Phundrak’s Emacs Configuration

#+title: Emacs Configuration #+setupfile: headers #+OPTIONS: auto-id:t #+HTML_HEAD_EXTRA: #+HTML_HEAD_EXTRA: #+HTML_HEAD_EXTRA: #+PROPERTY: header-args: :mkdirp yes :lexical t * Introduction :PROPERTIES: :CUSTOM_ID: Introduction-f1cbb8bb :END: This file is the main source file for my Emacs configuration which contains most of the user code. It is exported thanks to Emacs’ code tangling from the original Org file which you can find on my dotfiles’ repository[fn:1] if you are reading the web version of it. You can also find there my ~.spacemacs~[fn:2] and its code which isn’t part of the present file. As you can see in my ~.spacemacs~, at init-time, if Emacs detects the tangled configuration files are older than the Org file, then Emacs tangles them again, and then loads them. * Spacemacs layers and packages :PROPERTIES: :header-args:emacs-lisp: :mkdirp yes :tangle ~/.config/emacs/private/spacemacs-layers.el :exports code :results silent :lexical t :CUSTOM_ID: Spacemacs_layers_and_packages-6d318b87 :END: #+BEGIN_SRC emacs-lisp :exports none ;; -*- lexical-binding: t -*- #+END_SRC Here will be our layer configuration set. Everything here is set with a ~setq-default~ in the ~dotspacemacs/layers~ function like so: #+BEGIN_SRC emacs-lisp :tangle no (defun dotspacemacs/layers () (setq-default ;; configuration goes here )) #+END_SRC ** General configuration :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-General_configuration-66b4311e :END: First, we need to tell Spacemacs which base distribution we are using. This is a layer contained in the directory ~+distribution~. For now, available distributions are ~spacemacs-base~ and ~spacemacs~ (the default one). #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-distribution 'spacemacs) #+END_SRC We can seet a lazy installation of layers —i.e. layers are installed only when a file with a supported type is opened. Possible values are: - ~all~ :: will lazy install any layer that support lazy installation even the layers listed in ~dotspacemacs-configuration-layers~ - ~unused~ :: will lazy install only unused layers (i.e. layers not listed in the variable ~dotspacemacs-configuration-layers~) - ~nil~ :: disables the lazy installation feature and you have to explicitly list a layer in the variable ~dotspacemacs-configuration-layers~ to install it. The default value is ~unused~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-enable-lazy-installation 'lazy) #+END_SRC If the following variable is non-nil, Spacemacs will ask for confirmation before installing a layer lazily. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-ask-for-lazy-installation t) #+END_SRC ** Package management :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Package_management-0add1a62 :END: It is possible to indicate to Spacemacs a list of additional paths where to look for configuration layers. Paths must have a trailing slash, i.e. =~/.mycontribs/=. As you can see, I added only one: #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-configuration-layer-path '("~/fromGIT/emacs-packages")) #+END_SRC However, I do have additional packages I installed either from the Elpa or the Melpa. These are set in ~dotspacemacs-additional-packages~, a list of additional packages that will be installed without being wrapped in a layer. If I need some configuration for these packages, then I should consider creating a layer. I can also puth the configuration in ~dotspacemacs/user-config~. To use a local version of a package, use the ~:location~ property, for instance: #+BEGIN_SRC emacs-lisp :tangle no '(your-package :location "~/path/to/your-package/") #+END_SRC With the variable ~dotspacemacs-additional-packages~, it is possible to install extra packages which are not already included in any layers. Dependencies should be explicitly included as they won’t be resolved automatically. Here is a table of all the extra packages I use: #+NAME: extra-packages | name of the package | why is it installed | |----------------------------+--------------------------------------------------------| | caddyfile-mode | Major mode for editing Caddyfiles | | dired-git-info | Git information in Dired buffers | | diredfl | Extra font lock rules for a more colourful dired | | edit-indirect | edit region in separate buffer | | elcord | rich integration of Emacs in Discord | | eshell-syntax-highlighting | Syntax highlighting for Eshell | | info-colors | Extra colors for Emacs's Info-mode | | magit-gitflow | integrate gitflow in Magit | | multiple-cursors | I don’t like the layer, I prefer this package alone | | ob-swift | org-babel package for Swift | | ob-latex-as-png | Inline arbitrary LaTeX snippets as PNGs in Emacs | | org-sidebar | display on the side the outline of an Org buffer | | org-tree-slide | presentation tool for org-mode | | outorg | edit comments as Org-mode buffers | | pinentry | enter a GPG password from Emacs | | nord-theme | An arctic, north-bluish clean and elegant Emacs theme. | | s | The long lost Emacs string manipulation library. | | sicp | Texinfo version of the [[https://mitpress.mit.edu/sites/default/files/sicp/index.html][SICP]] | | visual-fill-column | allow the use of ~fill-column~ in ~visual-line-mode~ | | wrap-region | easily wrap region with delimiters | | wttrin | weather in Emacs | | yasnippet-snippets | snippets for YaSnippet | #+name: make-extra-pkg #+begin_src emacs-lisp :var packages=extra-packages[,0] :tangle no :exports none (mapcar 'make-symbol packages) #+end_src #+begin_src emacs-lisp :noweb yes :exports none (setq-default dotspacemacs-additional-packages '<>) #+end_src It is possible to also list packages that cannot be updated: #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-frozen-packages '(helm-icons)) #+END_SRC And to list packages which won’t be installed nor loaded: #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-excluded-packages '(company-tern)) #+END_SRC Finally, it is possible to define the behaviour of Spacemacs when installing packages. Possible values are: - ~used-only~ :: installs only explicitly used packages and deletes any unused packages as well as their unused dependencies - ~used-but-keep-unused~ :: installs only the used packages but won’t delete unused ones - ~all~ :: installs *all* packages supported by Spacemacs and never uninstalls them. The default value is ~used-only~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-install-packages 'used-only) #+END_SRC ** Layers :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-36e1c90c :END: All layers are set one variable: ~dotspacemacs-configuration-layers~. This variable is a list of layers, some of them will have some custom variables. Typically, the variable will be set like so: #+BEGIN_SRC emacs-lisp :tangle no (setq-default dotspacemacs-configuration-layers '(emacs-lisp helm multiple-cursors org (shell :variables shell-default-height 30 shell-default-position 'bottom) treemacs)) #+END_SRC # Don’t delete this code block, it wraps the layers #+BEGIN_SRC emacs-lisp :exports none (setq-default dotspacemacs-configuration-layers '( #+END_SRC *** Checkers :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Checkers-aefeae26 :END: The two first checkers I use are for spell and syntax checking. ~spell-checking~ is disabled by default, however it should auto-detect the dictionary to use. #+BEGIN_SRC emacs-lisp (spell-checking :variables spell-checking-enable-by-default nil spell-checking-enable-auto-dictionary t) syntax-checking #+END_SRC *** Completion :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Completion-883e2b83 :END: ~auto-completion~ is a layer enabled in order to provide auto-completion to all supported language layers. It is set so that the =RET= key has no behavior with this layer, however the =TAB= key cycles between candidates displayed by the auto-completion toolbox. I also want the autocompletion to include snippets in the popup, and the content of the popup is sorted by usage. It is also disabled for two modes: magit and Org. #+BEGIN_SRC emacs-lisp (auto-completion :variables auto-completion-complete-with-key-sequence-delay 0.2 auto-completion-enable-help-tooltip 'manual auto-completion-enable-sort-by-usage t :disabled-for org git) #+END_SRC ~helm~ is also enabled, with its header disabled. #+BEGIN_SRC emacs-lisp (helm :variables helm-no-header t) #+END_SRC *** Email :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Email-67c16308 :END: I use as my daily Email client ~mu4e~, so let’s enable it and tell Emacs where mu4e is installed. I also tell mu4e to use maildirs extensions, use async operations, where to keep attachments, and enable the mu4e modeline. #+BEGIN_SRC emacs-lisp (mu4e :variables mu4e-installation-path "/usr/share/emacs/site-lisp" mu4e-use-maildirs-extension t mu4e-enable-mode-line t mu4e-attachment-dir "~/Documents/mu4e") #+END_SRC *** Emacs :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Emacs-8e976e5c :END: The first layer enabled in this category is ~better-defaults~. I also made it so that when a command equivalent to ~C-a~ or ~C-e~ is pressed, the cursor will respectively first move to the beginning of code first before going past the indentation and to the end of the code before going to the end of the line before going over the end of the comments on the same line. #+BEGIN_SRC emacs-lisp (better-defaults :variables better-defaults-move-to-beginning-of-code-first t better-defaults-move-to-end-of-code-first t) #+END_SRC I also enabled ~ibuffer~ and made it so that buffers are sorted by projects. #+BEGIN_SRC emacs-lisp (ibuffer :variables ibuffer-group-buffers-by 'projects) #+END_SRC Most important of all, the ~org~ layer is also enabled. I enabled support for Epub exports, Github, Reveal.JS exports, and sticky headers. Project support is also enabled through files named ~TODOs.org~. I also set the org-download folder for images in =~/Pictures/org/=, and I set the =RET= key to follow org links if the cursor is on one. #+BEGIN_SRC emacs-lisp (org :variables org-enable-epub-support t org-enable-github-support t org-enable-hugo-support t org-enable-roam-support t org-enable-reveal-js-support t org-enable-sticky-header t spaceline-org-clock-p t org-projectile-file "TODOs.org" org-download-image-dir "~/Pictures/org/" org-return-follows-link t) #+END_SRC The ~semantic~ layer is also enabled. #+BEGIN_SRC emacs-lisp semantic #+END_SRC *** File trees :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-File_trees-5b6ed3e4 :END: In this category, I only enabled one layer: ~treemacs~. In this layer, I set is so that treemacs syncs with my current buffer, and it automatically refreshes its buffer when there is a change in the part of the file system shown by treemacs. #+BEGIN_SRC emacs-lisp (treemacs :variables treemacs-use-follow-mode t treemacs-use-filewatch-mode t) #+END_SRC *** Fonts :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Fonts-11de8977 :END: In this category, again, one layer is enabled: ~unicode-fonts~. This layer addssupport for the ~unicode-fonts~ package. #+BEGIN_SRC emacs-lisp (unicode-fonts :variables unicode-fonts-enable-ligatures t unicode-fonts-ligature-modes '(prog-mode) unicode-fonts-ligature-set '("|||>" "<|||" "<==>" "" "---" "-<<" "<~~" "<~>" "<*>" "<||" "<|>" "<$>" "<==" "<=>" "<=<" "<->" "<--" "<-<" "<<=" "<<-" "<<<" "<+>" "" "###" "#_(" "..<" "..." "+++" "/==" "///" "_|_" "www" "&&" "^=" "~~" "~@" "~=" "~>" "~-" "**" "*>" "*/" "||" "|}" "|]" "|=" "|>" "|-" "{|" "[|" "]#" "::" ":=" ":>" ":<" "$>" "==" "=>" "!=" "!!" ">:" ">=" ">>" ">-" "-~" "-|" "->" "--" "-<" "<~" "<*" "<|" "<:" "<$" "<=" "<>" "<-" "<<" "<+" "" "++" "?:" "?=" "?." "??" ";;" "/*" "/=" "/>" "//" "__" "~~" "(*" "*)" "\\\\" "://")) #+END_SRC *** Fun :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Fun-0728c04c :END: In this category, I only enabled two layers: ~selectric~ and ~xkcd~. #+BEGIN_SRC emacs-lisp selectric xkcd #+END_SRC *** Internationalization :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Internationalization-69601ff8 :END: In this category, I enabled the ~keyboard-layout~ layer to enable compatibility with the bépo layout. This layer, however, is disabled for magit, Dired and eww. #+BEGIN_SRC emacs-lisp (keyboard-layout :variables kl-layout 'bepo kl-disabled-configurations '(magit dired eww)) #+END_SRC *** Programming languages :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Programming_languages-4c318b81 :END: **** Domain-specific (DSLs) :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Programming_languages-Domain-specific_(DSLs)-2c919937 :END: In this category, I enabled support for the ~major-modes~ layer for the Arch Linux PKGBUILDs support, ~emacs-lisp~ and ~scheme~ layers, support for the CSV format with the ~csv~ layer, the ~yaml~ language, shell scripting languages and support for the ~dot~ tool with the ~graphviz~ layer. #+BEGIN_SRC emacs-lisp major-modes emacs-lisp scheme graphviz yaml shell-scripts #+END_SRC I also added support for HTML and CSS with the ~html~ layer, with the web formatting tool set to ~web-beautify~, and the LSP layer compatibility enabled for CSS, less, SCSS and HTML. #+BEGIN_SRC emacs-lisp (html :variables web-fmt-tool 'web-beautify css-enable-lsp t less-enable-lsp t scss-enable-lsp t html-enable-lsp t) #+END_SRC The ~json~ layer is also enabled, with the format tool set to ~web-beautify~. #+BEGIN_SRC emacs-lisp (json :variables json-fmt-tool 'web-beautify) #+END_SRC The LaTeX layer has also been enabled, with its default compiler set to XeLaTeX. I also enabled the auto-fill feature, the folding capacity and the “magic” symbols. #+BEGIN_SRC emacs-lisp (latex :variables latex-build-command "xelatex" latex-enable-auto-fill t latex-enable-folding t latex-enable-magic t) #+END_SRC The Markdown layer has been enabled, with support for live preview with ~vmd~, and and automatic MMM-mode generation for C, C++, Python, Rust and Emacs Lisp. #+BEGIN_SRC emacs-lisp (markdown :variables markdown-live-preview-engine 'vmd markdown-mmm-auto-modes '("c" "c++" "python" "rust" ("elisp" "emacs-lisp"))) #+END_SRC PlantUML is a very useful DSL for creating UML diagrams from some text description. As you can see below, this layer will be enabled, both as a standalone mode for opening ~.pum~ files, but also for org-mode code blocks. #+BEGIN_SRC emacs-lisp (plantuml :variables plantuml-jar-path "~/.local/bin/plantuml.jar" org-plantuml-jar-path "~/.local/bin/plantuml.jar") #+END_SRC #+BEGIN_SRC emacs-lisp (bibtex :variables org-ref-default-bibliography '("~/Documents/Papers/references.bib") org-ref-pdf-directory "~/Documents/Papers" org-ref-bibliography-notes "~/Documents/Papers/notes.org") #+END_SRC #+BEGIN_SRC emacs-lisp csv #+END_SRC **** Frameworks :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Programming_languages-Frameworks-f7c21585 :END: Only one framework support has been enabled so far, and is is for the Django framework. #+BEGIN_SRC emacs-lisp django #+END_SRC **** General-purpose :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Programming_languages-General-purpose-1ed71a5b :END: Among the layers I activated, the only one without any specific configuration is the ~asm~ layer for the Assembly language. #+BEGIN_SRC emacs-lisp asm #+END_SRC Next, you can find the C/C++ layer for which I set the default language for ~.h~ files to be C. I also enabled support for subprojects and organization of the include directives on a file save. I also set a couple of LSP-related variables, such as the LSP executable for C/C++ for its CCLS backend and some highlight variables. #+BEGIN_SRC emacs-lisp (c-c++ :variables c-c++-default-mode-for-headers 'c-mode c-c++-adopt-subprojects t c-c++-enable-c++11 t c-c++-backend 'lsp-clangd c-c++-lsp-enable-semantic-highlight t c-c++-lsp-semantic-highlight-method 'overlay c-c++-lsp-semantic-highlight-rainbow t c++-enable-organize-includes-on-save t) #+END_SRC Dart has also been enabled, with a custom path to the SDK of the Dart server, and to the LSP server of Dart. #+BEGIN_SRC emacs-lisp (dart :variables lsp-dart-project-sdk-dir "/opt/dart-sdk/" lsp-dart-sdk-dir "/opt/dart-sdk/") #+END_SRC When it comes to the Python layer, I set its backend and formatter to be bound to the LSP layer. Its fill columnn was also set to 80 characters, imports are sorted on save, and the tests can be run using either nose.el or pytest. #+BEGIN_SRC emacs-lisp (python :variables python-fill-column 80 python-test-runner '(pytest nose)) #+END_SRC With the Rust layer, the only custom configuration set is the backend being bound to the LSP layer. #+BEGIN_SRC emacs-lisp (rust :variables rust-backend 'lsp) #+END_SRC As regards the JavaScript layer, I set its backend to the LSP layer, and bound its format tool to ~web-beautify~ and its REPL is browser-based. I also want to include ~node_modules/.bin~ to be automatically added to the buffer local ~exec_path~. #+BEGIN_SRC emacs-lisp (javascript :variables javascript-backend 'lsp javascript-fmt-tool 'web-beautify javascript-repl 'skewer node-add-modules-path t) #+END_SRC Alternatively, I also use Typescript which is a sort of better Javascript as it should have been, with the LSP backend. #+BEGIN_SRC emacs-lisp (typescript :variables typescript-backend 'lsp) #+END_SRC I am also currently using the Awesome window manager which requires the Lua programming language, so here it is. #+BEGIN_SRC emacs-lisp (lua :variables lua-backend 'lsp-emmy lua-lsp-emmy-jar-path "~/.config/awesome/EmmyLua-LS-all.jar" lua-lsp-emmy-java-path "java" lua-lsp-emmy-enable-file-watchers t) #+END_SRC Unfortunately, I have to write Swift code for one of my university courses, so here is the layer: #+BEGIN_SRC emacs-lisp swift #+END_SRC *** Readers :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Readers-65e8e4ae :END: **** Epub and Pdf readers :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Readers-Epub_and_Pdf_readers-0ef6688f :END: In this category, only the ~epub~ and ~pdf~ layers are enabled without any special configuration, so I can read these files from Emacs directly. #+BEGIN_SRC emacs-lisp epub pdf #+END_SRC **** Elfeed :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Readers-Elfeed-78877179 :END: Elfeed is an Emacs feeed and RSS reader which can be managed through org files. Actually, through only one file in my case, located in my =~/org= directory. #+BEGIN_SRC emacs-lisp (elfeed :variables rmh-elfeed-org-files '("~/org/elfeed.org")) #+END_SRC *** Version control :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Version_control-bc8e286a :END: Only the ~git~ layer is enabled in this category. #+BEGIN_SRC emacs-lisp git #+END_SRC *** Themes :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Themes-d88d1225 :END: Here, the ~colors~ layer is the only one enabled. It activates support for identifiers colorization, and strings representing colors. #+BEGIN_SRC emacs-lisp colors #+END_SRC *** Tools :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Tools-e57e405e :END: In this category, the first layer to be enabled is the CMake layer for which I enabled support for the ~cmake-ide~ package. #+BEGIN_SRC emacs-lisp (cmake :variables cmake-enable-cmake-ide-support t) #+END_SRC Next, we have the Docker, Nginx, Pass (the standard Unix password manager), Prettier, Systemd, Meson, Imenu-list, Web-beautify, Dap, Helpful, and LSP layers enabled. #+BEGIN_SRC emacs-lisp dap docker helpful imenu-list lsp meson nginx pass prettier systemd web-beautify #+END_SRC We also have the RestClient layer enabled for which I enabled the Org compatibility support. #+BEGIN_SRC emacs-lisp (restclient :variables restclient-use-org t) #+END_SRC LanguageTool works with Flyspell and will check for grammatical issues in my english texts. #+BEGIN_SRC emacs-lisp (languagetool :variables langtool-default-language "en-US" languagetool-show-error-on-jump t langtool-java-classpath "/usr/share/languagetool:/usr/share/java/languagetool/*") #+END_SRC And finally, we also have the Shell layer for which I specified its default height when spawning at the bottom of the screen should be 40 lines high, and the default shell to invoke is Eshell. #+BEGIN_SRC emacs-lisp (shell :variables shell-default-height 40 shell-default-position 'bottom shell-default-shell 'eshell) #+END_SRC *** Web Services :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Web_Services-c2888251 :END: In this category, I have only enabled a layer for Twitter support. #+BEGIN_SRC emacs-lisp twitter #+END_SRC *** Custom layers :PROPERTIES: :CUSTOM_ID: Spacemacs_layers_and_packages-Layers-Custom_layers-69473533 :END: Lastly, one custom layers have been enabled: my custom layers for conlanging tools. #+BEGIN_SRC emacs-lisp conlanging #+END_SRC # Don’t delete this code block, it wraps the layers #+BEGIN_SRC emacs-lisp :exports none )) #+END_SRC * Init :PROPERTIES: :header-args:emacs-lisp: :mkdirp yes :tangle ~/.config/emacs/private/spacemacs-init.el :exports code :results silent :lexical t :CUSTOM_ID: Init-99a4b561 :END: #+BEGIN_SRC emacs-lisp :exports none ;; -*- lexical-binding: t -*- #+END_SRC The ~dotspacemacs/init~ function is the one called at the very begining of the Spacemacs startup, before any kind of configuration, including the layer configuration. Only the values of the Spacemacs settings should be modified here. By default, every values are set in a ~setq-default~ sexp, and they represent all the supported Spacemacs settings. Hence, the function looks like this: #+BEGIN_SRC emacs-lisp :tangle no (defun dotspacemacs/init () (setq-default ;; default Spacemacs configuration here )) #+END_SRC ** Handling my Spacemacs litterate config :PROPERTIES: :header-args:emacs-lisp: :tangle no :exports code :results silent :lexical t :CUSTOM_ID: Init-Handling-my-Spacemacs-litterate-config-679170db :END: Just before we get onto the usual content of the ~dotspacemacs/init~ function you would find in a typical Spacemacs installation, I would like to talk a bit about how I manage writing a litterate config for Spacemacs and ensure Emacs starts with an up-to-date configuration from said litterate config. For that, I actually declared a couple of variables: #+BEGIN_SRC emacs-lisp (defvar phundrak//dotspacemacs-src-dir "~/.config/emacs/private/" "Directory for my exported Elisp configuration files") (defvar phundrak//dotspacemacs-src "~/org/config/emacs.org" "My litterate config file for Emacs") (defvar phundrak//dotspacemacs-si (concat phundrak//dotspacemacs-src-dir "spacemacs-init")) (defvar phundrak//dotspacemacs-sl (concat phundrak//dotspacemacs-src-dir "spacemacs-layers")) (defvar phundrak//dotspacemacs-uc (concat phundrak//dotspacemacs-src-dir "user-config")) (defvar phundrak//dotspacemacs-ui (concat phundrak//dotspacemacs-src-dir "user-init")) (defvar phundrak//dotspacemacs-files (list phundrak//dotspacemacs-si phundrak//dotspacemacs-sl phundrak//dotspacemacs-uc phundrak//dotspacemacs-ui)) #+END_SRC I also declared the following function that tells me if my Elisp files are more recent than my ~emacs.org~ file. The ~compiled?~ argument lets me compare either the ~.el~ files if it is ~nil~, or the ~.elc~ files if it is ~t~. #+BEGIN_SRC emacs-lisp (defun phundrak/update-config-files-p (&optional compiled?) "Verify if any of my exported Elisp configuration files are newer than my litterate configuration. If `compiled?' is `t', check the `.elc' files instead of the `.el' files." (catch 'ret (dolist (file phundrak//dotspacemacs-files) (when (file-newer-than-file-p phundrak//dotspacemacs-src (format "%s.%s" file (if compiled? "elc" "el"))) (throw 'ret t))))) #+END_SRC Now I know a couple of my files that get exported by this document. If I compare how recent these files are compared to my litterate config, I know if Emacs missed tangling its configuration before launching, so if any of my ~si~, ~sl~, ~uc~, or ~ui~ files are older than my ~emacs.org~, then I’ll tangle the latter; and since my user config is growing longer and longer, I want Emacs to be able to parse it fast next time it boots, so let’s compile my exported ~.el~ files! #+BEGIN_SRC emacs-lisp (when (or (file-newer-than-file-p phundrak//dotspacemacs-src (concat phundrak//dotspacemacs-si ".el")) (file-newer-than-file-p phundrak//dotspacemacs-src (concat phundrak//dotspacemacs-sl ".el")) (file-newer-than-file-p phundrak//dotspacemacs-src (concat phundrak//dotspacemacs-ui ".el")) (file-newer-than-file-p phundrak//dotspacemacs-src (concat phundrak//dotspacemacs-uc ".el"))) (message "Exporting new Emacs configuration from spacemacs.org through org-babel...") (with-temp-buffer (shell-command (format "emacs -Q --batch %s %s %s" "--eval \"(require 'ob-tangle)\"" "--eval \"(setq org-confirm-babel-evaluate nil)\"" (format "--eval '(org-babel-tangle-file \"%s\")'" phundrak//dotspacemacs-src)) (current-buffer))) (message "Exporting new Emacs configuration from spacemacs.org through org-babel...done") (with-temp-buffer (byte-recompile-directory phundrak//dotspacemacs-src-dir 0 t))) #+END_SRC All that’s left to do in the Spacemacs functions is to call ~load~ on ~si~, ~sl~, ~uc~, and ~ui~. Be aware this sub-chapter won’t be tangled, so it might not be up to date with the [[https://labs.phundrak.com/phundrak/dotfiles/src/branch/master/.spacemacs][actual dotspacemacs file]]. Please check it just in case something changed and I forgot to update this part of ~emacs.org~. ** Emacs with pdumper :PROPERTIES: :CUSTOM_ID: Init-Emacs_with_pdumper-f24ab30b :END: It is possible to compile Emacs 27 from source with support for the portable dumper, as shown in Spacemacs’ ~EXPERIMENTAL.org~ file. I do not use this feature yet, as I am still on Emacs 26 provided from Arch Linux’s repositories, so I’ll disable the Spacemacs support for this feature. The default value of this variable is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-enable-emacs-pdumper t) #+END_SRC In case the support for pdumper was enabled, Spacemacs needs to know the name of the Emacs executable which supports such a feature. The executable must be in the user’s ~PATH~. By default, the value of the variable is ~"emacs"~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-emacs-pdumper-executable-file "emacs") #+END_SRC And finally, we can name the Spacemacs dump file. This is the file that will be created by the portable dumper in the cache directory under the ~dumps~ sub-directory. To load it when starting Emacs, the parameter ~--dump-file~ should be added when invoking Emacs 27.1 executable from the command line, for instance: #+BEGIN_SRC sh :tangle no :exports code ./emacs --dump-file=~/.config/emacs/.cache/dumps/spacemacs.pdmp #+END_SRC The default value of this variable is ~"spacemacs.pdmp"~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)) #+END_SRC ** Package managment and updates :PROPERTIES: :CUSTOM_ID: Init-Package_managment_and_updates-79363da3 :END: Spacemacs’ core configuration can be updated via git commands using Github services. If Spacemacs is not set to the ~develop~ branch, it can check by itself if any update is available. However, I am using said branch, therefore I should set this variable to ~nil~. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-check-for-update nil) #+END_SRC When it comes to package management, Spacemacs is able to store them in different directories depending on the version of Emacs used or based on other variables. I personally prefer to use the value ~emacs-version~ since it makes it easier to upgrade or downgrade Emacs without any conflict with the already installed packages. The default value is ~emacs-version~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-elpa-subdirectory 'emacs-version) #+END_SRC Spacemacs has a capacity of performing rollbacks after updates. We can set the maximum number of rollback slots to keep in the cache. The default value is ~5~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-max-rollback-slots 5) #+END_SRC *** Elpa repository :PROPERTIES: :CUSTOM_ID: Init-Package_managment_and_updates-Elpa_repository-c07fb1c4 :END: It is possible to ask Emacs to use an HTTPS connection when contacting the Elpa whenever possible. This value should be set to ~nil~ when the user has no way to contact the Elpa though HTTPS, otherwise it is strongly recommended to let it set to ~t~. This variable however has no effect if Emacs is launched with the parameter ~--insecure~ which forces the value of this variable to ~nil~. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-elpa-https t) #+END_SRC We can set a maximum amount of seconds which will represent the maximum allowed time to contact the Elpa repository. By default, this setting is set on ~5~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-elpa-timeout 5) #+END_SRC *** Spacelpa repository :PROPERTIES: :CUSTOM_ID: Init-Package_managment_and_updates-Spacelpa_repository-a431b288 :END: The Spacelpa repository is a Spacemacs-specific package repository. It is possible to use it as the primary source to install a locked version of a package. If the below value is set to ~nil~, then Spacemacs will install the latest version of packages from MELPA. I personally don’t use it, so I let it set to ~nil~. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-use-spacelpa nil) #+END_SRC If the below value is not ~nil~, then the signature for the downloaded Spacelpa packages must be verified. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-verify-spacelpa-archives t) #+END_SRC ** Editing style :PROPERTIES: :CUSTOM_ID: Init-Editing_style-56d58a4b :END: By default, Spacemacs encourages the use of evil-mode, which brings vim keybinding in Emacs. Still, it has three different styles available: - ~vim~, which goes full evil-mode usage and most adapted to Emacs newcomers, especially if they were used to vim before, with the use of a normal mode and an insert mode. - ~emacs~ which keeps an Emacs-like feel to the keybindings, without any difference between an insert or normal mode. - ~hybrid~ is a modification of the ~vim~ mode which brings the ~emacs~ style in insert mode, but otherwise behaves like the ~vim~ style in normal mode. This is the style I personally use. The value can also be a list with the ~:variables~ keyword (similar to layers). Check the editing styles section of the documentation for details on available variables. The default value is ~vim~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-editing-style '(hybrid :variables hybrid-mode-enable-evilified-state t hybrid-mode-default-state 'normal)) #+END_SRC If non-nil, the paste transient-state is enabled. While enabled, after you paste something, pressing ~C-j~ and ~C-k~ several times cycles through the elements in the ~kill-ring~. Default ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-enable-paste-transient-state t) #+END_SRC ** Spacemacs home configuration :PROPERTIES: :CUSTOM_ID: Init-Spacemacs_home_configuration-8375cdcc :END: The value below specifies the startup banner of Spacemacs. The default value is ~official~, it displays the official Spacemacs logo. An integer value is the index of text banner, ~random~ chooses a random text banner in the ~core/banners~ directory. A string value must be a path to an image format supported by your Emacs build. If the value is nil, then no banner is displayed. The default value is ~official~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-startup-banner 'official) #+END_SRC On the Spacemacs homepage, a list of elements can also be shown, be it recent files, projects, agenda items,… Each of the elements making up the list value of the below variable are pairs in the form ~(list-type . list-size)~. If the value is ~nil~, then it is disabled. The possible values for ~list-type~ are: - ~recents~ :: displays recently opened files - ~bookmarks~ :: displays saved bookmarks - ~projects~ :: displays projectile projects recently opened - ~agenda~ :: displays upcoming events from Org-mode agendas - ~todos~ :: displays recent TODOs detected in projectile projects The order in which they are set in the below list affects their order on the Spacemacs startup page. List sikes may be ~nil~, in which case ~spacemacs-buffer-startup-lists-length~ takes effect. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-startup-lists '((recents . 15) (projects . 15))) #+END_SRC The below variable allows the startup page to respond to resize events. Its default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-startup-buffer-responsive t) #+END_SRC If non-nil show the version string in the Spacemacs buffer. It will appear as ~(spacemacs version)@(emacs version)~. Default ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-startup-buffer-show-version t) #+END_SRC ** Default major modes :PROPERTIES: :CUSTOM_ID: Init-Default_major_modes-37f4a891 :END: The below variable sets a default major mode for a new empty buffer. Possible values are mode names such as ~text-mode~, or ~nil~ to use Fundamental mode. The default value is ~text-mode~, but I prefer to use ~org-mode~ by default. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-new-empty-buffer-major-mode 'org-mode) #+END_SRC Similarly, the below variable sets the default mode for the scratch buffer. Its default value is ~text-mode~, but I set it to use ~emacs-lisp-mode~ by default. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-scratch-mode 'emacs-lisp-mode) #+END_SRC By the way, it is possible to set a default message for the scratch buffer, such as “Welcome to Spacemacs!”. I prefer to keep it clean. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-initial-scratch-message nil) #+END_SRC ** Visual configuration :PROPERTIES: :CUSTOM_ID: Init-Visual_configuration-c4116cc1 :END: *** Themes :PROPERTIES: :CUSTOM_ID: Init-Visual_configuration-Themes-315992bb :END: Spacemacs makes it quite easy to use themes and organize them. The below value is a list of themes, the first of the list is loaded when Spacemacs starts. The user can press ~SPC T n~ to cycle to the next theme in the list. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-themes '(nord doom-nord doom-vibrant spacemacs-dark doom-one doom-opera doom-dracula doom-molokai doom-peacock doom-sourcerer doom-spacegrey kaolin-dark kaolin-aurora kaolin-bubblegum kaolin-galaxy kaolin-mono-dark kaolin-temple kaolin-valley-dark)) #+END_SRC Emacs also makes use of themes for the Spaceline at the bottom of buffers. Supported themes are: - ~spacemacs~ - ~all-the-icons~ - ~custom~ - ~doom~ (the one I use) - ~vim-powerline~ - ~vanilla~ The first three are Spaceline themes. ~doom~ is the Doom-Emacs mode-line, and ~vanilla~ is the default Emacs mode-line. ~custom~ is a user defined theme, refer to Spacemacs’ ~DOCUMENTATION.org~ file for more info on how to create your own Spaceline theme. Value can be a symbol or list with additional properties. The default value is ~'(spacemacs :separator wave :separator-scale 1.5))~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-mode-line-theme '(doom :separator wave :separator-scale 1.0)) #+END_SRC It is also possible to color the cursor depending on which mode Spacemacs is in, in order to mach the state color in GUI Emacs. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-colorize-cursor-according-to-state t) #+END_SRC The below variable sets either the default font or a prioritized list of fonts to be used by Emacs. The ~:size~ can be specified as a non-negative integer (pixel size), or a floating-point (point size). Point size is recommended, because it’s device independent (add a ~.0~ to make an integer a floating point). The default size is ~10.0~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-default-font '("Cascadia Code" :size 9.0)) #+END_SRC I also added the following code in order to define a fallback font for emojis, defined only on their unicode range: #+BEGIN_SRC emacs-lisp (set-fontset-font "fontset-default" '(#x1f600 . #x1f64f) "NotoEmoji Nerd Font") #+END_SRC *** Other on-screen elements :PROPERTIES: :CUSTOM_ID: Init-Visual_configuration-Other_on-screen_elements-7d334e09 :END: ~which-key~ is a helper which displays available keyboard shortcuts. This variable sets in seconds the time Spacemacs should wait between a key press and the moment ~which-key~ should be shown. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-which-key-delay 1) #+END_SRC This variable sets ~which-key~'s frame position. Possible values are: - ~right~ - ~bottom~ - ~right-then-bottom~ ~right-then-bottom~ tries to display the frame to the right, but if there is insufficient space it displays it at the bottom. The default value is ~bottom~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-which-key-position 'right-then-bottom) #+END_SRC This controls where ~switch-to-buffer~ displays the buffer. If the value is ~nil~, ~switch-to-buffer~ displays the buffer in the current window even if another same-purpose window is available. If non-nil, ~switch-to-buffer~ displays the buffer in a same-purpose window even if the buffer can be displayed in the current window. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-switch-to-buffer-prefers-purpose nil) #+END_SRC If this variable is non-nil, a progress bar is displayed when Spacemacs is loading. This may increase the boot time on some systems and emacs builds, set it to ~nil~ to boost the loading time. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-loading-progress-bar t) #+END_SRC If the value is non-nil, Emacs will show the title of the transient states. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-show-transient-state-title t) #+END_SRC If non-nil, this will show the color guide hint for transient state keys. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-show-transient-state-color-guide t) #+END_SRC If non-nil, unicode symbols are displayed in the mode line. If you use Emacs as a daemon and want unicode characters only in GUI set the value to quoted ~display-graphic-p~. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-mode-line-unicode-symbols t) #+END_SRC If non-nil, smooth scrolling (native-scrolling) is enabled. Smooth scrolling overrides the default behavior of Emacs which recenters point when it reaches the top or bottom of the screen. The default value is ~t~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-smooth-scrolling t) #+END_SRC The following value controls the line number activation. If set to ~t~, ~relative~ or ~visual~ then line numbers are enabled in all ~prog-mode~ and ~text-mode~ derivatives. If set to ~relative~, line numbers are relative. If set to ~visual~, line numbers are also relative, but only visual lines are counted. For example, folded lines will not be counted and wrapped lines are counted as multiple lines. This variable can also be set to a property list for finer control: #+BEGIN_SRC emacs-lisp :tangle no '(:relative nil :visual nil :disabled-for-modes dired-mode doc-view-mode markdown-mode org-mode pdf-view-mode text-mode :size-limit-kb 1000) #+END_SRC When used in a plist, ~visual~ takes precendence over ~relative~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-line-numbers '(:relative nil :enabled-for-modes prog-mode)) #+END_SRC Select a scope to highlight delimiter. Possible values are: - ~any~ - ~current~ - ~all~ - ~nil~ The default value is ~all~ (highlights any scope and emphasis the current one). #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-highlight-delimiters 'all) #+END_SRC After a certain amount of time in seconds, Spacemacs can zone-out. The default value is ~nil~. I set it so Spacemacs zones out after 15 minutes. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-zone-out-when-idle 900) #+END_SRC Run ~spacemacs/prettify-org-buffer~ when visiting the ~README.org~ files of Spacemacs. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-pretty-docs nil) #+END_SRC If ~nil~, the home buffer shows the full path of agenda items and todos. If non ~nil~, only the file name is shown. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-home-shorten-agenda-source t) #+END_SRC *** Appearance of Emacs frames :PROPERTIES: :CUSTOM_ID: Init-Visual_configuration-Appearance_of_Emacs_frames-59700bb7 :END: Starting from Emacs 24.4, it is possible to make the Emacs frame fullscreen when Emacs starts up if the variable is set to a non-nil value. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-fullscreen-at-startup nil) #+END_SRC This variable is to be used if the user does not want to use native fullscreen with ~spacemacs/toggle-fullscreen~. This disables for instance the fullscreen animation under OSX. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-fullscreen-use-non-native nil) #+END_SRC If you do not start Emacs in fullscreen at startup, you might want it to be maximized by default. If the value for the variable below is set to be non-nil, the frame will be maximized. This can only work if ~dotspacemacs-fullscreen-at-startup~ is set to ~nil~, and it is only available from Emacs 24.4 onwards. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-maximized-at-startup nil) #+END_SRC If non-nil, the frame is undecorated when Emacs starts up. Combine this with the variable ~dotspacemacs-maximized-at-startup~ in OSX to obtain borderless fullscreen. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-undecorated-at-startup nil) #+END_SRC You can also set a transparency level for Emacs when you toggle the transparency of the frame with ~toggle-transparency~. The value of the transparency, going from 0 to 100 in increasing opacity, describes the transparency level of a frame when it’s active or selected. The default value is ~90~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-active-transparency 85) #+END_SRC Similarly, you can set a value from 0 to 100 in increasing opacity which describes the transparency level of a frame when it’s inactive or deselected. The default value is ~90~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-inactive-transparency 80) #+END_SRC The variable below sets the format of frame title. You can use: - ~%a~ :: the ~abbreviated-file-name~ or ~buffer-name~ - ~%t~ :: ~projectile-project-name~ - ~%I~ :: ~invocation-name~ - ~%S~ :: ~system-name~ - ~%U~ :: contents of ~$USER~ - ~%b~ :: buffer name - ~%f~ :: visited file name - ~%F~ :: frame name - ~%s~ :: process status - ~%p~ :: percent of buffer above top of window, or Top, Bot, or All - ~%P~ :: percent of buffer above bottom of window, perhaps plus Top, or Bot, or All - ~%m~ :: mode name - ~%n~ :: Narrow if appropriate - ~%z~ :: mnemonics of buffer, terminal, and keyboard coding systems - ~%Z~ :: like ~%z~, but including the end-of-line format The default value is ~"%I@%S"~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-frame-title-format "Emacs: %b (%t) %U@%S") #+END_SRC Format specification for setting the icon title format. The default value is ~nil~, same as ~frame-title-format~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-icon-title-format nil) #+END_SRC ** Spacemacs leader keys and shortcuts :PROPERTIES: :CUSTOM_ID: Init-Spacemacs_leader_keys_and_shortcuts-ebf21abe :END: The below setting sets the Spacemacs leader key. By default, this is the ~SPC~ key. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-leader-key "SPC") #+END_SRC Once the leader key has been pressed, it is possible to set another key in order to call Emacs’ command ~M-x~. By default, it is again the ~SPC~ key. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-emacs-command-key "SPC") #+END_SRC It is also possible to invoke Vim Ex commands with the press of a key, and by default it is the ~:~ key. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-ex-command-key ":") #+END_SRC The below variable sets the leader key accessible in ~emacs-state~ and ~insert-state~: #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-emacs-leader-key "M-m") #+END_SRC The major mode leader key is a shortcut key which is the equivalent of pressing ~ m~. Set it to ~nil~ to disable it. Its default value is ~,~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-major-mode-leader-key ",") #+END_SRC In ~emacs-state~ and ~insert-state~, the same major mode leader key can be accessible from another shortcut, which by default is ~C-M-m~ in terminal mode, or ~M-return~ in GUI mode. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-major-mode-emacs-leader-key (if window-system "" "C-M-m")) #+END_SRC These variables control whether separate commands are bound in the GUI to the key pairs ~C-i~ and ~TAB~, and ~C-m~ and ~RET~. Setting it to a non-nil value allows for separate commands under ~C-i~ and ~TAB~, and ~C-m~ and ~RET~. In the terminal, these pairs are generally indistinguishable, so this only works in the GUI. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-distinguish-gui-tab nil) #+END_SRC ** Layouts :PROPERTIES: :CUSTOM_ID: Init-Layouts-61c0374d :END: The variable belows sets the name of the default layout. Its default value is ~"Default"~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-default-layout-name "Default") #+END_SRC If non-nil, the default layout name is displayed in the mode-line. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-display-default-layout nil) #+END_SRC If non-nil, then the last auto saved layouts are resumed automatically upon start. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-auto-resume-layouts nil) #+END_SRC If non-nil, the layout name will be auto-generated when creating new layouts. It only has an effect when using the “jump to layout by number” command. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-auto-generate-layout-names nil) #+END_SRC ** Files-related settings :PROPERTIES: :CUSTOM_ID: Init-Files-related_settings-67fba383 :END: The below value sets the size in MB above which Spacemacs will prompt to open the file literally in order to avoid preformance issues. Opening a file literally means that no major or minor mode is active. The default value is ~1~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-large-file-size 5) #+END_SRC This variable sets the location where to auto-save files. Possible values are: - ~original~ :: auto-saves files in-place - ~cache~ :: auto-saves files in another file stored in the cache directory - ~nil~ :: disables auto-saving. The default value is ~cache~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-auto-save-file-location 'original) #+END_SRC ** Emacs server :PROPERTIES: :CUSTOM_ID: Init-Emacs_server-d3947c28 :END: Emacs can be launched as a server if the following value is set to non-nil and if one isn’t already running. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-enable-server nil) #+END_SRC You can also set a custom emacs server socket location. If the value is ~nil~, Emacs will use whatever the Emacs default is, otherwise a directory path like ="$HOME/.config/emacs/server"=. It has no effect if ~dotspacemacs-enable-server~ is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-server-socket-dir nil) #+END_SRC It is also possible to tell Emacs that the quit function should keep the server open when quitting. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-persistent-server t) #+END_SRC ** Miscellaneous :PROPERTIES: :CUSTOM_ID: Init-Miscellaneous-6b4f0b76 :END: This value changes the folding method of code blocks. The possible values are either ~evil~, the default value, or ~origami~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-folding-method 'evil) #+END_SRC If non-nil, ~smartparens-strict-mode~ will be enabled in programming modes. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-smartparens-strict-mode nil) #+END_SRC If non-nil, pressing the closing parenthesis ~)~ key in insert mode passes over any automatically added closing parenthesis, bracket, quote, etc… This can temporarily disabled by pressing ~C-q~ before ~)~. The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-smart-closing-parenthesis nil) #+END_SRC List of search tool executable names. Spacemacs uses the first installed tool of the list. Supported tools are: - ~rg~ - ~ag~ - ~pt~ - ~ack~ - ~grep~ The default value is ~'("rg" "ag" "pt" "ack" "grep")~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-search-tools '("rg" "grep")) #+END_SRC Delete whitespace while saving buffer. Possible values are: - ~all~ :: aggresively delete empty lines and long sequences of whitespace - ~trailing~ :: only detele the whitespace at end of lines - ~changed~ :: to delete only whitespace for changed lines - ~nil~ :: disable cleanup The default value is ~nil~. #+BEGIN_SRC emacs-lisp (setq-default dotspacemacs-whitespace-cleanup nil) #+END_SRC et ~gc-cons-threshold~ and ~gc-cons-percentage~ when startup finishes. This is an advanced option and should not be changed unless you suspect performance issues due to garbage collection operations. The default is ~'(100000000 0.1)~ +BEGIN_SRC emacs-lisp (setq-default dotspacemacs-gc-cons '(100000000 0.1)) +END_SRC f non nil activate ~clean-aindent-mode~ which tries to correct virtual indentation of simple modes. This can interfer with mode specific indent handling like has been reported for ~go-mode~. If it does deactivate it here. Default ~t~. +BEGIN_SRC emacs-lisp (setq-default dotspacemacs-use-clean-aindent-mode t) +END_SRC f non ~nil~, shift your number row to match the entered keyboard layout (only in insert state). Currently supported keyboard layouts are ~querty-us~, ~quertz-de~ and ~querty-ca-fr~. New layouts can be added in ~spacemacs-editing~ layer. Default ~nil~. +BEGIN_SRC emacs-lisp (setq-default dotspacemacs-swap-number-row nil) +END_SRC et ~read-process-output-max~ when startup finishes. This defines how much data is read from a foreign process. Setting this >= 1 MB should increase performance for lsp servers in emacs 27. +BEGIN_SRC emacs-lisp (setq-default dotspacemacs-read-process-output-max (* 1024 1024 8)) +END_SRC * User Initialization :PROPERTIES: :header-args:emacs-lisp: :mkdirp yes :tangle ~/.config/emacs/private/user-init.el :exports code :results silent :lexical t :CUSTOM_ID: User_Initialization-e0d21089 :END: #+BEGIN_SRC emacs-lisp :exports none ;; -*- lexical-binding: t -*- #+END_SRC While Emacs and especially Spacemacs loads, I want it to initialize some elements and load some packages. First of all, I want it to load my private Emacs config file: #+BEGIN_SRC emacs-lisp (load "~/.config/emacs/private/private_emacs") #+END_SRC Then, I want a couple of requires: #+BEGIN_SRC emacs-lisp (require 'org-id) (require 'org-protocol) (require 'package) (require 'ox-latex) (require 'ox-publish) (require 'tramp) #+END_SRC I would also like to enable the setup of flycheck for Rust when Flycheck is loaded: #+BEGIN_SRC emacs-lisp (add-hook 'flycheck-mode-hook #'flycheck-rust-setup) #+END_SRC By default, Flyspell should be disabled and only enabled manually. #+BEGIN_SRC emacs-lisp (flyspell-mode 0) #+END_SRC Finally, here is a quick workaround for Tramp, sometimes it cannot connect to my hosts if I don’t have this code snippet. #+BEGIN_SRC emacs-lisp (setq tramp-ssh-controlmaster-options "-o ControlMaster=auto -o ControlPath='tramp.%%C' -o ControlPersist=no") #+END_SRC * User Configuration :PROPERTIES: :header-args:emacs-lisp: :mkdirp yes :tangle ~/.config/emacs/private/user-config.el :exports code :results silent :lexical t :CUSTOM_ID: User_Configuration-4a937fe5 :END: #+BEGIN_SRC emacs-lisp :exports none ;; -*- lexical-binding: t -*- #+END_SRC ** Custom functions, macros, and variables :PROPERTIES: :CUSTOM_ID: User_Configuration-Custom_functions-ceb4bc42 :END: In this section, I will put my various custom functions that do not fit in other sections and which are more oriented towards general usage throughout Emacs and in Elisp code. Almost all of my code snippets will be prefixed by either my name or the name of the package or layer they are part of, unless they are an explicit overwrite of a function that already exists. *** Nord theming variables :PROPERTIES: :CUSTOM_ID: User_Configuration-Custom_functions_and_variables-Some_theming_variables-9b853a99 :END: Yes, I do use a preconfigured theme, as mentioned above, but for some elements such as Eshell, I need to define some variables for color, and I’ll do it here. #+BEGIN_SRC emacs-lisp (defvar phundrak/nord0 "#2e3440") (defvar phundrak/nord1 "#3b4252") (defvar phundrak/nord2 "#434c5e") (defvar phundrak/nord3 "#4c566a") (defvar phundrak/nord4 "#d8dee9") (defvar phundrak/nord5 "#e5e9f0") (defvar phundrak/nord6 "#eceff4") (defvar phundrak/nord7 "#8fbcbb") (defvar phundrak/nord8 "#88c0d0") (defvar phundrak/nord9 "#81a1c1") (defvar phundrak/nord10 "#5e81ac") (defvar phundrak/nord11 "#bf616a") (defvar phundrak/nord12 "#d08770") (defvar phundrak/nord13 "#ebcb8b") (defvar phundrak/nord14 "#a3be8c") (defvar phundrak/nord15 "#b48ead") #+END_SRC *** ~with-face~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-with-face-7974e15f :END: ~with-face~ is a simple yet very useful macro that allows me to easily create strings with faces defined as properties to the string passed as the first argument. Here is how it is implemented: #+BEGIN_SRC emacs-lisp (defmacro with-face ($str &rest $properties) "Helper macro for creating strings with faces" `(propertize ,$str 'face (list ,@$properties))) #+END_SRC *** ~phundrak/abbr-path~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-abbr-path-559b46e3 :END: The following is a nice little function I use in my Eshell prompt. It shortens the name of all the parent directories of the current one in its path, but leaves the current one written in full. It also abbreviates the equivalent of the ~$HOME~ (~/home//~) directory to a simple =~=. #+BEGIN_SRC emacs-lisp (defun phundrak/abbr-path ($path &optional $abbreviate) "Abbreviate `$path'. If `$abbreviate' is `t', then all parent directories of the current directory will be abbreviated to one letter only. If a parent directory is a hidden directory (i.e. preceeded by a dot), the directory will be abbreviated to the dot plus the first letter of the name of the directory (e.g. \".config\" -> \".c\"). For public use of the function, `$path' should be a string representing a UNIX path. For internal use, `$path' can also be a list. If `$path' is neither of those, an error will be thrown by the function." (cond ((stringp $path) (f-short (if $abbreviate (phundrak/abbr-path (f-split (phundrak/abbr-path $path))) $path))) ((null $path) "") ((listp $path) (f-join (cond ((= 1 (length $path)) (car $path)) (t (let* ((dir (car $path)) (first-char (s-left 1 dir))) (if (string= "." first-char) (s-left 2 dir) first-char)))) (phundrak/abbr-path (cdr $path)))) (t (error "Invalid argument %s, neither stringp nor listp" $path)))) #+END_SRC *** ~phundrak/add-all-to-list~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-add-all-to-list-a8b2680d :END: #+BEGIN_SRC emacs-lisp (defun phundrak/add-all-to-list ($list &rest $elements) "Add all $elements from `$elements' to the $list `$list'. If an element from `$elements' is already part of `$list', it will be ignored." (dolist ($e $elements) (unless (member $e $list) (add-to-list '$list $e))) $list) #+END_SRC *** ~phundrak/blog-publish~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-blog-publish-99c96b2d :END: This function is quite a simple function made to automatically publish [[https://blog.phundrak.com][my blog]] based on Hugo. After exporting my blog using ~ox-hugo~, I simply have to call this function which will look for all files located in =~/org/blog/public= and copy them to my remote server once ~hugo~ has been executed in =~/org/blog=. #+BEGIN_SRC emacs-lisp (defun phundrak/blog-publish () (interactive) (let* ((blog-path "~/org/blog") (public-path (concat blog-path "/public")) (target-path "/rsync:Tilo:/home/phundrak/www/phundrak.com/blog")) (shell-command (format "cd %s && hugo" blog-path)) (let ((files (mapcar (lambda (file) (f-relative file public-path)) (f-files (format "%s/public" blog-path) nil t)))) (dolist (file files) (copy-file (concat public-path "/" file) (concat target-path "/" file) t nil t))))) #+END_SRC *** ~phundrak/eshell-git-status~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-eshell-git-status-28f16e94 :END: This function is used in my Eshell prompt which you can consult [[#User_Configuration-Eshell-Eshell_theme-a06715a9][here]]. This function basically executes two git calls to get some information about a git repo, which path we provide as an argument. Based on the result of these git calls, the function will know what it needs to know about the repo to build a git prompt that will be inserted in my Eshell prompt. And just for shit and giggles, I’ve made it so it is a powerline prompt. #+BEGIN_SRC emacs-lisp (defun phundrak/eshell-git-status ($path &optional $background-color) "Returns a string indicating the status of the current repository if it exists. It should also append the name of the current branch if it is not `master' or `main'. The theme is inspired by the bobthefish theme for the fish shell which you can find here: https://github.com/oh-my-fish/theme-bobthefish Color code: - green: - orange: tracked stuff is staged but not commited - red: tracked stuff is modified and not commited Symbols: - `*': dirty working dir, RED - `~': staged changes, ORANGE - `…': untracked files, GREEN - `$': stashed changes - `-': unpulled commits - `-': unpushed commits - `±': unpulled and unpushed commits" (let* ((git-status-command (concat "cd " $path "; git status")) (git-stash-status-command (concat "cd " $path "; git stash list")) (status (eshell-command-result git-status-command)) (stashstat (eshell-command-result git-stash-status-command)) (detached (s-contains? "HEAD detached" status)) (dirty (s-contains? "Changes not staged for commit" status)) (staged (s-contains? "Changes to be committed" status)) (untracked (s-contains? "Untracked files" status)) (pullable (s-contains? "git pull" status)) (pushable (s-contains? "git push" status)) (branch (replace-regexp-in-string "On Branch \$.*\$\n\$.\\|\n\$*" "\\1" status)) (branch (unless (or (string= "master" branch) (string= "main" branch) detached) branch))) (let ((prompt (concat " " (if detached ">" "") (when branch (concat " " branch " ")) (when dirty "*") (when staged "~") (when untracked "…") (cond ((and pullable pushable) "±") (pullable "-") (pushable "+")) (when stashstat "$") " ")) (accent (cond (dirty phundrak/nord11) (staged phundrak/nord13) (t phundrak/nord14))) (background (phundrak/var-or-if-nil $background-color phundrak/nord0))) (concat (with-face "" :background accent :foreground background) (with-face prompt :background accent :foreground (if dirty phundrak/nord6 background)) (with-face "" :background background :foreground accent))))) #+END_SRC *** ~phundrak/fill-paragraph~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-fill-paragraph-eb568313 :END: This function was created in order to bind to another keyboard shortcut the already existing ~C-u M-q~ which I cannot type with evil-mode unless I’m in insert mode. #+BEGIN_SRC emacs-lisp (defun phundrak/fill-paragraph () (interactive) (let* ((current-prefix-arg 4)) (call-interactively 'fill-paragraph))) #+END_SRC *** ~phundrak/find-org-files~ :PROPERTIES: :CUSTOM_ID: Custom-functions-phundrak-find-org-files-a8fd200f :END: There are lots of files which I want to be able to quickly open. I used to have one shortcut for each one of these files, but as their number grew, I decided to switch to helm for my file selector which will be called by only one common shortcut. Most of my files will be located in =~/org=, but I have some conlanging files which are located in =~/Documents/conlanging=, and all my university notes are in =~/Documents/university=. Let’s declare these directories in a variable: #+BEGIN_SRC emacs-lisp (defvar phundrak/org-directories '("~/org" "~/Documents/university" "~/Documents/conlanging") "Directories in which to look for org files with the function `phundrak/find-org-files'") #+END_SRC With this established, let’s write some emacs-lisp that will allow me to get a list of all these files and select them through helm. Be aware that I will be using some functions from third party packages, such as [[https://github.com/magnars/s.el][s.el]] and [[https://github.com/magnars/dash.el][dash]], as well as [[https://github.com/sharkdp/fd][fd]]. #+BEGIN_SRC emacs-lisp (defun phundrak/find-org-files () "Find all org files in the directories listed in `phundrak/org-directories', then list them in an ido buffer where the user can match one and open it." (interactive) (find-file (ido-completing-read "Org File:" (s-split "\n" (mapconcat (lambda (path) (shell-command-to-string (format "fd . %s -e org -c never" path))) phundrak/org-directories "\n"))))) #+END_SRC *** ~phundrak/git-repo-root~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-git-repo-root-f7cf3bb9 :END: This function detects if the path passed as an argument points to a git directory or to one of its subdirectories. If it is, it will return the path to the root of the git repository, else it will return ~nil~. #+BEGIN_SRC emacs-lisp (defun phundrak/git-repo-root ($path) "Return `$path' if it points to a git repository or one of its subdirectories" (when $path (if (f-dir? (concat $path "/.git")) $path (phundrak/git-repo-root (f-parent $path))))) #+END_SRC *** ~phundrak/prompt-toggle-abbreviation~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-prompt-toggle-abbreviation-753ca549 :END: #+BEGIN_SRC emacs-lisp (defvar phundrak/prompt--abbreviate t "Whether or not to abbreviate the displayed path in the Eshell prompt") (defun phundrak/prompt-toggle-abbreviation () "Toggles whether the Eshell prompt should shorten the name of the parent directories or not. See `phundrak/eshell-prompt'" (interactive) (setq phundrak/prompt--abbreviate (not phundrak/prompt--abbreviate))) #+END_SRC *** ~phundrak/open-marked-files~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-open-marked-files-b87d37f7 :END: This function is particularly useful in Dired buffers when someone wants to open multiple files. This function will basically look for all marked files in the current dired buffer and open each one of them in their individual buffer. #+BEGIN_SRC emacs-lisp (defun phundrak/open-marked-files () (interactive) (let ((file-list (if (string= major-mode "dired-mode") (dired-get-marked-files) (list (buffer-file-name))))) (mapc (lambda (file) (find-file file)) file-list))) #+END_SRC *** ~phundrak/var-or-if-nil~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-phundrak-var-or-if-nil-40e2e54a :END: This simple function helps me return either the value ~var~ holds, or if it is ~nil~ it will return the value ~value~ holds (or will return). #+BEGIN_SRC emacs-lisp (defun phundrak/var-or-if-nil ($var $value) "Return the result yield by `$value' if `$var' is `nil', return `$var' otherwise" (if (null $var) $value $var)) #+END_SRC *** ~phundrak/yas-rust-new-assignments~ :PROPERTIES: :CUSTOM_ID: Custom-functions-yas-rust-new-assignments-4ad16bde :END: The following function is a function that will allow me to easily create ~new~ functions for Rust structs. Inspired from [[https://github.com/jorgenschaefer/elpy][elpy]]’s ~elpy-snippet-init-assignments~ function, it will automatically write assignments to my new struct as I write new parameters in the ~new~ function. It also comes with a helper function that parses the arguments given to the ~new~ function. #+BEGIN_SRC emacs-lisp (defun phundrak//yas-snippet-split-rust-args ($arg-string) "Split a Rust argument string into ((name, default)...) tuples" (mapcar (lambda ($elem) (split-string $elem "[[:blank:]]*:[[:blank:]]*" t)) (split-string $arg-string "[[:blank:]]*,[[:blank:]]*" t))) (defun phundrak/yas-rust-new-assignments ($arg-string) "Return a typical new assignment for arguments. Inspired from elpy’s functions https://github.com/jorgenschaefer/elpy" (let ((indentation (make-string (save-excursion (goto-char start-point) (current-indentation)) ?\s))) (mapconcat (lambda ($elem) (if (string-match "^\\*" (car $elem)) "" (format "%s,\n%s" (car $elem) indentation))) (phundrak//yas-snippet-split-rust-args $arg-string) ""))) #+END_SRC *** ~screenshot-svg~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-screenshot-svg-9e2e21d2 :END: This function allows for taking SVG screenshots of Emacs from itself using Cairo. The function definition was taken [[https://github.com/caiohcs/my-emacs#screenshots][from here]]. #+BEGIN_SRC emacs-lisp (defun screenshot-svg () "Save a screenshot of the current frame as an SVG image. Saves to a temp file and puts the filename in the kill ring." (interactive) (let* ((filename (make-temp-file "Emacs" nil ".svg")) (data (x-export-frames nil 'svg))) (with-temp-file filename (insert data)) (kill-new filename) (message filename))) #+END_SRC *** ~terminal-here-default-terminal-command~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-terminal-here-default-terminal-command-9baa3715 :END: This function is actually an overwrite of the default one which apparently does not work on my machine. This function is called by ~terminal-here-launch~ and spawns an external terminal emulator in the directory emacs was in when the terminal was invoked. I simply point out to this function the name of my terminal emulator. Here is the code: #+BEGIN_SRC emacs-lisp (defun terminal-here-default-terminal-command (_dir) '("st")) #+END_SRC *** ~xah/dired-sort~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-xah-dired-sort-28bde838 :END: This function comes directly from Xah Lee’s website and allows the user to sort files in a dired buffer depending on four factors: * File name * File size * Last modification date * File extension #+BEGIN_SRC emacs-lisp (defun xah/dired-sort () "Sort dired dir listing in different ways. Prompt for a choice. URL `http://ergoemacs.org/emacs/dired_sort.html' Version 2018-12-23, modified by Phundrak on 2019-08-06" (interactive) (let ($sort-by $arg) (setq $sort-by (ido-completing-read "Sort by:" '( "name" "size" "date" "extension" ))) (cond ((equal $sort-by "name") (setq $arg "-ahl --group-directories-first")) ((equal $sort-by "date") (setq $arg "-ahl -t --group-directories-first")) ((equal $sort-by "size") (setq $arg "-ahl -S --group-directories-first")) ((equal $sort-by "extension") (setq $arg "-ahlD -X --group-directories-first")) (t (error "logic error 09535" ))) (dired-sort-other $arg ))) #+END_SRC *** ~xah/open-in-external-app~ :PROPERTIES: :CUSTOM_ID: User-Configuration-Custom-functions-macros-and-variables-xah-open-in-external-app-2655f31c :END: Here is another of Xah’s functions, this time to open a file externally to Emacs. For instance, I sometimes want to open a PDF in Zathura rather than in Emacs, or an HTML file in Firefox. With this function, it is now possible! #+BEGIN_SRC emacs-lisp (defun xah/open-in-external-app (&optional files) "Open the current file or dired marked file in external app. The app is chosen from your OS’ preference. When called in emacs lisp, if files is given, open that. URL `http://ergoemacs.org/emacs/emacs_dired_open_file_in_ext_apps.html' Version 2019-01-18" (interactive) (let* (($file-list (if files (progn (list files)) (if (string-equal major-mode "dired-mode") (dired-get-marked-files) (list (buffer-file-name))))) ($do-it-p (if (<= (length $file-list) 5) t (y-or-n-p "Open more than 5 files? ")))) (when $do-it-p (mapc (lambda ($fpath) (let ((process-connection-type nil)) (start-process "" nil "xdg-open" $fpath))) $file-list)))) #+END_SRC ** Emacs builtins :PROPERTIES: :CUSTOM_ID: User_Configuration-Emacs_builtins-7822b8dd :END: *** Dired :PROPERTIES: :CUSTOM_ID: User_Configuration-Dired-ef8a7cac :END: When it comes to dired, I chose do modify some elements on how things are sorted and shown, but there isn’t much configuration. First, I want to always copy folders in a recursive way, no questions asked. #+BEGIN_SRC emacs-lisp (setq dired-recursive-copies 'always) #+END_SRC Also, when I have two Dired buffers opened side by side, I generally want them to interact with each other, for example if I want to move around or copy stuff. So, let’s tell Emacs that: #+BEGIN_SRC emacs-lisp (setq dired-dwim-target t) #+END_SRC Finally, let’s tell Dired how to sort the elements to be displayed: directories first, non-hidden first. #+BEGIN_SRC emacs-lisp (setq dired-listing-switches "-ahl --group-directories-first") #+END_SRC By the way, let’s enable ~org-download~ when we are in a Dired buffer: #+BEGIN_SRC emacs-lisp (add-hook 'dired-mode-hook 'org-download-enable) #+END_SRC Finally, let’s enable globally ~diredfl~ so we can get a colourful Dired buffer each time we open one: #+BEGIN_SRC emacs-lisp (diredfl-global-mode 1) #+END_SRC *** Eshell :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-3012e67e :END: Eshell is a built-in shell available from Emacs which I use almost as often as Fish. Some adjustments are necessary for making this shell usable for me. But first, here is a screenshot of what to expect visually from my configuration of Eshell when it is launched: #+include: ./img/eshell.svg export html **** Aliases :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Aliases-ef06615f :END: This function is a function that will come in very handy for Eshell functions that call shell processes. It concatenates the initial string ~command~ with all the arguments ~args~, each separated with a space. #+BEGIN_SRC emacs-lisp (defun phundrak/concatenate-shell-command ($command &rest $args) (string-join (cons $command $args) " ")) #+END_SRC Just like most shells, it is possible to declare in Eshell aliases. First, I would like to be able to use ~open~ to open files in Emacs: #+BEGIN_SRC emacs-lisp (defalias 'open 'find-file) #+END_SRC I also have ~openo~ which allows me to perform the same action, but in another window: #+BEGIN_SRC emacs-lisp (defalias 'openo 'find-file-other-window) #+END_SRC The function ~yes-or-no-p~ is also aliased to ~y-or-n-p~ so I only have to answer by ~y~ or ~n~ instead of typing ~yes~ or ~no~. #+BEGIN_SRC emacs-lisp (defalias 'yes-or-no-p 'y-or-n-p) #+END_SRC For some ease of use, I’ll also declare ~list-buffers~ as an alias of ~ibuffer~. #+BEGIN_SRC emacs-lisp (defalias 'list-buffers 'ibuffer) #+END_SRC ~mkcd~ is a function that allows me to create a directory and ~cd~ into it at the same time. #+begin_src emacs-lisp (defun eshell/mkcd ($directory) (eshell/mkdir "-p" $directory) (cd $directory)) #+end_src **** Custom functions :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Custom_functions-79d98245 :END: When I’m in Eshell, sometimes I wish to open multiple files at once in Emacs. For this, when I have several arguments for ~find-file~, I want to be able to open them all at once. Let’s modify ~find-file~ like so: #+BEGIN_SRC emacs-lisp (defadvice find-file (around find-files activate) "Also find all files within a list of files. This even works recursively." (if (listp filename) (cl-loop for f in filename do (find-file f wildcards)) ad-do-it)) #+END_SRC I also want to be able to have multiple instances of Eshell opened at once. For that, I declared the function ~eshell-new~ that does exactly that. #+BEGIN_SRC emacs-lisp (defun eshell-new() "Open a new instance of eshell." (interactive) (eshell 'N)) #+END_SRC ***** Redirect text editors to Emacs :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Custom_functions-Redirect_text_editors_to_Emacs-dff362c6 :END: I still have some stupid muscle memory telling me to open ~emacs~ in the terminal, which is stupid with Eshell since I’m already inside Emacs. So, let’s open each file passed to the ~emacs~ command and bury the eshell buffer (we’ll get back to it later). #+BEGIN_SRC emacs-lisp (defun eshell/emacs (&rest $files) "Open a file in a new buffer. Old habits die hard" (if $files (mapc #'find-file (mapcar #'expand-file-name (eshell-flatten-list (reverse $files)))) (bury-buffer))) #+END_SRC **** Environment variables :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Environment_variables-8dac73e0 :END: Some environment variables need to be correctly set so Eshell can correctly work. The first environment variable to be set is the ~PATH~, as I have a couple of directories where executables are located. Let’s add them to our path. #+BEGIN_SRC emacs-lisp (setenv "PATH" (concat (getenv "HOME") "/.pub-cache/bin" ":" (getenv "HOME") "/.local/bin" ":" (getenv "HOME") "/go/bin" ":" (getenv "HOME") "/.cargo/bin" ":" (getenv "HOME") "/.gem/ruby/2.6.0/bin" ":" (getenv "PATH"))) #+END_SRC I would also like to set two environment variables related to Dart development: the ~DART_SDK~ and ~ANDROID_HOME~ variables. #+BEGIN_SRC emacs-lisp (setenv "DART_SDK" "/opt/dart-sdk/bin") (setenv "ANDROID_HOME" (concat (getenv "HOME") "/Android/Sdk/")) #+END_SRC Finally, I’d like to add a custom directory to the ~PKG_CONFIG_PATH~: #+BEGIN_SRC emacs-lisp (setenv "PKG_CONFIG_PATH" (concat "/usr/local/lib/pkgconfig/" ":" (getenv "PKG_CONFIG_PATH"))) #+END_SRC The ~EDITOR~ variable also needs to be set for git commands, especially the ~yadm~ commands. #+BEGIN_SRC emacs-lisp (setenv "EDITOR" "emacsclient -c") #+END_SRC **** Eshell banner :PROPERTIES: :CUSTOM_ID: User-Configuration-Emacs-builtins-Eshell-Eshell-banner-12d63d67 :END: The code creating the Eshell banner is a bit lengthy and requires some additional explanations that would make the following chapter [[#User_Configuration-Eshell-Eshell_theme-a06715a9][Eshell theme]] too long. So, here it is! The banner for Eshell will collect some system information and display them gracefully. These pieces of information are: - The GNU/Linux distribution running (I do not use any other OS on my computer) - The kernel name and its version - The machine’s hostname - Its uptime - Its RAM and Swap usage - How full are its mountpoints Some of these information can be grabbed directly from Emacs built-in functions, but some others need to be retrieved manually. Let’s first get into it with the mounted partitions for which we’ll define a structure: #+BEGIN_SRC emacs-lisp (cl-defstruct phundrak/mounted-partitions "Object representing a mounted partition found in the system" path size used percent) #+END_SRC We’ll also define a variable setting the maximum length of a partition path before it gets abbreviated: #+BEGIN_SRC emacs-lisp (defvar phundrak//eshell-banner--max-length-part 13 "Maximum length of a partition path") #+END_SRC Now, we can get our partitions. For this, we’ll make a call to the shell command ~df -lH~ and we’ll keep only the partitions mounted on a device stored in ~/dev~, for instance on ~/dev/sda~. And as mentioned above, if the mount path of the partition exceeds the length specified by ~phundrak//eshell-banner--max-length-part~, it will get abbreviated by [[#User-Configuration-Custom-functions-macros-and-variables-phundrak-abbr-path-559b46e3][~phundrak/abbr-path~]]. #+BEGIN_SRC emacs-lisp (defun phundrak/get-mounted-partitions () (let ((partitions (s-split "\n" (shell-command-to-string "df -lH") t))) (-keep (lambda (partition) (let* ((partition (s-split " " partition t)) (filesystem (nth 0 partition)) (size (nth 1 partition)) (used (nth 2 partition)) (percent (nth 4 partition)) (mount (nth 5 partition))) (when (s-prefix? "/dev" filesystem) (make-phundrak/mounted-partitions :path (if (> phundrak//eshell-banner--max-length-part (length mount)) mount (phundrak/abbr-path mount t)) :size size :used used :percent (string-to-number (s-chop-suffix "%" percent)))))) partitions))) #+END_SRC We’ll need some padding for the name of the information displayed on the left hand side of the banner. The maximum length without any partitions is eight characters due to the text ~Hostname~, so if any partition path is longer than this, the left padding will increase. #+BEGIN_SRC emacs-lisp (defun phundrak//eshell-banner--get-left-pad (initial-pad partitions) (if partitions (let ((part-length (length (phundrak/mounted-partitions-path (car partitions))))) (phundrak//eshell-banner--get-left-pad (if (> part-length initial-pad) part-length initial-pad) (cdr partitions))) initial-pad)) #+END_SRC Now, Let’s set three variables that will be used in the function following this declaration. They will be used to determine in which color a percentage should be displayed. I’ll consider any percentage below 60% to be acceptable and therefore displayed in green. However, starting from this threshold, I want the user to be noticed of the usage of whatever percentage shown that it has gone up and it should be watched and displayed in yellow. Above 75%, the user should consider this a warning, and the percentage will be displayed in orange. Above 90%, it is considered critical and the percentage will be displayed in red. #+BEGIN_SRC emacs-lisp (defvar phundrak//eshell-banner--critical-percentage 90) (defvar phundrak//eshell-banner--warning-percentage 75) (defvar phundrak//eshell-banner--notice-percentage 60) (defun phundrak//eshell-banner--color-percentage (percentage) (cond ((> percentage phundrak//eshell-banner--critical-percentage) (with-face (format "%2d" percentage) :foreground phundrak/nord11)) ((> percentage phundrak//eshell-banner--warning-percentage) (with-face (format "%2d" percentage) :foreground phundrak/nord12)) ((> percentage phundrak//eshell-banner--notice-percentage) (with-face (format "%2d" percentage) :foreground phundrak/nord13)) (t (with-face (format "%2d" percentage) :foreground phundrak/nord14)))) #+END_SRC This function will be used when displaying progress bars. These will be used for displaying the Ram, Swap and partitions usage of the system, displaying the used part in red and the free part in green. For this, we just need to know the size of the progress bar we wish to use as well as how full it should be. Note that the percentage should be between 0 and 100. #+BEGIN_SRC emacs-lisp (defun phundrak//eshell-banner--progress-bar (length percentage) (let* ((length-green (if (= 0 percentage) 0 (/ (* length percentage) 100))) (length-red (- length length-green))) (concat (with-face "[" :weight 'bold) (with-face (s-repeat length-green "=") :weight 'bold :foreground phundrak/nord14) (with-face (s-repeat length-red "=") :weight 'bold :foreground phundrak/nord11) (with-face "]" :weight 'bold)))) #+END_SRC This function will be used in two distinct functions: ~phundrak/eshell-banner~ which we will see later, and ~phundrak//eshell-banner--display-memory~ which we will see now. This function displays information for the two types of memory we have, RAM and Swap memory. Here is the definition of this function: #+BEGIN_SRC emacs-lisp (defun phundrak//eshell-banner--display-memory (type used total text-padding ramp-length) (let ((percentage (if (= used 0) 0 (/ (* 100 used) total)))) (concat (s-pad-right text-padding "." type) ": " (phundrak//eshell-banner--progress-bar ramp-length percentage) (format " %6s / %-5s (" (file-size-human-readable used) (file-size-human-readable total)) (phundrak//eshell-banner--color-percentage percentage) "%)\n"))) #+END_SRC We now need a function for displaying partitions. As you can see, it will be quite similar to the above one: #+BEGIN_SRC emacs-lisp (defun phundrak//eshell-banner--display-partition (part left-pad ramp-length) (concat (s-pad-right left-pad "." (with-face (phundrak/mounted-partitions-path part) :weight 'bold)) ": " (phundrak//eshell-banner--progress-bar ramp-length (phundrak/mounted-partitions-percent part)) (format " %6s / %-5s (%s%%)" (phundrak/mounted-partitions-used part) (phundrak/mounted-partitions-size part) (phundrak//eshell-banner--color-percentage (phundrak/mounted-partitions-percent part))))) #+END_SRC And we can now build our banner! Here is our function that does exactly that: #+BEGIN_SRC emacs-lisp (defun phundrak/eshell-banner () (let* ((partitions (phundrak/get-mounted-partitions)) (memory (-map (lambda (line) (s-split " " line t)) (s-split "\n" (shell-command-to-string "free -b | tail -2") t))) (ram (nth 0 memory)) (swap (nth 1 memory)) (ramp-length 41) (left-pad (phundrak//eshell-banner--get-left-pad phundrak//eshell-banner--max-length-part partitions)) (right-pad 8) (left-column-width 27)) (concat (format "%s\n" (s-repeat 79 "=")) ;; OS and Kernel (format "%s: %s%s: %s\n" (s-pad-right left-pad "." "OS") (s-pad-right left-column-width " " (with-face (s-replace "\"" "" (s-trim (shell-command-to-string "lsb_release -sd"))) :weight 'bold)) (s-pad-right right-pad "." "Kernel") (with-face (concat "Linux " operating-system-release) :weight 'bold)) ;; Hostname and Uptime (format "%s: %s%s: %s\n" (s-pad-right left-pad "." "Hostname") (s-pad-right left-column-width " " (with-face (system-name) :weight 'bold)) (s-pad-right right-pad "." "Uptime") (with-face (s-chop-prefix "up " (s-trim (shell-command-to-string "uptime -p"))) :weight 'bold)) ;; RAM ramp (phundrak//eshell-banner--display-memory "Ram" (string-to-number (nth 2 ram)) (string-to-number (nth 1 ram)) left-pad ramp-length) ;; SWAP ramp (phundrak//eshell-banner--display-memory "Swap" (string-to-number (nth 2 swap)) (string-to-number (nth 1 swap)) left-pad ramp-length) ;; Partitions (mapconcat (lambda (part) (phundrak//eshell-banner--display-partition part left-pad ramp-length)) partitions "\n") (format "\n%s\n" (s-repeat 79 "="))))) #+END_SRC We now only have to set the result of this function as our Eshell banner. Since a simple ~setq~ would only run ~phundrak/eshell-banner~ once when Emacs starts, we’ll actually make Emacs set the value of ~eshell-banner-message~ each time it is required by Eshell with a hook: #+BEGIN_SRC emacs-lisp (add-hook 'eshell-banner-load-hook (lambda () (setq eshell-banner-message (phundrak/eshell-banner)))) #+END_SRC **** Eshell theme :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Eshell_theme-a06715a9 :END: As with most shells, again, it is possible to customize the appearance of the Eshell prompt. As you can see, my prompt has some Nord colors, a shortened path, a git prompt, and an indicator of whether the previous command succeeded or failed. Note however that the abbreviation of the current path depends on the value of ~phundrak/prompt--abbreviate~, if it is ~t~ it is abbreviated; otherwise, it is kept in full. It can be toggled with a keyboard shortcut, see [[#User_Configuration-Shortcuts-Toggle-d53c27ef][Keybindings: Toggle]]. #+BEGIN_SRC emacs-lisp (defun phundrak/eshell-prompt () "Definition of my prompt for Eshell It displays a powerline prompt, with first an abbreviated path to the current directory. If `phundrak/prompt--abbreviate' is `t', then all preceding directories will be abbreviated to one character, except hidden directory which first character will be preceded by a dot. Otherwise, the full name of the directories is displayed. Then, if the current directory is a git repository or one of its subdirectories, it will display the current state of the repository. See `phundrak/eshell-git-status' Finally, a lambda character is displayed, either in blue or in red depending on if the last eshell command was a success or a failure respectively." (let* ((header-bg phundrak/nord0) ($path (phundrak/abbr-path (eshell/pwd))) ($git-path (phundrak/git-repo-root $path)) ($abbr-path (phundrak/abbr-path $path phundrak/prompt--abbreviate)) ($background phundrak/nord1) ($foreground phundrak/nord14) ($success phundrak/nord10) ($error phundrak/nord11)) (concat (with-face (concat " " (phundrak/abbr-path (phundrak/var-or-if-nil $git-path $path) phundrak/prompt--abbreviate) " ") :foreground $foreground :background $background) (when $git-path (concat (phundrak/eshell-git-status $path $background) (with-face (format "%s " (let (($in-git-path (phundrak/abbr-path (f-relative $path $git-path) phundrak/prompt--abbreviate))) (if (string= "." $in-git-path) "" (concat " " $in-git-path)))) :foreground $foreground :background $background))) (with-face "λ " :foreground (if (zerop eshell-last-command-status) $success $error) :background $background) (with-face "" :foreground $background) " "))) #+END_SRC Now, let’s declare our prompt regexp and our prompt functions: #+BEGIN_SRC emacs-lisp (setq eshell-prompt-regexp "^[^\n]*λ  " eshell-prompt-function 'phundrak/eshell-prompt) #+END_SRC I also don't want the banner to be displayed, I know I entered the Elisp shell, no need to remind me. Maybe I’ll do something with it one day. #+BEGIN_SRC emacs-lisp (setq eshell-banner-message "") #+END_SRC Finally, let’s enable some fish-like syntax highlighting: #+BEGIN_SRC emacs-lisp (eshell-syntax-highlighting-global-mode +1) #+END_SRC **** Visual commands :PROPERTIES: :CUSTOM_ID: User_Configuration-Eshell-Visual_commands-2b15e0dc :END: With Eshell, some commands don’t work very well, especially commands that create a TUI. So, let’s declare them as visual commands or subcommands: #+BEGIN_SRC emacs-lisp (setq eshell-visual-commands '("fish" "zsh" "bash" "tmux" "htop" "top" "vim" "bat" "nano") eshell-visual-subcommands '("git" "log" "l" "diff" "show")) #+END_SRC *** Org-mode :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-04ab8ad3 :header-args:emacs-lisp: :tangle no :exports code :results silent :END: Org-mode is probably one of the best if not the best Emacs feature I have ever discovered. It is awesome for writing documents, regardless of the format you need it to be exported to, for agenda management, and for literary programming, such as with this document. #+BEGIN_SRC emacs-lisp (with-eval-after-load 'org ;; configuration goes here ) #+END_SRC #+BEGIN_SRC emacs-lisp :tangle ~/.config/emacs/private/user-config.el :exports none :noweb yes (with-eval-after-load 'org ;; agenda <> <> ;; Babel <> <> <> <> ;; Beautiful org <> <> <> <> <> <> ;; Capture <> <> ;; Custom functions ;;;; Better IDs <> <> <> <> ;; File export <> ;;;; Latex <> <> <> <> <> ;;;; HTML <> <> ;; Latex Formats <> ;; Projects <> ;; Variables ;;;; Behavior <> <> <> <> <> <> <> ;;;; User information <> ) #+END_SRC **** Agenda :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_agenda-53f9d319 :END: One awesome feature of Org mode is the agenda. By default, my agendas are stored in =~/org/agenda=. #+NAME: org-agenda-files #+BEGIN_SRC emacs-lisp (setq org-agenda-files (list "~/org/agenda" "~/org/notes.org")) #+END_SRC I also have a custom command in Org agenda to mark some tasks as daily tasks with the =:DAILY:= tag,: #+NAME: org-agenda-custom-commands #+BEGIN_SRC emacs-lisp (setq org-agenda-custom-commands '(("h" "Daily habits" ((agenda "")) ((org-agenda-show-log t) (org-agenda-ndays 7) (org-agenda-log-mode-items '(state)) (org-agenda-skip-function '(org-agenda-skip-entry-if 'notregexp ":DAILY:")))) ("Y" "Yearly events" ((agenda "")) ((org-agenda-show-log t) (org-agenda-ndays 365) (org-agenda-log-mode-items '(state)) (org-agenda-skip-entry-if 'notregexp ":YEARLY:"))))) #+END_SRC **** Babel :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_babel_languages-c062fc16 :END: One of the amazing features of org-mode is its literary programming capacities by running code blocks from within Org-mode itself. But for that, only a couple of languages are supported directly by Org-mode itself, and they need to be activated. Here are the languages I activated in my Org-mode configuration: #+NAME: org-babel-languages-table | C | | dot | | emacs-lisp | | gnuplot | | latex | | latex-as-png | | makefile | | plantuml | | python | | sass | | scheme | | shell | | swift | #+NAME: org-babel-languages-gen #+header: :cache yes :results replace #+header: :var languages=org-babel-languages-table[,0] #+BEGIN_SRC emacs-lisp :exports none (format "'(%s)" (mapconcat (lambda ($language) (format "(%s . t)" $language)) languages "\n ")) #+END_SRC #+RESULTS[498fc46efb1de59954f758ca3d9869ea6a73dad9]: org-babel-languages-gen #+begin_src emacs-lisp '((C . t) (dot . t) (emacs-lisp . t) (gnuplot . t) (latex . t) (makefile . t) (plantuml . t) (python . t) (sass . t) (scheme . t) (shell . t) (swift . t)) #+end_src The corresponding code is as follows: #+NAME: org-babel-load-languages #+BEGIN_SRC emacs-lisp :noweb yes (org-babel-do-load-languages 'org-babel-load-languages <>) #+END_SRC Scheme requires a default implementation for geiser: #+NAME: org-babel-set-geiser #+BEGIN_SRC emacs-lisp (setq geiser-default-implementation 'racket) #+END_SRC By the way, I wish to see source code behave the same way in the source blocks as in their own major mode. Let’s tell Emacs so: #+NAME: org-src-tab-acts-natively #+BEGIN_SRC emacs-lisp (setq org-src-tab-acts-natively t) #+END_SRC Lastly, I know this can be a terrible idea, but I want Emacs to just evaluate Org code blocks without asking me. Of course, this could represent some big security issue if not careful enough, but I generaly just open my own org files. #+NAME: org-confirm-babel #+BEGIN_SRC emacs-lisp (setq org-confirm-babel-evaluate nil) #+END_SRC **** Beautify Org-mode :PROPERTIES: :CUSTOM_ID: Beautify-Org-mode-0506af2f :END: As I will always say, orgmode is an amazing piece of software that deserves particular care and love. That is why I want to give it a unique look and feel compared to the rest of my Emacs configuration, in order to make it feel much more comfortable. You will find below how my org buffers look like when I open one of them. #+begin_export html

Screenshot of an org-mode buffer

#+end_export And here you can find the source code of this buffer you just saw a screenshot of: #+BEGIN_SRC org :exports code ,#+TITLE: My Document ,#+AUTHOR: Lucien Cartier-Tilet ,#+EMAIL: lucien@phundrak.com ,#+DATE: 2020-12-21 ,#+TAGS: tag1|tag2|tag3 ,* Header 1 :PROPERTIES: :CUSTOM_ID: custom-id-for-html-export :END: # A regular comment This is an example org file, with [[https://config.phundrak.com/emacs][a link]], a {{{macro(with arguments)}}}, an <>, /text in italic/, __undelined__, *bold*, +striken through+, some ~code~ and =verbatim=, some^{superscript} and_{subscript}, a code block and a bullet list: ,#+header :export code ,#+BEGIN_SRC emacs-lisp (message "Hello World!") ,#+END_SRC ,* Element 1 ,* Element 2 | / | | | < | | This | is | a | table | |------+---------+----------+-------| | With | various | elements | | ,** TODO Global task [1/2] ,*** TODO [#A] Task 1 ,*** TODO Checkboxes [1/3] - [ ] Checkbox 1 - [X] Checkbox 2 - [ ] Checkbox 3 ,*** DONE Task 2 CLOSED: [2020-12-21 mon. 14:30] ,** Header 2 ,*** Header 3 ,**** Header 4 ,***** Header 5 ,****** Header 6 ,******* Header 7 ,******** Header 8 #+END_SRC In order to make org-mode even sexier, let’s enable ~variable-pitch-mode~ for org-mode so we can get some proportional font. I’ll also remove ~auto-fill-mode~ which seems to stick to Orgmode like hell and I don’t know why. #+NAME: beautiful-org-hooks #+BEGIN_SRC emacs-lisp (add-hook 'org-mode-hook 'visual-line-mode) (remove-hook 'org-mode-hook 'auto-fill-mode) (add-hook 'org-mode-hook 'variable-pitch-mode) (auto-fill-mode -1) #+END_SRC You can then see the modified faces for org-mode [[#User-Configuration-Visual-configuration-Better-faces-Org-mode-07754177][here]]. Some other tweaks will make Org-mode more beautiful. This includes a new folding icon, some indentation that is not added whitespace. #+NAME: beautiful-org-options #+BEGIN_SRC emacs-lisp (setq org-startup-indented t org-startup-align-all-tables t org-pretty-entities t org-fontify-whole-heading-line t org-fontify-done-headline t org-fontify-quote-and-verse-blocks t org-display-inline-images t org-redisplay-inline-images t org-startup-with-inline-images "inlineimages" org-ellipsis "  ") #+END_SRC Let’s limit the width of images inlined in org buffers to 550px. It roughly corresponds to the width of a paragraph on which ~org-fill-paragraph~ is called. #+NAME: beautiful-org-images #+BEGIN_SRC emacs-lisp (setq org-image-actual-width 550) #+END_SRC Visually, I prefer to hide the markers of macros, so let’s do that: #+NAME: beautiful-org-hide-macro-markers #+BEGIN_SRC emacs-lisp (setq org-hide-macro-markers t) #+END_SRC I also have an issue where small dots precede my org headers. Let’s fix that: #+NAME: beautiful-org-hide-dots #+BEGIN_SRC emacs-lisp (setq org-hide-leading-stars nil org-superstar-leading-bullet ?\s) #+END_SRC **** Behavior :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_variables-Org_behavior-0319db38 :END: Something really neat I learned about is the ability of org headers to inherit properties from parent headers. Let’s enable that! #+NAME: org-use-property-inheritance #+BEGIN_SRC emacs-lisp (setq org-use-property-inheritance t) #+END_SRC Sometimes, I also want to have alphabetical lists in org-mode: #+NAME: org-list-allow-alphabetical #+BEGIN_SRC emacs-lisp (setq org-list-allow-alphabetical t) #+END_SRC LSP can work in source blocks, but some work is needed (shamelessly stolen [[https://tecosaur.github.io/emacs-config/config.html#lsp-support-src][from here]], though modified a tiny bit). Here are the languages I want to activate LSP for in this environment: #+NAME: org-lsp-languages-src-blocks-table | c | | c++ | | dart | | python | | rust | #+NAME: org-lsp-languages-src-blocks-gen #+header: :cache yes :results replace #+header: :var languages=org-lsp-languages-src-blocks-table[,0] #+BEGIN_SRC emacs-lisp :exports none (mapconcat (lambda (lang) (format "\"%s\"" lang)) languages " ") #+END_SRC #+RESULTS[cbfba838da4510647d09bfd0fd2f20996c8cad38]: org-lsp-languages-src-blocks-gen : "c" "c++" "dart" "python" "rust" And here is the code to activate that: #+NAME: org-src-block-lsp #+BEGIN_SRC emacs-lisp :noweb yes (cl-defmacro lsp-org-babel-enable (lang) "Support LANG in org source code block." (setq centaur-lsp 'lsp-mode) (cl-check-type lang stringp) (let* ((edit-pre (intern (format "org-babel-edit-prep:%s" lang))) (intern-pre (intern (format "lsp--%s" (symbol-name edit-pre))))) `(progn (defun ,intern-pre (info) (let ((file-name (->> info caddr (alist-get :file)))) (unless file-name (setq file-name (make-temp-file "babel-lsp-"))) (setq buffer-file-name file-name) (lsp-deferred))) (put ',intern-pre 'function-documentation (format "Enable lsp-mode in the buffer of org source block (%s)." (upcase ,lang))) (if (fboundp ',edit-pre) (advice-add ',edit-pre :after ',intern-pre) (progn (defun ,edit-pre (info) (,intern-pre info)) (put ',edit-pre 'function-documentation (format "Prepare local buffer environment for org source block (%s)." (upcase ,lang)))))))) (defvar org-babel-lsp-lang-list '(<>)) (dolist (lang org-babel-lsp-lang-list) (eval `(lsp-org-babel-enable ,lang))) #+END_SRC Here is one behavior that I really want to see modified: the ability to use ~M-RET~ without slicing the text the marker is on. #+NAME: org-M-RET-may-split-line #+BEGIN_SRC emacs-lisp (setq org-M-RET-may-split-line nil) #+END_SRC Since Org 9.3, Org no longer attempts to restore the window configuration in the frame to which the user returns after editing a source block with ~org-edit-src-code~. This means with the original value of ~org-src-window-setup~ (~reorganize-frame~), the current frame will be split in two between the original org window and the source window, and once we quit the source window only the org window will remain. This is not a desired behavior for me, so I chose to set this variable to ~split-window-right~ in order to keep my windows organization and have a similar behavior to the old one. #+NAME: org-src-window-setup #+BEGIN_SRC emacs-lisp (setq org-src-window-setup 'split-window-below) #+END_SRC However, it is not rare that I want to change that for an horizontal split, which can be achieved with the value ~split-window-below~. Thus, I have made this function that allows me to switch between the (default) vertical split and the horizontal split. #+NAME: org-src-window-toggle #+BEGIN_SRC emacs-lisp (defun phundrak/toggle-org-src-window-split () "This function allows the user to toggle the behavior of `org-edit-src-code'. If the variable `org-src-window-setup' has the value `split-window-right', then it will be changed to `split-window-below'. Otherwise, it will be set back to `split-window-right'" (interactive) (if (equal org-src-window-setup 'split-window-right) (setq org-src-window-setup 'split-window-below) (setq org-src-window-setup 'split-window-right)) (message "Org-src buffers will now split %s" (if (equal org-src-window-setup 'split-window-right) "vertically" "horizontally"))) #+END_SRC When creating a link to an Org flie, I want to create an ID only if the link is created interactively, and only if there is no custom ID already created. #+NAME: org-id-link-to-org #+BEGIN_SRC emacs-lisp (setq org-id-link-to-org-use-id 'create-if-interactive-and-no-custom-id) #+END_SRC The tag ~:noexport:~ is fine and all, but it doesn’t allow for hidden org structures, that is headers that are visible in the org buffer but once the file is exported to another format the header disappears but its content stays. ~ox-extra~ has such a feature through ~ignore-headlines~. #+BEGIN_SRC emacs-lisp (require 'ox-extra) (ox-extras-activate '(ignore-headlines)) #+END_SRC This gives us access to the ~:ignore:~ tag which allows the behavior above mentioned. To give you an idea, the org buffer #+BEGIN_SRC org ,* Headline 1 Blah ,** Headline 2 Blah ,*** Hidden headline 3-1 :ignore: Blabla ,*** Hidden headline 3-2 :ignore: Blahblah #+END_SRC Will be exported as if it were the buffer #+BEGIN_SRC org ,* Headline 1 Blah ,** Headline 2 Blah Blabla Blahblah #+END_SRC **** Capture :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-f58979cf :header-args:org: :mkdirp yes :END: Org-capture is an amazing feature of Org-mode which allows me to quickly save links, resources, reminders, and notes in neatly organized org files. Here they are described: #+NAME: org-capture-target-files #+BEGIN_SRC emacs-lisp (defvar org-conlanging-file "~/org/conlanging.org") (defvar org-default-notes-file "~/org/notes.org") (defvar org-journal-file "~/org/journal.org") (defvar org-linguistics-notes-file "~/org/linguistics-notes.org") (defvar org-novel-notes-file "~/org/novel-notes.org") (defvar org-private-agenda-file "~/org/agenda/private.org") (defvar org-school-agenda-file "~/org/agenda/school.org") (defvar org-wordbuilding-file "~/org/worldbuilding.org") #+END_SRC With Spacemacs, an Org capture can be invoked with the shortcut ~SPC a o c~. It will then ask which template I wish to use. In the table below are described the shortcuts that are available after ~SPC a o c~ is invoked. The /name/ will be the one displayed in Org capture’s interface, the /title/ is the headline where to save the capture (if it does not differ from the capture’s name, the cell will be blank). The /insertion mode/ tells Emacs how to add the capture to the /file/, using which /template/. A line with no insertion mode, file, or template is just a category. All of the following insert entries to their org files, that is a new org node with a headline and some content. #+NAME: org-capture-shortcuts-table | Shortcut | Name | Title | Insertion mode | file | template | |----------+---------------+-----------+----------------+-------------------------+--------------------------| | e | Email | | | | | | ew | Write Email | Emails | file+headline | org-default-notes-file | emails.orgcaptmpl | | j | Journal | | file+datetree | org-journal-file | journal.orgcaptmpl | | l | Link | | | | | | ll | General | | file+headline | org-default-notes-file | link.orgcaptmpl | | ly | YouTube | | file+headline | org-default-notes-file | youtube.orgcaptmpl | | L | Protocol Link | Link | file+headline | org-default-notes-file | protocol-link.orgcaptmpl | | n | Notes | | | | | | nc | Conlanging | Note | file+headline | org-conlanging-file | notes.orgcaptmpl | | nn | General | | file+headline | org-default-notes-file | notes.orgcaptmpl | | nN | Novel | Note | file+headline | org-novel-notes-file | notes.orgcaptmpl | | nq | Quote | | file+headline | org-default-notes-file | notes-quote.orgcaptmpl | | nw | Worldbuilding | Note | file+headline | org-wordbuilding-file | notes.orgcaptmpl | | N | Novel | | | | | | Ni | Ideas | | file+headline | org-novel-notes-file | notes.orgcaptmpl | | p | Protocol | Link | file+headline | org-default-notes-file | protocol.orgcaptmpl | | r | Resources | | | | | | rc | Conlanging | Resources | file+headline | org-conlanging-file | resource.orgcaptmpl | | re | Emacs | | file+headline | org-default-notes-file | resource.orgcaptmpl | | ri | Informatique | | file+headline | org-default-notes-file | resource.orgcaptmpl | | rl | Linguistics | | file+headline | org-default-notes-file | resource.orgcaptmpl | | rL | Linux | | file+headline | org-default-notes-file | resource.orgcaptmpl | | rw | Worldbuilding | Resources | file+headline | org-wordbuilding-file | resource.orgcaptmpl | | t | Tasks | | | | | | tb | Birthday | | file+headline | org-private-agenda-file | birthday.orgcaptmpl | | te | Event | | file+headline | org-private-agenda-file | event.orgcaptmpl | | th | Health | | file+headline | org-private-agenda-file | health.orgcaptmpl | | ti | Informatique | | file+headline | org-private-agenda-file | informatique.orgcaptmpl | The following code snipped is not tangled into my configuration file, but instead creates the equivalent to the table above into EmacsLisp code found in the next code snippet. #+NAME: org-capture-shortcut-gen #+header: :exports code :cache yes :results replace #+BEGIN_SRC emacs-lisp :var table=org-capture-shortcuts-table (format "'(%s)" (mapconcat (lambda (entry) (let* ((shortcut (nth 0 entry)) (name (nth 1 entry)) (title (nth 2 entry)) (insertmode (nth 3 entry)) (fileinsert (nth 4 entry)) (sourceorg (nth 5 entry))) (if (string= "" insertmode) (format "(\"%s\" \"%s\")" shortcut name) (concat (format "(\"%s\" \"%s\" entry\n" shortcut name) (format " (%s %s%s)\n" insertmode fileinsert (if (string= "file+datetree" insertmode) "" (format " \"%s\"" (if (string= "" title) name title)))) (format " (file \"~/org/capture/%s\"))" sourceorg)))) ) table "\n ")) #+END_SRC #+RESULTS[ec10a65e789d0f3d318de419a7c08e1f41dcb65a]: org-capture-shortcut-gen #+begin_example '(("e" "Email") ("ew" "Write Email" entry (file+headline org-default-notes-file "Emails") (file "~/org/capture/emails.orgcaptmpl")) ("j" "Journal" entry (file+datetree org-journal-file) (file "~/org/capture/journal.orgcaptmpl")) ("l" "Link") ("ll" "General" entry (file+headline org-default-notes-file "General") (file "~/org/capture/link.orgcaptmpl")) ("ly" "YouTube" entry (file+headline org-default-notes-file "YouTube") (file "~/org/capture/youtube.orgcaptmpl")) ("L" "Protocol Link" entry (file+headline org-default-notes-file "Link") (file "~/org/capture/protocol-link.orgcaptmpl")) ("n" "Notes") ("nc" "Conlanging" entry (file+headline org-conlanging-file "Note") (file "~/org/capture/notes.orgcaptmpl")) ("nn" "General" entry (file+headline org-default-notes-file "General") (file "~/org/capture/notes.orgcaptmpl")) ("nN" "Novel" entry (file+headline org-novel-notes-file "Note") (file "~/org/capture/notes.orgcaptmpl")) ("nq" "Quote" entry (file+headline org-default-notes-file "Quote") (file "~/org/capture/notes-quote.orgcaptmpl")) ("nw" "Worldbuilding" entry (file+headline org-wordbuilding-file "Note") (file "~/org/capture/notes.orgcaptmpl")) ("N" "Novel") ("Ni" "Ideas" entry (file+headline org-novel-notes-file "Ideas") (file "~/org/capture/notes.orgcaptmpl")) ("p" "Protocol" entry (file+headline org-default-notes-file "Link") (file "~/org/capture/protocol.orgcaptmpl")) ("r" "Resources") ("rc" "Conlanging" entry (file+headline org-conlanging-file "Resources") (file "~/org/capture/resource.orgcaptmpl")) ("re" "Emacs" entry (file+headline org-default-notes-file "Emacs") (file "~/org/capture/resource.orgcaptmpl")) ("ri" "Informatique" entry (file+headline org-default-notes-file "Informatique") (file "~/org/capture/resource.orgcaptmpl")) ("rl" "Linguistics" entry (file+headline org-default-notes-file "Linguistics") (file "~/org/capture/resource.orgcaptmpl")) ("rL" "Linux" entry (file+headline org-default-notes-file "Linux") (file "~/org/capture/resource.orgcaptmpl")) ("rw" "Worldbuilding" entry (file+headline org-wordbuilding-file "Resources") (file "~/org/capture/resource.orgcaptmpl")) ("t" "Tasks") ("tb" "Birthday" entry (file+headline org-private-agenda-file "Birthday") (file "~/org/capture/birthday.orgcaptmpl")) ("te" "Event" entry (file+headline org-private-agenda-file "Event") (file "~/org/capture/event.orgcaptmpl")) ("th" "Health" entry (file+headline org-private-agenda-file "Health") (file "~/org/capture/health.orgcaptmpl")) ("ti" "Informatique" entry (file+headline org-private-agenda-file "Informatique") (file "~/org/capture/informatique.orgcaptmpl"))) #+end_example Below you can find the equivalent code as described above. #+NAME: org-capture-templates #+BEGIN_SRC emacs-lisp :noweb yes (setq org-capture-templates <>) #+END_SRC You may notice a capture entry for my journal, and this is due to the fact I do not use ~org-journal~ anymore: it was too overpowered for me, and I prefer to keep it simple with a single file. And as you can see, and unlike a lot of other Emacs configurations, the content of the template is not set in the variable, but in external files which can be modified freely as actual Org buffers instead of trying to get a proper one with loads of ~\n~ characters and such. All these templates are declared below. In the next sub-sections will be described my org capture templates. These are not tangled into my Emacs configuration files, but into separate ~.orgcaptmpl~ files stored into =~/org/capture/=. ***** Emails :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Emails-d87336fe :END: This is my template for a new Email: #+BEGIN_SRC org :tangle ~/org/capture/email.orgcaptmpl ,** TODO [#A] Write Email SCHEDULED: %^t :PROPERTIES: :CAPTURED: %U :END: From: Lucien Cartier-Tilet To: %^{Recipient} Subject: %^{Object} --text follows this line-- %? -- Lucien “Phundrak” Cartier-Tilet https://phundrak.com (Français) https://en.phundrak.com (English) Sent from a Free and Open-Source Linux operating system with GNU/Emacs #+END_SRC I use it in case my computer is not yet connected to the internet and I need to already write the email so I can send it later. All I will need to to afterwards will be to copy and paste my capture in a new message buffer and send it once I am back online. This is exported to =~/org/capture/email.orgcaptmpl=. ***** Journal :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Journal-9916f9bf :END: This template is quite simple: it creates a new entry with the current timestamp as its title, a brief title of my choosing, and then I can write whatever I wish to write. This is exported to =~/org/capture/journal.orgcaptmpl=. #+BEGIN_SRC org :tangle ~/org/capture/journal.orgcaptmpl ,* %U %^{Title} %? #+END_SRC ***** Notes :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Notes-4b4c10aa :END: This template is used for taking note about various subjects that can go from conlanging to development. I wrote it so I can know from where this capture was made and when, and it even supports text that was highlighted in Emacs that will be inserted in a quote block. This is exported to =~/org/capture/notes.orgcaptmpl=. #+BEGIN_SRC org :tangle ~/org/capture/notes.orgcaptmpl ,* %^{Title} :PROPERTIES: :CAPTURED: %U :END: %? #+END_SRC #+BEGIN_SRC org :tangle ~/org/capture/notes-quote.orgcaptmpl ,* %^{Title} :PROPERTIES: :CAPTURED: %U :END: Possible inspiration: ,#+begin_quote %i ,#+end_quote %? #+END_SRC ***** Protocol :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Protocol-ec45ec49 :END: This capture is used when received through org-protocol, with the Org-protocol Extension for Firefox. It allows me to save in a quote block what I’ve highlighted, as well as the link of the webpage on which my saved content was highlighted. This file is exported to =~/org/capture/protocol.orgcaptmpl=. #+BEGIN_SRC org :tangle ~/org/capture/protocol.orgcaptmpl ,* TODO [#C] %^{Title} :PROPERTIES: :CAPTURED: %U :LINK: %:link :TITLE: %:description :END: ,#+begin_quote %i ,#+end_quote %? #+END_SRC This next capture template is used only when a link is sent to Emacs and no content was highlighted. #+BEGIN_SRC org :tangle ~/org/capture/protocol-link.orgcaptmpl ,* TODO [#C] Link: %^{Title} :PROPERTIES: :CAPTURED: %U :LINK: %:link :TITLE: %:description :END: %? #+END_SRC ***** Resources :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Resources-b23bfbd0 :END: This is the default template for resources, which generally are located on the Internet. By default, I give them the lowest priority, because although this is something for me to remember later, it is not by default important. You can see in the properties I record when the capture happened, and what the link is. The title of the capture is a summary of what this is, while the body of the capture is a more detailed explanation of what I capture, why, and how it could be useful to me. #+BEGIN_SRC org :tangle ~/org/capture/resource.orgcaptmpl ,* TODO [#C] %^{Title} :PROPERTIES: :CAPTURED: %U :LINK: %^{Link} :END: %? #+END_SRC ***** Tasks :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Tasks-3fcf382a :END: ****** Computers and stuff :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Tasks-Computers_and_stuff-a4eef8e3 :END: One type of task I often capture is related to my servers or thing about computers in general. With this, I can capture a task for which I will either set a schedule or a deadline. #+BEGIN_SRC org :tangle ~/org/capture/informatique.orgcaptmpl ,* TODO %^{Title} %^{Scheduled or Deadline?||SCHEDULED||DEADLINE}: %^t :PROPERTIES: :CATEGORY: %^{Category} :END: %? #+END_SRC ****** Health :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Tasks-Health-74f8f338 :END: This capture is rarely used (I’m lucky to have a good health), but it can be useful. #+BEGIN_SRC org :tangle ~/org/capture/health.orgcaptmpl ,* %^{Title} SCHEDULED: %^t %? #+END_SRC ****** Birthdays :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Tasks-Birthdays-ec3b27be :END: This capture is used to store new birthdays I have to remember. They are set to be repeated yearly. #+BEGIN_SRC org :tangle ~/org/capture/birthday.orgcaptmpl ,* %^{Name} SCHEDULED: %^t #+END_SRC ****** Events :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Tasks-Events-7f0f8dee :END: #+BEGIN_SRC org :tangle ~/org/capture/event.orgcaptmpl ,* %^{Title} %^{Scheduled or deadline?||SCHEDULED||DEADLINE}: %^t %? #+END_SRC ***** Links :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Links-586a6b2a :END: ****** General :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Links-General-1f0732db :END: #+BEGIN_SRC org :tangle ~/org/capture/link.orgcaptmpl ,* TODO [#C] %^{Title} :PROPERTIES: :CAPTURED: %U :LINK: %^{Link} :END: %? #+END_SRC ****** YouTube :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_capture-Links-YouTube-b89fe20e :END: #+BEGIN_SRC org :tangle ~/org/capture/youtube.orgcaptmpl ,* TODO [#C] %^{Title} :PROPERTIES: :CAPTURED: %U :AUTHOR: %^{Author} :LINK: %^{Link} :END: %? #+END_SRC **** Custom org-mode functions :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Custom_org-mode_functions-f1726995 :END: We begin with a couple of custom functions that I use in my org-mode files. ***** Custom and unique headings ID :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Custom_org-mode_functions-Custom_and_unique_headings_ID-44d2beaf :END: The first ones are dedicated to provide org-mode headings a fixed and unique ID that won’t change over time. This code was taken from [[https://writequit.org/articles/emacs-org-mode-generate-ids.html][https://writequit.org/articles/emacs-org-mode-generate-ids.html]]. The first function’s job is to create these unique IDs #+NAME: org-better-id-new #+BEGIN_SRC emacs-lisp (defun eos/org-id-new (&optional prefix) "Create a new globally unique ID. An ID consists of two parts separated by a colon: - a prefix - a unique part that will be created according to `org-id-method'. PREFIX can specify the prefix, the default is given by the variable `org-id-prefix'. However, if PREFIX is the symbol `none', don't use any prefix even if `org-id-prefix' specifies one. So a typical ID could look like \"Org-4nd91V40HI\"." (let* ((prefix (if (eq prefix 'none) "" (concat (or prefix org-id-prefix) "-"))) unique) (when (equal prefix "-") (setq prefix "")) (cond ((memq org-id-method '(uuidgen uuid)) (setq unique (org-trim (shell-command-to-string org-id-uuid-program))) (unless (org-uuidgen-p unique) (setq unique (org-id-uuid)))) ((eq org-id-method 'org) (let* ((etime (org-reverse-string (org-id-time-to-b36))) (postfix (when org-id-include-domain (progn (require 'message) (concat "@" (message-make-fqdn)))))) (setq unique (concat etime postfix)))) (t (error "Invalid `org-id-method'"))) (concat prefix (car (split-string unique "-"))))) #+END_SRC Now, let’s see the function that will be used to get the custom id of a heading at point. If the function does not detect any custom ID, then one should be created and inserted. #+NAME: org-better-id-get #+BEGIN_SRC emacs-lisp (defun eos/org-custom-id-get (&optional pom create prefix) "Get the CUSTOM_ID property of the entry at point-or-marker POM. If POM is nil, refer to the entry at point. If the entry does not have an CUSTOM_ID, the function returns nil. However, when CREATE is non nil, create a CUSTOM_ID if none is present already. PREFIX will be passed through to `eos/org-id-new'. In any case, the CUSTOM_ID of the entry is returned." (interactive) (org-with-point-at pom (let* ((orgpath (mapconcat #'identity (org-get-outline-path) "-")) (heading (replace-regexp-in-string "[_-]+$" "" (replace-regexp-in-string "[-_]+" "-" (replace-regexp-in-string "[^a-zA-Z0-9-_]" "-" (if (string= orgpath "") (org-get-heading t t t t) (concat orgpath "_" (org-get-heading t t t t))))))) (id (org-entry-get nil "CUSTOM_ID"))) (cond ((and id (stringp id) (string-match "\\S-" id)) id) (create (setq id (eos/org-id-new (concat prefix heading))) (org-entry-put pom "CUSTOM_ID" id) (org-id-add-location id (buffer-file-name (buffer-base-buffer))) id))))) #+END_SRC Finally, this is the function that gets called on file saves. If the function detects ~auto-id:t~ among the org options in the ~#+OPTIONS:~ header, then the above function is called. #+NAME: org-better-id-add-ids #+BEGIN_SRC emacs-lisp (defun eos/org-add-ids-to-headlines-in-file () "Add CUSTOM_ID properties to all headlines in the current file which do not already have one. Only adds ids if the `auto-id' option is set to `t' in the file somewhere. ie, #+OPTIONS: auto-id:t" (interactive) (save-excursion (widen) (goto-char (point-min)) (when (re-search-forward "^#\\+OPTIONS:.*auto-id:t" (point-max) t) (org-map-entries (lambda () (eos/org-custom-id-get (point) 'create)))))) #+END_SRC Let’s add a hook to the above function so it is called automatically on save, and only in read-write functions. #+NAME: org-better-id-hooks #+BEGIN_SRC emacs-lisp (add-hook 'org-mode-hook (lambda () (add-hook 'before-save-hook (lambda () (when (and (eq major-mode 'org-mode) (eq buffer-read-only nil)) (eos/org-add-ids-to-headlines-in-file)))))) #+END_SRC **** File export :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_files_exports-1e194169 :END: I want to disable by default behavior of ~^~ and ~_~ for only one character, making it compulsory to use instead ~^{}~ and ~_{}~ respectively. This is due to my frequent usage of the underscore in my org files as a regular character and not a markup one, especially when describing phonetics evolution. So, let’s disable it: #+NAME: org-use-sub-superscripts #+BEGIN_SRC emacs-lisp (setq org-use-sub-superscripts (quote {})) #+END_SRC ***** LaTeX :PROPERTIES: :CUSTOM_ID: User-Configuration-Emacs-builtins-Org-mode-File-export-LaTeX-92bbd6f3 :END: When it comes to exports, I want the LaTeX and PDF exports to be done with XeLaTeX only. This implies the modification of the following variable: #+NAME: org-latex-compiler #+BEGIN_SRC emacs-lisp (setq org-latex-compiler "xelatex") #+END_SRC I also want to get by default ~minted~ for LaTeX listings so I can have syntax highlights: #+NAME: org-latex-listings #+BEGIN_SRC emacs-lisp (setq org-latex-listings 'minted) #+END_SRC The default packages break my LaTeX exports: for some reasons, images are not loaded and exported in PDFs, so I needed to redifine the default packages excluding the one that broke my exports. I also added two default packages, ~minted~ and ~xeCJK~ for syntax highlighting and Japanese (and additionally Chinese and Korean) support. #+NAME: org-latex-default-packages #+BEGIN_SRC emacs-lisp (setq org-latex-default-packages-alist '(("" "graphicx" t) ("T1" "fontspec" t ("pdflatex")) ("" "longtable" nil) ("" "wrapfig" nil) ("" "rotating" nil) ("normalem" "ulem" t) ("" "amsmath" t) ("" "textcomp" t) ("" "amssymb" t) ("" "capt-of" nil) ("" "minted" nil) ("" "xeCJK" nil) ("" "hyperref" nil))) #+END_SRC By the way, reference links in LaTeX should be written in this format: #+NAME: org-export-latex-hyperref-format #+BEGIN_SRC emacs-lisp (setq org-export-latex-hyperref-format "\\ref{%s}") #+END_SRC When it comes to the export itself, the latex file needs to be processed several times through XeLaTeX in order to get some references right. Don’t forget to also run bibtex! #+NAME: org-latex-pdf-process #+BEGIN_SRC emacs-lisp (setq org-latex-pdf-process '("xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f" "bibtex %b" "xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f" "xelatex -8bit -shell-escape -interaction nonstopmode -output-directory %o %f")) #+END_SRC ***** HTML :PROPERTIES: :CUSTOM_ID: User-Configuration-Emacs-builtins-Org-mode-File-export-HTML-192cba41 :END: For Reveal.JS exports, I need to set where to find the framework by default: #+NAME: org-re-reveal-root #+BEGIN_SRC emacs-lisp (setq org-re-reveal-root "https://cdn.jsdelivr.net/npm/reveal.js") #+END_SRC On HTML exports, Org-mode tries to include a validation link for the exported HTML. Let’s disable that since I never use it. #+NAME: org-html-validation #+BEGIN_SRC emacs-lisp (setq org-html-validation-link nil) #+END_SRC **** LaTeX formats :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Custom_LaTeX_formats-8e8dca1c :END: I currently have two custom formats for my Org-mode exports: one for general use (initialy for my conlanging files, hence its ~conlang~ name), and one for beamer exports. Below is the declaration of the ~conlang~ LaTeX class: #+NAME: org-latex-class-conlang #+BEGIN_SRC emacs-lisp '("conlang" "\\documentclass{book}" ("\\chapter{%s}" . "\\chapter*{%s}") ("\\section{%s}" . "\\section*{%s}") ("\\subsection{%s}" . "\\subsection*{%s}") ("\\subsubsection{%s}" . "\\subsubsection*{%s}")) #+END_SRC And here is the declaration of the ~beamer~ class: #+NAME: org-latex-class-beamer #+BEGIN_SRC emacs-lisp `("beamer" ,(concat "\\documentclass[presentation]{beamer}\n" "[DEFAULT-PACKAGES]" "[PACKAGES]" "[EXTRA]\n") ("\\section{%s}" . "\\section*{%s}") ("\\subsection{%s}" . "\\subsection*{%s}") ("\\subsubsection{%s}" . "\\subsubsection*{%s}")) #+END_SRC Both these classes have to be added to ~org-latex-classes~ like so: #+NAME: org-latex-classes #+BEGIN_SRC emacs-lisp :noweb yes (eval-after-load "ox-latex" '(progn (add-to-list 'org-latex-classes <> ) (add-to-list 'org-latex-classes <> ))) #+END_SRC **** Projects :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_projects-5be088cd :END: Another great features of Org-mode is the Org projects that allow the user to easily publish a bunch of org files to a remote location. Here is the current declaration of my projects, which will be detailed later: #+NAME: org-publish-projects #+BEGIN_SRC emacs-lisp :noweb yes <> <> (setq org-publish-project-alist `( <> <> <> <> <> <> <>)) #+END_SRC ***** Configuration website :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_projects-Configuration_website-79bd0468 :END: This is my configuration for exporting my dotfiles to my website in a web format only. No PDFs or anything, just HTML. Please note that I do not use that often anymore, I much prefer the automatic script that I have which deploys through my Drone instance my website on git pushes. And before we get into the actual configuration, I would like to introduce a couple of variables. This is a bit more verbose than if I declared everything manually, but now I can change all three values at the same time without a hasle. #+NAME: org-proj-config-setup #+BEGIN_SRC emacs-lisp (defvar phundrak//projects-config-target "/rsync:Tilo:~/www/phundrak.com/config" "Points to where exported files for config.phundrak.com should be put") (defvar phundrak//projects-config-source "~/org/config/" "Points to where the sources for config.phundrak.com are") (defvar phundrak//projects-config-language "en" "Language of config.phundrak.com") (defvar phundrak//projects-config-recursive t "Defines whether subdirectories should be parsed for config.phundrak.com") #+END_SRC Now, here is my configuration. In this snippet, my org files located in my source directory get exported in the HTML format and published to my target directory on my remote server through RSYNC via TRAMP. A sitemap is automatically generated, which comes in handy with the online sitemap that is available through the navigation bar. #+NAME: org-proj-config-html #+BEGIN_SRC emacs-lisp ("config-website-org" :base-directory ,phundrak//projects-config-source :base-extension "org" :publishing-directory ,phundrak//projects-config-target :recursive ,phundrak//projects-config-recursive :language ,phundrak//projects-config-language :publishing-function org-html-publish-to-html :headline-levels 5 :auto-sitemap t :auto-preamble t) #+END_SRC We also have the component for all the static files needed to run the website (mostly images tbh). #+NAME: org-proj-config-static #+BEGIN_SRC emacs-lisp ("config-website-static" :base-directory ,phundrak//projects-config-source :base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub\\|md" :publishing-directory ,phundrak//projects-config-target :recursive ,phundrak//projects-config-recursive :language ,phundrak//projects-config-language :publishing-function org-publish-attachment) #+END_SRC The project is then defined like so: #+NAME: org-proj-config #+BEGIN_SRC emacs-lisp ("config-website" :components ("config-website-org" "config-website-static")) #+END_SRC ***** Linguistics website :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_projects-Linguistics_website-34b8d4e7 :END: My linguistics website is made out of three projects. As for the previous project, let’s declare the common values for these. #+NAME: org-proj-lang-setup #+BEGIN_SRC emacs-lisp (defvar phundrak//projects-conlanging-target "/rsync:Tilo:~/www/phundrak.com/langue/" "Points to where exported files for langue.phundrak.com should be put") (defvar phundrak//projects-conlanging-source "~/Documents/conlanging/content/" "Points to where the sources for langue.phundrak.com are") (defvar phundrak//projects-conlanging-language "fr" "Language of langue.phundrak.com") (defvar phundrak//projects-conlanging-recursive t "Defines whether subdirectories should be parsed for langue.phundrak.com") #+END_SRC The first component is the one generating the HTML files from the org files. #+NAME: org-proj-lang-html #+BEGIN_SRC emacs-lisp ("langue-phundrak-com-org" :base-directory ,phundrak//projects-conlanging-source :base-extension "org" :exclude "\\./\$CONTRIB\\|README\\|head\\|temp\\|svg-ink\$.*" :publishing-directory ,phundrak//projects-conlanging-target :recursive ,phundrak//projects-conlanging-recursive :language ,phundrak//projects-conlanging-language :publishing-function org-html-publish-to-html :headline-levels 5 :auto-sitemap t :auto-preamble t) #+END_SRC We also have the component for the LaTeX and PDF part of the website: #+NAME: org-proj-lang-pdf #+BEGIN_SRC emacs-lisp ("langue-phundrak-com-pdf" :base-directory ,phundrak//projects-conlanging-source :base-extension "org" :exclude "\\./\$CONTRIB\\|README\\|index\\|head\\|temp\\|svg-ink\$.*" :publishing-directory ,phundrak//projects-conlanging-target :recursive ,phundrak//projects-conlanging-recursive :language ,phundrak//projects-conlanging-language :publishing-function org-latex-publish-to-pdf :headline-levels 5 :auto-preamble t) #+END_SRC And lastly, we have the component for all the static files needed to run the website: #+NAME: org-proj-lang-static #+BEGIN_SRC emacs-lisp ("langue-phundrak-com-static" :base-directory ,phundrak//projects-conlanging-source :base-extension "png\\|jpg\\|gif\\|webp\\|svg\\|jpeg\\|ttf\\|woff\\|txt\\|epub" :publishing-directory ,phundrak//projects-conlanging-target :recursive ,phundrak//projects-conlanging-recursive :language ,phundrak//projects-conlanging-language :publishing-function org-publish-attachment) #+END_SRC The project is then defined like so: #+NAME: org-proj-lang #+BEGIN_SRC emacs-lisp ("langue-phundrak-com" :components ("langue-phundrak-com-org" "langue-phundrak-com-static" "langue-phundrak-com-pdf")) #+END_SRC **** User information :PROPERTIES: :CUSTOM_ID: User_Configuration-Org-mode-Org_variables-User_information-6c7d5e3f :END: Some variables about myself need to be set so Org-mode knows what information to include in exported files. #+NAME: org-user-information #+BEGIN_SRC emacs-lisp (setq user-full-name "Lucien Cartier-Tilet" user-real-login-name "Lucien Cartier-Tilet" user-login-name "phundrak" user-mail-address "lucien@phundrak.com") #+END_SRC ** Editing and modes :PROPERTIES: :CUSTOM_ID: User_Configuration-Editing_and_modes-7dbaf258 :END: *** Default modes :PROPERTIES: :CUSTOM_ID: User_Configuration-Editing_and_modes-Default_modes-50d4e086 :END: Some buffers sometimes won’t have a default mode at all, such as the ~*scratch*~ buffer. In any vanilla configuration, they will then default to ~text-mode~. I personally prefer ~org-mode~ to be my default mode, so let’s set it so! #+BEGIN_SRC emacs-lisp (setq edit-server-default-major-mode 'org-mode) #+END_SRC *** Evil :PROPERTIES: :CUSTOM_ID: User_Configuration-Editing_and_modes-Evil-3cedaaee :END: As a user of Evil, I’m sometimes pissed when I accidentally press ~C-u~ and it gets me to the top of the document. So, let’s disable it: #+BEGIN_SRC emacs-lisp (setq evil-want-C-u-scroll nil) #+END_SRC *** File extensions :PROPERTIES: :CUSTOM_ID: User_Configuration-File_extensions-f76fe752 :END: Sometimes, Emacs doesn’t recognize or misrecognizes some extensions, resulting in a wrong mode set for said file. Let’s fix that by associating the extension with the desired mode: #+BEGIN_SRC emacs-lisp (dolist (e '(("xml" . web-mode) ("xinp" . web-mode) ("aiml" . web-mode) ("C" . c++-mode) ("dconf" . conf-mode) ("yy" . bison-mode) ("ll" . flex-mode) ("s" . asm-mode) ("pl" . prolog-mode) ("l" . scheme-mode) ("vs" . glsl-mode) ("fs" . glsl-mode))) (push (cons (concat "\\." (car e) "\\'") (cdr e)) auto-mode-alist)) #+END_SRC We also have a couple of extensions which should all be in ~conf-unix-mode~, let’s indicate that to Emacs: #+BEGIN_SRC emacs-lisp (dolist (e '("service" "timer" "target" "mount" "automount" "slice" "socket" "path" "netdev" "network" "link")) (push (cons (concat "\\." e "\\'") 'conf-unix-mode) auto-mode-alist)) #+END_SRC *** Hooks :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-Hooks-86da2da0 :END: I also have some hooks I use for enabling some major and minor modes. The first one here allows the execution of the deletion of trailing space each time I save a file. #+BEGIN_SRC emacs-lisp (add-hook 'before-save-hook 'delete-trailing-whitespace) #+END_SRC I also want to always be in ~visual-line-mode~ so Emacs soft-wraps lines that are too long for the buffer they are displayed in. This will also be enabled for Elfeed. #+BEGIN_SRC emacs-lisp (add-hook 'prog-mode-hook 'visual-line-mode) (add-hook 'elfeed-read-mode-hook 'visual-line-mode) #+END_SRC I also want for some non-programming modes to enable a hard-limit in terms of how many characters can fit on one line. The modes that benefit are ~message-mode~, ~org-mode~, ~text-mode~ and ~markdown-mode~. #+BEGIN_SRC emacs-lisp (mapc (lambda (x) (add-hook x 'visual-line-mode)) '(message-mode-hook text-mode-hook markdown-mode-hook)) #+END_SRC *** Twittering mode :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-Twittering_mode-b97d9327 :END: For ~twittering-mode~, a Twitter major mode for Emacs, I want to encrypt my data using a master password, which I do thanks to this option: #+BEGIN_SRC emacs-lisp (setq twittering-use-master-password t) #+END_SRC *** Wrapping regions :PROPERTIES: :CUSTOM_ID: User_Configuration-Editing_and_modes-Wrapping_regions-2250281e :END: I really like the ~M-(~ keybinding for wrapping a selected region between parenthesis. However, parenthesis are not everything (even in Lisp dialects), and other wrappers could be nice. And they are! Here is how they are declared: #+BEGIN_SRC emacs-lisp (global-set-key (kbd "M-[") 'insert-pair) (global-set-key (kbd "M-{") 'insert-pair) (global-set-key (kbd "M-<") 'insert-pair) (global-set-key (kbd "M-'") 'insert-pair) (global-set-key (kbd "M-`") 'insert-pair) (global-set-key (kbd "M-\"") 'insert-pair) #+END_SRC For the record, this is from [[http://www.howardism.org/][Howard Abram]]’s [[https://github.com/howardabrams/dot-files][dotfiles]]. ** Keybindings :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-aef3f7a7 :END: As you will see, I defined a LOT of custom keybindings. All of them are Spacemacs keybindings, defined in a way they can be used seamlessly with Evil. They almost all begin with ~o~, which is a prefix reserved for user-defined keybindings so they won’t conflict with any package. Let’s declare it like so. #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "o" "custom") #+END_SRC Now, all keybindings that will be defined can be invoked in Normal-mode with the ~SPC~ key followed by the sequence assigned to each keybinding. Before some more specialized categories, I have two commands which don’t fit into any other category that I sometime use. The first one is a fix for the Bépo keybindings which left out a keybind: ~winum-select-window-by-number~ is still bound to ~SPC ²~, which is not a key that is available on the bépo layout (instead, we use the dead key ~^~ followed by ~2~, or any digits). So instead, let’s use the key that is physically in the same place: ~$~. #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "$" "select window by number") (spacemacs/set-leader-keys "$" 'winum-select-window-by-number) #+END_SRC The following, I use it rarely, it can launch an external command from Emacs to launch, for instance, my web browser or any other software not related to Emacs. It offers a similar interface to [[https://wiki.archlinux.org/index.php/Dmenu][dmenu]] through helm. #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "or" "external command") (spacemacs/set-leader-keys "or" 'helm-run-external-command) #+END_SRC However this one I use often, generally in org or text buffers. #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "os" 'sort-lines) #+END_SRC *** Applications :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Applications-af8730b1 :END: As this is a new category, let’s declare its prefix: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "oa" "applications") #+END_SRC Now, let’s also declare the keybindings in this category. ~oac~ will invoke Emacs’ calculator, while ~oac~ invokes the calendar, ~oae~ invokes the Eww web browser, ~oaw~ invokes ~woman~ (actually ~helm-man-woman~), and ~oaW~ invokes the weather forecast. Lastly, the apostrophe in ~oa'~ will invoke Eshell directly, without any popup window as with ~,'~ while ~oan~ will open a new eshell buffer if another one already exists. #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "oa'" 'eshell "oac" 'calc "oaC" 'calendar "oae" 'eww "oan" 'eshell-new "oaw" 'helm-man-woman "oaW" 'wttrin) #+END_SRC **** Org tree slide :PROPERTIES: :CUSTOM_ID: User_Configuration-Keybindings-Applications-Org_tree_slide-29545c5e :END: Finally, here we have the keybindings for ~org-tree-slide~, a presentation mode with orgmode. Since I want the keys to be directly accessible without any prefix from Spacemacs, I’ll have to declare them the vanilla way. First we have keybindings that will launch the presentation: #+BEGIN_SRC emacs-lisp (define-key org-mode-map (kbd "") 'org-tree-slide-mode) (define-key org-mode-map (kbd "s-") 'org-tree-slide-skip-done-toggle) #+END_SRC Next, we have some additional keybindings that will only be active when in ~org-tree-slide-mode~. The first one will allow us to exit this mode, while the second one will toggle the display of headers marked as ~DONE~. Next, we have ~F9~ and ~F10~ which are bound to movement in the slide, while ~F11~ changes the way the content is displayed. We also set ~org-tree-slide-skip-outline-level~ to set the maximum depth we will display as an individual heading during the presentation. #+BEGIN_SRC emacs-lisp (when (require 'org-tree-slide nil t) (global-set-key (kbd "") 'org-tree-slide-mode) (global-set-key (kbd "S-") 'org-tree-slide-skip-done-toggle) (define-key org-tree-slide-mode-map (kbd "") 'org-tree-slide-move-previous-tree) (define-key org-tree-slide-mode-map (kbd "") 'org-tree-slide-move-next-tree) (define-key org-tree-slide-mode-map (kbd "") 'org-tree-slide-content) (setq org-tree-slide-skip-outline-level 4) (org-tree-slide-narrowing-control-profile) (setq org-tree-slide-skip-done nil)) #+END_SRC *** Comments :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Comments-508db33d :END: Some keybindings are also related to comment editing, in particular using outorg. Let’s first declare the dedicated prefix: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "oc" "comments") #+END_SRC Now, let’s declare the following keybindings: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "occ" 'outorg-copy-edits-and-exit "oce" 'outorg-edit-as-org "oco" 'outline-minor-mode) #+END_SRC ~oco~ enables the outline minor mode, which then allows for the edition of comments in org buffers with ~oce~ and saving them to the original source file with ~occ~. *** Dired :PROPERTIES: :CUSTOM_ID: User-Configuration-Keybindings-Dired-2a45af8d :END: A couple of keybindings will be added to Dired. The first one is the opening parenthesis which will enable or disable ~dired-hide-details-mode~. On the other hand, a closing parenthesis will show git information in the current Dired buffer. #+BEGIN_SRC emacs-lisp (define-key dired-mode-map (kbd "(") 'dired-hide-details-mode) (define-key dired-mode-map (kbd ")") 'dired-git-info-mode) #+END_SRC Something I use from time to time is ~S-F1~ for opening dired in my ~$HOME~ directory. For that, I simply did the following: #+BEGIN_SRC emacs-lisp (global-set-key (kbd "") (lambda () (interactive) (dired "~/"))) #+END_SRC A couple of other useful utilities, sach as opening all marked files, sorting files, opening them externally and renaming them, are also bound to a simple key press: #+BEGIN_SRC emacs-lisp (define-key dired-mode-map (kbd "f") 'phundrak/open-marked-files) (define-key dired-mode-map (kbd "F") 'xah/open-in-external-app) (define-key dired-mode-map (kbd "s") 'xah/dired-sort) #+END_SRC *** Files :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Files-206c2126 :END: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "of" "open org file") (spacemacs/set-leader-keys "of" 'phundrak/find-org-files) #+END_SRC I also have a shortcut for ~helm-locate~ in case I need to find a file that is not in these directories. One advantage of this over ~helm-find~ is that it doesn’t matter from where I call it, it will find any file on my system that matches the query, whereas ~helm-find~ will only search in the current directory and its subdirectories. This time, the declaration is much simpler: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "oF" "locate file") (spacemacs/set-leader-keys "oF" 'helm-locate) #+END_SRC And that’s it! This should list all my org files under these directories and give me fuzzy finding for these files. I just need to partially type the name of the file I want to open and it should open without any issue. *** Games :PROPERTIES: :CUSTOM_ID: User-Configuration-Keybindings-Games-c9e6ac80 :END: Just to make it easier to launch it, I’ll declare a shortcut for launching tetris (which is built into Emacs). #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "oat" "tetris") (spacemacs/set-leader-keys "oat" 'tetris) #+END_SRC Apparently, no evil keybindings are set for Tetris. Let’s declare them (adapted to the bépo layout): #+BEGIN_SRC emacs-lisp (require 'tetris) (define-key tetris-mode-map (kbd "c") 'tetris-move-left) (define-key tetris-mode-map (kbd "t") 'tetris-move-down) (define-key tetris-mode-map (kbd "s") 'tetris-rotate-prev) (define-key tetris-mode-map (kbd "r") 'tetris-move-right) #+END_SRC *** Multiple cursors :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Multiple_cursors-83db7c9c :END: I don’t really like Spacemacs’ layer for MultipleCursors, so I prefer to simply install the package and create shortcuts for it myself. Let’s first declare category: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "om" "multiple-cursors") #+END_SRC Now, let’s declare the shortcuts related to multiple-cursors: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "ome" 'mc/edit-lines "omn" 'mc/mark-next-like-this "omp" 'mc/mark-previous-like-this "oma" 'mc/mark-all-like-this) #+END_SRC *** Org-mode :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Org-mode-a8938199 :END: Now, onto some shortcuts related to org-mode. Let’s first declare the category: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix-for-mode 'org-mode "mo" "custom" "User-defined keybindings") (spacemacs/declare-prefix-for-mode 'org-mode "mot" "toggle" "Toggle org elements") (spacemacs/declare-prefix-for-mode 'org-mode "moT" "tables") #+END_SRC #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys-for-major-mode 'org-mode "ob" 'phundrak/blog-publish) (spacemacs/declare-prefix-for-mode 'org-mode "ob" "publish blog") #+END_SRC Now, I have a couple of shortcuts I use regularly: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys-for-major-mode 'org-mode "os" 'org-insert-structure-template "ots" 'phundrak/toggle-org-src-window-split "ott" 'org-sidebar-tree) (spacemacs/declare-prefix-for-mode 'org-mode "moS" "insert template") (spacemacs/declare-prefix-for-mode 'org-mode "mots" "toggle src split") #+END_SRC ~os~ allows me to insert an org structure template defined in ~org-structure-template-alist~ (see [[#User_Configuration-Org-mode-Org_variables-Org_behavior-0319db38][Org behavior]]), while ~ott~ displays the outline of the current org file. ~oT~ is the prefix for tree-related operations: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix-for-mode 'org-mode "moT" "tables") #+END_SRC These shortcuts allow to manipulate the width of the column the cursor is currently in, by either shrinking it, expanding it, or toggling its state between shrunk or expanded. A prefix for all of these commands has been also added in order to make the purpose of the shortcuts clearer. #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys-for-major-mode 'org-mode "oTt" 'org-table-toggle-column-width "oTe" 'org-table-expand "oTs" 'org-table-shrink) (spacemacs/declare-prefix-for-mode 'org-mode "moTt" "toggle width") (spacemacs/declare-prefix-for-mode 'org-mode "moTe" "expand") (spacemacs/declare-prefix-for-mode 'org-mode "moTs" "shrink") #+END_SRC Finaly, I set the following shortcut in order to easily remove ~RESULTS~ blocks from org source code blocks: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys-for-major-mode 'org-mode "or" 'org-babel-remove-result-one-or-many) (spacemacs/declare-prefix-for-mode 'org-mode "mor" "remove org result") #+END_SRC *** Toggle :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Toggle-d53c27ef :END: This category allows to toggle some modes and options. #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "ot" "toggle") #+END_SRC As you can see, I have here four shortcuts for toggling various elements in Emacs: - ~otb~ :: toggles ~fancy-battery-mode~. This comes in very handy when I am on a laptop that is not pluged in or which is charging. - ~otd~ :: toggles ~elcord-mode~. This mode is used to create an Emacs rich integration in Discord. - ~otf~ :: toggles the activation of FlyCheck, Emacs’ spell checker. It is by default disabled, and I can turn it on with this shortcut only when needed. - ~ots~ :: toggles ~prettify-symbols-mode~. This allows Emacs to replace some symbols by some others, like for example by replacing ~lambda~ in Emacs Lisp buffers with an actual λ. - ~otS~ :: toggles whether or not Eshell should shorten the current path in its prompt #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "otb" 'fancy-battery-mode "otd" 'elcord-mode "otf" 'flycheck-mode "ots" 'prettify-symbols-mode "otS" 'phundrak/prompt-toggle-abbreviation) #+END_SRC We also have some input methods-related shortcuts in a sub-category: ~oti~. The first shortcuts below are used to either toggle between no input method or the last one used (~otit~), or choose an input method among the various available ones from Emacs (~otis~). #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "oti" "input methods") (spacemacs/set-leader-keys "otit" 'toggle-input-method "otis" 'set-input-method) #+END_SRC The shortcuts below though allow me to directly switch to one of these three known input methods I sometimes or often use, namely Japanese, Tibetan and IPA (by typing in X-SAMPA). #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "otij" "Japanese") (spacemacs/declare-prefix "otix" "IPA (X-SAMPA)") (spacemacs/declare-prefix "otiT" "Tibetan") (spacemacs/set-leader-keys "otij" (lambda () (interactive) (set-input-method 'japanese)) "otix" (lambda () (interactive) (set-input-method 'ipa-x-sampa)) "otiT" (lambda () (interactive) (set-input-method 'tibetan-wylie))) #+END_SRC *** Text :PROPERTIES: :CUSTOM_ID: User_Configuration-Shortcuts-Text-8d877c4b :END: The last category is a text-related category. Let’s declare it: #+BEGIN_SRC emacs-lisp (spacemacs/declare-prefix "ox" "text") #+END_SRC The only command for now is a command that allows the use of ~C-u M-q~ with the simple shortcut ~oxf~: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys "oxf" 'phundrak/fill-paragraph) #+END_SRC ** Mu4e :PROPERTIES: :CUSTOM_ID: User_Configuration-Mu4e-f3df8e9e :END: Mu4e is a frontend for mu, an email analyzer which sits on top of a Maildir which gets updated with the ~mbsync~ command from ~isync~. It has a lot of neat features, but I guess my favorite ones are: 1. the search query feature 2. rendering an HTML email in the browser *** Setup :PROPERTIES: :CUSTOM_ID: User-Configuration-Mu4e-Setup-1d23809e :END: Due to mu sitting on top of a maildir, I need to tell mu4e where said maildir is, and point it the trash, archive, and sent folders as well as the refresh command and how frequently I want my emails to be refreshed. #+BEGIN_SRC emacs-lisp (setq mu4e-maildir "~/.mail" mu4e-trash-folder "/Trash" mu4e-refile-folder "/Archive" mu4e-sent-folder "/Sent" mu4e-drafts-folder "/Drafts" mu4e-get-mail-command "mbsync -a" mu4e-update-interval 60) #+END_SRC This source block is an example of the search queries in mu4e, and part of the reason why I very much like mu4e: these bookmarks are actually defined by search queries, but act as if they were just yet another type of custom inbox you get with modern Email client (and often you don’t even get them). All these bookmarks can be accessed through a shortcut on the main mu4e buffer, prefixed by ~b~. So, for instance, my unread messages are accessed through ~bU~. #+BEGIN_SRC emacs-lisp (setq mu4e-bookmarks `((,(s-join " " '("maildir:/Inbox" "AND NOT flag:trashed" "AND NOT to:CONLANG@LISTSERV.BROWN.EDU" "AND NOT to:AUXLANG@LISTSERV.BROWN.EDU" "AND NOT to:ateliers-emacs@framalistes.org" "AND NOT to:ateliers-paris@emacs-doctor.com" "AND NOT list:ateliers-emacs.framalistes.org" "AND NOT list:ateliers-paris.emacs-doctor.com")) "Inbox" ?i) ;; Inbox without the linguistics mailing lists (,(s-join " " '("maildir:/Inbox" "AND NOT flag:trashed" "AND (f:/.*up8\.edu|.*univ-paris8.*/" "OR c:/.*up8\.edu|.*univ-paris8.*/" "OR t:/.*up8\.edu|.*univ-paris8.*/)")) "University" ?u) ;; University-related emails (,(s-join " " '("maildir:/Inbox" "AND (to:CONLANG@LISTSERV.BROWN.EDU" "OR to:AUXLANG@LISTSERV.BROWN.EDU)")) "Linguistics" ?l) ;; linguistics mailing lists (,(s-join " " '("maildir:/Inbox" "AND (list:ateliers-emacs.framalistes.org" "OR to:ateliers-paris@emacs-doctor.com" "OR list:ateliers-paris.emacs-doctor.com)")) "Emacs" ?e) ;; Emacs mailing list ("maildir:/Sent" "Sent messages" ?s) ("flag:unread AND NOT flag:trashed" "Unread messages" ?U) ("date:today..now AND NOT flag:trashed" "Today's messages" ?t) ("date:7d..now AND NOT flag:trashed" "Last 7 days" ?w) ("date:1m..now AND NOT flag:trashed" "Last month" ?m) ("date:1y..now AND NOT flag:trashed" "Last year" ?y) ("flag:trashed AND NOT flag:trashed" "Trash" ?T) ("mime:image/* AND NOT flag:trashed" "Messages with images" ?p))) #+END_SRC On new email arrival, Emacs can send the system a notification which will be handled as any other notification received by the system and will display the number of unread emails to the user; in my case, notifications are handled by AwesomeWM. #+BEGIN_SRC emacs-lisp (setq mu4e-enable-notifications t mu4e-alert-email-notification-types '(count)) (with-eval-after-load 'mu4e-alert (mu4e-alert-set-default-style 'notifications)) (add-hook 'mu4e-view-mode-hook 'visual-line-mode) #+END_SRC This is the setup I have for my SMTP mail server: I point Emacs’ SMTP services to my private mail server on its SMTP port, which should be used with a STARTTLS stream. And I tell Emacs this is the default way to send an email. #+BEGIN_SRC emacs-lisp (setq smtpmail-smtp-server "mail.phundrak.com" smtpmail-smtp-service 587 smtpmail-stream-type 'starttls message-send-mail-function 'smtpmail-send-it) #+END_SRC *** Visual Configuration :PROPERTIES: :CUSTOM_ID: User-Configuration-Mu4e-Visual-Configuration-34f56f7e :END: The following also allows me to automatically include my signature in my Emails, to view images in my Emacs buffers and to show me the address of my contacts and not just their names. #+BEGIN_SRC emacs-lisp (setq mu4e-compose-signature-auto-include t mu4e-view-show-images t mu4e-view-prefer-html t mu4e-view-show-addresses t) #+END_SRC Now this hook is added so I can get a maximal width for the text of my emails, I really don’t like it when lines are kilometers long. I would like instead to hook ~visual-line-mode~ and ~auto-fill-mode~, but for some reasons Emacs throws an error when I add them, So I go with ~visual-fill-column-mode~ instead. #+BEGIN_SRC emacs-lisp (add-hook 'mu4e-view-mode-hook 'visual-fill-column-mode) #+END_SRC Icons are nice and all, but my current font does not display some of the default icons set by mu4e. Due to this, I will define back these icons to the original characters defined by mu4e: #+BEGIN_SRC emacs-lisp (setq mu4e-headers-draft-mark '("D" . "D") mu4e-headers-flagged-mark '("F" . "F") mu4e-headers-new-mark '("N" . "N") mu4e-headers-passed-mark '("P" . "P") mu4e-headers-replied-mark '("R" . "R") mu4e-headers-seen-mark '("S" . "S") mu4e-headers-trashed-mark '("T" . "T") mu4e-headers-attach-mark '("a" . "a") mu4e-headers-encrypted-mark '("x" . "x") mu4e-headers-signed-mark '("s" . "s") mu4e-headers-unread-mark '("u" . "u")) #+END_SRC # I also set some custom faces you can see [[#User-Configuration-Visual-configuration-Better-faces-Mu4e-7b52d940][here]]. *** Misc :PROPERTIES: :CUSTOM_ID: User-Configuration-Mu4e-Misc-9c7a4f5b :END: I am unsure yet if this has any effect on mu4e, but this variable should discourage mu4e from reading rich text emails and instead open them as plain text. However, I do not wish to discourage opening HTML emails since I can open them in the browser. #+BEGIN_SRC emacs-lisp (setq mm-discouraged-alternatives '("text/richtext")) #+END_SRC I am still unsure about this variable and if it has an effect on mu4e, but I wish to set a default web viewer for my HTML emails: w3m. This is not as effective as sending the email in the browser or rendering it as a PDF file, but it can be effective enough for some emails. #+BEGIN_SRC emacs-lisp (setq mm-text-html-renderer 'w3m) #+END_SRC ** Miscellaneous :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-d230bc2f :END: I have a lot of variables that need to be set but don’t fall in any other category, so I’ll collect them here. I have this regexp for detecting paragraphs. #+BEGIN_SRC emacs-lisp (setq paragraph-start "\f\\|[ \t]*$\\|[ \t]*[-+*] ") #+END_SRC And this variable for Elcord so the main icon displayed in Discord is the icon representing the current major-mode. I also don’t want to display the small icon, so let’s get rid of that. #+BEGIN_SRC emacs-lisp (setq elcord-use-major-mode-as-main-icon t elcord-show-small-icon nil) #+END_SRC *** Pinentry :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-Pinentry-95004d5a :END: Pinentry should use the ~loopback~ mode when communicating with GnuPG. Let’s set it so: #+BEGIN_SRC emacs-lisp (setq epg-pinentry-mode 'loopback) #+END_SRC *** Wttr.in :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-Wttr.in_cities-dd24f8c5 :END: Thanks to the wttrin package, I can get the weather forecast in Emacs for a couple of cities. I just need to specify them to Emacs like so: #+BEGIN_SRC emacs-lisp (setq wttrin-default-cities '("Aubervilliers" "Paris" "Lyon" "Nonières" "Saint Agrève")) #+END_SRC However, the package is currently broken (it was last updated in 2017): wttr.in now returns by default an HTML page instead of an ASCII result. In order to fix it, a ~?A~ must be added at the end of the request in order to get a nice output. Also, let’s use the HTTPS protocol while we’re at it. #+BEGIN_SRC emacs-lisp (defun wttrin-fetch-raw-string (query) "Get the weather information based on your QUERY." (let ((url-user-agent "curl")) (add-to-list 'url-request-extra-headers wttrin-default-accept-language) (with-current-buffer (url-retrieve-synchronously (format "http%s://wttr.in/%s?A" (if (gnutls-available-p) "s" "") query) (lambda (status) (switch-to-buffer (current-buffer)))) (decode-coding-string (buffer-string) 'utf-8)))) #+END_SRC ** Nov-mode :PROPERTIES: :CUSTOM_ID: User_Configuration-Nov-mode-6f10765d :END: ~nov-mode~ is the mode used in the Epub reader. Here I will write a little function that I will call through a hook each time I’m opening a new EPUB file. #+BEGIN_SRC emacs-lisp (defun my-nov-font-setup () (face-remap-add-relative 'variable-pitch :family "Charis SIL" :size 16 :height 1.0)) #+END_SRC Let’s bind this function to the ~nov-mode~ hook. By the way, we’ll also enable the ~visual-line-mode~ here, just in case. #+BEGIN_SRC emacs-lisp (mapc (lambda (mode) (add-hook 'nov-mode-hook mode)) '('my-nov-font-setup 'visual-line-mode)) #+END_SRC Let’s also set the maximum length of the lines in ~nov-mode~: #+BEGIN_SRC emacs-lisp (setq nov-text-width 80) #+END_SRC ** Programming :PROPERTIES: :CUSTOM_ID: User_Configuration-Programming-b4b565ae :END: *** LSP :PROPERTIES: :CUSTOM_ID: User_Configuration-LSP-4f8aa691 :END: When it comes to the LSP layer, there are some options which are not enabled by default that I want to use, especially some modes I want to take advantage of. This is why I enable first the ~lsp-treemacs-sync-mode~ so treemacs is LSP aware: #+BEGIN_SRC emacs-lisp (lsp-treemacs-sync-mode 1) #+END_SRC I also enable some layers related to ~dap~, the Debug Adapter Protocol, which works really nicely with LSP. Let’s enable Dap’s modes: #+BEGIN_SRC emacs-lisp (dap-mode 1) (dap-ui-mode 1) (dap-tooltip-mode 1) #+END_SRC Finally, I also want the documentation tooltip to show up when the cursor is above a documented piece of code or symbol. Let’s enable that too: #+BEGIN_SRC emacs-lisp (tooltip-mode 1) #+END_SRC *** ASM configuration :PROPERTIES: :CUSTOM_ID: User_Configuration-ASM_configuration-f6dc7674 :END: The first thing I will set with my ASM configuration is where the reference PDF is located. #+BEGIN_SRC emacs-lisp (setq x86-lookup-pdf "~/Documents/code/asm/Intelx86/325383-sdm-vol-2abcd.pdf") #+END_SRC I will also modify what the comment character is, from a ~;~ to a ~#~: #+BEGIN_SRC emacs-lisp (setq asm-comment-char ?\#) #+END_SRC *** C/C++ :PROPERTIES: :CUSTOM_ID: User_Configuration-C-C++-76c3f997 :END: As the C/C++ syntax is checked by flycheck, let’s make sure we are using the latest standard available, that is C++17 and C17, from Clang. #+BEGIN_SRC emacs-lisp (add-hook 'c-mode-hook (lambda () (setq flycheck-clang-language-standard "c17"))) (add-hook 'c++-mode-hook (lambda () (setq flycheck-clang-language-standard "c++17"))) #+END_SRC *** Dart configuration :PROPERTIES: :CUSTOM_ID: User_Configuration-Dart_configuration-ecf24ebf :END: For Dart, I mainly declared some custom shortcuts bound to ~dart-mode~ related to flutter, so nothing too exciting here. Some prefix are declared in order to avoid the shortcuts in helm to show up as just ~custom~. #+begin_src emacs-lisp (spacemacs/declare-prefix-for-mode 'dart-mode "mo" "user-defined") (spacemacs/declare-prefix-for-mode 'dart-mode "mof" "flutter") (spacemacs/declare-prefix-for-mode 'dart-mode "mofr" "flutter-run") #+end_src Now, for the shortcuts themselves: #+BEGIN_SRC emacs-lisp (spacemacs/set-leader-keys-for-major-mode 'dart-mode "ofH" 'flutter-hot-restart "ofh" 'flutter-hot-reload "ofq" 'flutter-quit "ofr" (lambda () (interactive) (flutter-run "-v")) "ofs" 'flutter-screenshot) #+END_SRC *** Emacs Lisp :PROPERTIES: :CUSTOM_ID: User_Configuration-Emacs_Lisp-59230f3c :END: Here will be stored my configuration directly related to Emacs Lisp, including some functions or default modes. **** Enable ~eldoc-mode~ by default :PROPERTIES: :CUSTOM_ID: User_Configuration-Emacs_Lisp-Enable_~eldoc-mode~_by_default-f131abde :END: By default, if some Elisp code is opened, I want to enable ~eldoc-mode~ so I can easily get some documentation on the symbols in the source code. This is done via the use of hooks. #+BEGIN_SRC emacs-lisp (add-hook 'prog-mode-hook 'eldoc-mode) #+END_SRC **** ~phundrak/write-to-buffer~ :PROPERTIES: :CUSTOM_ID: User_Configuration-Emacs_Lisp-~phundrak-write-to-buffer~-2f192dd3 :END: I was very surprised when I discovered no such function exists in Elisp. This function basically writes a string into a buffer, and optionally switches the user to the buffer. Here is the code for that function: #+BEGIN_SRC elisp :results silent (defun write-to-buffer ($input-string $outputbuf &optional $switchbuf) "Writes `$input-string' to the specified `output-buffer'. If `switch-buffer' is non-nil, the active buffer will switch to the output buffer; otherwise, it will take the user back to their initial buffer. Works with `$input-string' as a string or a list of strings." (let ((oldbuf (current-buffer))) (switch-to-buffer $outputbuf) (cond ((char-or-string-p $input-string) (insert $input-string)) ((listp $input-string) (dolist (elem $input-string) (insert (format "%s\n" elem))))) (unless $switchbuf (switch-to-buffer oldbuf)))) #+END_SRC *** Python :PROPERTIES: :CUSTOM_ID: User_Configuration-Python-9cdd1b06 :END: Emacs throws me an error about the python interpreter, let’s silence it: #+BEGIN_SRC emacs-lisp (setq python-shell-completion-native-disabled-interpreters '("python")) #+END_SRC *** Rust :PROPERTIES: :CUSTOM_ID: User_Configuration-Rust-ba633575 :END: I need to point to racer where the source code of Rust is located so I can get some documentation. This is installed with the ~rust-src~ component you can get through ~rustup~. To install it, simply run #+BEGIN_SRC shell :tangle no :exports code $ rustup component add rust-src #+END_SRC Now, the source code for Rust should be included in your installation. I personally prefer to develop with Rust stable, so let’s indicate to Emacs to search for documentation in the stable sources: #+BEGIN_SRC emacs-lisp (setq racer-rust-src-path "~/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src") #+END_SRC Rust’s default ~cargo check~ command is already very good, however I also enjoy getting some more hints while developping, and ~clippy~ does a very good job at it. To get clippy, I need to run the following to install it: #+BEGIN_SRC shell $ rustup compontent add clippy #+END_SRC And this will get it installed with all of my Rust toolchain, and it will be updated with it. Now, let’s indicate LSP that I want to use that instead of ~check~: #+BEGIN_SRC emacs-lisp (setq lsp-rust-analyzer-cargo-watch-command "clippy") #+END_SRC Finally, I wish to enable ~electric-pair-mode~ and ~indent-guide-mode~ for Rust files, so let’s enable that through the use of a hook: #+BEGIN_SRC emacs-lisp (add-hook 'rust-mode-hook '(lambda () (local-set-key (kbd "TAB") #'company-indent-or-complete-common) (electric-pair-mode 1) (indent-guide-mode 1))) #+END_SRC *** Scheme :PROPERTIES: :CUSTOM_ID: User_Configuration-Scheme-e35aa50a :END: The Scheme configuration will be very short, I just need to tell Emacs the name of the interpreter since it is not the default one: #+BEGIN_SRC emacs-lisp (setq geiser-chicken-binary "chicken-csi") #+END_SRC ** Projectile :PROPERTIES: :CUSTOM_ID: User_Configuration-Projectile-06e580f0 :END: Projectile is an awesome utility which helps managing projects within Emacs. It will automatically detect version controlled directories, and will by default assume this is a project I can be working on. However, there are some directories that are version controlled that I do not want to see in my list of projects, namely all the cached AUR packages from my AUR helper, ~yay~. They are all stored in the same parent directory, so let’s ignore that. I will also make Emacs ignore all ~node_modules~ directories it could encounter. And for some reason, =~/.config/emacs= is always in my projects list (I now use XDG-compliant directories), so let’s also ignore that. #+BEGIN_SRC emacs-lisp (setq projectile-ignored-projects '("~/.cache/yay" "~/.config/emacs" "/tmp")) (add-to-list 'projectile-globally-ignored-directories "node_modules") #+END_SRC ** Security :PROPERTIES: :CUSTOM_ID: User_Configuration-Security-21d88555 :END: This paragraph is about making Emacs and GPG as a whole (since Emacs is /always/ open on my computer) more secure. The first thing I want to make is a function that will close any buffer that contains an open ~.gpg~ file –I certainly do not want anyone to be able to read such files on my computer if I leave it even for a couple of minutes. #+BEGIN_SRC emacs-lisp (defun phundrak/kill-gpg-buffers () "Kill GPG buffers." (interactive) (let ((buffers-killed 0)) (dolist (buffer (buffer-list)) (with-current-buffer buffer (when (string-match ".*\.gpg$" (buffer-name buffer)) (message "Auto killing .gpg buffer '%s'" (buffer-name buffer)) (when (buffer-modified-p buffer) (save-buffer)) (kill-buffer buffer) (setq buffers-killed (+ buffers-killed 1))))) (unless (zerop buffers-killed) ;; Kill gpg-agent. (shell-command "gpgconf --kill gpg-agent") (message "%s .gpg buffers have been autosaved and killed" buffers-killed)))) #+END_SRC Notice the ~(shell-command "gpgconf --kill gpg-agent")~ command there: it kills ~gpg-agent~ which will always respawn each time GPG2 is invoked. That way, I know anyone trying to open a GPG file will have to insert my password when trying to do so instead of just hoping I entered it not long ago and they won’t have to. But surely, if I only define this function and hope to call it each time I leav my computer, surely at one point I will forget to execute it before leaving. I can’t trust myself to always call it manually. Which is why I’ll ask Emacs itself to call it after it detects a minute of idling. It may become from times to times a bit of a pain, but at least I’m now sure I won’t ever have to worry about someone reading my GPG files open in Emacs while I’m out for a quick break. #+BEGIN_SRC emacs-lisp (run-with-idle-timer 60 t 'phundrak/kill-gpg-buffers) #+END_SRC ** Snippets :PROPERTIES: :CUSTOM_ID: User_Configuration-Snippets-67a32065 :HEADER-ARGS:snippet: :padline no :mkdirp yes :END: Yasnippet’s snippets tool is extremely powerful and allows me to write very quickly code. For now, we have snippets for two modes. The files you’ll see below are exported to ~$HOME/.config/emacs/private/snippets/~ and to their respective mode directory. For instance, my ~caption~ snippet for org-mode will be exported to ~$HOME/.config/emacs/private/snippets/org-mode/caption~. Be aware that on top of these custom snippets, I also use the package [[file:awesome.org::#Autostart-f2cf42fe][yasnippet-snippets]] which provide plenty of already made snippets. *** Rust snippets :PROPERTIES: :CUSTOM_ID: User_Configuration-Snippets-Rust_snippets-b106fad4 :END: I have so far two snippets, the first one is actually just a convenience to make it easier to type a ~println!~ macro than the default snippet. #+BEGIN_SRC snippet :tangle ~/.config/emacs/private/snippets/rust-mode/println # -*- mode: snippet -*- # name: println # key: pln # -- println!("${1:{}}", $2); #+END_SRC The second one is more interesting: it is used to create a ~new~ method for a struct, and it will try to create a function that will assign each argument passed to the method to members of the struct. It relies on the custom function [[#Custom-functions-yas-rust-new-assignments-4ad16bde][I wrote here]]. #+BEGIN_SRC snippet :tangle ~/.config/emacs/private/snippets/rust-mode/new # -*- mode: snippet -*- # name: new # key: _new # -- fn new(${1:args}) -> Self { $0 Self { ${1:$(phundrak/yas-rust-new-assignments yas-text)} } } #+END_SRC *** Org headers :PROPERTIES: :CUSTOM_ID: User_Configuration-Snippets-org-mode_snippets-Org_headers-ed14fbac :END: The first two snippets are used to add HTML or LaTeX attributes to elements in org-mode. The third also has a similar usage, inserting a ~#+CAPTION~ header before an element, as well as the fourth which inserts a ~#+NAME~ header. #+BEGIN_SRC snippet :tangle ~/.config/emacs/private/snippets/org-mode/attr_html # -*- mode: snippet -*- # name: ATTR HTML # key: > ) (custom-theme-set-faces 'user <> <> )) #+END_SRC **** Mu4e :PROPERTIES: :CUSTOM_ID: User-Configuration-Visual-configuration-Better-faces-Mu4e-7b52d940 :END: The nord theme is great and all, but for some reason some faces in mu4e aren’t displayed properly, such as the ~mu4e-highlight-face~. Let’s fix that! #+tblname: mu4e-faces | / | | | | Name | background | foreground | |---------------------+-----------------+-----------------| | mu4e-highlight-face | ,phundrak/nord9 | ,phundrak/nord0 | **** Org-mode :PROPERTIES: :CUSTOM_ID: User-Configuration-Visual-configuration-Better-faces-Org-mode-07754177 :END: Fonts will play an important part in this, but so will colors and font size. The following code is largely based on the one found [[https://zzamboni.org/post/beautifying-org-mode-in-emacs/][on this blog post]] and [[https://lepisma.xyz/2017/10/28/ricing-org-mode/][this one]]. First here are some common properties that will be reused in faces below: #+tblname: org-common-faces | / | | < | | | | Name | inherit | font | height | weight | |---------+---------+---------------+--------+--------| | orgfont | | Charis SIL | 120 | | | head | default | | | bold | | fixed | | Cascadia Code | 0.8 | | #+tblname: org-faces | / | < | | | | | | | | | Name | additional | inherit | foreground | background | height | weight | italic | underline | |---------------------------+------------------+-------------------------------+------------------+-----------------+--------+--------+--------+-----------| | org-level-1 | ,@orgfont ,@head | | ,phundrak/nord15 | | 1.75 | | t | | | org-level-2 | ,@orgfont ,@head | | ,phundrak/nord10 | | 1.5 | | t | | | org-level-3 | ,@orgfont ,@head | | ,phundrak/nord9 | | 1.25 | | t | | | org-level-4 | ,@orgfont ,@head | | ,phundrak/nord15 | | 1.1 | | t | | | org-level-5 | ,@orgfont ,@head | | ,phundrak/nord8 | | | | t | | | org-level-6 | ,@orgfont ,@head | | ,phundrak/nord7 | | | | t | | | org-level-7 | ,@orgfont ,@head | | ,phundrak/nord15 | | | | t | | | org-level-8 | ,@orgfont ,@head | | ,phundrak/nord6 | | | | t | | | org-document-title | ,@orgfont ,@head | | ,phundrak/nord11 | | 2.0 | | t | | | variable-pitch | ,@orgfont | | | | | | | | | org-block | ,@fixed | | | ,phundrak/nord1 | | | | | | org-block-begin-line | ,@fixed | | | ,phundrak/nord1 | | | | | | org-block-end-line | ,@fixed | | | ,phundrak/nord1 | | | | | | org-indent | ,@fixed | | | | | | | | | org-formula | ,@fixed | | | | | | | | | org-macro | ,@fixed | | | | | | | | | org-target | ,@fixed | | | | | | | | | org-property-value | ,@fixed | | | | | | | | | org-drawer | ,@fixed | | ,phundrak/nord10 | | | | | | | org-table | ,@fixed | | ,phundrak/nord14 | | | | | | | org-date | ,@fixed | | ,phundrak/nord13 | | | | | | | org-code | ,@fixed | shadow | | | | | | | | org-verbatim | ,@fixed | shadow | | | | | | | | org-document-info-keyword | ,@fixed | shadow | | | | | | | | org-tag | ,@fixed | shadow | | | | bold | | | | org-meta-line | ,@fixed | font-lock-comment-face | | | 0.8 | | | | | org-special-keyword | ,@fixed | font-lock-comment-face | ,phundrak/nord15 | | 0.8 | | | | | org-checkbox | ,@fixed | (org-todo shadow fixed-pitch) | | | | | | | | org-document-info | | | ,phundrak/nord12 | | | | | | | org-link | | | ,phundrak/nord8 | | | | | t | *** Info colors :PROPERTIES: :CUSTOM_ID: User-Configuration-Visual-configuration-Info-colors-ebe3cc81 :END: The package ~info-colors~ adds colors to Emacs’ info mode. Let’s enable it: #+BEGIN_SRC emacs-lisp (add-hook 'Info-selection-hook 'info-colors-fontify-node) #+END_SRC *** Prettified symbols :PROPERTIES: :CUSTOM_ID: User_Configuration-Miscellaneous-Prettified_symbols-da50f4a6 :END: Just because it is pleasing to the eye, some symbols in source code get prettified into simpler symbols. Here is the list of symbols that are to be prettified. You can see in the corresponding comment what symbol will be displayed. #+BEGIN_SRC emacs-lisp (setq prettify-symbols-alist '(("lambda" . 955) ; λ ("mapc" . 8614) ; ↦ ("map" . 8614) ; ↦ (">>" . 187) ; » ("<<" . 171) ; « )) #+END_SRC Let’s enable this mode globally. #+BEGIN_SRC emacs-lisp (global-prettify-symbols-mode 1) #+END_SRC *** Misc :PROPERTIES: :CUSTOM_ID: User-Configuration-Visual-configuration-Misc-2f4ce585 :END: Emacs is already silent, but let’s set the bell as visible: #+BEGIN_SRC emacs-lisp (setq visible-bell t) #+END_SRC I would also like to disable the global ~hl-mode~, I find it quite annoying. #+BEGIN_SRC emacs-lisp (global-hl-line-mode -1) #+END_SRC * Footnotes :PROPERTIES: :CUSTOM_ID: Footnotes-5ffd05ee :END: [fn:2] [[https://labs.phundrak.com/phundrak/dotfiles/src/branch/master/.spacemacs][labs.phundrak.com/phundrak/dotfiles/src/branch/master/.spacemacs]] [fn:1] [[https://labs.phundrak.com/phundrak/dotfiles/src/branch/master/org/config/emacs.org][labs.phundrak.com/phundrak/dotfiles/src/branch/master/org/config/emacs.org]]