From 180a7f9c54d00417bd8dd937f1aa3a0ef22f4b31 Mon Sep 17 00:00:00 2001 From: Lucien Cartier-Tilet Date: Sat, 15 Aug 2020 18:20:39 +0200 Subject: [PATCH] Better presentation of Picom config --- org/config/picom.org | 164 +++++++++++++++++++++---------------------- 1 file changed, 81 insertions(+), 83 deletions(-) diff --git a/org/config/picom.org b/org/config/picom.org index 2f625bc..3245958 100644 --- a/org/config/picom.org +++ b/org/config/picom.org @@ -1,11 +1,9 @@ -#+title: Picom Configuration -#+INCLUDE: headers -#+setupfile: auto-id:t +#+title: Picom (Compton) Configuration +#+setupfile: headers #+HTML_HEAD_EXTRA: #+HTML_HEAD_EXTRA: #+HTML_HEAD_EXTRA: #+PROPERTY: header-args:conf :exports code :tangle ~/.config/picom/picom.conf -#+STARTUP: content * Table of Contents :TOC:noexport: :PROPERTIES: @@ -49,24 +47,24 @@ #+END_SRC Picom can also apply some level of opacity on shadows. - - Default value :: ~0.75~ - - Min value :: ~0.0~ - - Max value :: ~1.0~ + | Default value | ~0.75~ | + | Min value | ~0.0~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf shadow-opacity = 0.85 #+END_SRC The left and top offsets for shadows are expressed in pixels. - - Default value :: ~-15~ + | Default value | ~-15~ | #+BEGIN_SRC conf shadow-offset-x = -5; shadow-offset-y = -5; #+END_SRC The following values have an impact on the shadow’s RGB color. - - Default value :: ~0.0~ - - Min value :: ~0.0~ - - Max value :: ~1.0~ + | Default value | ~0.0~ | + | Min value | ~0.0~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf shadow-red = 0.0; shadow-green = 0.0; @@ -75,7 +73,7 @@ It is possible to specify a list of conditions of windows that should have no shadow. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf shadow-exclude = [ "name = 'Notification'", @@ -94,7 +92,7 @@ #+END_SRC would make the 10 pixels at the bottom of the screen not have any shadow painted on. - - Default value :: ~""~ + | Default value | ~""~ | #+BEGIN_SRC conf :tangle no shadow-exclude-reg = "" #+END_SRC @@ -116,7 +114,7 @@ Thanks to this value, Picom can avoid drawing shadows on dock or panel windows. This option is deprecated, and users should use the ~wintypes~ option in their config file instead. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf no-dock-shadow = false; #+END_SRC @@ -124,7 +122,7 @@ This option allows Picom not to draw on drag-and-drop windows. This option is deprecated, and users should use the ~wintypes~ option in their config file instead. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf no-dnd-shadow = false; #+END_SRC @@ -140,7 +138,7 @@ #+BEGIN_SRC conf :tangle no shadow-exclude = 'bounding_shaped && !rounded_corners' #+END_SRC - - Default value :: ~""~ + | Default value | ~""~ | #+BEGIN_SRC conf :tangle no shadow-ignore-shaped = "" #+END_SRC @@ -172,44 +170,44 @@ closing or when the opacity changes. The following parameter toggles this feature on or off. However, its behavior can be changed with ~no-fading-openclose~. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf fading = true #+END_SRC These values controls the opacity change between steps while fading in and out. - - Default value :: ~0.028~ (fade-in), ~0.03~ (fade-out) - - Min value :: ~0.01~ - - Max value :: ~1.0~ + | Default value | ~0.028~ (fade-in), ~0.03~ (fade-out) | + | Min value | ~0.01~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf fade-in-step = 0.09; fade-out-step = 0.08; #+END_SRC This value represents the time between steps in fade steps, in milliseconds. - - Default value :: ~10~ - - Min value :: ~1~ + | Default value | ~10~ | + | Min value | ~1~ | #+BEGIN_SRC conf fade-delta = 20; #+END_SRC It is possible to exclude some windows that should not be faded with a specified list of conditions. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf fade-exclude = [ "class_g = 'mpv'" ]; #+END_SRC This option allows Picom not to create any fade on windows opening or closing. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf no-fading-openclose = true; #+END_SRC Finally, this option is a workaround for Openbox, Fluxbox and others by not fading destroyed ARGB windows with WM frame. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf no-fading-destroyed-argb = false #+END_SRC @@ -221,66 +219,66 @@ Picom is also able to create some opacity or transparency for windows, depending on their state or on some user-defined rules. For instance, the following value describes the opacity of inactive windows. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf inactive-opacity = 0.6; #+END_SRC On the other hand, it is possible to declare a default opacity for active windows. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf active-opacity = 1; #+END_SRC This however describes the opacity of window titlebars and borders. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf frame-opacity = 1.0; #+END_SRC ~menu-opacity~ describes the opacity for dropdown menus and popup menus. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf # menu-opacity = 0.9; #+END_SRC ~inactive-opacity-override~ allows the user to let inactive opacity set by ~-i~ override the ~_NET_WM_OPACITY_ values of windows. - - Default value :: ~true~ + | Default value | ~true~ | #+BEGIN_SRC conf inactive-opacity-override = true; #+END_SRC While it is possible to alter opacity on inactive windows, it is also possible to dim them. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf # inactive-dim = 1.0 #+END_SRC It is also possible to use a fixed inactive dim value, instead of adjusting according to window opacity. - - Default value :: ~1.0~ - - Min value :: ~0.1~ - - Max value :: ~1.0~ + | Default value | ~1.0~ | + | Min value | ~0.1~ | + | Max value | ~1.0~ | #+BEGIN_SRC conf # inactive-dim-fixed = 1.0 #+END_SRC It is also possible to specify a list of conditions of windows that should always be considered focused. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf focus-exclude = [ "class_g = 'mpv'" ]; #+END_SRC @@ -289,7 +287,7 @@ ~PERCENT:PATTERN~, like ~50:name *= "Firefox"~. picom-trans is recommended over this. Note we don't make any guarantee about possible conflicts with other programs that set ~_NET_WM_WINDOW_OPACITY~ on frame or client windows. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf opacity-rule = [ "85:class_g = 'Polybar'", @@ -317,35 +315,35 @@ This value enables or disables the blur for the background of semi-transparent or ARGB windows. It has bad performances though, with driver-dependent behavior. The name of the switch may change without prior notifications. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf blur-background = true; #+END_SRC Blur background of windows when the window frame is not opaque. If true, this implies the value ~true~ for ~blur-background~. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf blur-background-frame = true; #+END_SRC The following determines whether to use fixed blur strength rather than adjusting according to window opacity. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf blur-background-fixed = false; #+END_SRC Specify the blur convolution kernel, with the format ~"5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"~. - - Default value :: ~''~ + | Default value | ~""~ | #+BEGIN_SRC conf # blur-kern = "3x3box"; blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"; #+END_SRC It is possible to write exclude conditions for background blur. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf blur-background-exclude = [ "window_type = 'desktop'", @@ -359,34 +357,34 @@ :END: Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf daemon = true; #+END_SRC Picom has three backends it can use: ~xrender~, ~glx~, and ~xr_glx_hybrid~. GLX backend is typically much faster but depends on a sane driver. - - Default value :: ~xrender~ + | Default value | ~xrender~ | #+BEGIN_SRC conf backend = "glx"; #+END_SRC This enables or disables VSync. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf vsync = true; #+END_SRC - Enable remote control via D-Bus. See the \*D-BUS API\* section below for more + Enable remote control via D-Bus. See the *D-BUS API* section below for more details. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf dbus = false; #+END_SRC Try to detect WM windows (a non-override-redirect window with no child that has ~WM_STATE~) and markz them as active. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf mark-wmwin-focused = true; #+END_SRC @@ -394,28 +392,28 @@ Mark override-redirect windows that doesn't have a child window with ~WM_STATE~ focused. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf mark-ovredir-focused = true; #+END_SRC Try to detect windows with rounded corners and don't consider them shaped windows. The accuracy is not very high, unfortunately. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf detect-rounded-corners = true; #+END_SRC Detect ~_NET_WM_OPACITY~ on client windows, useful for window managers not passing ~_NET_WM_OPACITY~ of client windows to frame windows. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf detect-client-opacity = true; #+END_SRC Specify refresh rate of the screen. If not specified or 0, picom will try detecting this with X RandR extension. - - Default value :: ~60~ + | Default value | ~60~ | #+BEGIN_SRC conf refresh-rate = 60; #+END_SRC @@ -427,7 +425,7 @@ #+END_SRC as they essentially does sw-opti's job already, unless you wish to specify a lower refresh rate than the actual value. - - Default value :: ~""~ + | Default value | ~""~ | #+BEGIN_SRC conf # sw-opti =; #+END_SRC @@ -435,7 +433,7 @@ Use EWMH ~_NET_ACTIVE_WINDOW~ to determine currently focused window, rather than listening to ~FocusIn~/~FocusOut~ event. Might have more accuracy, provided that the WM supports it. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf # use-ewmh-active-win = false; #+END_SRC @@ -444,27 +442,27 @@ performance for full-screen windows. Known to cause flickering when redirecting/unredirecting windows. paint-on-overlay may make the flickering less obvious. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf unredir-if-possible = false; #+END_SRC Delay before unredirecting the window, in milliseconds. - - Default value :: ~0~ + | Default value | ~0~ | #+BEGIN_SRC conf unredir-if-possible-delay = 0; #+END_SRC Conditions of windows that shouldn't be considered full-screen for unredirecting screen. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf unredir-if-possible-exclude = []; #+END_SRC Use ~WM_TRANSIENT_FOR~ to group windows, and consider windows in the same group focused at the same time. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf detect-transient = true; #+END_SRC @@ -472,7 +470,7 @@ Use ~WM_CLIENT_LEADER~ to group windows, and consider windows in the same group focused at the same time. ~WM_TRANSIENT_FOR~ has higher priority if detect-transient is enabled, too. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf detect-client-leader = true; #+END_SRC @@ -486,14 +484,14 @@ value here (e.g. with a 3x3 kernel, you should use ~--resize-damage 1~, with a 5x5 one you use ~--resize-damage 2~, and so on). May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly. - - Default value :: ~1~ + | Default value | ~1~ | #+BEGIN_SRC conf resize-damage = 1; #+END_SRC Specify a list of conditions of windows that should be painted with inverted color. Resource-hogging, and is not well tested. - - Default value :: ~[]~ + | Default value | ~[]~ | #+BEGIN_SRC conf invert-color-include = []; #+END_SRC @@ -502,7 +500,7 @@ redrawn everytime, instead of the part of the screen has actually changed. Potentially degrades the performance, but might fix some artifacts. The opposing option is use-damage - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf use-damage = false; #+END_SRC @@ -510,21 +508,21 @@ Use X Sync fence to sync clients' draw calls, to make sure all draw calls are finished before picom starts drawing. Needed on nvidia-drivers with GLX backend for some users. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf xrender-sync-fence = false; #+END_SRC Force all windows to be painted with blending. Useful if you have a glx-fshader-win that could turn opaque pixels transparent. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf force-win-blend = false; #+END_SRC Do not use EWMH to detect fullscreen windows. Reverts to checking if a window is fullscreen based only on its size and coordinates. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf no-ewmh-fullscreen = false; #+END_SRC @@ -533,14 +531,14 @@ Brightness of a window is estimated by averaging all pixels in the window, so this could comes with a performance hit. Setting this to 1.0 disables this behaviour. Requires ~--use-damage~ to be disabled. - - Default value :: ~1.0~ + | Default value | ~1.0~ | #+BEGIN_SRC conf max-brightness = 1.0; #+END_SRC Make transparent windows clip other windows like non-transparent windows do, instead of blending on top of them. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf transparent-clipping = false; #+END_SRC @@ -554,7 +552,7 @@ in increasing level of importance. Case doesn't matter. If using the "TRACE" log level, it's better to log into a file using ~--log-file~, since it can generate a huge stream of logs. - - Default value :: ~"debug"~ + | Default value | ~"debug"~ | #+BEGIN_SRC conf log-level = "warn"; #+END_SRC @@ -563,19 +561,19 @@ stderr. Otherwise, logs will to written to the given file, though some of the early logs might still be written to the stderr. When setting this option from the config file, it is recommended to use an absolute path. - - Default value :: ~''~ + | Default value | ~''~ | #+BEGIN_SRC conf # log-file = '/path/to/your/log/file'; #+END_SRC Show all X errors (for debugging) - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf # show-all-xerrors = false; #+END_SRC Write process ID to a file. - - Default value :: ~''~ + | Default value | ~''~ | #+BEGIN_SRC conf # write-pid-path = '/path/to/your/log/file'; #+END_SRC @@ -629,7 +627,7 @@ cause incorrect opacity when rendering transparent content (but never practically happened) and may not work with blur-background. Tests show a 15% performance boost. Recommended. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf glx-no-stencil = true; #+END_SRC @@ -637,7 +635,7 @@ Avoid rebinding pixmap on window damage. Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.). Recommended if it works. - - Default value :: ~false~ + | Default value | ~false~ | #+BEGIN_SRC conf glx-no-rebind-pixmap = false; #+END_SRC @@ -645,7 +643,7 @@ Use specified GLSL fragment shader for rendering window contents. See ~compton-default-fshader-win.glsl~ and ~compton-fake-transparency-fshader-win.glsl~ in the source tree for examples. - - Default value :: ~''~ + | Default value | ~''~ | #+BEGIN_SRC conf :tangle no glx-fshader-win = ''; #+END_SRC