config.phundrak.com/.spacemacs

744 lines
38 KiB
Plaintext

;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
(defun dotspacemacs/layers ()
"Layer configuration:
This function should only modify configuration layer settings."
(setq-default
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; Lazy installation of layers (i.e. layers are installed only when a file
;; with a supported type is opened). Possible values are `all', `unused'
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
;; lazy install any layer that support lazy installation even the layers
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
;; installation feature and you have to explicitly list a layer in the
;; variable `dotspacemacs-configuration-layers' to install it.
;; (default 'unused)
dotspacemacs-enable-lazy-installation 'unused
;; If non-nil then Spacemacs will ask for confirmation before installing
;; a layer lazily. (default t)
dotspacemacs-ask-for-lazy-installation t
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load.
dotspacemacs-configuration-layers
'(asm
(auto-completion :variables
auto-completion-complete-with-key-sequence-delay 0.2
auto-completion-enable-help-tooltip 'manual
auto-completion-enable-snippets-in-popup t
auto-completion-enable-sort-by-usage t
:disabled-for
org
git)
(better-defaults :variables
better-defaults-move-to-beginning-of-code-first t
better-defaults-move-to-end-of-code-first t)
(c-c++ :variables
c-c++-default-mode-for-headers 'c-mode
c-c++-adopt-subprojects t
c-c++-enable-google-style t
c-c++-enable-c++11 t
c-c++-backend 'lsp-ccls
c-c++-lsp-executable "/usr/bin/ccls"
c-c++-lsp-sem-highlight-method 'overlay
c-c++-lsp-sem-highlight-rainbow t
c-c++-adopt-subprojects t
c++-enable-organize-includes-on-save t)
(cmake :variables
cmake-enable-cmake-ide-support t)
conlanging
csv
colors
(dart :variables
dart-server-sdk-path "/opt/flutter/bin/cache/dart-sdk/"
lsp-dart-sdk-dir "/opt/flutter/bin/cache/dart-sdk/")
dap
dired-phundrak
django
docker
emacs-lisp
epub
ess
git
graphviz
(go :variables
go-backend 'lsp
go-tab-width 2
go-use-golangci-lint t)
gnus
(helm :variables
helm-no-header t
helm-use-fuzzy 'source)
helpful
(html :variables
web-fmt-tool 'web-beautify
css-enable-lsp t
less-enable-lsp t
scss-enable-lsp t
html-enable-lsp t)
(ibuffer :variables
ibuffer-group-buffers-by 'projects)
imenu-list
(javascript :variables
javascript-backend 'lsp
javascript-lsp-linter nil
javascript-fmt-tool 'web-beautify
javascript-repl 'skewer
node-add-modules-path t)
(json :variables
json-fmt-tool 'web-beautify)
(keyboard-layout :variables
kl-layout 'bepo
kl-disabled-configurations '(magit dired eww))
(latex :variables
latex-build-command "xelatex"
latex-enable-auto-fill t
latex-enable-folding t
latex-enable-magic t)
lsp
major-modes
(markdown :variables
markdown-live-preview-engine 'vmd
markdown-mmm-auto-modes '("c"
"c++"
"python"
"rust"
("elisp" "emacs-lisp")))
nginx
(org :variables
org-enable-reveal-js-support t
org-enable-github-support t
spaceline-org-clock-p t
org-enable-sticky-header t
org-enable-epub-support t
org-projectile-file "TODOs.org"
org-download-image-dir "~/Pictures/org/"
org-enable-org-journal-support t
org-journal-dir "~/org/journal/"
org-journal-file-format "%Y-%m-%d"
org-enable-epub-support t
org-return-follows-link t)
pass
pdf
prettier
prolog
(python :variables
python-backend 'lsp
python-sort-imports-on-save t
python-fill-column 80
python-test-runner '(pytest nose)
python-formatter 'lsp)
(restclient :variables
restclient-use-org t)
(rust :variables rust-backend 'lsp)
(scheme :variables
geiser-chicken-binary "chicken-csi")
semantic
(shell :variables
shell-default-height 40
shell-default-position 'bottom
shell-default-shell 'eshell)
shell-scripts
selectric
semantic
(spell-checking :variables
spell-checking-enable-by-default nil
spell-checking-enable-auto-dictionary t
enable-flyspell-auto-completion nil)
(syntax-checking :variables
spell-checking-enable-by-default nil
spell-checking-enable-auto-dictionary t
syntax-checking-enable-tooltips t
syntax-checking-use-original-bitmaps t)
systemd
(treemacs :variables
treemacs-use-follow-mode nil
treemacs-use-filewatch-mode t)
twitter
unicode-fonts
w3m
xkcd
web-beautify
yaml)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'.
;; To use a local version of a package, use the `:location' property:
;; '(your-package :location "~/path/to/your-package/")
;; Also include the dependencies as they will not be resolved automatically.
dotspacemacs-additional-packages '(atomic-chrome
dired-du
doom-themes
edit-indirect
elcord
eshell-git-prompt
flycheck-golangci-lint
kaolin-themes
magit-gitflow
meson-mode
modern-cpp-font-lock
multiple-cursors
org-sidebar
outorg
pinentry
visual-fill-column
wttrin
xresources-theme
yasnippet-snippets)
;; A list of packages that cannot be updated.
dotspacemacs-frozen-packages '()
;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '()
;; Defines the behaviour of Spacemacs when installing packages.
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
;; `used-only' installs only explicitly used packages and deletes any unused
;; packages as well as their unused dependencies. `used-but-keep-unused'
;; installs only the used packages but won't delete unused ones. `all'
;; installs *all* packages supported by Spacemacs and never uninstalls them.
;; (default is `used-only')
dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
"Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non-nil then enable support for the portable dumper. You'll need
;; to compile Emacs 27 from source following the instructions in file
;; EXPERIMENTAL.org at to root of the git repository.
;; (default nil)
dotspacemacs-enable-emacs-pdumper nil
;; Name of executable file pointing to emacs 27+. This executable must be
;; in your PATH.
;; (default "emacs")
dotspacemacs-emacs-pdumper-executable-file "emacs"
;; Name of the Spacemacs dump file. This is the file will be created by the
;; portable dumper in the cache directory under dumps sub-directory.
;; To load it when starting Emacs add the parameter `--dump-file'
;; when invoking Emacs 27.1 executable on the command line, for instance:
;; ./emacs --dump-file=~/.emacs.d/.cache/dumps/spacemacs.pdmp
;; (default spacemacs.pdmp)
dotspacemacs-emacs-dumper-dump-file "spacemacs.pdmp"
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
;; (default 5)
dotspacemacs-elpa-timeout 5
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
;; This is an advanced option and should not be changed unless you suspect
;; performance issues due to garbage collection operations.
;; (default '(100000000 0.1))
dotspacemacs-gc-cons '(100000000 0.1)
;; If non-nil then Spacelpa repository is the primary source to install
;; a locked version of packages. If nil then Spacemacs will install the
;; latest version of packages from MELPA. (default nil)
dotspacemacs-use-spacelpa nil
;; If non-nil then verify the signature for downloaded Spacelpa archives.
;; (default t)
dotspacemacs-verify-spacelpa-archives t
;; If non-nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'. (default 'emacs-version)
dotspacemacs-elpa-subdirectory 'emacs-version
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style '(hybrid :variables
hybrid-mode-enable-evilified-state t
hybrid-mode-default-state 'normal)
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `bookmarks' `projects' `agenda' `todos'.
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
dotspacemacs-startup-lists '((recents . 15)
(projects . 15))
;; True if the home buffer should respond to resize events. (default t)
dotspacemacs-startup-buffer-responsive t
;; Default major mode for a new empty buffer. Possible values are mode
;; names such as `text-mode'; and `nil' to use Fundamental mode.
;; (default `text-mode')
dotspacemacs-new-empty-buffer-major-mode 'text-mode
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'org-mode
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
;; (default nil)
dotspacemacs-initial-scratch-message nil
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press `SPC T n' to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(xresources
doom-vibrant
doom-nord
spacemacs-dark
doom-one
doom-opera
doom-dracula
doom-molokai
doom-peacock
doom-sourcerer
doom-spacegrey
kaolin-dark
kaolin-aurora
kaolin-bubblegum
kaolin-galaxy
kaolin-mono-dark
kaolin-temple
kaolin-valley-dark)
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
;; refer to the DOCUMENTATION.org for more info on how to create your own
;; spaceline theme. Value can be a symbol or list with additional properties.
;; (default '(spacemacs :separator wave :separator-scale 1.5))
dotspacemacs-mode-line-theme '(doom
:separator wave
:separator-scale 1.0)
;; If non-nil the cursor color matches the state color in GUI Emacs.
;; (default t)
dotspacemacs-colorize-cursor-according-to-state t
;; Default font or prioritized list of fonts.
dotspacemacs-default-font '("FiraCode Nerd Font Mono" :size 8.0 :weight normal :width normal)
;; The leader key (default "SPC")
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m")
dotspacemacs-major-mode-emacs-leader-key "C-M-m"
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
;; Setting it to a non-nil value, allows for separate commands under `C-i'
;; and TAB or `C-m' and `RET'.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non-nil then the last auto saved layouts are resumed automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; If non-nil, auto-generate layout name when creating new layouts. Only has
;; effect when using the "jump to layout by number" commands. (default nil)
dotspacemacs-auto-generate-layout-names nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 10
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non-nil, the paste transient-state is enabled. While enabled, after you
;; paste something, pressing `C-j' and `C-k' several times cycles through the
;; elements in the `kill-ring'. (default nil)
dotspacemacs-enable-paste-transient-state t
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; Control where `switch-to-buffer' displays the buffer. If nil,
;; `switch-to-buffer' displays the buffer in the current window even if
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
;; displays the buffer in a same-purpose window even if the buffer can be
;; displayed in the current window. (default nil)
dotspacemacs-switch-to-buffer-prefers-purpose nil
;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; If non-nil the frame is undecorated when Emacs starts up. Combine this
;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
;; borderless fullscreen. (default nil)
dotspacemacs-undecorated-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non-nil unicode symbols are displayed in the mode line.
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
;; the value to quoted `display-graphic-p'. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Control line numbers activation.
;; If set to `t', `relative' or `visual' then line numbers are enabled in all
;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
;; numbers are relative. If set to `visual', line numbers are also relative,
;; but lines are only visual lines are counted. For example, folded lines
;; will not be counted and wrapped lines are counted as multiple lines.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :visual nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; When used in a plist, `visual' takes precedence over `relative'.
dotspacemacs-line-numbers '(:relative nil
:enabled-for-modes prog-mode)
;; Code folding method. Possible values are `evil' and `origami'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc...
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non-nil, start an Emacs server if one is not already running.
;; (default nil)
dotspacemacs-enable-server nil
;; Set the emacs server socket location.
;; If nil, uses whatever the Emacs default is, otherwise a directory path
;; like \"~/.emacs.d/server\". It has no effect if
;; `dotspacemacs-enable-server' is nil.
;; (default nil)
dotspacemacs-server-socket-dir nil
;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
;; (default '("rg" "ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; Format specification for setting the frame title.
;; %a - the `abbreviated-file-name', or `buffer-name'
;; %t - `projectile-project-name'
;; %I - `invocation-name'
;; %S - `system-name'
;; %U - contents of $USER
;; %b - buffer name
;; %f - visited file name
;; %F - frame name
;; %s - process status
;; %p - percent of buffer above top of window, or Top, Bot or All
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
;; %m - mode name
;; %n - Narrow if appropriate
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
;; %Z - like %z, but including the end-of-line format
;; (default "%I@%S")
dotspacemacs-frame-title-format "%b (%m)"
;; Format specification for setting the icon title format
;; (default nil - same as frame-title-format)
dotspacemacs-icon-title-format nil
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed' to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
;; Either nil or a number of seconds. If non-nil zone out after the specified
;; number of seconds. (default nil)
dotspacemacs-zone-out-when-idle nil
;; Run `spacemacs/prettify-org-buffer' when
;; visiting README.org files of Spacemacs.
;; (default nil)
dotspacemacs-pretty-docs nil))
(defun dotspacemacs/user-env ()
"Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
(spacemacs/load-spacemacs-env))
(defun dotspacemacs/user-init ()
"Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
(setq phundrak/src-dir (concat (getenv "HOME") "/.emacs.d/private/")
phundrak/gnus-uc (concat (getenv "HOME") "/.gnus.el")
phundrak/src (concat (getenv "HOME") "/spacemacs.org")
phundrak/uc (concat phundrak/src-dir "user-config.el")
phundrak/ui (concat phundrak/src-dir "user-init.el"))
(when (or (file-newer-than-file-p phundrak/src phundrak/ui)
(file-newer-than-file-p phundrak/src phundrak/gnus-uc)
(file-newer-than-file-p phundrak/src phundrak/uc))
(message "Exporting new Emacs configuration from spacemacs.org through Org-babel")
(call-process
(concat invocation-directory invocation-name)
nil nil t
"-q" "--batch" "--eval" "(require 'ob-tangle)"
"--eval" (format "(org-babel-tangle-file \"%s\")" phundrak/src)))
(load-file phundrak/ui))
(defun dotspacemacs/user-load ()
"Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
)
(defun dotspacemacs/user-config ()
"Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
;; load file exported from `~/spacemacs.org' in `dotspacemacs/user-load'
(load-file phundrak/uc))
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(ansi-color-faces-vector
[default default default italic underline success warning error])
'(ansi-color-names-vector
["black" "red3" "ForestGreen" "yellow3" "blue" "magenta3" "DeepSkyBlue" "gray50"])
'(evil-want-Y-yank-to-eol nil)
'(org-export-headline-levels 4)
'(package-selected-packages
'(xkcd vmd-mode visual-fill-column typit mmt sudoku restclient-helm pony-mode pacmacs ox-reveal outorg ob-restclient ob-http meson-mode ibuffer-projectile lv helm-w3m w3m graphviz-dot-mode flycheck-gometalinter transient ess-smart-equals ess-R-data-view ctable ess julia-mode eshell-git-prompt emoji-cheat-sheet-plus edit-indirect dockerfile-mode docker docker-tramp company-restclient restclient know-your-http-well company-quickhelp company-emoji company-emacs-eclim eclim atomic-chrome websocket 2048-game ox-gfm slime-company slime common-lisp-snippets erlang insert-shebang fish-mode company-shell faceup racket-mode treepy graphql yapfify yaml-mode xterm-color web-beautify twittering-mode toml-mode tagedit stickyfunc-enhance smeargle slim-mode shell-pop selectric-mode scss-mode sass-mode ranger rainbow-identifiers pytest pyenv-mode py-isort pug-mode plantuml-mode phpunit phpcbf php-auto-yasnippets pdf-tools tablist ox-pandoc orgit org-present org-pomodoro alert log4e gntp ob-elixir multi-term markdown-toc magit-gitflow magit-gh-pulls livid-mode live-py-mode json-snatcher js2-refactor js-doc htmlize hlint-refactor hindent helm-pydoc helm-hoogle helm-gitignore helm-css-scss haskell-snippets haml-mode gnuplot glsl-mode gitignore-mode github-search github-clone github-browse-file gitconfig-mode gitattributes-mode git-messenger gist gh marshal logito pcache ht gh-md flyspell-correct-helm flyspell-correct flycheck-rust pos-tip flycheck-mix flycheck-credo eshell-z eshell-prompt-extras esh-help drupal-mode disaster cython-mode dash-functional tern company-ghci company-ghc ghc color-identifiers-mode cmm-mode clang-format cargo auto-dictionary alchemist modern-cpp-font-lock yasnippet-snippets x86-lookup web-mode srefactor racer pyvenv pip-requirements pandoc-mode org-projectile org-category-capture org-mime org-download nasm-mode json-reformat intero imenu-list hy-mode git-timemachine git-link geiser flycheck-pos-tip flycheck-haskell evil-magit emmet-mode cmake-mode anaconda-mode rust-mode elixir-mode flycheck haskell-mode multiple-cursors skewer-mode simple-httpd markdown-mode magit magit-popup git-commit ghub with-editor pythonic emms gmail-message-mode ham-mode html-to-markdown flymd edit-server image-dired+ go-guru go-eldoc company-go go-mode unfill mwim company-web web-completion-data company-tern company-cabal company-c-headers company-auctex company-anaconda elcord xresources-theme sql-indent rainbow-mode php-extras php-mode mmm-mode json-mode js2-mode csv-mode coffee-mode auctex helm-company helm-c-yasnippet fuzzy company-statistics company auto-yasnippet yasnippet ac-ispell auto-complete ws-butler winum which-key volatile-highlights vi-tilde-fringe uuidgen use-package toc-org spaceline powerline restart-emacs request rainbow-delimiters popwin persp-mode pcre2el paradox spinner org-plus-contrib org-bullets open-junk-file neotree move-text macrostep lorem-ipsum linum-relative link-hint indent-guide hydra hungry-delete hl-todo highlight-parentheses highlight-numbers parent-mode highlight-indentation helm-themes helm-swoop helm-projectile helm-mode-manager helm-make projectile pkg-info epl helm-flx helm-descbinds helm-ag google-translate golden-ratio flx-ido flx fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state smartparens evil-indent-plus evil-iedit-state iedit evil-exchange evil-escape evil-ediff evil-args evil-anzu anzu evil goto-chg undo-tree eval-sexp-fu highlight elisp-slime-nav dumb-jump f dash s diminish define-word column-enforce-mode clean-aindent-mode bind-map bind-key auto-highlight-symbol auto-compile packed aggressive-indent adaptive-wrap ace-window ace-link ace-jump-helm-line helm avy helm-core popup async)))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
(defun dotspacemacs/emacs-custom-settings ()
"Emacs custom settings.
This is an auto-generated function, do not modify its content directly, use
Emacs customize menu instead.
This function is called at the very end of Spacemacs initialization."
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(ansi-color-faces-vector
[default default default italic underline success warning error])
'(ansi-color-names-vector
["black" "red3" "ForestGreen" "yellow3" "blue" "magenta3" "DeepSkyBlue" "gray50"])
'(default-input-method "ipa-x-sampa")
'(eshell-aliases-file "/home/phundrak/.emacs.d/private/eshell-alias")
'(evil-want-Y-yank-to-eol nil)
'(fci-rule-color "#5B6268")
'(hl-todo-keyword-faces
(quote
(("TODO" . "#dc752f")
("NEXT" . "#dc752f")
("THEM" . "#2d9574")
("PROG" . "#3a81c3")
("OKAY" . "#3a81c3")
("DONT" . "#f2241f")
("FAIL" . "#f2241f")
("DONE" . "#42ae2c")
("NOTE" . "#b1951d")
("KLUDGE" . "#b1951d")
("HACK" . "#b1951d")
("TEMP" . "#b1951d")
("FIXME" . "#dc752f")
("XXX" . "#dc752f")
("XXXX" . "#dc752f"))))
'(jdee-db-active-breakpoint-face-colors (cons "#1B2229" "#51afef"))
'(jdee-db-requested-breakpoint-face-colors (cons "#1B2229" "#98be65"))
'(jdee-db-spec-breakpoint-face-colors (cons "#1B2229" "#3f444a"))
'(objed-cursor-color "#ff6c6b")
'(org-export-headline-levels 4)
'(package-selected-packages
(quote
(helpful elisp-refs loop xkcd vmd-mode visual-fill-column typit mmt sudoku restclient-helm pony-mode pacmacs ox-reveal outorg ob-restclient ob-http meson-mode ibuffer-projectile lv helm-w3m w3m graphviz-dot-mode flycheck-gometalinter transient ess-smart-equals ess-R-data-view ctable ess julia-mode eshell-git-prompt emoji-cheat-sheet-plus edit-indirect dockerfile-mode docker docker-tramp company-restclient restclient know-your-http-well company-quickhelp company-emoji company-emacs-eclim eclim atomic-chrome websocket 2048-game ox-gfm slime-company slime common-lisp-snippets erlang insert-shebang fish-mode company-shell faceup racket-mode treepy graphql yapfify yaml-mode xterm-color web-beautify twittering-mode toml-mode tagedit stickyfunc-enhance smeargle slim-mode shell-pop selectric-mode scss-mode sass-mode ranger rainbow-identifiers pytest pyenv-mode py-isort pug-mode plantuml-mode phpunit phpcbf php-auto-yasnippets pdf-tools tablist ox-pandoc orgit org-present org-pomodoro alert log4e gntp ob-elixir multi-term markdown-toc magit-gitflow magit-gh-pulls livid-mode live-py-mode json-snatcher js2-refactor js-doc htmlize hlint-refactor hindent helm-pydoc helm-hoogle helm-gitignore helm-css-scss haskell-snippets haml-mode gnuplot glsl-mode gitignore-mode github-search github-clone github-browse-file gitconfig-mode gitattributes-mode git-messenger gist gh marshal logito pcache ht gh-md flyspell-correct-helm flyspell-correct flycheck-rust pos-tip flycheck-mix flycheck-credo eshell-z eshell-prompt-extras esh-help drupal-mode disaster cython-mode dash-functional tern company-ghci company-ghc ghc color-identifiers-mode cmm-mode clang-format cargo auto-dictionary alchemist modern-cpp-font-lock yasnippet-snippets x86-lookup web-mode srefactor racer pyvenv pip-requirements pandoc-mode org-projectile org-category-capture org-mime org-download nasm-mode json-reformat intero imenu-list hy-mode git-timemachine git-link geiser flycheck-pos-tip flycheck-haskell evil-magit emmet-mode cmake-mode anaconda-mode rust-mode elixir-mode flycheck haskell-mode multiple-cursors skewer-mode simple-httpd markdown-mode magit magit-popup git-commit ghub with-editor pythonic emms gmail-message-mode ham-mode html-to-markdown flymd edit-server image-dired+ go-guru go-eldoc company-go go-mode unfill mwim company-web web-completion-data company-tern company-cabal company-c-headers company-auctex company-anaconda elcord xresources-theme sql-indent rainbow-mode php-extras php-mode mmm-mode json-mode js2-mode csv-mode coffee-mode auctex helm-company helm-c-yasnippet fuzzy company-statistics company auto-yasnippet yasnippet ac-ispell auto-complete ws-butler winum which-key volatile-highlights vi-tilde-fringe uuidgen use-package toc-org spaceline powerline restart-emacs request rainbow-delimiters popwin persp-mode pcre2el paradox spinner org-plus-contrib org-bullets open-junk-file neotree move-text macrostep lorem-ipsum linum-relative link-hint indent-guide hydra hungry-delete hl-todo highlight-parentheses highlight-numbers parent-mode highlight-indentation helm-themes helm-swoop helm-projectile helm-mode-manager helm-make projectile pkg-info epl helm-flx helm-descbinds helm-ag google-translate golden-ratio flx-ido flx fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state smartparens evil-indent-plus evil-iedit-state iedit evil-exchange evil-escape evil-ediff evil-args evil-anzu anzu evil goto-chg undo-tree eval-sexp-fu highlight elisp-slime-nav dumb-jump f dash s diminish define-word column-enforce-mode clean-aindent-mode bind-map bind-key auto-highlight-symbol auto-compile packed aggressive-indent adaptive-wrap ace-window ace-link ace-jump-helm-line helm avy helm-core popup async)))
'(pdf-view-midnight-colors (quote ("#655370" . "#fbf8ef")))
'(safe-local-variable-values
(quote
((org-confirm-babel-evaluate)
(javascript-backend . tern)
(javascript-backend . lsp)
(go-backend . go-mode)
(go-backend . lsp))))
'(send-mail-function (quote smtpmail-send-it))
'(smtpmail-smtp-server "mail.phundrak.com")
'(smtpmail-smtp-service 587)
'(solaire-mode-auto-swap-bg t)
'(vc-annotate-background "#282c34")
'(vc-annotate-color-map
(list
(cons 20 "#98be65")
(cons 40 "#b4be6c")
(cons 60 "#d0be73")
(cons 80 "#ECBE7B")
(cons 100 "#e6ab6a")
(cons 120 "#e09859")
(cons 140 "#da8548")
(cons 160 "#d38079")
(cons 180 "#cc7cab")
(cons 200 "#c678dd")
(cons 220 "#d974b7")
(cons 240 "#ec7091")
(cons 260 "#ff6c6b")
(cons 280 "#cf6162")
(cons 300 "#9f585a")
(cons 320 "#6f4e52")
(cons 340 "#5B6268")
(cons 360 "#5B6268")))
'(vc-annotate-very-old-color nil))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
)