging files, hence its conlang name), and one for beamer
exports.
Below is the declaration of the conlang LaTeX class:
'("conlang"
"\\documentclass{book}"
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
And here is the declaration of the beamer class:
`("beamer"
,(concat "\\documentclass[presentation]{beamer}\n"
"[DEFAULT-PACKAGES]"
"[PACKAGES]"
"[EXTRA]\n")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
Both these classes have to be added to org-latex-classes like so:
(eval-after-load "ox-latex"
'(progn
(add-to-list 'org-latex-classes
<<org-latex-class-conlang>>)
(add-to-list 'org-latex-classes
<<org-latex-class-beamer>>)))Projects
Another great features of Org-mode is the Org projects that allow the user to easily publish a bunch of org files to a remote location. Here is the current declaration of my projects, which will be detailed later:
<<org-proj-config-setup>>
<<org-proj-lang-setup>>
(setq org-publish-project-alist
`(
<<org-proj-config-html>>
<<org-proj-config-static>>
<<org-proj-config>>
<<org-proj-lang-html>>
<<org-proj-lang-pdf>>
<<org-proj-lang-static>>
<<org-proj-lang>>))Configuration website
This is my configuration for exporting my dotfiles to my website in a web format only. No PDFs or anything, just HTML. Please note that I do not use that often anymore, I much prefer the automatic script that I have which deploys through my Drone instance my website on git pushes.
And before we get into the actual configuration, I would like to introduce a couple of variables. This is a bit more verbose than if I declared everything manually, but now I can change all three values at the same time without a hasle.
(defvar phundrak//projects-config-target
"/ssh:Tilo:~/www/phundrak.com/config"
"Points to where exported files for config.phundrak.com should be put.")
(defvar phundrak//projects-config-source
"~/org/config/"
"Points to where the sources for config.phundrak.com are.")
(defvar phundrak//projects-config-language
"en"
"Language of the website config.phundrak.com.")
(defvar phundrak//projects-config-recursive
t
"Defines whether subdirectories should be parsed for config.phundrak.com.")Now, here is my configuration. In this snippet, my org files located in my source directory get exported in the HTML format and published to my target directory on my remote server through RSYNC via TRAMP. A sitemap is automatically generated, which comes in handy with the online sitemap that is available through the navigation bar.
("config-website-org"
:base-directory ,phundrak//projects-config-source
:base-extension "org"
:publishing-directory ,phundrak//projects-config-target
:recursive ,phundrak//projects-config-recursive
:language ,phundrak//projects-config-language
:publishing-function org-html-publish-to-html
:headline-levels 5
:auto-sitemap t
:auto-preamble t)We also have the component for all the static files needed to run the website (mostly images tbh).
("config-website-static"
:base-directory ,phundrak//projects-config-source
:base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub\\|md"
:publishing-directory ,phundrak//projects-config-target
:recursive ,phundrak//projects-config-recursive
:language ,phundrak//projects-config-language
:publishing-function org-publish-attachment)The project is then defined like so:
("config-website"
:components ("config-website-org"
"config-website-static"))Linguistics website
My linguistics website is made out of three projects. As for the previous project, let’s declare the common values for these.
(defvar phundrak//projects-conlanging-target
"/ssh:Tilo:~/www/phundrak.com/langue/"
"Points to where exported files for langue.phundrak.com should be put")
(defvar phundrak//projects-conlanging-source
"~/Documents/conlanging/content/"
"Points to where the sources for langue.phundrak.com are")
(defvar phundrak//projects-conlanging-language
"fr"
"Language of langue.phundrak.com")
(defvar phundrak//projects-conlanging-recursive
t
"Defines whether subdirectories should be parsed for langue.phundrak.com")The first component is the one generating the HTML files from the org files.
("langue-phundrak-com-org"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "org"
:exclude "\\./\\(CONTRIB\\|README\\|head\\|temp\\|svg-ink\\).*"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-html-publish-to-html
:headline-levels 5
:auto-sitemap t
:auto-preamble t)We also have the component for the LaTeX and PDF part of the website:
("langue-phundrak-com-pdf"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "org"
:exclude "\\./\\(CONTRIB\\|README\\|index\\|head\\|temp\\|svg-ink\\).*"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-latex-publish-to-pdf
:headline-levels 5
:auto-preamble t)And lastly, we have the component for all the static files needed to run the website:
("langue-phundrak-com-static"
:base-directory ,phundrak//projects-conlanging-source
:base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub"
:publishing-directory ,phundrak//projects-conlanging-target
:recursive ,phundrak//projects-conlanging-recursive
:language ,phundrak//projects-conlanging-language
:publishing-function org-publish-attachment)The project is then defined like so:
("langue-phundrak-com"
:components ("langue-phundrak-com-org"
"langue-phundrak-com-static"
"langue-phundrak-com-pdf"))Org-ref and Bibtex configuration
(use-package reftex
:commands turn-on-reftex
:init (setq reftex-default-bibliography "~/org/bibliography/references.bib"
reftex-plug-into-AUCTeX t))(use-package org-ref
;; :after (org ox-bibtex pdf-tools)
:after org
:defer t
:straight (:build t)
:custom-face
(org-ref-cite-face ((t (:weight bold))))
:init
(setq org-ref-completion-library 'org-ref-ivy-cite
org-latex-logfiles-extensions '("lof" "lot" "aux" "idx" "out" "log" "fbd_latexmk"
"toc" "nav" "snm" "vrb" "dvi" "blg" "brf" "bflsb"
"entoc" "ps" "spl" "bbl" "pygtex" "pygstyle"))
(add-hook 'org-mode-hook (lambda () (require 'org-ref)))
:config
(setq bibtex-completion-pdf-field "file"
bibtex-completion-notes-path "~/org/bibliography/notes/"
bibtex-completion-bibliography "~/org/bibliography/references.bib"
bibtex-completion-library-path "~/org/bibliography/bibtex-pdfs/"
bibtex-completion-pdf-symbol "⌘"
bibtex-completion-notes-symbol "✎")
:general
(phundrak/evil
:keymaps 'bibtex-mode-map
:packages 'org-ref
"C-t" #'org-ref-bibtex-next-entry
"C-s" #'org-ref-bibtex-previous-entry
"gt" #'org-ref-bibtex-next-entry
"gs" #'org-ref-bibtex-previous-entry)
(phundrak/major-leader-key
:keymaps '(bibtex-mode-map)
:packages 'org-ref
;; Navigation
"t" #'org-ref-bibtex-next-entry
"s" #'org-ref-bibtex-previous-entry
;; Open
"b" #'org-ref-open-in-browser
"n" #'org-ref-open-bibtex-notes
"p" #'org-ref-open-bibtex-pdf
;; Misc
"h" #'org-ref-bibtex-hydra/body
"i" #'org-ref-bibtex-hydra/org-ref-bibtex-new-entry/body-and-exit
"s" #'org-ref-sort-bibtex-entry
"l" '(:ignore t :which-key "lookup")
"la" #'arxiv-add-bibtex-entry
"lA" #'arxiv-get-pdf-add-bibtex-entry
"ld" #'doi-utils-add-bibtex-entry-from-doi
"li" #'isbn-to-bibtex
"lp" #'pubmed-insert-bibtex-from-pmid)
(phundrak/major-leader-key
:keymaps 'org-mode-map
:pakages 'org-ref
"ic" #'org-ref-insert-link))(use-package ivy-bibtex
:defer t
:straight (:build t)
:config
(setq bibtex-completion-pdf-open-function #'find-file)
:general
(phundrak/leader-key
:keymaps '(bibtex-mode-map)
:packages 'ivy-bibtex
"m" #'ivy-bibtex))(after! org
(require 'org-ref))Org-present
org-present allows its user to create presentations through org-mode,
which is really nice! However, most of my configuration will be stolen
from Daviwil’s with minor changes.
(defun my/org-present-prepare-slide ()
(org-overview)
(org-show-entry)
(org-show-children)
(org-present-hide-cursor))
(defun my/org-present-init ()
(setq header-line-format " ")
(org-display-inline-images)
(my/org-present-prepare-slide))
(defun my/org-present-quit ()
(setq header-line-format nil)
(org-present-small)
(org-present-show-cursor))
(defun my/org-present-prev ()
(interactive)
(org-present-prev)
(my/org-present-prepare-slide))
(defun my/org-present-next ()
(interactive)
(org-present-next)
(my/org-present-prepare-slide))
(use-package org-present
:after org
:defer t
:straight (:build t)
:general
(phundrak/major-leader-key
:packages 'org-present
:keymaps 'org-mode-map
"p" #'org-present)
(phundrak/evil
:states 'normal
:packages 'org-present
:keymaps 'org-present-mode-keymap
"+" #'org-present-big
"-" #'org-present-small
"<" #'org-present-beginning
">" #'org-present-end
"«" #'org-present-beginning
"»" #'org-present-end
"c" #'org-present-hide-cursor
"C" #'org-present-show-cursor
"n" #'org-present-next
"p" #'org-present-prev
"r" #'org-present-read-only
"w" #'org-present-read-write
"q" #'org-present-quit)
:hook ((org-present-mode . my/org-present-init)
(org-present-mode-quit . my/org-present-quit)))Visual Configuration
While most modes of Emacs are dedicated to development, and therefore
are much more comfortable with a fixed-pitch font, more literary modes
such as org-mode are much more enjoyable if you have a variable pitch
font enabled. BUT, these modes can also require some fixed-pitch fonts
for some elements of the buffer, such as code blocks with
org-mode. mixed-pitch comes to the rescue!
(use-package mixed-pitch
:after org
:straight (:build t)
:hook
(org-mode . mixed-pitch-mode)
(emms-browser-mode . mixed-pitch-mode)
(emms-playlist-mode . mixed-pitch-mode)
:config
(add-hook 'org-agenda-mode-hook (lambda () (mixed-pitch-mode -1))))
With this, I also use org-pretty-tables in order to use some
capabilities of Unicode in order to make tables nicer to look at.
(use-package org-pretty-table
:defer t
:after org
:straight (org-pretty-table :type git
:host github
:repo "Fuco1/org-pretty-table"
:build t)
:hook (org-mode . org-pretty-table-mode)
:commands (org-pretty-table-mode global-org-pretty-table-mode))
I have an issue with org-mode’s emphasis markers: I find them ugly. I
can of course hide them if I simply set org-hide-emphasis-markers to
t, but it makes editing hard since I never know whether I am before or
after the emphasis marker when editing near the beginning/end of an
emphasized region. org-appear fixes this issue so that it shows the
emphasis markers only when the cursor is in the emphasized region,
otherwise they will remain hidden! Very cool!
(use-package org-appear
:after org
:straight (:build t)
:hook (org-mode . org-appear-mode)
:config
(setq org-appear-autoemphasis t
org-hide-emphasis-markers t
org-appear-autolinks t
org-appear-autoentities t
org-appear-autosubmarkers t)
(run-at-time nil nil #'org-appear--set-elements))Similarly, LaTeX fragments previews are nice and all, but if I have my cursor on it, I want to see the LaTeX source code and modify it, not just the generated image!
(use-package org-fragtog
:defer t
:after org
:straight (:build t)
:hook (org-mode . org-fragtog-mode))
Tired of seeing lots of actual stars * in your headers, and you want a
fancier remplacement? Or you are still using org-bullets but just
found out how out-of-date and abandoned it is? (Last commit was on
September 18th, 2014… damn…) Search no more, org-superstar will take
care of that for you!
(use-package org-superstar
:after org
:straight (:build t)
:hook (org-mode . org-superstar-mode)
:config
(setq org-superstar-leading-bullet ?\s
org-superstar-leading-fallback ?\s
org-hide-leading-stars nil
org-superstar-todo-bullet-alist
'(("TODO" . 9744)
("[ ]" . 9744)
("DONE" . 9745)
("[X]" . 9745))))
org-fancy-priorities change the priority of an org element such such
as #A to anything user-defined. Let’s make this anything all-the-icons
icons!
(use-package org-fancy-priorities
:after (org all-the-icons)
:straight (:build t)
:hook (org-mode . org-fancy-priorities-mode)
:hook (org-agenda-mode . org-fancy-priorities-mode)
:config
(setq org-fancy-priorities-list `(,(all-the-icons-faicon "flag" :height 1.1 :v-adjust 0.0)
,(all-the-icons-faicon "arrow-up" :height 1.1 :v-adjust 0.0)
,(all-the-icons-faicon "square" :height 1.1 :v-adjust 0.0))))Org Outline Tree is a better way of managing my org files’ outline.
(use-package org-ol-tree
:after (org avy)
:defer t
:straight (org-ol-tree :build t
:host github
:type git
:repo "Townk/org-ol-tree")
:general
(phundrak/major-leader-key
:packages 'org-ol-tree
:keymaps 'org-mode-map
"O" #'org-ol-tree))(add-hook 'org-mode-hook
(lambda ()
(dolist (pair '(("[ ]" . ?☐)
("[X]" . ?☑)
("[-]" . ?❍)
("#+title:" . ?📕)
("#+TITLE:" . ?📕)
("#+author:" . ?✎)
("#+AUTHOR:" . ?✎)
("#+email:" . ?📧)
("#+EMAIL:" . ?📧)
("#+include" . ?⭳)
("#+INCLUDE" . ?⭳)
("#+begin_src" . ?λ)
("#+BEGIN_SRC" . ?λ)
("#+end_src" . ?λ)
("#+END_SRC" . ?λ)))
(add-to-list 'prettify-symbols-alist pair))
(prettify-symbols-mode)))Misc
org-tree-slide is a presentation tool for org-mode.
(use-package org-tree-slide
:defer t
:after org
:straight (:build t)
:config
(setq org-tree-slide-skip-done nil)
:general
(phundrak/evil
:keymaps 'org-mode-map
:packages 'org-tree-slide
"<f8>" #'org-tree-slide-mode)
(phundrak/major-leader-key
:keymaps 'org-tree-slide-mode-map
:packages 'org-tree-slide
"d" (lambda () (interactive (setq org-tree-slide-skip-done (not org-tree-slide-skip-done))))
"p" #'org-tree-slide-move-next-tree
"n" #'org-tree-slide-move-previous-tree
"t" #'org-tree-slide-move-next-tree
"s" #'org-tree-slide-move-previous-tree
"u" #'org-tree-slide-content))Programming languages
Tools
Flycheck
(use-package flycheck
:straight (:build t)
:defer t
:init
(global-flycheck-mode)
:config
(setq flycheck-emacs-lisp-load-path 'inherit)
;; Rerunning checks on every newline is a mote excessive.
(delq 'new-line flycheck-check-syntax-automatically)
;; And don’t recheck on idle as often
(setq flycheck-idle-change-delay 2.0)
;; For the above functionality, check syntax in a buffer that you
;; switched to on briefly. This allows “refreshing” the syntax check
;; state for several buffers quickly after e.g. changing a config
;; file.
(setq flycheck-buffer-switch-check-intermediate-buffers t)
;; Display errors a little quicker (default is 0.9s)
(setq flycheck-display-errors-delay 0.2))
(use-package flycheck-popup-tip
:straight (:build t)
:after flycheck
:hook (flycheck-mode . flycheck-popup-tip-mode)
:config
(setq flycheck-popup-tip-error-prefix "X ")
(after! evil
(add-hook 'evil-insert-state-entry-hook
#'flycheck-popup-tip-delete-popup)
(add-hook 'evil-replace-state-entry-hook
#'flycheck-popup-tip-delete-popup)))
(use-package flycheck-posframe
:straight (:build t)
:hook (flycheck-mode . flycheck-posframe-mode)
:config
(setq flycheck-posframe-warning-prefix "! "
flycheck-posframe-info-prefix "··· "
flycheck-posframe-error-prefix "X "))Langtool
(use-package langtool
:defer t
:straight (:build t)
:commands (langtool-check
langtool-check-done
langtool-show-message-at-point
langtool-correct-buffer)
:init
(setq langtool-default-language "en-US")
:config
(setq langtool-java-classpath "/usr/share/languagetool:/usr/share/java/languagetool/*"))(use-package writegood-mode
:defer t
:straight (:build t)
:hook org-mode latex-mode
:general
(phundrak/major-leader-key
:keymaps 'writegood-mode-map
"g" #'writegood-grade-level
"r" #'writegood-reading-ease))Spellcheck
(use-package ispell
:defer t
:straight (:type built-in)
:config
(add-to-list 'ispell-skip-region-alist '(":\\(PROPERTIES\\|LOGBOOK\\):" . ":END:"))
(add-to-list 'ispell-skip-region-alist '("#\\+BEGIN_SRC" . "#\\+END_SRC"))
(add-to-list 'ispell-skip-region-alist '("#\\+BEGIN_EXAMPLE" . "#\\+END_EXAMPLE"))
(setq ispell-program-name "aspell"
ispell-extra-args '("--sug-mode=ultra" "--run-together")
ispell-aspell-dict-dir (ispell-get-aspell-config-value "dict-dir")
ispell-aspell-data-dir (ispell-get-aspell-config-value "data-dir")
ispell-personal-dictionary (expand-file-name (concat "ispell/" ispell-dictionary ".pws")
user-emacs-directory)))(use-package flyspell
:defer t
:straight (:type built-in)
:ghook 'org-mode 'markdown-mode 'TeX-mode
:init
(defhydra flyspell-hydra ()
"
Spell Commands^^ Add To Dictionary^^ Other
--------------^^---------- -----------------^^------------- -----^^---------------------------
[_b_] check whole buffer [_B_] add word to dict (buffer) [_t_] toggle spell check
[_r_] check region [_G_] add word to dict (global) [_q_] exit
[_d_] change dictionary [_S_] add word to dict (session) [_Q_] exit and disable spell check
[_n_] next error
[_c_] correct before point
[_s_] correct at point"
("B" nil)
("b" flyspell-buffer)
("r" flyspell-region)
("d" nil)
("G" nil)
("n" flyspell-goto-next-error)
("c" flyspell-correct-wrapper)
("Q" flyspell-mode :exit t)
("q" nil :exit t)
("S" nil)
("s" flyspell-correct-at-point)
("t" nil))
:config
(provide 'ispell) ;; force loading ispell
(setq flyspell-issue-welcome-flag nil
flyspell-issue-message-flag nil))(use-package flyspell-correct
:defer t
:straight (:build t)
:general ([remap ispell-word] #'flyspell-correct-at-point)
:config
(require 'flyspell-correct-ivy nil t))
(use-package flyspell-correct-ivy
:defer t
:straight (:build t)
:after flyspell-correct)(use-package flyspell-lazy
:defer t
:straight (:build t)
:after flyspell
:config
(setq flyspell-lazy-idle-seconds 1
flyspell-lazy-window-idle-seconds 3)
(flyspell-lazy-mode +1))LSP-Mode
lsp-mode is a mode for Emacs which implements the Language Server
Protocol and offers Emacs an IDE-like experience. In short, it’s
awesome!
(use-package lsp-mode
:defer t
:straight (:build t)
:init
(setq lsp-keymap-prefix "C-c l")
:hook ((c-mode . lsp-deferred)
(c++-mode . lsp-deferred)
(html-mode . lsp-deferred)
(lsp-mode . lsp-enable-which-key-integration)
(lsp-mode . lsp-ui-mode))
:commands (lsp lsp-deferred)
:custom
(lsp-rust-analyzer-cargo-watch-command "clippy")
(lsp-eldoc-render-all t)
(lsp-idle-delay 0.6)
(lsp-rust-analyzer-server-display-inlay-hints t))I also want all the visual enhancements LSP can provide.
(use-package lsp-ui
:after lsp
:defer t
:straight (:build t)
:commands lsp-ui-mode
:custom
(lsp-ui-peek-always-show t)
(lsp-ui-sideline-show-hover t)
(lsp-ui-doc-enable t)
:general
(phundrak/major-leader-key
:keymaps 'lsp-ui-peek-mode-map
:packages 'lsp-ui
"c" #'lsp-ui-pook--select-prev-file
"t" #'lsp-ui-pook--select-next
"s" #'lsp-ui-pook--select-prev
"r" #'lsp-ui-pook--select-next-file))
And let’s enable some intergration with ivy.
(use-package lsp-ivy
:straight (:build t)
:defer t
:after lsp
:commands lsp-ivy-workspace-symbol)(use-package lsp-treemacs
:defer t
:straight (:build t)
:requires treemacs)| Key | Function | Description |
|---|---|---|
| treemacs | ||
| c | create | |
| cd | treemacs-create-dir | |
| cf | treemacs-create-file | |
| ci | treemacs-create-icon | |
| ct | treemacs-create-theme | |
| cw | treemacs-create-workspace | |
| d | treemacs-delete-file | |
| f | files | |
| ff | treemacs-find-file | |
| ft | treemacs-find-tag | |
| l | lsp | |
| ls | treemacs-expand-lsp-symbol | |
| ld | treemacs-expand-lsp-treemacs-deps | |
| lD | treemacs-collapse-lsp-treemacs-deps | |
| lS | treemacs-collapse-lsp-symbol | |
| p | projects | |
| pa | treemacs-add-project | |
| pf | treemacs-project-follow-mode | |
| pn | treemacs-project-of-node | |
| pp | treemacs-project-at-point | |
| pr | treemacs-remove-project-from-workspace | |
| pt | treemacs-move-project-down | |
| ps | treemacs-move-project-up | |
| r | rename | |
| rf | treemacs-rename-file | |
| rp | treemacs-rename-project | |
| rr | treemacs-rename | |
| rw | treemacs-rename-workspace | |
| t | treemacs | |
| T | toggles | |
| Td | treemacs-toggle-show-dotfiles | |
| Tn | treemacs-toggle-node | |
| v | visit node | |
| va | treemacs-visit-node-ace | |
| vc | treemacs-visit-node-close-treemacs | |
| vn | treemacs-visit-node-default | |
| y | yank | |
| ya | treemacs-copy-absolute-path-at-point | |
| yp | treemacs-copy-project-path-at-point | |
| yr | treemacs-copy-relative-path-at-point | |
| yf | treemacs-copy-file |
(use-package exec-path-from-shell
:defer t
:straight (:build t)
:init (exec-path-from-shell-initialize))(use-package consult-lsp
:defer t
:after lsp
:straight (:build t)
:general
(phundrak/evil
:keymaps 'lsp-mode-map
[remap xref-find-apropos] #'consult-lsp-symbols))
dap-mode is an advanced debugging mode that works through lsp.
(use-package dap-mode
:after lsp
:defer t
:straight (:build t)
:config
(dap-ui-mode)
(dap-ui-controls-mode 1)
(require 'dap-lldb)
(require 'dap-gdb-lldb)
(dap-gdb-lldb-setup)
(dap-register-debug-template
"Rust::LLDB Run Configuration"
(list :type "lldb"
:request "launch"
:name "LLDB::Run"
:gdbpath "rust-lldb"
:target nil
:cwd nil)))DSLs
DSLs, or Domain Specific Languages, are languages dedicated to some very tasks, such as configuration languages or non-general programming such as SQL.
Caddy
Caddy (or Caddyserver) is a web server akin to Nginx or Apache which I find much easier to configure that the latter two, plus it has built-in support for automatically generating SSL certificates with Letsencrypt! Automatic HTTPS, what more do you want?
All that is nice and all, but Emacs doesn’t support the syntax of
Caddy files natively, so let’s install caddyfile-mode:
(use-package caddyfile-mode
:defer t
:straight (:build t)
:mode (("Caddyfile\\'" . caddyfile-mode)
("caddy\\.conf\\'" . caddyfile-mode)))CMake
CMake is one of the standard tools for indicating how a project should be built. It is not as standard as some other tools such as automake, autoconfig, and the likes, but still pretty standard. CMake however doesn’t have a major mode available by default, so let’s provide one.
(use-package cmake-mode
:defer t
:straight (:build t))Let’s enable first some autocompletion for it.
(use-package company-cmake
:straight (company-cmake :build t
:type git
:host github
:repo "purcell/company-cmake")
:after cmake-mode
:defer t)And let’s also enable a more advanced CMake fontlock.
(use-package cmake-font-lock
:defer t
:after cmake-mode
:straight (:build t))And finally, let’s enable some Eldoc integration for CMake.
(use-package eldoc-cmake
:straight (:build t)
:defer t
:after cmake-mode)CSV
(use-package csv-mode
:straight (:build t)
:defer t
:general
(phundrak/major-leader-key
:keymaps 'csv-mode-map
"a" #'csv-align-fields
"d" #'csv-kill-fields
"h" #'csv-header-line
"i" #'csv-toggle-invisibility
"n" #'csv-forward-field
"p" #'csv-backward-field
"r" #'csv-reverse-region
"s" '(:ignore t :wk "sort")
"sf" #'csv-sort-fields
"sn" #'csv-sort-numeric-fields
"so" #'csv-toggle-descending
"t" #'csv-transpose
"u" #'csv-unalign-fields
"y" '(:ignore t :wk yank)
"yf" #'csv-yank-fields
"yt" #'csv-yank-as-new-table))Gnuplot
This package is a front-end and major mode for the programming language Gnuplot. Let’s make some beautiful graphs, shall we?
(use-package gnuplot
:straight (:build t)
:defer t)Graphviz
Graphviz, often known with dot, allows to programatically create
visual graphs and networks.
(use-package graphviz-dot-mode
:defer t
:straight (:build t)
:after ob
:mode (("\\.diag\\'" . graphviz-dot-mode)
("\\.blockdiag\\'" . graphviz-dot-mode)
("\\.nwdiag\\'" . graphviz-dot-mode)
("\\.rackdiag\\'" . graphviz-dot-mode)
("\\.dot\\'" . graphviz-dot-mode)
("\\.gv\\'" . graphviz-dot-mode))
:init
(setq graphviz-dot-indent-width tab-width)
(after! ob
(defalias 'org-babel-execute:graphviz-dot #'org-babel-execute:dot)
(add-to-list 'org-babel-load-languages '(dot . t))
(require 'ob-dot)
(setq org-src-lang-modes
(append '(("dot" . graphviz-dot))
(delete '("dot" . fundamental) org-src-lang-modes))))
:general
(phundrak/major-leader-key
:keymaps 'graphviz-dot-mode-map
"=" #'graphviz-dot-indent-graph
"c" #'compile)
:config
(setq graphviz-dot-indent-width 4))Markdown
Yes, I love org-mode and I largely prefer to use it instead of Markdown due to its far superior power and abilities. But still, sometimes I need to use Markdown because not everyone use org-mode, unfortunately.
(use-package markdown-mode
:defer t
:straight t
:mode
(("\\.mkd\\'" . markdown-mode)
("\\.mdk\\'" . markdown-mode)
("\\.mdx\\'" . markdown-mode))
:hook (markdown-mode . orgtbl-mode)
:general
(phundrak/evil
:keymaps 'markdown-mode-map
:packages 'markdown-mode
"M-RET" #'markdown-insert-list-item
"M-c" #'markdown-promote
"M-t" #'markdown-move-down
"M-s" #'markdown-move-up
"M-r" #'markdown-demote)
(phundrak/major-leader-key
:keymaps 'markdown-mode-map
:packages 'markdown-mode
"{" #'markdown-backward-paragraph
"}" #'markdown-forward-paragraph
"]" #'markdown-complete
">" #'markdown-indent-region
"»" #'markdown-indent-region
"<" #'markdown-outdent-region
"«" #'markdown-outdent-region
"n" #'markdown-next-link
"p" #'markdown-previous-link
"f" #'markdown-follow-thing-at-point
"k" #'markdown-kill-thing-at-point
"c" '(:ignore t :which-key "command")
"c]" #'markdown-complete-buffer
"cc" #'markdown-check-refs
"ce" #'markdown-export
"cm" #'markdown-other-window
"cn" #'markdown-cleanup-list-numbers
"co" #'markdown-open
"cp" #'markdown-preview
"cv" #'markdown-export-and-preview
"cw" #'markdown-kill-ring-save
"h" '(:ignore t :which-key "headings")
"hi" #'markdown-insert-header-dwim
"hI" #'markdown-insert-header-setext-dwim
"h1" #'markdown-insert-header-atx-1
"h2" #'markdown-insert-header-atx-2
"h3" #'markdown-insert-header-atx-3
"h4" #'markdown-insert-header-atx-4
"h5" #'markdown-insert-header-atx-5
"h6" #'markdown-insert-header-atx-6
"h!" #'markdown-insert-header-setext-1
"h@" #'markdown-insert-header-setext-2
"i" '(:ignore t :which-key "insert")
"i-" #'markdown-insert-hr
"if" #'markdown-insert-footnote
"ii" #'markdown-insert-image
"il" #'markdown-insert-link
"it" #'markdown-insert-table
"iw" #'markdown-insert-wiki-link
"l" '(:ignore t :which-key "lists")
"li" #'markdown-insert-list-item
"T" '(:ignore t :which-key "toggle")
"Ti" #'markdown-toggle-inline-images
"Tu" #'markdown-toggle-url-hiding
"Tm" #'markdown-toggle-markup-hiding
"Tt" #'markdown-toggle-gfm-checkbox
"Tw" #'markdown-toggle-wiki-links
"t" '(:ignore t :which-key "table")
"tc" #'markdown-table-move-column-left
"tt" #'markdown-table-move-row-down
"ts" #'markdown-table-move-row-up
"tr" #'markdown-table-move-column-right
"ts" #'markdown-table-sort-lines
"tC" #'markdown-table-convert-region
"tt" #'markdown-table-transpose
"td" '(:ignore t :which-key "delete")
"tdc" #'markdown-table-delete-column
"tdr" #'markdown-table-delete-row
"ti" '(:ignore t :which-key "insert")
"tic" #'markdown-table-insert-column
"tir" #'markdown-table-insert-row
"x" '(:ignore t :which-key "text")
"xb" #'markdown-insert-bold
"xB" #'markdown-insert-gfm-checkbox
"xc" #'markdown-insert-code
"xC" #'markdown-insert-gfm-code-block
"xi" #'markdown-insert-italic
"xk" #'markdown-insert-kbd
"xp" #'markdown-insert-pre
"xP" #'markdown-pre-region
"xs" #'markdown-insert-strike-through
"xq" #'markdown-blockquote-region)
:config
(setq markdown-fontify-code-blocks-natively t))Since most of my Mardown files are related to Github, I’d like to be able to render Markdown through its API.
(use-package gh-md
:defer t
:after markdown-mode
:straight (:build t)
:general
(phundrak/major-leader-key
:packages 'gh-md
:keymaps 'markdown-mode-map
"cr" #'gh-md-render-buffer))
Tables of content are always nice to have for large files, just like
with the toc-org package for org-mode.
(use-package markdown-toc
:defer t
:after markdown-mode
:straight (:build t)
:general
(phundrak/major-leader-key
:packages 'markdown-toc
:keymaps 'markdown-mode-map
"iT" #'markdown-toc-generate-toc))
vmd-mode allows the user to live-preview their Github-flavored
Markdown file quickly. That’s neat!
(use-package vmd-mode
:defer t
:after markdown-mode
:straight (:build t)
:custom ((vmd-binary-path (executable-find "vmd")))
:general
(phundrak/major-leader-key
:packages 'vmd-mode
:keymaps 'markdown-mode-map
"cP" #'vmd-mode))Nginx
Nginx is another webserver, older and more mature than Caddy. A couple of packages are required in order to be able to properly work with Nginx configuration files. First, we need the correct mode for editing Nginx configuration files.
(use-package nginx-mode
:straight (:build t)
:defer t)
We then also have an autocompletion package that adds to company the
Nginx syntax.
(use-package company-nginx
:straight (:build t)
:defer t
:config
(add-hook 'nginx-mode-hook (lambda ()
(add-to-list 'company-backends #'company-nginx))))PKGBUILD
As I am an ArchLinux user, I sometimes have to interact with PKGBUILD files, both from the AUR when I want to install something from there or some I write myself.
(use-package pkgbuild-mode
:straight (:build t)
:defer t
:general
(phundrak/major-leader-key
:keymaps 'pkgbuild-mode-map
"c" #'pkgbuild-syntax-check
"i" #'pkgbuild-initialize
"I" #'pkgbuild-increase-release-tag
"m" #'pkgbuild-makepkg
"u" '(:ignore :wk "update")
"us" #'pkgbuild-update-sums-line
"uS" #'pkgbuild-update-srcinfo))PlantUML
(use-package plantuml-mode
:defer t
:straight (:build t)
:mode ("\\.\\(pum\\|puml\\)\\'" . plantuml-mode)
:after ob
:init
(add-to-list 'org-babel-load-languages '(plantuml . t))
:general
(phundrak/major-leader-key
:keymaps 'plantuml-mode-map
:packages 'plantuml-mode
"c" '(:ignore t :which-key "compile")
"cc" #'plantuml-preview
"co" #'plantuml-set-output-type)
:config
(setq plantuml-default-exec-mode 'jar
plantuml-jar-path "~/.local/bin/plantuml.jar"
org-plantuml-jar-path "~/.local/bin/plantuml.jar"))Shells
Aside from Eshell, my main shell on my machine is fish (see my fish config), therefore I need a mode for it.
(use-package fish-mode
:straight (:build t)
:defer t)Toml
(use-package toml-mode
:straight (:build t)
:defer t
:mode "/\\(Cargo.lock\\|\\.cargo/config\\)\\'")Yaml
(use-package yaml-mode
:defer t
:straight (:build t)
:mode "\\.yml\\'"
:mode "\\.yaml\\'")General Programming Languages
C/C++
I know, I know, C and C++ no longer are closely related languages, each one of them went their own way and learning C won’t make you a good C++ programmer, neither will the other way around. But, They are still somewhat related, and Emacs thinks so too.
(use-package cc-mode
:straight (:type built-in)
:defer t
:init
(put 'c-c++-backend 'safe-local-variable 'symbolp)
:config
(require 'compile)
:general
(phundrak/undefine
:keymaps '(c-mode-map c++-mode-map)
";" nil)
(phundrak/major-leader-key
:keymaps '(c-mode-map c++-mode-map)
"l" '(:keymap lsp-command-map :which-key "lsp" :package lsp-mode))
(phundrak/evil
:keymaps '(c-mode-map c++-mode-map)
"ga" #'projectile-find-other-file
"gA" #'projectile-find-other-file-other-window))
Something that is also important when working with these languages is
respecting the .clang-format file that may be provided by a project.
(use-package clang-format+
:straight (:build t)
:defer t
:init
(add-hook 'c-mode-common-hook #'clang-format+-mode))However, Emacs’ notion of C++ is somewhat outdated, so we need to update its fontlock.
(use-package modern-cpp-font-lock
:straight (:build t)
:defer t
:hook (c++-mode . modern-c++-font-lock-mode))CommonLisp
In lisp buffers, let’s enable parinfer-rust-mode.
(add-hook 'lisp-mode-hook #'parinfer-rust-mode)
My current window manager is StumpWM, inspired by Emacs and written in
CommonLisp. stumpwm-mode offers some integration between Emacs and
StumpWM so we can evaluate CLisp code and see its effects in StumpWM
immediately. Since my only use for CommonLisp is for my StumpWM
configuration, it should be automatically enabled when entering
lisp-mode.
(use-package stumpwm-mode
:straight (:build t)
:defer t
:hook lisp-mode
:config
(phundrak/major-leader-key
:keymaps 'stumpwm-mode-map
:packages 'stumpwm-mode
"e" '(:ignore t :which-key "eval")
"ee" #'stumpwm-eval-last-sexp
"ed" #'stumpwm-eval-defun
"er" #'stumpwm-eval-region))Sly enables some deep interactivity between Emacs and a CommonLisp application running the Slynk backend. For an example, see my Sly configuration for StumpWM.
(use-package sly
:defer t
:straight (:build t))Dart
(use-package dart-mode
:straight (:build t)
:defer t
:hook (dart-mode . lsp-deferred)
:mode "\\.dart\\'")(use-package lsp-dart
:straight (:build t)
:defer t)EmacsLisp
This package displays the function’s arglist or variable’s docstring in the echo area at the bottom of the frame. Quite useful indeed.
(use-package eldoc
:defer t
:after company
:init
(eldoc-add-command 'company-complete-selection
'company-complete-common
'company-capf
'company-abort))(add-hook 'emacs-lisp-mode-hook (lambda () (smartparens-mode -1)))Let’s also declare some Elisp-dedicated keybindings, prefixed by a comma.
(phundrak/major-leader-key
:keymaps 'emacs-lisp-mode-map
"'" #'ielm
"c" '(emacs-lisp-byte-compile :which-key "Byte compile")
"C" '(:ignore t :which-key "checkdoc")
"Cc" #'checkdoc
"Cs" #'checkdoc-start
"e" '(:ignore t :which-key "eval")
"eb" #'eval-buffer
"ed" #'eval-defun
"ee" #'eval-last-sexp
"er" #'eval-region
"h" '(:ignore t :which-key "help")
"hh" #'helpful-at-point
"t" '(:ignore t :wk "toggle")
"tP" '(:ignore t :wk "parinfer")
"tPs" #'parinfer-rust-switch-mode
"tPd" #'parinfer-rust-mode-disable
"tPp" #'parinfer-rust-toggle-paren-mode)(use-package package-lint
:defer t
:straight (:build t)
:general
(phundrak/major-leader-key
:keymaps 'emacs-lisp-mode-map
:packages 'package-lint
"l" #'package-lint-current-buffer))Lua
(use-package lua-mode
:defer t
:straight (:build t)
:mode "\\.lua'$"
:interpreter "lua"
:hook (lua-mode . lsp-deferred)
:init
(setq lua-indent-level 2
lua-indent-string-contents t)
:general
(phundrak/major-leader-key
:keymaps 'lua-mode-map
"'" #'lua-show-process-buffer
"h" '(:ignore t :wk "help")
"hd" #'lua-search-documentation
"s" '(:ignore t :wk "REPL")
"sb" #'lua-send-buffer
"sf" #'lua-send-defun
"sl" #'lua-send-current-line
"sr" #'lua-send-region))(use-package lsp-lua-emmy
:defer t
:after (lua-mode lsp-mode)
:straight (lsp-lua-emmy :build t
:type git
:host github
:repo "EmmyLua/EmmyLua-LanguageServer")
:hook (lua-mode . lsp-deferred)
:config
(setq lsp-lua-emmy-jar-path (expand-file-name "EmmyLua-LS-all.jar" user-emacs-directory)))Python
First, we need to set up the main Python mode. With this, we’ll also add Python to the list of LSP languages and to the list of languages org-babel supports.
(use-package python
:defer t
:straight (:build t)
:after ob
:mode (("SConstruct\\'" . python-mode)
("SConscript\\'" . python-mode)
("[./]flake8\\'" . conf-mode)
("/Pipfile\\'" . conf-mode))
:init
(setq python-indent-guess-indent-offset-verbose nil)
(add-hook 'python-mode-local-vars-hook #'lsp)
(add-to-list 'org-babel-load-languages '(python . t))
:config
(setq python-indent-guess-indent-offset-verbose nil)
(when (and (executable-find "python3")
(string= python-shell-interpreter "python"))
(setq python-shell-interpreter "python3")))Now let’s add a package for pytest.
(use-package pytest
:defer t
:straight (:build t)
:commands (pytest-one
pytest-pdb-one
pytest-all
pytest-pdb-all
pytest-last-failed
pytest-pdb-last-failed
pytest-module
pytest-pdb-module)
:config
(add-to-list 'pytest-project-root-files "setup.cfg")
:general
(phundrak/major-leader-key
:keymaps 'python-mode-map
:infix "t"
:packages 'pytest
"" '(:ignore t :which-key "test")
"a" #'python-pytest
"f" #'python-pytest-file-dwim
"F" #'python-pytest-file
"t" #'python-pytest-function-dwim
"T" #'python-pytest-function
"r" #'python-pytest-repeat
"p" #'python-pytest-dispatch))Poetry is a nice tool with which we can manage our Python runtime version as well as our dependencies.
(use-package poetry
:defer t
:straight (:build t)
:commands (poetry-venv-toggle
poetry-tracking-mode)
:config
(setq poetry-tracking-strategy 'switch-buffer)
(add-hook 'python-mode-hook #'poetry-tracking-mode))This package will bring a new major mode for editing pip requirements.
(use-package pip-requirements
:defer t
:straight (:build t))Why use the command line to interact with pip when we can do it with an Emacs frontend?
(use-package pippel
:defer t
:straight (:build t)
:general
(phundrak/major-leader-key
:keymaps 'python-mode-map
:packages 'pippel
"P" #'pippel-list-packages))This is a pipenv porcelain
(use-package pipenv
:defer t
:straight (:build t)
:commands (pipenv-activate
pipenv-deactivate
pipenv-shell
pipenv-open
pipenv-install
pipenv-uninstall)
:hook (python-mode . pipenv-mode)
:init (setq pipenv-with-projectile nil)
:general
(phundrak/major-leader-key
:keymaps 'python-mode-map
:packages 'pipenv
:infix "e"
"" '(:ignore t :which-key "pipenv")
"a" #'pipenv-activate
"d" #'pipenv-deactivate
"i" #'pipenv-install
"l" #'pipenv-lock
"o" #'pipenv-open
"r" #'pipenv-run
"s" #'pipenv-shell
"u" #'pipenv-uninstall))
This integrates pyenv into python-mode.
(use-package pyenv
:defer t
:straight (:build t)
:config
(add-hook 'python-mode-hook #'pyenv-track-virtualenv)
(add-to-list 'global-mode-string
'(pyenv-virtual-env-name (" venv:" pyenv-virtual-env-name " "))
'append))
Let’s also add a mode for pyenv:
(use-package pyenv-mode
:defer t
:after python
:straight (:build t)
:if (executable-find "pyenv")
:commands (pyenv-mode-versions)
:general
(phundrak/major-leader-key
:packages 'pyenv-mode
:keymaps 'python-mode-map
:infix "v"
"u" #'pyenv-mode-unset
"s" #'pyenv-mode-set))This package automatically imports packages we forgot to import.
(use-package pyimport
:defer t
:straight (:build t)
:general
(phundrak/major-leader-key
:packages 'pyimport
:keymaps 'python-mode-map
:infix "i"
"" '(:ignore t :which-key "imports")
"i" #'pyimport-insert-missing
"r" #'pyimport-remove-unused))On the other hand, this one sorts our imports to make them more readable.
(use-package py-isort
:defer t
:straight (:build t)
:general
(phundrak/major-leader-key
:keymaps 'python-mode-map
:packages 'py-isort
:infix "i"
"" '(:ignore t :which-key "imports")
"s" #'py-isort-buffer
"R" #'py-isort-region))Access pydoc through counsel.
(use-package counsel-pydoc
:defer t
:straight (:build t))This generates Python documentation that is meant to be compatible with Sphinx, a documentation generaton for Python.
(use-package sphinx-doc
:defer t
:straight (:build t)
:init
(add-hook 'python-mode-hook #'sphinx-doc-mode)
:general
(phundrak/major-leader-key
:keymaps 'python-mode-map
:packages 'sphinx-doc
:infix "S"
"" '(:ignore t :which-key "sphinx-doc")
"e" #'sphinx-doc-mode
"d" #'sphinx-doc))Cython is a Python to C compiler. It also introduces the extended Cython programming language which makes writing C for Python easier. This package is a major mode for the Cython programming language.
(use-package cython-mode
:defer t
:straight (:build t)
:mode "\\.p\\(yx\\|x[di]\\)\\'"
:config
(setq cython-default-compile-format "cython -a %s")
:general
(phundrak/major-leader-key
:keymaps 'cython-mode-map
:packages 'cython-mode
:infix "c"
"" '(:ignore t :which-key "cython")
"c" #'cython-compile))Flycheck can also be enabled for Cython:
(use-package flycheck-cython
:defer t
:straight (:build t)
:after cython-mode)
Blacken uses the black formatter backend to format Python buffers.
(use-package blacken
:defer t
:straight (:build t)
:init
(add-hook 'python-mode-hook #'blacken-mode))Finally, I’m using Pyright as my LSP backend for Python.
(use-package lsp-pyright
:after lsp-mode
:defer t
:straight (:buidl t))Rust
Rust is a general programming language, akin to C++ in some ways, but
much more oriented towards safe code, and much better suited for web
development. First, let’s install the most important package,
rustic.
(use-package rustic
:defer t
:straight (:build t)
:mode ("\\.rs\\'" . rustic-mode)
:hook (rustic-mode-local-vars . rustic-setup-lsp)
:hook (rustic-mode . lsp-deferred)
:init
(after! org-src
(defalias 'org-babel-execute:rust #'org-babel-execute:rustic)
(add-to-list 'org-src-lang-modes '("rust" . rustic)))
(setq rustic-lsp-client 'lsp-mode)
:general
(general-define-key
:keymaps 'rustic-mode-map
:packages 'lsp
"M-t" #'lsp-ui-imenu
"M-?" #'lsp-find-references)
(phundrak/major-leader-key
:keymaps 'rustic-mode-map
:packages 'rustic
"b" '(:ignore t :which-key "build")
"bb" #'rustic-cargo-build
"bB" #'rustic-cargo-bench
"bc" #'rustic-cargo-check
"bC" #'rustic-cargo-clippy
"bd" #'rustic-cargo-doc
"bf" #'rustic-cargo-fmt
"bn" #'rustic-cargo-new
"bo" #'rustic-cargo-outdated
"br" #'rustic-cargo-run
"l" '(:ignore t :which-key "lsp")
"la" #'lsp-execute-code-action
"lr" #'lsp-rename
"lq" #'lsp-workspace-restart
"lQ" #'lsp-workspace-shutdown
"ls" #'lsp-rust-analyzer-status
"t" '(:ignore t :which-key "cargo test")
"ta" #'rustic-cargo-test
"tt" #'rustic-cargo-current-test)
:config
(setq rustic-indent-method-chain t
rustic-babel-format-src-block nil
rustic-format-trigger nil)
(remove-hook 'rustic-mode-hook #'flycheck-mode)
(remove-hook 'rustic-mode-hook #'flymake-mode-off)
(remove-hook 'rustic-mode-hook #'rustic-setup-lsp))Web programming
Emmet is a powerful templating engine that can generate through simple CSS-like expression some HTML so you don’t have to write everything by hand.
(use-package emmet-mode
:straight (:build t)
:defer t
:hook ((css-mode . emmet-mode)
(html-mode . emmet-mode)
(web-mode . emmet-mode)
(sass-mode . emmet-mode)
(scss-mode . emmet-mode)
(web-mode . emmet-mode))
:config
(general-define-key
:keymaps 'emmet-mode-keymap
"C-RET" #'emmet-expand-yas))Impatient mode serves web buffers live over HTTP so you can see your editions as you type them.
(use-package impatient-mode
:straight (:build t)
:defer t)Web mode is a sort of hybrid major mode that allows editing several languages in the same buffer, mainly HTML, CSS, and Javascript.
(use-package web-mode
:defer t
:straight (:build t)
:hook ((html-mode . web-mode))
:mode (("\\.phtml\\'" . web-mode)
("\\.tpl\\.php\\'" . web-mode)
("\\.twig\\'" . web-mode)
("\\.xml\\'" . web-mode)
("\\.html\\'" . web-mode)
("\\.htm\\'" . web-mode)
("\\.[gj]sp\\'" . web-mode)
("\\.as[cp]x?\\'" . web-mode)
("\\.eex\\'" . web-mode)
("\\.erb\\'" . web-mode)
("\\.mustache\\'" . web-mode)
("\\.handlebars\\'" . web-mode)
("\\.hbs\\'" . web-mode)
("\\.eco\\'" . web-mode)
("\\.ejs\\'" . web-mode)
("\\.svelte\\'" . web-mode)
("\\.ctp\\'" . web-mode)
("\\.djhtml\\'" . web-mode))
:general
(phundrak/major-leader-key
:keymaps 'web-mode-map
:packages 'web-mode
"=" '(:ignore t :which-key "format")
"E" '(:ignore t :which-key "errors")
"El" #'web-mode-dom-errors-show
"gb" #'web-mode-element-beginning
"g" '(:ignore t :which-key "goto")
"gc" #'web-mode-element-child
"gp" #'web-mode-element-parent
"gs" #'web-mode-element-sibling-next
"h" '(:ignore t :which-key "dom")
"hp" #'web-mode-dom-xpath
"r" '(:ignore t :which-key "refactor")
"rc" #'web-mode-element-clone
"rd" #'web-mode-element-vanish
"rk" #'web-mode-element-kill
"rr" #'web-mode-element-rename
"rw" #'web-mode-element-wrap
"z" #'web-mode-fold-or-unfold))
Auto-completion for emmet-mode, html-mode, and web-mode.
(use-package company-web
:defer t
:straight (:build t)
:after (emmet-mode web-mode))CSS
Let’s customize a bit the built-in CSS mode.
(use-package css-mode
:defer t
:straight (:type built-in)
:hook (css-mode . smartparens-mode)
:hook (css-mode . lsp-deferred)
:init
(put 'css-indent-offset 'safe-local-variable #'integerp)
:general
(phundrak/major-leader-key
:keymaps 'css-mode-map
:packages 'css-mode
"=" '(:ignore :wk "format")
"g" '(:ignore :wk "goto")))SCSS is much nicer to use than pure CSS in my opinion, so let’s add a mode for that.
(use-package scss-mode
:straight (:build t)
:hook (scss-mode . smartparens-mode)
:hook (scss-mode . lsp-deferred)
:defer t
:mode "\\.scss\\'")And let’s add some autocompletion for CSS.
(use-package counsel-css
:straight (:build t)
:defer t
:init
(cl-loop for (mode-map . mode-hook) in '((css-mode-map . css-mode-hook)
(scss-mode-map . scss-mode-hook))
do (add-hook mode-hook #'counsel-css-imenu-setup)
(phundrak/major-leader-key
:keymaps mode-map
"gh" #'counsel-css)))Javascript
javascript-mode is meh at best, while rjsx-mode (Real JSX) is much
better: it supports both Javascript and .jsx files for React and
Next.JS.
(use-package rjsx-mode
:defer t
:straight (:build t)
:after compile
:mode "\\.[mc]?js\\'"
:mode "\\.es6\\'"
:mode "\\.pac\\'"
:interpreter "node"
:hook (rjsx-mode . rainbow-delimiters-mode)
:hook (rjsx-mode . lsp-deferred)
:init
(add-to-list 'compilation-error-regexp-alist 'node)
(add-to-list 'compilation-error-regexp-alist-alist
'(node "^[[:blank:]]*at \\(.*(\\|\\)\\(.+?\\):\\([[:digit:]]+\\):\\([[:digit:]]+\\)"
2 3 4))
:general
(phundrak/major-leader-key
:keymaps 'rjsx-mode-map
:infix "a"
"" '(:keymap lsp-command-map :which-key "lsp")
"=" '(:ignore t :wk "format")
"a" '(:ignore t :which-key "actions"))
:config
(setq js-chain-indent t
js2-basic-offset 2
;; ignore shebangs
js2-skip-preprocessor-directives t
;; Flycheck handles this already
js2-mode-show-parse-errors nil
js2-mode-show-strict-warnings nil
;; conflicting with eslint, Flycheck already handles this
js2-strict-missing-semi-warning nil
js2-highlight-level 3
js2-idle-timer-delay 0.15))
js2-refactor is an amazing tool for refactoring Javascript code. I
mean, look at this! And the video is only from 2013 and it still
receives some commits!
(use-package js2-refactor
:defer t
:straight (:build t)
:after (js2-mode rjsx-mode)
:hook (js2-mode . js2-refactor-mode)
:hook (rjsx-mode . js2-refactor-mode))Which Emacser prefers the command line over Emacs itself? I don’t. Let’s interact with NPM through Emacs then.
(use-package npm-mode
:defer t
:straight (:build t)
:hook (js-mode . npm-mode)
:general
(phundrak/major-leader-key
:packages '(npm-mode rjsx-mode)
:keymaps 'rjsx-mode-map
"n" '(:keymap npm-mode-command-keymap :which-key "npm")))And finally, here is a formatter for Javascript.
(use-package prettier-js
:defer t
:straight (:build t)
:hook (rjsx-mode . prettier-js-mode))Typescript
Typescript is a safer alternative to Javascript. Let’s install its major mode then.
(use-package typescript-mode
:defer t
:straight (:build t)
:hook (typescript-mode . rainbow-delimiters-mode)
:hook (typescript-mode . lsp-deferred)
:hook (typescript-tsx-mode . rainbow-delimiters-mode)
:hook (typescript-tsx-mode . lsp-deferred)
:commands typescript-tsx-mode
:after flycheck
:init
(add-to-list 'auto-mode-alist '("\\.tsx\\'" . typescript-tsx-mode))
:general
(phundrak/major-leader-key
:packages 'lsp
:keymaps '(typescript-mode-map typescript-tsx-mode-map)
:infix "a"
"" '(:keymap lsp-command-map :which-key "lsp")
"=" '(:ignore t :wk "format")
"a" '(:ignore t :which-key "actions"))
(phundrak/major-leader-key
:packages 'typescript-mode
:keymaps '(typescript-mode-map typescript-tsx-mode-map)
"n" '(:keymap npm-mode-command-keymap :which-key "npm"))
:config
(after! flycheck
(flycheck-add-mode 'javascript-eslint 'web-mode)
(flycheck-add-mode 'javascript-eslint 'typescript-mode)
(flycheck-add-mode 'javascript-eslint 'typescript-tsx-mode)
(flycheck-add-mode 'typescript-tslint 'typescript-tsx-mode))
(when (fboundp 'web-mode)
(define-derived-mode typescript-tsx-mode web-mode "TypeScript-TSX"))
(autoload 'js2-line-break "js2-mode" nil t))Tide enabled interactivity with Typescript.
(use-package tide
:defer t
:straight (:build t)
:hook (tide-mode . tide-hl-identifier-mode)
:config
(setq tide-completion-detailed t
tide-always-show-documentation t
tide-server-may-response-length 524288
tide-completion-setup-company-backend nil)
(advice-add #'tide-setup :after #'eldoc-mode)
:general
(phundrak/major-leader-key
:keymaps 'tide-mode-map
"R" #'tide-restart-server
"f" #'tide-format
"rrs" #'tide-rename-symbol
"roi" #'tide-organize-imports))Visual Configuration
Dashboard
(use-package dashboard
:straight (:build t)
:ensure t
:after all-the-icons
:config
(setq dashboard-banner-logo-title "Phundrak’s Vanilla Emacs"
dashboard-startup-banner 'logo
dashboard-center-content t
dashboard-show-shortcuts t
dashboard-set-navigator t
dashboard-set-heading-icons t
dashboard-set-file-icons t
initial-buffer-choice (lambda () (get-buffer "*dashboard*"))
dashboard-projects-switch-function 'counsel-projectile-switch-project-by-name)
(setq dashboard-navigator-buttons
`(((,(all-the-icons-faicon "language" :height 1.1 :v-adjust 0.0)
"Linguistics Website"
""
(lambda (&rest _) (browse-url "https://langue.phundrak.com")))
(,(all-the-icons-faicon "firefox" :height 1.1 :v-adjust 0.0)
"Config Website"
""
(lambda (&rest _) (browse-url "https://config.phundrak.com"))))
((,(all-the-icons-octicon "git-branch" :height 1.1 :v-adjust 0.0)
"Dotfiles Sources"
""
(lambda (&rest _) (browse-url "https://labs.phundrak.com/phundrak/dotfiles")))
("!" "Issues" "Show issues" (lambda (&rest _)
(browse-url "https://labs.phundrak.com/phundrak/dotfiles/issues"))
warning))
((,(all-the-icons-faicon "level-up" :height 1.1 :v-adjust 0.0)
"Update Packages"
""
(lambda (&rest _) (progn
(require 'straight)
(straight-pull-all)
(straight-rebuild-all)))))))
(setq dashboard-items '((recents . 15)
(projects . 10)))
(dashboard-setup-startup-hook)
:init
(add-hook 'after-init-hook 'dashboard-refresh-buffer))Fringe
It’s nice to know which lines were modified since the last commit in a file.
(use-package git-gutter-fringe
:straight (:build t)
:hook ((prog-mode . git-gutter-mode)
(org-mode . git-gutter-mode)
(markdown-mode . git-gutter-mode)
(latex-mode . git-gutter-mode)))Icons? Did someone say icons?
YES! ALL OF THEM!
Ahem…
The package all-the-icons allows us to use a wide variety of icons in
Emacs for various purposes, wherever we want, and THAT is GREAT! I’ll
(ab)use this feature in my config, be warned! NOTE: The first time a
configuration with all-the-icons loads on a machine, the needed fonts
might not be available, so you’ll need to install them with the
command M-x all-the-icons-install-fonts.
(use-package all-the-icons
:defer t
:straight t)
prettify-symbols-mode is also a nifty feature of Emacs, and it is
built-in! With that, I can replace strings of my choice by another
character of my choice! First, let’s declare the general symbols that
will be used everywhere.
(defun prog-mode-set-symbols-alist ()
(setq prettify-symbols-alist '(("lambda" . ?λ)
("return" . ?⮐)
("null" . ?∅)
("NULL" . ?∅)
("for" . ?∀)
("in" . ?∈)
("and" . ?∧)
("&&" . ?∧)
("or" . ?∨)
("||" . ?∨)
("xor" . ?⊻)))
(prettify-symbols-mode 1))
(add-hook 'prog-mode-hook #'prog-mode-set-symbols-alist)We can now take care of the language-specific symbols. First, let’s declare some symbols for the Lisp languages.
(setq-default lisp-prettify-symbols-alist '(("lambda" . ?λ)
("mapc" . ?↦)
("defun" . ?𝑓)
("defvar" . ?𝑣)
("defcustom" . ?𝑐)
("defconst" . ?𝐶)
("not" . ?!)
("pi" . ?π)))
(defun lisp-mode-prettify ()
(setq prettify-symbols-alist lisp-prettify-symbols-alist)
(prettify-symbols-mode -1)
(prettify-symbols-mode 1))
(dolist (lang '(emacs-lisp lisp common-lisp scheme))
(add-hook (intern (format "%S-mode-hook" lang))
#'lisp-mode-prettify))Let’s declare also some for Rust:
(defun rust-mode-pretty-symbols ()
(push '("fn" . ?𝑓) prettify-symbols-alist)
(push '("struct" . ?Λ) prettify-symbols-alist)
(prettify-symbols-mode -1)
(prettify-symbols-mode 1))
(add-hook 'rustic-mode-hook #'rust-mode-pretty-symbols)And some for C and C++.
(defun c-cpp-mode-pretty-symbols ()
(push '("int" . ?ℤ) prettify-symbols-alist)
(push '("float" . ?ℝ) prettify-symbols-alist)
(push '("#include" . ?⭳) prettify-symbols-alist)
(push '("struct" . ?Λ) prettify-symbols-alist)
(prettify-symbols-mode -1)
(prettify-symbols-mode 1))
(add-hook 'c-mode-hook #'c-cpp-mode-pretty-symbols)
(add-hook 'c++-mode-hook #'c-cpp-mode-pretty-symbols)
Finally, similar to how org-appear behaves, let’s show the real string
of our symbols when the cursor is on it.
(setq prettify-symbols-unprettify-at-point t)Ligatures
The font I’m using (see §#Basic-configuration-Visual-Configuration-Fontsxfkjel6184j0) supports ligatures, but Emacs in GUI mode does not. And of course, there’s a package for that.
(use-package ligature
:straight (ligature :type git
:host github
:repo "mickeynp/ligature.el"
:build t)
:config
(ligature-set-ligatures 't
'("www"))
;; Enable traditional ligature support in eww-mode, if the
;; `variable-pitch' face supports it
(ligature-set-ligatures '(eww-mode org-mode elfeed-show-mode)
'("ff" "fi" "ffi"))
;; Enable all Cascadia Code ligatures in programming modes
(ligature-set-ligatures 'prog-mode
'("|||>" "<|||" "<==>" "<!--" "####" "~~>" "***" "||=" "||>"
":::" "::=" "=:=" "===" "==>" "=!=" "=>>" "=<<" "=/=" "!=="
"!!." ">=>" ">>=" ">>>" ">>-" ">->" "->>" "-->" "---" "-<<"
"<~~" "<~>" "<*>" "<||" "<|>" "<$>" "<==" "<=>" "<=<" "<->"
"<--" "<-<" "<<=" "<<-" "<<<" "<+>" "</>" "###" "#_(" "..<"
"..." "+++" "/==" "///" "_|_" "www" "&&" "^=" "~~" "~@" "~="
"~>" "~-" "**" "*>" "*/" "||" "|}" "|]" "|=" "|>" "|-" "{|"
"[|" "]#" "::" ":=" ":>" ":<" "$>" "==" "=>" "!=" "!!" ">:"
">=" ">>" ">-" "-~" "-|" "->" "--" "-<" "<~" "<*" "<|" "<:"
"<$" "<=" "<>" "<-" "<<" "<+" "</" "#{" "#[" "#:" "#=" "#!"
"##" "#(" "#?" "#_" "%%" ".=" ".-" ".." ".?" "+>" "++" "?:"
"?=" "?." "??" ";;" "/*" "/=" "/>" "//" "__" "~~" "(*" "*)"
"\\\\" "://"))
(global-ligature-mode t))Modeline
The DoomEmacs modeline looks nice in my opinion, let’s use it.
(use-package doom-modeline
:straight (:build t)
:defer t
:init (doom-modeline-mode 1)
:custom ((doom-modeline-height 15)))Secret mode
Sometimes, I want to hide the text displayed by Emacs but not lock
altogether my computer. In this case, secret-mode comes in handy.
(use-package secret-mode
:defer t
:straight (secret-mode :build t
:type git
:host github
:repo "bkaestner/secret-mode.el"))Solaire: Incandescent Emacs
A common issue when you have a lot of windows opened in Emacs is
sometimes there’s just too much. Is the first window source code? Is
the other one just an open email? Oh, let’s not forget the *Messages*
buffer open next to another source buffer.
Solaire-mode applies a subtle but useful tweak to your current color scheme: the background of programming buffers is slightly lighter than the background of other buffers. (Or is it other buffers that have a slightly darker background? I’m not sure.)
(use-package solaire-mode
:defer t
:straight (:build t)
:init (solaire-global-mode +1))Theme
You may have noticed I use the Nord theme pretty much everywhere on my computer, why not Emacs?
(use-package doom-themes
:straight (:build t)
:defer t
:init (load-theme 'doom-nord t))Rainbow Delimiters
This makes Lisp especially more readable, but it’s also nice to have for any language that has delimiters like brackets too.
(use-package rainbow-delimiters
:straight (:build t)
:defer t
:hook (prog-mode . rainbow-delimiters-mode))Y’all want some more COLORS?
It is possible to make info buffers much more colorful (and imo easier to read) with this simple package:
(use-package info-colors
:straight (:build t)
:commands info-colors-fnontify-node
:hook (Info-selection . info-colors-fontify-node)
:hook (Info-mode . mixed-pitch-mode))Misc
ArchWiki pages
A small package I’ve written allows the user to view ArchLinux pages either in Emacs or in an external web browser. I prefer the defaults.
(use-package archwiki
:defer t
:straight (archwiki :build t
:type git
:repo "https://labs.phundrak.com/phundrak/archwiki.el"))
avy
avy is a really convenient way of jumping around, but I’ll need some
configuration to make it bépo-compatible.
(use-package avy
:defer t
:straight t
:config
(setq avy-keys '(?a ?u ?i ?e ?c ?t ?s ?r ?n))
:general
(phundrak/evil
:packages 'avy
"gl" #'avy-goto-line))Calc
Let’s give calc-mode some better defaults.
(setq calc-angle-mode 'rad
calc-symbolic-mode t)Elcord
What’s the point of using Emacs if you can’t tell everyone?
(use-package elcord
:straight (:built t)
:defer t
:config
(setq elcord-use-major-mode-as-main-icon t
elcord-refresh-rate 5
elcord-display-elapsed nil)
(add-to-list 'elcord-boring-buffers-regexp-list ".*window-managers.*"))
ivy-quick-find-files.el
This package is a small utility package I’ve written in order to quickly find files across my filesystem.
(use-package ivy-quick-find-files
:defer t
:straight (ivy-quick-find-files :type git
:host github
:repo "phundrak/ivy-quick-find-files.el"
:build t)
:config
(setq ivy-quick-find-files-program 'fd
ivy-quick-find-files-dirs-and-exts '(("~/org" . "org")
("~/Documents/conlanging" . "org")
("~/Documents/university" . "org"))))Keycast
In case I am sharing my screen with people and I want to show which functions are called on my keystrokes since I don’t exactly use standard keybindings.
(use-package keycast
:defer t
:straight (:build t)
:config
(define-minor-mode keycast-mode
"Show current command and its key binding in the mode line."
:global t
(if keycast-mode
(add-hook 'pre-command-hook 'keycast--update t)
(remove-hook 'pre-command-hook 'keycast--update)))
(add-to-list 'global-mode-string '("" mode-line-keycast " ")))SICP
Who would get interested in Emacs and not want to read the SICP? Moreover, inside Emacs?
(use-package sicp
:straight (:build t)
:defer t)Winum
Winum allows Emacs to associate windows with a specific number and navigate through these windows by directly refering to their associated number! This allows for faster window configuration than just going to the frame above, then left, left, and up.
(use-package winum
:straight (:build t)
:init (winum-mode))Ytplay
ytplay is a small package I’ve written with which you can choose at
which resolution to play a YouTube video in an external video player.
(use-package ytplay
:defer t
:straight (ytplay :build t
:type git
:repo "https://labs.phundrak.com/phundrak/ytplay.el"))Keybindings
Undefining some stuff to make keybind prefixes work correctly.
(general-define-key
:keymaps 'global-map
"<mouse-2>" nil
"<mouse-3>" nil)
(phundrak/evil
"U" #'evil-redo
"C-a" #'beginning-of-line
"C-e" #'end-of-line
"C-y" #'yank)(phundrak/leader-key
"SPC" '(counsel-M-x :wk "M-x")
"'" #'shell-pop
<<general-keybindings-gen(table=keybinds-apps, prefix="a")>>
<<general-keybindings-gen(table=keybinds-apps-shell, prefix="as")>>
<<general-keybindings-gen(table=treemacs-keybinds, prefix="at")>>
<<general-keybindings-gen(table=keybinds-buffers, prefix="b")>>
"c" '(:ignore t :wk "code")
"cl" #'evilnc-comment-or-uncomment-lines
<<keybindings-flycheck>>
<<general-keybindings-gen(table=keybinds-files, prefix="f")>>
<<keybinds-specific-files>>
<<general-keybindings-gen(table=keybinds-help, prefix="h")>>
"i" '(:ignore t :wk "insert")
"iu" #'counsel-unicode-char
<<general-keybindings-gen(table=keybinds-jump, prefix="j")>>
<<general-keybindings-gen(table=keybinds-project, prefix="p")>>
<<general-keybindings-gen(table=keybinds-toggle, prefix="t")>>
<<general-keybindings-gen(table=keybinds-text, prefix="T")>>
<<general-keybindings-gen(table=keybinds-project, prefix="p")>>
<<general-keybindings-gen(table=keybinds-windows, prefix="w")>>
<<general-keybindings-gen(table=keybinds-quit, prefix="q")>>
"u" #'universal-argument
"U" #'undo-tree-visualize)Apps
Here are my apps keybinds. Each one of them is prefixed by a.
| Key | Function | Description |
|---|---|---|
| apps | ||
| c | calc | |
| d | docker | |
| E | elfeed | |
| e | ||
| ec | mu4e-compose-new | |
| em | mu4e | |
| k | keycast-mode | |
| K | keycast-log-mode | |
| T | tetris | |
| w | wttrin | |
| C | calendar |
I also have two main shell-related functions, prefixed with as.
| Key | Function | Description |
|---|---|---|
| shells | ||
| e | eshell-new | |
| v | vterm |
Buffers
My buffer-related keybinds are all prefixed by b.
| Key | Function | Description |
|---|---|---|
| buffers | ||
| b | bufler-switch-buffer | |
| B | bury-buffer | |
| l | bufler | |
| d | kill-this-buffer | |
| D | kill-buffer | |
| h | dashboard-refresh-buffer | |
| m | switch-to-messages-buffer | |
| r | counsel-buffer-or-recentf | |
| s | switch-to-scratch-buffer |
Errors
(defhydra hydra-flycheck
(:pre (flycheck-list-errors)
:post (quit-windows-on "*Flycheck errors*")
:hint nil)
("f" flycheck-error-list-set-filter "Filter")
("t" flycheck-next-error "Next")
("s" flycheck-previous-error "Previous")
("gg" flycheck-first-error "First")
("G" (progn (goto-char (point-max)) (flycheck-previous-error)) "Last")
("q" nil))"e" '(:ignore t :which-key "errors")
"e." '(hydra-flycheck/body :wk "hydra")
"el" #'counsel-flycheck
"ee" '(:keymap flycheck-command-map :wk "flycheck")Files
My keybinds for file manipulation are prefixed by f.
| Key | Function | Description |
|---|---|---|
| files | ||
| f | counsel-find-file | |
| F | ivy-quick-find-files | |
| h | hexl-find-file | |
| r | counsel-recentf | |
| s | save-buffer |
I also have some keybinds dedicated to opening specific files.
"fc" '((lambda ()
(interactive)
(find-file "~/org/config/emacs.org"))
:wk "emacs.org")
"fi" '((lambda ()
(interactive)
(find-file (concat user-emacs-directory "init.el")))
:which-key "init.el")
"fS" '((lambda ()
(interactive)
(find-file "~/org/config/stumpwm.org"))
:which-key "stumpwm.org")Help
My keybinds for help are prefixed by h.
| Key | Function | Description |
|---|---|---|
| help | ||
| k | which-key-show-top-level | |
| i | info | |
| I | info-display-manual | |
| d | describe | |
| dc | describe-char | |
| dC | helpful-command | |
| df | helpful-callable | |
| di | describe-input-method | |
| dk | helpful-key | |
| dm | helpful-macro | |
| dM | helpful-mode | |
| dp | describe-package | |
| ds | helpful-symbol | |
| dv | helpful-variable |
Jump
My keybinds for jumping around are prefixed by j.
| Key | Function | Description |
|---|---|---|
| jump | ||
| c | counsel-dired-jump | |
| f | counsel-file-jump | |
| d | dired-jump | |
| D | dired-jump-other-window |
Project
My keybinds for my projects are prefixed by p.
| Key | Function | Description |
|---|---|---|
| project | ||
| ! | projectile-run-shell-command-in-root | |
| & | projectile-run-async-shell-command-in-root | |
| b | counsel-projectile-switch-to-buffer | |
| c | counsel-projectile | |
| d | counsel-projectile-find-dir | |
| e | projectile-edit-dir-locals | |
| f | counsel-projectile-find-file | |
| g | projectile-find-tag | |
| k | project-kill-buffers | |
| p | counsel-projectile-switch-project | |
| t | ivy-magit-todos | |
| v | projectile-vc |
Text
The prefix here is T.
| Key | Function | Description |
|---|---|---|
| text | ||
| e | string-edit-at-point | |
| u | downcase-region | |
| U | upcase-region | |
| z | hydra-zoom/body |
Toggles
My toggle keybinds are prefixed by t.
| Key | Function | Description |
|---|---|---|
| toggles | ||
| t | counsel-load-theme | |
| d | debug | |
| de | toggle-debug-on-error | |
| dq | toggle-debug-on-quit | |
| i | input method | |
| it | toggle-input-method | |
| is | set-input-mode |
Windows
A couple of keybinds are hidden from which-key, otherwise there’s not
much to say. The prefix here is w.
| Key | Function | Description |
|---|---|---|
| windows | ||
| c | evil-window-left | |
| t | evil-window-down | |
| s | evil-window-up | |
| r | evil-window-right | |
| . | windows-adjust-size/body | |
| - | split-window-below-and-focus | |
| / | split-window-right-and-focus | |
| $ | winum-select-window-by-number | |
| 0 | winum-select-window-0-or-10 | none |
| 1 | winum-select-window-1 | none |
| 2 | winum-select-window-2 | none |
| 3 | winum-select-window-3 | none |
| 4 | winum-select-window-4 | none |
| 5 | winum-select-window-5 | none |
| 6 | winum-select-window-6 | none |
| 7 | winum-select-window-7 | none |
| 8 | winum-select-window-8 | none |
| 9 | winum-select-window-9 | none |
| b | kill-buffer-and-delete-window | |
| d | delete-window | |
| o | other-window | |
| D | delete-other-windows | |
| w | writeroom | |
| w. | writeroom-buffer-width/body | |
| ww | writeroom-mode |
Quit
Why would I ever use any of these keybinds? They are prefixed with q.
| Key | Function | Description |
|---|---|---|
| quit | ||
| f | delete-frame | |
| q | save-buffers-kill-terminal | |
| Q | kill-emacs |