initial commit for new repo

2019-07-21 03:27:31 +02:00
commit de542b3e97
80 changed files with 17176 additions and 0 deletions
--- a/.config/mpv/input.conf
+++ b/.config/mpv/input.conf
@@ -0,0 +1,182 @@
+# mpv keybindings
+#
+# Location of user-defined bindings: ~/.config/mpv/input.conf
+#
+# Lines starting with # are comments. Use SHARP to assign the # key.
+# Copy this file and uncomment and edit the bindings you want to change.
+#
+# List of commands and further details: DOCS/man/input.rst
+# List of special keys: --input-keylist
+# Keybindings testing mode: mpv --input-test --force-window --idle
+#
+# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
+#
+# Strings need to be quoted and escaped:
+#   KEY show-text "This is a single backslash: \\ and a quote: \" !"
+#
+# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
+# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
+#
+# The default keybindings are hardcoded into the mpv binary.
+# You can disable them completely with: --no-input-default-bindings
+
+# Developer note:
+# On compilation, this file is baked into the mpv binary, and all lines are
+# uncommented (unless '#' is followed by a space) - thus this file defines the
+# default key bindings.
+
+# If this is enabled, treat all the following bindings as default.
+#default-bindings start
+
+#MBTN_LEFT     ignore              # don't do anything
+#MBTN_LEFT_DBL cycle fullscreen    # toggle fullscreen on/off
+#MBTN_RIGHT    cycle pause         # toggle pause on/off
+
+# Mouse wheels, touchpad or other input devices that have axes
+# if the input devices supports precise scrolling it will also scale the
+# numeric value accordingly
+#WHEEL_UP      seek 10
+#WHEEL_DOWN    seek -10
+#WHEEL_LEFT    add volume -2
+#WHEEL_RIGHT   add volume 2
+
+## Seek units are in seconds, but note that these are limited by keyframes
+#RIGHT seek  5
+#LEFT  seek -5
+#UP    seek  60
+#DOWN  seek -60
+# Do smaller, always exact (non-keyframe-limited), seeks with shift.
+# Don't show them on the OSD (no-osd).
+#Shift+RIGHT no-osd seek  1 exact
+#Shift+LEFT  no-osd seek -1 exact
+#Shift+UP    no-osd seek  5 exact
+#Shift+DOWN  no-osd seek -5 exact
+# Skip to previous/next subtitle (subject to some restrictions; see manpage)
+#Ctrl+LEFT   no-osd sub-seek -1
+#Ctrl+RIGHT  no-osd sub-seek  1
+#PGUP add chapter 1                     # skip to next chapter
+#PGDWN add chapter -1                   # skip to previous chapter
+#Shift+PGUP seek 600
+#Shift+PGDWN seek -600
+#[ multiply speed 0.9091                # scale playback speed
+#] multiply speed 1.1
+#{ multiply speed 0.5
+#} multiply speed 2.0
+#BS set speed 1.0                       # reset speed to normal
+#q quit
+Q quit-watch-later
+#q {encode} quit 4
+#ESC set fullscreen no
+#ESC {encode} quit 4
+#p cycle pause                          # toggle pause/playback mode
+#. frame-step                           # advance one frame and pause
+#, frame-back-step                      # go back by one frame and pause
+#SPACE cycle pause
+#> playlist-next                        # skip to next file
+#ENTER playlist-next                    # skip to next file
+#< playlist-prev                        # skip to previous file
+#O no-osd cycle-values osd-level 3 1    # cycle through OSD mode
+#o show-progress
+P show-progress
+#z add sub-delay -0.1                   # subtract 100 ms delay from subs
+#x add sub-delay +0.1                   # add
+#ctrl++ add audio-delay 0.100           # this changes audio/video sync
+#ctrl+- add audio-delay -0.100
+#9 add volume -2
+/ add volume -2
+#0 add volume 2
+* add volume 2
+m cycle mute
+#1 add contrast -1
+#2 add contrast 1
+#3 add brightness -1
+#4 add brightness 1
+#5 add gamma -1
+#6 add gamma 1
+#7 add saturation -1
+#8 add saturation 1
+#Alt+0 set window-scale 0.5
+#Alt+1 set window-scale 1.0
+#Alt+2 set window-scale 2.0
+# toggle deinterlacer (automatically inserts or removes required filter)
+#d cycle deinterlace
+#r add sub-pos -1                       # move subtitles up
+#t add sub-pos +1                       #                down
+#v cycle sub-visibility
+# stretch SSA/ASS subtitles with anamorphic videos to match historical
+#V cycle sub-ass-vsfilter-aspect-compat
+# switch between applying no style overrides to SSA/ASS subtitles, and
+# overriding them almost completely with the normal subtitle style
+#u cycle-values sub-ass-override "force" "no"
+#j cycle sub                            # cycle through subtitles
+#J cycle sub down                       # ...backwards
+#SHARP cycle audio                      # switch audio streams
+#_ cycle video
+#T cycle ontop                          # toggle video window ontop of other windows
+#f cycle fullscreen                     # toggle fullscreen
+#s async screenshot                     # take a screenshot
+#S async screenshot video               # ...without subtitles
+#Ctrl+s async screenshot window         # ...with subtitles and OSD, and scaled
+#Alt+s screenshot each-frame            # automatically screenshot every frame
+#w add panscan -0.1                     # zoom out with -panscan 0 -fs
+#e add panscan +0.1                     #      in
+# cycle video aspect ratios; "-1" is the container aspect
+#A cycle-values video-aspect "16:9" "4:3" "2.35:1" "-1"
+#POWER quit
+#PLAY cycle pause
+#PAUSE cycle pause
+#PLAYPAUSE cycle pause
+#STOP quit
+#FORWARD seek 60
+#REWIND seek -60
+#NEXT playlist-next
+#PREV playlist-prev
+#VOLUME_UP add volume 2
+#VOLUME_DOWN add volume -2
+#MUTE cycle mute
+#CLOSE_WIN quit
+#CLOSE_WIN {encode} quit 4
+#E cycle edition                        # next edition
+#l ab-loop                              # Set/clear A-B loop points
+#L cycle-values loop-file "inf" "no"    # toggle infinite looping
+#ctrl+c quit 4
+
+# Apple Remote section
+#AR_PLAY cycle pause
+#AR_PLAY_HOLD quit
+#AR_CENTER cycle pause
+#AR_CENTER_HOLD quit
+#AR_NEXT seek 10
+#AR_NEXT_HOLD seek 120
+#AR_PREV seek -10
+#AR_PREV_HOLD seek -120
+#AR_MENU show-progress
+#AR_MENU_HOLD cycle mute
+#AR_VUP add volume 2
+#AR_VUP_HOLD add chapter 1
+#AR_VDOWN add volume -2
+#AR_VDOWN_HOLD add chapter -1
+
+#
+# Legacy bindings (may or may not be removed in the future)
+#
+#! add chapter -1                       # skip to previous chapter
+#@ add chapter 1                        #         next
+
+#
+# Not assigned by default
+# (not an exhaustive list of unbound commands)
+#
+
+# ? add sub-scale +0.1                  # increase subtitle font size
+# ? add sub-scale -0.1                  # decrease subtitle font size
+# ? sub-step -1                         # immediately display next subtitle
+# ? sub-step +1                         #                     previous
+# ? cycle angle                         # switch DVD/Bluray angle
+# ? add balance -0.1                    # adjust audio balance in favor of left
+# ? add balance 0.1                     #                                  right
+# ? cycle sub-forced-only               # toggle DVD forced subs
+# ? cycle program                       # cycle transport stream programs
+# ? stop                                # stop playback (quit or enter idle mode)
+I vf toggle format=yuv420p,vapoursynth=~~/motioninterpolation.vpy:4:4
+M vf toggle hflip
--- a/.config/mpv/motioninterpolation.vpy
+++ b/.config/mpv/motioninterpolation.vpy
@@ -0,0 +1,74 @@
+# vim: set ft=python:
+
+# see the README at https://gist.github.com/phiresky/4bfcfbbd05b3c2ed8645
+# source: https://github.com/mpv-player/mpv/issues/2149
+# source: https://github.com/mpv-player/mpv/issues/566
+# source: https://github.com/haasn/gentoo-conf/blob/nanodesu/home/nand/.mpv/filters/mvtools.vpy
+
+import vapoursynth
+
+core = vapoursynth.get_core()
+# ref: http://avisynth.org.ru/mvtools/mvtools2.html#functions
+# default is 400, less means interpolation will only happen when it will work well
+ignore_threshold=140
+# if n% of blocks change more than threshold then don't interpolate at all (default is 51%)
+scene_change_percentage=15
+
+dst_fps = display_fps
+# Interpolating to fps higher than 60 is too CPU-expensive, smoothmotion can handle the rest.
+# while (dst_fps > 60):
+#    dst_fps /= 2
+
+if "video_in" in globals():
+    # realtime
+    clip = video_in
+    # Needed because clip FPS is missing
+    src_fps_num = int(container_fps * 1e8)
+    src_fps_den = int(1e8)
+    clip = core.std.AssumeFPS(clip, fpsnum = src_fps_num, fpsden = src_fps_den)
+else:
+    # run with vspipe
+    clip = core.ffms2.Source(source=in_filename)
+    dst_fps=float(dst_fps)
+
+# resolution in megapixels. 1080p ≈ 2MP, 720p ≈ 1MP
+mpix = clip.width * clip.height / 1000000
+
+# Skip interpolation for >1080p or 60 Hz content due to performance
+if not (mpix > 2.5 or clip.fps_num/clip.fps_den > 59):
+    analParams = {
+        'overlap': 0,
+        'search': 3,
+        'truemotion': True,
+        #'chrome': True,
+        #'blksize':16,
+        #'searchparam':1
+    }
+    blockParams = {
+        'thscd1': ignore_threshold,
+        'thscd2': int(scene_change_percentage*255/100),
+        'mode': 3,
+    }
+
+    if mpix > 1.5:
+        # can't handle these on Full HD with Intel i5-2500k
+        # see the description of these parameters in http://avisynth.org.ru/mvtools/mvtools2.html#functions
+        analParams['search'] = 0
+        blockParams['mode'] = 0
+        quality = 'low'
+    else:
+        quality = 'high'
+
+
+    dst_fps_num = int(dst_fps * 1e4)
+    dst_fps_den = int(1e4)
+    print("Reflowing from {} fps to {} fps (quality={})".format(clip.fps_num/clip.fps_den,dst_fps_num/dst_fps_den,quality))
+    
+    sup  = core.mv.Super(clip, pel=2)
+    bvec = core.mv.Analyse(sup, isb=True, **analParams)
+    fvec = core.mv.Analyse(sup, isb=False, **analParams)
+    clip = core.mv.BlockFPS(clip, sup, bvec, fvec, 
+            num=dst_fps_num, den=dst_fps_den, 
+            **blockParams)
+
+clip.set_output()
--- a/.config/mpv/mpv.conf
+++ b/.config/mpv/mpv.conf
@@ -0,0 +1,153 @@
+#
+# Example mpv configuration file
+#
+# Warning:
+#
+# The commented example options usually do _not_ set the default values. Call
+# mpv with --list-options to see the default values for most options. There is
+# no builtin or example mpv.conf with all the defaults.
+#
+#
+# Configuration files are read system-wide from /usr/local/etc/mpv.conf
+# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
+# system-wide settings, all of which are overridden by the command line.
+#
+# Configuration file settings and the command line options use the same
+# underlying mechanisms. Most options can be put into the configuration file
+# by dropping the preceding '--'. See the man page for a complete list of
+# omeone explain to me how est of at least 10 milliptions.
+#
+# Lines starting with '#' are comments and are ignored.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+#
+# Profiles should be placed at the bottom of the configuration file to ensure
+# that settings wanted as defaults are not restricted to specific profiles.
+
+input-ipc-server=/tmp/mpvsocket
+
+##################
+# video settings #
+##################
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# force starting with centered window
+geometry=50%:50%
+
+# don't allow a new window to have a size larger than 90% of the screen size
+autofit-larger=90%x90%
+
+# Do not close the window on exit.
+keep-open=no
+
+# Do not wait with showing the video window until it has loaded. (This will
+# resize the window once video is loaded. Also always shows a window with
+# audio.)
+force-window=immediate
+
+# Disable the On Screen Controller (OSC).
+osc=yes
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+# Specify high quality video rendering preset (for OpenGL VO only)
+# Can cause performance problems with some drivers and GPUs.
+# profile=opengl-hq
+# scale=ewa_lanczossharp
+# cscale=ewa_lanczossharp
+# video-sync=display-resample
+# interpolation
+# tscale=oversample
+
+# Force video to lock on the display's refresh rate, and change video and audio
+# speed to some degree to ensure synchronous playback - can cause problems
+# with some drivers and desktop environments.
+video-sync=display-resample
+
+# Enable hardware decoding if available. Often, this does not work with all
+# video outputs, but should work well with default settings on most systems.
+# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
+# may or may not help.
+hwdec=auto-copy
+
+##################
+# audio settings #
+##################
+
+# Specify default audio device. You can list devices with: --audio-device=help
+# The option takes the device string (the stuff between the '...').
+#audio-device=alsa/default
+
+# Do not filter audio to keep pitch when changing playback speed.
+#audio-pitch-correction=no
+
+# Output 5.1 audio natively, and upmix/downmix audio with a different format.
+#audio-channels=5.1
+# Disable any automatic remix, _if_ the audio output accepts the audio format.
+# of the currently played file. See caveats mentioned in the manpage.
+# (The default is "auto-safe", see manpage.)
+#audio-channels=auto
+
+##################
+# other settings #
+##################
+
+# Pretend to be a web browser. Might fix playback with some streaming sites,
+# but also will break with shoutcast streams.
+#user-agent="Mozilla/5.0"
+
+# cache settings
+#
+# Use 150MB input cache by default. The cache is enabled for network streams only.
+#cache-default=153600
+#
+# Use 150MB input cache for everything, even local files.
+#cache=153600
+#
+# Disable the behavior that the player will pause if the cache goes below a
+# certain fill size.
+#cache-pause=no
+#
+# Read ahead about 5 seconds of audio and video packets.
+#demuxer-readahead-secs=5.0
+#
+# Raise readahead from demuxer-readahead-secs to this value if a cache is active.
+#cache-secs=50.0
+
+# Display English subtitles if available.
+slang=en,fr
+
+# Play English audio if available, fall back to French otherwise.
+alang=en,fr
+
+# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
+# If the file seems to be valid UTF-8, prefer UTF-8.
+# (You can add '+' in front of the codepage to force it.)
+sub-codepage=UTF-8
+
+# You can also include other configuration files.
+#include=/path/to/the/file/you/want/to/include
+
+############
+# Profiles #
+############
+
+# The options declared as part of profiles override global default settings,
+# but only take effect when the profile is active.
+
+# The following profile can be enabled on the command line with: --profile=eye-cancer
+
+[eye-cancer]
+sharpen=5
+
+[qualitatif]
+profile=opengl-hq
+scale=ewa_lanczossharp
+cscale=ewa_lanczossharp
+video-sync=display-resample
+interpolation
+tscale=oversamplevf=format=yuv420p,vapoursynth=~~/motioninterpolation.vpy:4:4