phundrak/config.phundrak.com
1
0
Fork 0
Code Issues Pull Requests Actions Activity

initial commit for new repo

Browse Source
This commit is contained in:
Phuntsok Drak-pa 2019-07-21 03:27:31 +02:00
commit de542b3e97
80 changed files with 17176 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

543
.config/.ncmpcpp/bindings Normal file
View File

@ -0,0 +1,543 @@
##############################################################
## This is the example bindings file. Copy it to ##
## ~/.ncmpcpp/bindings or $XDG_CONFIG_HOME/ncmpcpp/bindings ##
## and set up your preferences ##
##############################################################
##
##### General rules #####
##
## 1) Because each action has runtime checks whether it's
## ok to run it, a few actions can be bound to one key.
## Actions will be bound in order given in configuration
## file. When a key is pressed, first action in order
## will test itself whether it's possible to run it. If
## test succeeds, action is executed and other actions
## bound to this key are ignored. If it doesn't, next
## action in order tests itself etc.
##
## 2) It's possible to bind more that one action at once
## to a key. It can be done using the following syntax:
##
## def_key "key"
## action1
## action2
## ...
##
## This creates a chain of actions. When such chain is
## executed, each action in chain is run until the end of
## chain is reached or one of its actions fails to execute
## due to its requirements not being met. If multiple actions
## and/or chains are bound to the same key, they will be
## consecutively run until one of them gets fully executed.
##
## 3) When ncmpcpp starts, bindings configuration file is
## parsed and then ncmpcpp provides "missing pieces"
## of default keybindings. If you want to disable some
## bindings, there is a special action called 'dummy'
## for that purpose. Eg. if you want to disable ability
## to crop playlists, you need to put the following
## into configuration file:
##
## def_key "C"
## dummy
##
## After that ncmpcpp will not bind any default action
## to this key.
##
## 4) To let you write simple macros, the following special
## actions are provided:
##
## - push_character "character" - pushes given special
## character into input queue, so it will be immediately
## picked by ncmpcpp upon next call to readKey function.
## Accepted values: mouse, up, down, page_up, page_down,
## home, end, space, enter, insert, delete, left, right,
## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\,
## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace.
## In addition, most of these names can be prefixed with
## alt-/ctrl-/shift- to be recognized with the appropriate
## modifier key(s).
##
## - push_characters "string" - pushes given string into
## input queue.
##
## - require_runnable "action" - checks whether given action
## is runnable and fails if it isn't. This is especially
## useful when mixed with previous two functions. Consider
## the following macro definition:
##
## def_key "key"
## push_characters "custom_filter"
## apply_filter
##
## If apply_filter can't be currently run, we end up with
## sequence of characters in input queue which will be
## treated just as we typed them. This may lead to unexpected
## results (in this case 'c' will most likely clear current
## playlist, 'u' will trigger database update, 's' will stop
## playback etc.). To prevent such thing from happening, we
## need to change above definition to this one:
##
## def_key "key"
## require_runnable "apply_filter"
## push_characters "custom_filter"
## apply_filter
##
## Here, first we test whether apply_filter can be actually run
## before we stuff characters into input queue, so if condition
## is not met, whole chain is aborted and we're fine.
##
## - require_screen "screen" - checks whether given screen is
## currently active. accepted values: browser, clock, help,
## media_library, outputs, playlist, playlist_editor,
## search_engine, tag_editor, visualizer, last_fm, lyrics,
## selected_items_adder, server_info, song_info,
## sort_playlist_dialog, tiny_tag_editor.
##
## - run_external_command "command" - runs given command using
## system() function.
##
## 5) In addition to binding to a key, you can also bind actions
## or chains of actions to a command. If it comes to commands,
## syntax is very similar to defining keys. Here goes example
## definition of a command:
##
## def_command "quit" [deferred]
## stop
## quit
##
## If you execute the above command (which can be done by
## invoking action execute_command, typing 'quit' and pressing
## enter), ncmpcpp will stop the player and then quit. Note the
## presence of word 'deferred' enclosed in square brackets. It
## tells ncmpcpp to wait for confirmation (ie. pressing enter)
## after you typed quit. Instead of 'deferred', 'immediate'
## could be used. Then ncmpcpp will not wait for confirmation
## (enter) and will execute the command the moment it sees it.
##
## Note: while command chains are executed, internal environment
## update (which includes current window refresh and mpd status
## update) is not performed for performance reasons. However, it
## may be desirable to do so in some situration. Therefore it's
## possible to invoke by hand by performing 'update enviroment'
## action.
##
## Note: There is a difference between:
##
## def_key "key"
## action1
##
## def_key "key"
## action2
##
## and
##
## def_key "key"
## action1
## action2
##
## First one binds two single actions to the same key whilst
## second one defines a chain of actions. The behavior of
## these two is different and is described in (1) and (2).
##
## Note: Function def_key accepts non-ascii characters.
##
##### List of unbound actions #####
##
## The following actions are not bound to any key/command:
##
## - set_volume
##
#
#def_key "mouse"
# mouse_event
#
#def_key "up"
# scroll_up
#
#def_key "shift-up"
# select_item
# scroll_up
#
#def_key "down"
# scroll_down
#
#def_key "shift-down"
# select_item
# scroll_down
#
#def_key "["
# scroll_up_album
#
#def_key "]"
# scroll_down_album
#
#def_key "{"
# scroll_up_artist
#
#def_key "}"
# scroll_down_artist
#
#def_key "page_up"
# page_up
#
#def_key "page_down"
# page_down
#
#def_key "home"
# move_home
#
#def_key "end"
# move_end
#
#def_key "insert"
# select_item
#
#def_key "enter"
# enter_directory
#
#def_key "enter"
# toggle_output
#
#def_key "enter"
# run_action
#
#def_key "enter"
# play_item
#
#def_key "space"
# add_item_to_playlist
#
#def_key "space"
# toggle_lyrics_update_on_song_change
#
#def_key "space"
# toggle_visualization_type
#
#def_key "delete"
# delete_playlist_items
#
#def_key "delete"
# delete_browser_items
#
#def_key "delete"
# delete_stored_playlist
#
#def_key "right"
# next_column
#
#def_key "right"
# slave_screen
#
#def_key "right"
# volume_up
#
#def_key "+"
# volume_up
#
#def_key "left"
# previous_column
#
#def_key "left"
# master_screen
#
#def_key "left"
# volume_down
#
#def_key "-"
# volume_down
#
#def_key ":"
# execute_command
#
#def_key "tab"
# next_screen
#
#def_key "shift-tab"
# previous_screen
#
#def_key "f1"
# show_help
#
#def_key "1"
# show_playlist
#
#def_key "2"
# show_browser
#
#def_key "2"
# change_browse_mode
#
#def_key "3"
# show_search_engine
#
#def_key "3"
# reset_search_engine
#
#def_key "4"
# show_media_library
#
#def_key "4"
# toggle_media_library_columns_mode
#
#def_key "5"
# show_playlist_editor
#
#def_key "6"
# show_tag_editor
#
#def_key "7"
# show_outputs
#
#def_key "8"
# show_visualizer
#
#def_key "="
# show_clock
#
#def_key "@"
# show_server_info
#
#def_key "s"
# stop
#
#def_key "p"
# pause
#
#def_key ">"
# next
#
#def_key "<"
# previous
#
#def_key "ctrl-h"
# jump_to_parent_directory
#
#def_key "ctrl-h"
# replay_song
#
#def_key "backspace"
# jump_to_parent_directory
#
#def_key "backspace"
# replay_song
#
#def_key "f"
# seek_forward
#
#def_key "b"
# seek_backward
#
#def_key "r"
# toggle_repeat
#
#def_key "z"
# toggle_random
#
#def_key "y"
# save_tag_changes
#
#def_key "y"
# start_searching
#
#def_key "y"
# toggle_single
#
#def_key "R"
# toggle_consume
#
#def_key "Y"
# toggle_replay_gain_mode
#
#def_key "T"
# toggle_add_mode
#
#def_key "|"
# toggle_mouse
#
#def_key "#"
# toggle_bitrate_visibility
#
#def_key "Z"
# shuffle
#
#def_key "x"
# toggle_crossfade
#
#def_key "X"
# set_crossfade
#
#def_key "u"
# update_database
#
#def_key "ctrl-s"
# sort_playlist
#
#def_key "ctrl-s"
# toggle_browser_sort_mode
#
#def_key "ctrl-s"
# toggle_media_library_sort_mode
#
#def_key "ctrl-r"
# reverse_playlist
#
#def_key "ctrl-f"
# apply_filter
#
#def_key "ctrl-_"
# select_found_items
#
#def_key "/"
# find
#
#def_key "/"
# find_item_forward
#
#def_key "?"
# find
#
#def_key "?"
# find_item_backward
#
#def_key "."
# next_found_item
#
#def_key ","
# previous_found_item
#
#def_key "w"
# toggle_find_mode
#
#def_key "e"
# edit_song
#
#def_key "e"
# edit_library_tag
#
#def_key "e"
# edit_library_album
#
#def_key "e"
# edit_directory_name
#
#def_key "e"
# edit_playlist_name
#
#def_key "e"
# edit_lyrics
#
#def_key "i"
# show_song_info
#
#def_key "I"
# show_artist_info
#
#def_key "g"
# jump_to_position_in_song
#
#def_key "l"
# show_lyrics
#
#def_key "ctrl-v"
# select_range
#
#def_key "v"
# reverse_selection
#
#def_key "V"
# remove_selection
#
#def_key "B"
# select_album
#
#def_key "a"
# add_selected_items
#
#def_key "c"
# clear_playlist
#
#def_key "c"
# clear_main_playlist
#
#def_key "C"
# crop_playlist
#
#def_key "C"
# crop_main_playlist
#
#def_key "m"
# move_sort_order_up
#
#def_key "m"
# move_selected_items_up
#
#def_key "n"
# move_sort_order_down
#
#def_key "n"
# move_selected_items_down
#
#def_key "M"
# move_selected_items_to
#
#def_key "A"
# add
#
#def_key "S"
# save_playlist
#
#def_key "o"
# jump_to_playing_song
#
#def_key "G"
# jump_to_browser
#
#def_key "G"
# jump_to_playlist_editor
#
#def_key "~"
# jump_to_media_library
#
#def_key "E"
# jump_to_tag_editor
#
#def_key "U"
# toggle_playing_song_centering
#
#def_key "P"
# toggle_display_mode
#
#def_key "\\"
# toggle_interface
#
#def_key "!"
# toggle_separators_between_albums
#
#def_key "L"
# toggle_lyrics_fetcher
#
#def_key "F"
# fetch_lyrics_in_background
#
#def_key "alt-l"
# toggle_fetching_lyrics_in_background
#
#def_key "ctrl-l"
# toggle_screen_lock
#
#def_key "`"
# toggle_library_tag_type
#
#def_key "`"
# refetch_lyrics
#
#def_key "`"
# add_random_items
#
#def_key "ctrl-p"
# set_selected_items_priority
#
#def_key "q"
# quit
#

547
.config/.ncmpcpp/config Normal file
View File

@ -0,0 +1,547 @@
##############################################################################
## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ##
## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences. ##
##############################################################################
#
##### directories ######
##
## Directory for storing ncmpcpp related files. Changing it is useful if you
## want to store everything somewhere else and provide command line setting for
## alternative location to config file which defines that while launching
## ncmpcpp.
##
#
ncmpcpp_directory = ~/.ncmpcpp
#
##
## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
## MPD clients (eg. ncmpc) also use that location.
##
#
#lyrics_directory = ~/.lyrics
#
##### connection settings #####
#
mpd_host = localhost
#
mpd_port = 6600
#
#mpd_connection_timeout = 5
#
## Needed for tag editor and file operations to work.
##
mpd_music_dir = ~/Music
#
#mpd_crossfade_time = 5
#
##### music visualizer #####
##
## Note: In order to make music visualizer work you'll need to use mpd fifo
## output, whose format parameter has to be set to 44100:16:1 for mono
## visualization or 44100:16:2 for stereo visualization. Example configuration
## (it has to be put into mpd.conf):
##
## audio_output {
## type "fifo"
## name "Visualizer feed"
## path "/tmp/mpd.fifo"
## format "44100:16:2"
## }
##
#
visualizer_fifo_path = /tmp/mpd.fifo
#
##
## Note: Below parameter is needed for ncmpcpp to determine which output
## provides data for visualizer and thus allow syncing between visualization and
## sound as currently there are some problems with it.
##
#
visualizer_output_name = "my_fifo"
#
##
## If you set format to 44100:16:2, make it 'yes'.
##
visualizer_in_stereo = yes
#
##
## Note: Below parameter defines how often ncmpcpp has to "synchronize"
## visualizer and audio outputs. 30 seconds is optimal value, but if you
## experience synchronization problems, set it to lower value. Keep in mind
## that sane values start with >=10.
##
#
visualizer_sync_interval = 30
#
##
## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
## with fftw3 support.
##
#
## Available values: spectrum, wave, wave_filled, ellipse.
##
visualizer_type = "spectrum"
#
# visualizer_look = "+|"
visualizer_look = "▋▋"
#
visualizer_color = blue, cyan, green, yellow, magenta, red
#
## Alternative subset of 256 colors for terminals that support it.
##
# visualizer_color = "white"
#
##### system encoding #####
##
## ncmpcpp should detect your charset encoding but if it failed to do so, you
## can specify charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build supports charset detection by
## checking output of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
## if your encoding is different.
##
#
#system_encoding = ""
#
##### delays #####
#
## Time of inactivity (in seconds) after playlist highlighting will be disabled
## (0 = always on).
##
#playlist_disable_highlight_delay = 5
#
## Defines how long messages are supposed to be visible.
##
#message_delay_time = 5
#
##### song format #####
##
## For a song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## If you want to make sure that a part of the format is displayed only when
## certain tags are present, you can archieve it by grouping them with brackets,
## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
## present or '' otherwise. It is also possible to define a list of
## alternatives by providing several groups and separating them with '|',
## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
## not present.
##
## Note: If you want to set limit on maximal length of a tag, just put the
## appropriate number between % and character that defines tag type, e.g. to
## make album take max. 20 terminal cells, use '%20b'.
##
## In addition, formats support markers used for text attributes. They are
## followed by character '$'. After that you can put:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use a non-color attribute anymore, just put it again,
## but this time insert character '/' between '$' and attribute character,
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
## reversed colors.
##
## If you want to use 256 colors and/or background colors in formats (the naming
## scheme is described below in section about color definitions), it can be done
## with the syntax $(COLOR), e.g. to set the artist tag to one of the
## non-standard colors and make it have yellow background, you need to write
## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
## with attributes listed above.
##
## Note: colors can be nested.
##
#
song_list_format = (6)[]{} (23)[red]{a} (26)[yellow]{t|f} (40)[green]{b} (4)[blue]{l}
#
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#
#song_library_format = {%n - }{%t}|{%f}
#
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
#
#current_item_prefix = $(yellow)$r
#
#current_item_suffix = $/r$(end)
#
#current_item_inactive_column_prefix = $(white)$r
#
#current_item_inactive_column_suffix = $/r$(end)
#
now_playing_prefix = $b
#
now_playing_suffix = $8$/b
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = $6
#
#selected_item_suffix = $9
#
#modified_item_prefix = $3> $9
#
##
## Note: attributes are not supported for the following variables.
##
#song_window_title_format = {%a - }{%t}|{%f}
##
## Note: Below variables are used for sorting songs in browser. The sort mode
## determines how songs are sorted, and can be used in combination with a sort
## format to specify a custom sorting format. Available values for
## browser_sort_mode are "name", "mtime", "format" and "noop".
##
#
#browser_sort_mode = name
#
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
#
##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of the column)[color of the column]{displayed tag}
##
## Note: Width is by default in %, if you want a column to have fixed size, add
## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
## screen (so the real width will depend on actual screen size), whereas
## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
## is.
##
## - color is optional (if you want the default one, leave the field empty).
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes, separated with
## character ':', e.g. {lr:Length} gives you right aligned column of lengths
## named "Length".
##
## - define sequence of tags, that have to be displayed in case predecessor is
## empty in a way similar to the one in classic song format, i.e. using '|'
## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
## display artist tag and then composer and performer if previous ones are not
## available.
##
#
song_columns_list_format = (6)[]{} (23)[red]{a} (26)[yellow]{t|f} (40)[green]{b} (4)[blue]{l}
#
##### various settings #####
#
##
## Note: Custom command that will be executed each time song changes. Useful for
## notifications etc.
##
# execute_on_song_change = "~/.ncmpcpp/art.sh"
# song_list_format = " $2%t $R$5%a "
#
##
## Note: Custom command that will be executed each time player state
## changes. The environment variable MPD_PLAYER_STATE is set to the current
## state (either unknown, play, pause, or stop) for its duration.
##
#
#execute_on_player_state_change = ""
#
#playlist_show_mpd_host = no
#
#playlist_show_remaining_time = no
#
playlist_shorten_total_times = yes
#
#playlist_separate_albums = no
#
##
## Note: Possible display modes: classic, columns.
##
#playlist_display_mode = columns
#
browser_display_mode = "columns"
#
search_engine_display_mode = "columns"
#
playlist_editor_display_mode = "columns"
#
#discard_colors_if_item_is_selected = yes
#
#show_duplicate_tags = yes
#
#incremental_seeking = yes
#
#seek_time = 1
#
#volume_change_step = 2
#
#autocenter_mode = no
#
#centered_cursor = no
#
##
## Note: You can specify third character which will be used to build 'empty'
## part of progressbar.
##
#progressbar_look = =>
progressbar_look = "─o "
#
## Available values: database, playlist.
##
#default_place_to_search_in = database
#
## Available values: classic, alternative.
##
#user_interface = classic
#
#data_fetching_delay = yes
#
## Available values: artist, album_artist, date, genre, composer, performer.
##
#media_library_primary_tag = artist
#
#media_library_albums_split_by_date = yes
#
## Available values: wrapped, normal.
##
#default_find_mode = wrapped
#
#default_tag_editor_pattern = %n - %t
#
header_visibility = no
#
statusbar_visibility = no
#
titles_visibility = no
#
#header_text_scrolling = yes
#
#cyclic_scrolling = no
#
#lines_scrolled = 2
#
#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet
#
#follow_now_playing_lyrics = no
#
#fetch_lyrics_for_current_song_in_background = no
#
#store_lyrics_in_song_dir = no
#
#generate_win32_compatible_filenames = yes
#
allow_for_physical_item_deletion = yes
#
##
## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
## language you set and if it fails, it will fall back to english. Otherwise it
## will use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
##
#lastfm_preferred_language = en
#
#space_add_mode = add_remove
#
#show_hidden_files_in_local_browser = no
#
##
## How shall screen switcher work?
##
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
## lyrics, last_fm.
##
#screen_switcher_mode = playlist, browser
#
##
## Note: You can define startup screen by choosing screen from the list above.
##
#startup_screen = playlist
#
##
## Note: You can define startup slave screen by choosing screen from the list
## above or an empty value for no slave screen.
##
#startup_slave_screen = ""
#
#startup_slave_screen_focus = no
#
##
## Default width of locked screen (in %). Acceptable values are from 20 to 80.
##
#
#locked_screen_width_part = 50
#
#ask_for_locked_screen_width_part = yes
#
#jump_to_now_playing_song_at_start = yes
#
#ask_before_clearing_playlists = yes
#
#clock_display_seconds = no
#
#display_volume_level = yes
#
display_bitrate = no
#
#display_remaining_time = no
#
## Available values: none, basic, extended, perl.
##
#regular_expressions = perl
#
##
## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
## sorting items in browser, tags in media library, etc.
##
#ignore_leading_the = no
#
##
## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
## filtering lists. This takes an effect only if boost was compiled with ICU
## support.
##
#ignore_diacritics = no
#
#block_search_constraints_change_if_items_found = yes
#
mouse_support = no
#
#mouse_list_scroll_whole_page = yes
#
#empty_tag_marker = <empty>
#
#tags_separator = " | "
#
#tag_editor_extended_numeration = no
#
#media_library_sort_by_mtime = no
#
enable_window_title = yes
#
##
## Note: You can choose default search mode for search engine. Available modes
## are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
##
## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
## if your mpd is on a remote machine, downloading big database to process
## it can take a while
##
## - 3 - match only exact values (this mode uses mpd function for searching in
## database and local one for searching in current playlist)
##
#
#search_engine_default_search_mode = 1
#
external_editor = nano
#
## Note: set to yes if external editor is a console application.
##
#use_console_editor = yes
#
##### colors definitions #####
##
## It is possible to set a background color by setting a color value
## "<foreground>_<background>", e.g. red_black will set foregound color to red
## and background color to black.
##
## In addition, for terminals that support 256 colors it is possible to set one
## of them by using a number in range [1, 256] instead of color name,
## e.g. numerical value corresponding to red_black is 2_1. To find out if the
## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
## help screen for list of available colors and their numerical values.
##
## What is more, there are two special values for the background color:
## "transparent" and "current". The first one explicitly sets the background to
## be transparent, while the second one allows you to preserve current
## background color and change only the foreground one. It's used implicitly
## when background color is not specified.
##
## Moreover, it is possible to attach format information to selected color
## variables by appending to their end a colon followed by one or more format
## flags, e.g. black:b or red:ur. The following variables support this syntax:
## visualizer_color, color1, color2, empty_tag_color, volume_color,
## state_line_color, state_flags_color, progressbar_color,
## progressbar_elapsed_color, player_state_color, statusbar_time_color,
## alternative_ui_separator_color.
##
## Note: due to technical limitations of older ncurses version, if 256 colors
## are used there is a possibility that you'll be able to use only colors with
## transparent background.
#
colors_enabled = yes
#
#empty_tag_color = cyan
#
#header_window_color = default
#
volume_color = default
#
#state_line_color = default
#
#state_flags_color = default:b
#
#main_window_color = yellow
#
#color1 = white
#
#color2 = green
#
progressbar_color = "black"
#
progressbar_elapsed_color = "white"
#
statusbar_color = "white"
#
#statusbar_time_color = default:b
#
#player_state_color = default:b
#
#alternative_ui_separator_color = black:b
#
#window_border_color = green
#
#active_window_border = red
#

270
.config/compton.conf Normal file
View File

@ -0,0 +1,270 @@
################################################################################
#
# Backend
#
################################################################################
# Backend to use: "xrender" or "glx".
# GLX backend is typically much faster but depends on a sane driver.
# backend = "xrender";
backend = "glx";
################################################################################
#
# GLX Backend
#
################################################################################
glx-no-stencil = true;
# GLX backend: Copy unmodified regions from front buffer instead of redrawing
# them all.
glx-copy-from-front = false;
# GLX backend: Use MESA_copy_sup_bufer to do bartial screen update.
# Overrides --glx-copy-from-front
# glx-use-copysubbuffermesa = true;
# GLX backend: Avoid rebinding pixmap on window damage.
# Probably could improve performance on rapid window content changes, but is
# known to break things on some drivers (LLVMpipe).
# Recommended if it works.
# glx-no-rebind-pixmap = true;
# GLX backend: GLX buffer swap method we assume.
# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).
# undefined is the slowest and the safest, and the default value.
# copy is fastest, but may fail on some drivers.
# 2-5 are gradually slower but safer (6 is still faster than 0).
# Usually, double buffer means 2, triple buffer means 3.
# buffer-age means auto-detect using GTX_EXT_buffer_age, supported by some
# drivers.
# Useless with --glx-use-copysubbeffermesa.
# Partially breaks --resize-damage
# Defaults to undefined;
glx-swap-method = "undefined";
# glx-use-gpushader4 = true;
################################################################################
#
# X Render Backend
#
################################################################################
# xrender-sync = true;
# xrender-sync-fence = true;
################################################################################
#
# Shadow
#
################################################################################
# Enabled client-side shadows on windows.
shadow = true;
# Don’t draw shadows on DND windows.
no-dnd-shadow = true;
# Avoid drawing shadows on dock/panel windows.
no-dock-shadow = true;
# Zero the part of the shadow’s mask behind the window. Fix some weirdness with
# ARGB windows.
clear-shadow = true;
# The blur radius for the shadow (default 12)
shadow-radius = 7;
# The left offset for shadows. (default -15)
shadow-offset-x = -5;
# The top offset for shadows. (default -15)
shadow-offset-y = -5;
# The translucency for shadows. (defalt .75)
shadow-opacity = 0.85;
# Set if you want different colour shadows
# RGB calculate: 128*100/255/100 = 0.50
# shadow-red = 0.0;
# shadow-green = 0.0;
# shadow-blue = 0.0;
# The shadow exclude options are helpful if you have shadows enabled. Due to the
# way compton draws its shadows, certain applications will have visual glitches.
# (most applications are fine, only apps that do weird things with xshapes or
# argb are affected)
shadow-exclude = [
"name = 'Notification'",
# "class_g = 'Conky'",
# "class_g ?= 'Notify-osd'",
# "class_g = 'Cairo-clock'",
"_GTK_FRAME_EXTENTS@:c"
];
# Avoid drawing shadow on all shaped windows
# (see also: --detect-rounded-corners)
shadow-ignore-shaped = false;
# shadow-exclude = "n:e:Notification";
# shadow-exclude-reg = "x10+0+0";
# xinerama-shadow-crop = true;
################################################################################
#
# Opacity
#
################################################################################
menu-opacity = 0.9;
inactive-opacity = 0.6;
active-opacity = 1;
frame-opacity = 0.6;
inactive-opacity-override = true;
alpha-step = 0.06;
# Dim inactive windows. (0.0 - 1.0)
# inactive-dim = 0.2;
# Do not let dimness adjust based on window opacity
# inactive-dim-fixed = true;
# Blur backgound of transparent windows. Bad performance with X Render backend.
# GLX is preffered.
blur-method = "kawase";
blur-strength = 12;
blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
blur-background = true;
# Blur background of opaque windows with transparent frames as well.
# blur-background-frame = true;
# Do not let blur radius adjust based on window opacity
blur-background-fixed = false;
blur-background-exclude = [
"window_type = 'desktop'",
"class_g = 'Polybar'",
"_GTK_FRAME_EXTENTS@:c"
];
opacity-rule = [
"70:class_g = 'UXTerm'",
"65:class_g = 'Polybar'",
"80:class_g = 'St'"
];
################################################################################
#
# Fading
#
################################################################################
# Fade windows during opacity changes
fading = true;
# The time between steps in a fade in milliseconds. (default 10)
fade-delta = 50;
# Opacity change between steps while fading in. (default 0.028)
fade-in-step = 0.09;
# Opacity change between steps while fading out. (default 0.03)
fade-out-step = 0.08;
# Fade windows in/out when opening/closing
no-fading-openclose = true;
# no-fading-destroyed-argb = true;
# Specify a list of conditions of windows that should not be faded.
fade-exclude = [ ];
################################################################################
#
# Other
#
################################################################################
# Try to detect WM windows and mark them as active
mark-wmwin-focused = true;
# Mark all non-WM but override-redirect windows active (e.g. menus)
mark-ovredir-focused = true;
# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of
# using FocusIn/Out events.
# Usually more reliable but depends on a EWMH-compliant WM.
use-ewmh-active-win = true;
# Detect rounded corners and treat them as rectangular when
# --shadow-ignore-shaped is on
detect-rounded-corners = true;
# Detect _NET_WM_OPACITY on client windows, useful for window managers not
# passing _NET_WN_OPACITY of client windows to frame windows.
# This prefents opacity being ignored for some apps.
detect-client-opacity = true;
# Specify refresh rate of the screen.
# If not specified or 0, compton will try detecting this with X RandR extension.
refresh-rate = 60;
# Set VSync method. VSync methods currently available:
# none: No VSync
# drm: VSync with DRM_IOCTL_WAIT_VBLANK. May only work on some drivers.
# opengl: Try to VSync with SGI_video_sync OpenGL extension. Only work on some
# drivers
# opengl-oml: Try to VSync with OML_sync_control OpenGL extension. Only work on
# some drivers.
# opengl-swc: Try to VSync with SGI_swap_control OpenGL extension. Only work on
# some drivers. Work only with a GLX backend. Known to be most
# effective on many drivers. Does not actually control paint timing,
# only buffer swap is affected, so it doesn’t have the effect of
# --sw-opti unlike other methods. Experimental.
# opengl-mswc: Try to VSync with MESA_swap_control OpenGL extension. Basically
# the same as opengl-swc above, except the extension we use.
# (Note some VSync methods may not be enabled at compile time.)
vsync = "none";
# Enable DPE painting mode, inteded to use with VSync to (hopefuly) eliminate
# tearing.
# Reported to have no effect though.
dbe = false;
# Painting on X Composite overlay window. Recommended.
paint-on-overlay = true;
# Limit comtpon to repaint at most every 1 / refresh_rate second to boost
# performance.
# This should not be used with --vsync drm/opengl/opengl-oml as they essentially
# do --sw-opti’ job already.
# Unless you wish to specify a lower refresh rate than the actual value.
sw-opti = false;
# Unredirect all windows if a full-screen opaque window is detected, to maximize
# performance for full-screen windows, like games.
# Known to cause flickering when redirecting/unredirecting windows.
# paint-on-overlay may make the flickering less obvious.
# unredir-if-possible = true;
# unredir-if-possible-delay = 5000;
# unredir-if-possible-exclude = [ ];
# Specify a list of conditions of windows that should always be considered
# focused
focus-exclude = [
# "class_g = 'Cairo-clock'"
];
# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group
# focused at the same time
detect-transient = true;
# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group
# focused at the same time.
# WM_TRANSIENT_FOR has a higher priority if --detect-transient is enabled, too.
detect-client-leader = true;
invert-color-include = [ ];
# resize-damage = 1;
################################################################################
#
# Window type settings
#
################################################################################
wintypes:
{
tooltip =
{
# fade: Fade the particular type of windows.
fade = false;
# shadow: Give those windows shadows.
shadow = true;
# opacity: Default opacity for the type of windows.
opacity: 0.85;
# focus: Whether to always consider windows of this type focused.
focus = true;
}
};

6
.config/i3/battery.sh Executable file
View File

@ -0,0 +1,6 @@
#!/bin/bash
BATTINFO=`acpi -b`
if [[ `echo $BATTINFO | grep Discharging` && `echo $BATTINFO | cut -f 5 -d " "` < 00:15:00 ]] ; then
DISPLAY=:0.0 /usr/bin/notify-send "low battery" "$BATTINFO"
fi

267
.config/i3/config Normal file
View File

@ -0,0 +1,267 @@
# Declaration of the mod key
set $mod Mod4
set $alt Mod1
# Font for window titles
font pango:monospace 8
# Variables
set $up Up
set $down Down
set $left Left
set $right Right
set $exiti3 "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
set $lockscreen "Lucien Cartier-Tilet\n(Phuntsok Drak-pa)\n+33 (0)6 83 90 56 89"
set $rofiexec "rofi -combi-modi window,drun -show combi -mohh combi -m -1"
set $execgnus "exec emacsclient --create-frame --eval '(gnus)'"
set $term st
# use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
################################################################################
### Clients position ###
################################################################################
assign [class="discord"] 10
assign [class="Emacs"] 2
assign [class="Chromium"] 3
assign [class="Nemo"] 4
assign [class="Godot"] 5
assign [class="Gimp*"] 6
assign [class="Steam"] 9
################################################################################
### Shortcuts ###
################################################################################
# start a terminal
bindsym $mod+Return exec $term
bindsym Ctrl+$mod+Return exec emacsclient --eval "(eshell-new)" --create-frame
bindsym $mod+$alt+Return split h;; exec $term
bindsym $mod+Shift+Return split v;; exec $term
# kill focused window
bindsym $mod+q kill
bindsym $alt+F4 kill
# program launcher
bindsym $mod+Shift+d exec --no-startup-id j4-dmenu-desktop
bindsym $mod+d exec --no-startup-id $rofiexec
bindsym $mod+w exec --no-startup-id rofi-wifi-menu
# change focus
bindsym $mod+$left focus left
bindsym $mod+$down focus down
bindsym $mod+$up focus up
bindsym $mod+$right focus right
# move focused window
bindsym $mod+Shift+$left move left
bindsym $mod+Shift+$down move down
bindsym $mod+Shift+$up move up
bindsym $mod+Shift+$right move right
# Change split
bindsym $mod+h split h
bindsym $mod+v split v
bindsym $mod+t split toggle
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# center floating window
bindsym Ctrl+$mod+c move position center
# Scratchpad
bindsym $mod+Shift+s move scratchpad
bindsym $mod+s scratchpad show
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# move to previous or next workspace
bindsym $mod+Tab workspace next
bindsym $mod+Shift+Tab workspace previous
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace
bindsym $mod+Shift+r restart
# exit i3
bindsym $mod+Shift+e exec $exiti3
# resize window (you can also use the mouse for that)
mode "resize" {
bindsym $right resize grow width 20 px or 10 ppt
bindsym $left resize shrink width 10 px or 5 ppt
bindsym $down resize grow height 10 px or 5 ppt
bindsym $up resize shrink height 10 px or 5 ppt
bindsym Return mode "default"
bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"
mouse_warping none
# Keyboard layout
bindsym $mod+$alt+k exec setxkbmap fr bepo
bindsym $mod+$alt+Shift+k exec setxkbmap fr
bindsym $mod+$alt+Ctrl+k exec setxkbmap us
# bindings for MS Natural Ergonomic Keyboard 4000 ##############################
bindsym XF86Launch5 exec emacsclient --create-frame
bindsym $mod+e exec emacsclient --create-frame
bindsym XF86Launch6 exec chromium
bindsym $mod+c exec chromium
bindsym XF86HomePage exec chromium https://labs.phundrak.fr
bindsym XF86Search exec chromium https://www.google.com
bindsym XF86Launch9 exec nemo
bindsym $mod+n exec nemo
bindsym XF86Launch8 $execgnus
bindsym XF86Mail $execgnus
bindsym $mod+m $execgnus
bindsym XF86Launch7 exec discord-canary
bindsym Ctrl+Shift+d exec discord-canary
bindsym XF86AudioMute exec amixer -D pulse set Master 1+ toggle
bindsym Ctrl+$mod+Prior exec amixer -D pulse -q set Master 2%+ unmute
bindsym XF86AudioRaiseVolume exec amixer -D pulse -q set Master 2%+ unmute
bindsym Ctrl+$mod+Next exec amixer -D pulse -q set Master 2%- unmute
bindsym XF86AudioLowerVolume exec amixer -D pulse -q set Master 2%- unmute
bindsym XF86Calculator exec /usr/bin/speedcrunch
bindsym $mod+$alt+c exec /usr/bin/speedcrunch
#bindsym XF86Favourites
#bindsym Help
#bindsym Undo
#bindsym Redo
#bindsym XF86New
#bindsym SunOpen
#bindsym XF86Close
#bindsym XF86Reply
#bindsym XF86MailForward
#bindsym XF86Send
#bindsym XF86Save
bindsym $mod+F3 exec arandr
# Brightness keyboard shortcuts
bindsym XF86MonBrightnessUp exec light -A 5
bindsym XF86MonBrightnessDown exec light -U 5
# Wal
bindsym $mod+Ctrl+w exec wal -i ~/.config/Wallpapers -o wal-set
# Take a screenshot
bindsym --release Print exec --no-startup-id scrot
bindsym --release Ctrl+Print exec --no-startup-id scrot -s
bindsym Shift+Print exec --no-startup-id scrot -d 3
# Lock screen
bindsym $mod+l exec i3lock -fol
bindsym $mod+$alt+h exec i3lock -fol && systemctl suspend
bindsym $mod+Shift+h exec i3lock -fol && systemctl hibernate
# SSH terminals
bindsym $mod+$alt+m exec $term ssh Mila
bindsym $mod+$alt+t exec $term ssh Tilo
bindsym $mod+$alt+n exec $term ssh Naro
# Utilities
bindsym $mod+Ctrl+h exec $term htop
# Music shortcuts
bindsym $alt+XF86AudioRaiseVolume exec mpc next
bindsym $mod+Next exec mpc next
bindsym $alt+XF86AudioLowerVolume exec mpc prev
bindsym $mod+Prior exec mpc prev
bindsym XF86AudioPlay exec mpc toggle
bindsym $mod+p exec mpc toggle
bindsym $mod+$alt+p exec mpc stop
bindsym $alt+XF86AudioPlay exec mpc stop
# below, 7 and 8 are the emplacement for `+` and `-` on the bépo layout
# respectively, hence the order
bindsym $mod+$alt+7 exec mpc volume +5
bindsym $mod+$alt+8 exec mpc volume -5
bindsym $mod+Shift+n exec $term ncmpcpp -q
bindsym $mod+Shift+v exec $term ncmpcpp -qs visualizer
################################################################################
# i3-gaps settings #
################################################################################
smart_gaps on
gaps inner 20
gaps outer -10
border_radius 10
popup_during_fullscreen leave_fullscreen
workspace_auto_back_and_forth yes
focus_follows_mouse off
# Change gaps size
bindsym $mod+g gaps inner current plus 5
bindsym $mod+Shift+g gaps inner current minus 5
bindsym $mod+Ctrl+g gaps outer current plus 5
bindsym $mod+Ctrl+Shift+g gaps outer current minus 5
bindsym $mod+$alt+g gaps inner all set 20; gaps outer all set -10
default_border pixel 0
smart_borders on
################################################################################
# Modules startup #
################################################################################
exec_always --no-startup-id ~/dotfiles/enable_thouch.sh
exec_always --no-startup-id ~/.config/polybar/launch.sh
exec_always --no-startup-id wal -i "$(< "${HOME}/.cache/wal/wal")"
exec --no-startup-id xss-lock -- i3lock-fancy -t $lockscreen
exec --no-startup-id "xrdb $HOME/.Xresources"
exec --no-startup-id xfce4-power-manager
exec --no-startup-id compton -F --opengl --config ~/.config/compton.conf -e 1
exec --no-startup-id redshift-gtk
exec --no-startup-id mpd
exec --no-startup-id mpc stop
exec --no-startup-id syndaemon -i 1.0 -t -k
exec --no-startup-id sleep 3; emacs --eval "(server-start)"
exec --no-startup-id mpd_discord_richpresence --no-idle --fork
exec --no-startup-id i3-battery-popup -N -t 2m
################################################################################
# Set colors from Xresources #
################################################################################
set_from_resource $fg i3wm.color7 #f0f0f0
set_from_resource $bg i3wm.color2 #f0f0f0
# class border backgr. text indicator child_border
client.focused $bg $bg $fg $bg $bg
client.focused_inactive $bg $bg $fg $bg $bg
client.unfocused $bg $bg $fg $bg $bg
client.urgent $bg $bg $fg $bg $bg
client.placeholder $bg $bg $fg $bg $bg
# client.background $bg

31
.config/mpd/mpd.conf Normal file
View File

@ -0,0 +1,31 @@
# Requested files
db_file "~/.config/mpd/database"
log_file "~/.config/mpd/log"
#Optional files
music_directory "~/Music"
playlist_directory "~/.config/mpd/playlists"
pid_file "~/.config/mpd/pid"
state_file "~/.config/mpd/state"
sticker_file "~/.config/mpd/sticker.sql"
bind_to_address "localhost"
max_output_buffer_size "16304"
audio_output {
type "alsa"
name "mpd alsamixer-output"
mixer_type "software"
}
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
format "44100:16:2"
}
audio_output {
type "pulse"
name "pulse audio"
}

BIN
.config/mpd/sticker.sql Normal file
View File

Binary file not shown.

182
.config/mpv/input.conf Normal file
View File

@ -0,0 +1,182 @@
# mpv keybindings
#
# Location of user-defined bindings: ~/.config/mpv/input.conf
#
# Lines starting with # are comments. Use SHARP to assign the # key.
# Copy this file and uncomment and edit the bindings you want to change.
#
# List of commands and further details: DOCS/man/input.rst
# List of special keys: --input-keylist
# Keybindings testing mode: mpv --input-test --force-window --idle
#
# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
#
# Strings need to be quoted and escaped:
# KEY show-text "This is a single backslash: \\ and a quote: \" !"
#
# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
#
# The default keybindings are hardcoded into the mpv binary.
# You can disable them completely with: --no-input-default-bindings
# Developer note:
# On compilation, this file is baked into the mpv binary, and all lines are
# uncommented (unless '#' is followed by a space) - thus this file defines the
# default key bindings.
# If this is enabled, treat all the following bindings as default.
#default-bindings start
#MBTN_LEFT ignore # don't do anything
#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen on/off
#MBTN_RIGHT cycle pause # toggle pause on/off
# Mouse wheels, touchpad or other input devices that have axes
# if the input devices supports precise scrolling it will also scale the
# numeric value accordingly
#WHEEL_UP seek 10
#WHEEL_DOWN seek -10
#WHEEL_LEFT add volume -2
#WHEEL_RIGHT add volume 2
## Seek units are in seconds, but note that these are limited by keyframes
#RIGHT seek 5
#LEFT seek -5
#UP seek 60
#DOWN seek -60
# Do smaller, always exact (non-keyframe-limited), seeks with shift.
# Don't show them on the OSD (no-osd).
#Shift+RIGHT no-osd seek 1 exact
#Shift+LEFT no-osd seek -1 exact
#Shift+UP no-osd seek 5 exact
#Shift+DOWN no-osd seek -5 exact
# Skip to previous/next subtitle (subject to some restrictions; see manpage)
#Ctrl+LEFT no-osd sub-seek -1
#Ctrl+RIGHT no-osd sub-seek 1
#PGUP add chapter 1 # skip to next chapter
#PGDWN add chapter -1 # skip to previous chapter
#Shift+PGUP seek 600
#Shift+PGDWN seek -600
#[ multiply speed 0.9091 # scale playback speed
#] multiply speed 1.1
#{ multiply speed 0.5
#} multiply speed 2.0
#BS set speed 1.0 # reset speed to normal
#q quit
Q quit-watch-later
#q {encode} quit 4
#ESC set fullscreen no
#ESC {encode} quit 4
#p cycle pause # toggle pause/playback mode
#. frame-step # advance one frame and pause
#, frame-back-step # go back by one frame and pause
#SPACE cycle pause
#> playlist-next # skip to next file
#ENTER playlist-next # skip to next file
#< playlist-prev # skip to previous file
#O no-osd cycle-values osd-level 3 1 # cycle through OSD mode
#o show-progress
P show-progress
#z add sub-delay -0.1 # subtract 100 ms delay from subs
#x add sub-delay +0.1 # add
#ctrl++ add audio-delay 0.100 # this changes audio/video sync
#ctrl+- add audio-delay -0.100
#9 add volume -2
/ add volume -2
#0 add volume 2
* add volume 2
m cycle mute
#1 add contrast -1
#2 add contrast 1
#3 add brightness -1
#4 add brightness 1
#5 add gamma -1
#6 add gamma 1
#7 add saturation -1
#8 add saturation 1
#Alt+0 set window-scale 0.5
#Alt+1 set window-scale 1.0
#Alt+2 set window-scale 2.0
# toggle deinterlacer (automatically inserts or removes required filter)
#d cycle deinterlace
#r add sub-pos -1 # move subtitles up
#t add sub-pos +1 # down
#v cycle sub-visibility
# stretch SSA/ASS subtitles with anamorphic videos to match historical
#V cycle sub-ass-vsfilter-aspect-compat
# switch between applying no style overrides to SSA/ASS subtitles, and
# overriding them almost completely with the normal subtitle style
#u cycle-values sub-ass-override "force" "no"
#j cycle sub # cycle through subtitles
#J cycle sub down # ...backwards
#SHARP cycle audio # switch audio streams
#_ cycle video
#T cycle ontop # toggle video window ontop of other windows
#f cycle fullscreen # toggle fullscreen
#s async screenshot # take a screenshot
#S async screenshot video # ...without subtitles
#Ctrl+s async screenshot window # ...with subtitles and OSD, and scaled
#Alt+s screenshot each-frame # automatically screenshot every frame
#w add panscan -0.1 # zoom out with -panscan 0 -fs
#e add panscan +0.1 # in
# cycle video aspect ratios; "-1" is the container aspect
#A cycle-values video-aspect "16:9" "4:3" "2.35:1" "-1"
#POWER quit
#PLAY cycle pause
#PAUSE cycle pause
#PLAYPAUSE cycle pause
#STOP quit
#FORWARD seek 60
#REWIND seek -60
#NEXT playlist-next
#PREV playlist-prev
#VOLUME_UP add volume 2
#VOLUME_DOWN add volume -2
#MUTE cycle mute
#CLOSE_WIN quit
#CLOSE_WIN {encode} quit 4
#E cycle edition # next edition
#l ab-loop # Set/clear A-B loop points
#L cycle-values loop-file "inf" "no" # toggle infinite looping
#ctrl+c quit 4
# Apple Remote section
#AR_PLAY cycle pause
#AR_PLAY_HOLD quit
#AR_CENTER cycle pause
#AR_CENTER_HOLD quit
#AR_NEXT seek 10
#AR_NEXT_HOLD seek 120
#AR_PREV seek -10
#AR_PREV_HOLD seek -120
#AR_MENU show-progress
#AR_MENU_HOLD cycle mute
#AR_VUP add volume 2
#AR_VUP_HOLD add chapter 1
#AR_VDOWN add volume -2
#AR_VDOWN_HOLD add chapter -1
#
# Legacy bindings (may or may not be removed in the future)
#
#! add chapter -1 # skip to previous chapter
#@ add chapter 1 # next
#
# Not assigned by default
# (not an exhaustive list of unbound commands)
#
# ? add sub-scale +0.1 # increase subtitle font size
# ? add sub-scale -0.1 # decrease subtitle font size
# ? sub-step -1 # immediately display next subtitle
# ? sub-step +1 # previous
# ? cycle angle # switch DVD/Bluray angle
# ? add balance -0.1 # adjust audio balance in favor of left
# ? add balance 0.1 # right
# ? cycle sub-forced-only # toggle DVD forced subs
# ? cycle program # cycle transport stream programs
# ? stop # stop playback (quit or enter idle mode)
I vf toggle format=yuv420p,vapoursynth=~~/motioninterpolation.vpy:4:4
M vf toggle hflip

74
.config/mpv/motioninterpolation.vpy Normal file
View File

@ -0,0 +1,74 @@
# vim: set ft=python:
# see the README at https://gist.github.com/phiresky/4bfcfbbd05b3c2ed8645
# source: https://github.com/mpv-player/mpv/issues/2149
# source: https://github.com/mpv-player/mpv/issues/566
# source: https://github.com/haasn/gentoo-conf/blob/nanodesu/home/nand/.mpv/filters/mvtools.vpy
import vapoursynth
core = vapoursynth.get_core()
# ref: http://avisynth.org.ru/mvtools/mvtools2.html#functions
# default is 400, less means interpolation will only happen when it will work well
ignore_threshold=140
# if n% of blocks change more than threshold then don't interpolate at all (default is 51%)
scene_change_percentage=15
dst_fps = display_fps
# Interpolating to fps higher than 60 is too CPU-expensive, smoothmotion can handle the rest.
# while (dst_fps > 60):
# dst_fps /= 2
if "video_in" in globals():
# realtime
clip = video_in
# Needed because clip FPS is missing
src_fps_num = int(container_fps * 1e8)
src_fps_den = int(1e8)
clip = core.std.AssumeFPS(clip, fpsnum = src_fps_num, fpsden = src_fps_den)
else:
# run with vspipe
clip = core.ffms2.Source(source=in_filename)
dst_fps=float(dst_fps)
# resolution in megapixels. 1080p ≈ 2MP, 720p ≈ 1MP
mpix = clip.width * clip.height / 1000000
# Skip interpolation for >1080p or 60 Hz content due to performance
if not (mpix > 2.5 or clip.fps_num/clip.fps_den > 59):
analParams = {
'overlap': 0,
'search': 3,
'truemotion': True,
#'chrome': True,
#'blksize':16,
#'searchparam':1
}
blockParams = {
'thscd1': ignore_threshold,
'thscd2': int(scene_change_percentage*255/100),
'mode': 3,
}
if mpix > 1.5:
# can't handle these on Full HD with Intel i5-2500k
# see the description of these parameters in http://avisynth.org.ru/mvtools/mvtools2.html#functions
analParams['search'] = 0
blockParams['mode'] = 0
quality = 'low'
else:
quality = 'high'
dst_fps_num = int(dst_fps * 1e4)
dst_fps_den = int(1e4)
print("Reflowing from {} fps to {} fps (quality={})".format(clip.fps_num/clip.fps_den,dst_fps_num/dst_fps_den,quality))
sup = core.mv.Super(clip, pel=2)
bvec = core.mv.Analyse(sup, isb=True, **analParams)
fvec = core.mv.Analyse(sup, isb=False, **analParams)
clip = core.mv.BlockFPS(clip, sup, bvec, fvec,
num=dst_fps_num, den=dst_fps_den,
**blockParams)
clip.set_output()

153
.config/mpv/mpv.conf Normal file
View File

@ -0,0 +1,153 @@
#
# Example mpv configuration file
#
# Warning:
#
# The commented example options usually do _not_ set the default values. Call
# mpv with --list-options to see the default values for most options. There is
# no builtin or example mpv.conf with all the defaults.
#
#
# Configuration files are read system-wide from /usr/local/etc/mpv.conf
# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
# system-wide settings, all of which are overridden by the command line.
#
# Configuration file settings and the command line options use the same
# underlying mechanisms. Most options can be put into the configuration file
# by dropping the preceding '--'. See the man page for a complete list of
# omeone explain to me how est of at least 10 milliptions.
#
# Lines starting with '#' are comments and are ignored.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
#
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.
input-ipc-server=/tmp/mpvsocket
##################
# video settings #
##################
# Start in fullscreen mode by default.
#fs=yes
# force starting with centered window
geometry=50%:50%
# don't allow a new window to have a size larger than 90% of the screen size
autofit-larger=90%x90%
# Do not close the window on exit.
keep-open=no
# Do not wait with showing the video window until it has loaded. (This will
# resize the window once video is loaded. Also always shows a window with
# audio.)
force-window=immediate
# Disable the On Screen Controller (OSC).
osc=yes
# Keep the player window on top of all other windows.
#ontop=yes
# Specify high quality video rendering preset (for OpenGL VO only)
# Can cause performance problems with some drivers and GPUs.
# profile=opengl-hq
# scale=ewa_lanczossharp
# cscale=ewa_lanczossharp
# video-sync=display-resample
# interpolation
# tscale=oversample
# Force video to lock on the display's refresh rate, and change video and audio
# speed to some degree to ensure synchronous playback - can cause problems
# with some drivers and desktop environments.
video-sync=display-resample
# Enable hardware decoding if available. Often, this does not work with all
# video outputs, but should work well with default settings on most systems.
# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
# may or may not help.
hwdec=auto-copy
##################
# audio settings #
##################
# Specify default audio device. You can list devices with: --audio-device=help
# The option takes the device string (the stuff between the '...').
#audio-device=alsa/default
# Do not filter audio to keep pitch when changing playback speed.
#audio-pitch-correction=no
# Output 5.1 audio natively, and upmix/downmix audio with a different format.
#audio-channels=5.1
# Disable any automatic remix, _if_ the audio output accepts the audio format.
# of the currently played file. See caveats mentioned in the manpage.
# (The default is "auto-safe", see manpage.)
#audio-channels=auto
##################
# other settings #
##################
# Pretend to be a web browser. Might fix playback with some streaming sites,
# but also will break with shoutcast streams.
#user-agent="Mozilla/5.0"
# cache settings
#
# Use 150MB input cache by default. The cache is enabled for network streams only.
#cache-default=153600
#
# Use 150MB input cache for everything, even local files.
#cache=153600
#
# Disable the behavior that the player will pause if the cache goes below a
# certain fill size.
#cache-pause=no
#
# Read ahead about 5 seconds of audio and video packets.
#demuxer-readahead-secs=5.0
#
# Raise readahead from demuxer-readahead-secs to this value if a cache is active.
#cache-secs=50.0
# Display English subtitles if available.
slang=en,fr
# Play English audio if available, fall back to French otherwise.
alang=en,fr
# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
# If the file seems to be valid UTF-8, prefer UTF-8.
# (You can add '+' in front of the codepage to force it.)
sub-codepage=UTF-8
# You can also include other configuration files.
#include=/path/to/the/file/you/want/to/include
############
# Profiles #
############
# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.
# The following profile can be enabled on the command line with: --profile=eye-cancer
[eye-cancer]
sharpen=5
[qualitatif]
profile=opengl-hq
scale=ewa_lanczossharp
cscale=ewa_lanczossharp
video-sync=display-resample
interpolation
tscale=oversamplevf=format=yuv420p,vapoursynth=~~/motioninterpolation.vpy:4:4

711
.config/neofetch/config.conf Normal file
View File

@ -0,0 +1,711 @@
# Neofetch config file
# https://github.com/dylanaraps/neofetch
# See this wiki page for more info:
# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
print_info() {
info line_break
info title
info line_break
info cols
info line_break
info "OS" distro
info "Kernel" kernel
info "Uptime" uptime
info "Packages" packages
info "Shell" shell
info "DE" de
info "WM" wm
info "Terminal" term
info "Terminal Font" term_font
info "CPU" cpu
info "GPU" gpu
info "Memory" memory
info line_break
info "Song" song
}
# Kernel
# Shorten the output of the kernel function.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --kernel_shorthand
# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
#
# Example:
# on: '4.8.9-1-ARCH'
# off: 'Linux 4.8.9-1-ARCH'
kernel_shorthand="on"
# Distro
# Shorten the output of the distro function
#
# Default: 'off'
# Values: 'on', 'off', 'tiny'
# Flag: --distro_shorthand
# Supports: Everything except Windows and Haiku
distro_shorthand="on"
# Show/Hide OS Architecture.
# Show 'x86_64', 'x86' and etc in 'Distro:' output.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --os_arch
#
# Example:
# on: 'Arch Linux x86_64'
# off: 'Arch Linux'
os_arch="off"
# Uptime
# Shorten the output of the uptime function
#
# Default: 'on'
# Values: 'on', 'off', 'tiny'
# Flag: --uptime_shorthand
#
# Example:
# on: '2 days, 10 hours, 3 mins'
# off: '2 days, 10 hours, 3 minutes'
# tiny: '2d 10h 3m'
uptime_shorthand="on"
# Shell
# Show the path to $SHELL
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --shell_path
#
# Example:
# on: '/bin/bash'
# off: 'bash'
shell_path="off"
# Show $SHELL version
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --shell_version
#
# Example:
# on: 'bash 4.4.5'
# off: 'bash'
shell_version="off"
# CPU
# CPU speed type
#
# Default: 'bios_limit'
# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
# Flag: --speed_type
# Supports: Linux with 'cpufreq'
# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
speed_type="bios_limit"
# CPU speed shorthand
#
# Default: 'off'
# Values: 'on', 'off'.
# Flag: --speed_shorthand.
# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
#
# Example:
# on: 'i7-6500U (4) @ 3.1GHz'
# off: 'i7-6500U (4) @ 3.100GHz'
speed_shorthand="on"
# Enable/Disable CPU brand in output.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --cpu_brand
#
# Example:
# on: 'Intel i7-6500U'
# off: 'i7-6500U (4)'
cpu_brand="off"
# CPU Speed
# Hide/Show CPU speed.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --cpu_speed
#
# Example:
# on: 'Intel i7-6500U (4) @ 3.1GHz'
# off: 'Intel i7-6500U (4)'
cpu_speed="off"
# CPU Cores
# Display CPU cores in output
#
# Default: 'logical'
# Values: 'logical', 'physical', 'off'
# Flag: --cpu_cores
# Support: 'physical' doesn't work on BSD.
#
# Example:
# logical: 'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
# off: 'Intel i7-6500U @ 3.1GHz'
cpu_cores="off"
# CPU Temperature
# Hide/Show CPU temperature.
# Note the temperature is added to the regular CPU function.
#
# Default: 'off'
# Values: 'C', 'F', 'off'
# Flag: --cpu_temp
# Supports: Linux, BSD
# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
# coretemp kernel module. This only supports newer Intel processors.
#
# Example:
# C: 'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
# F: 'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
# off: 'Intel i7-6500U (4) @ 3.1GHz'
cpu_temp="off"
# GPU
# Enable/Disable GPU Brand
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --gpu_brand
#
# Example:
# on: 'AMD HD 7950'
# off: 'HD 7950'
gpu_brand="off"
# Which GPU to display
#
# Default: 'all'
# Values: 'all', 'dedicated', 'integrated'
# Flag: --gpu_type
# Supports: Linux
#
# Example:
# all:
# GPU1: AMD HD 7950
# GPU2: Intel Integrated Graphics
#
# dedicated:
# GPU1: AMD HD 7950
#
# integrated:
# GPU1: Intel Integrated Graphics
gpu_type="all"
# Resolution
# Display refresh rate next to each monitor
# Default: 'off'
# Values: 'on', 'off'
# Flag: --refresh_rate
# Supports: Doesn't work on Windows.
#
# Example:
# on: '1920x1080 @ 60Hz'
# off: '1920x1080'
refresh_rate="off"
# Gtk Theme / Icons / Font
# Shorten output of GTK Theme / Icons / Font
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --gtk_shorthand
#
# Example:
# on: 'Numix, Adwaita'
# off: 'Numix [GTK2], Adwaita [GTK3]'
gtk_shorthand="on"
# Enable/Disable gtk2 Theme / Icons / Font
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --gtk2
#
# Example:
# on: 'Numix [GTK2], Adwaita [GTK3]'
# off: 'Adwaita [GTK3]'
gtk2="off"
# Enable/Disable gtk3 Theme / Icons / Font
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --gtk3
#
# Example:
# on: 'Numix [GTK2], Adwaita [GTK3]'
# off: 'Numix [GTK2]'
gtk3="off"
# IP Address
# Website to ping for the public IP
#
# Default: 'http://ident.me'
# Values: 'url'
# Flag: --ip_host
public_ip_host="http://ident.me"
# Disk
# Which disks to display.
# The values can be any /dev/sdXX, mount point or directory.
# NOTE: By default we only show the disk info for '/'.
#
# Default: '/'
# Values: '/', '/dev/sdXX', '/path/to/drive'.
# Flag: --disk_show
#
# Example:
# disk_show=('/' '/dev/sdb1'):
# 'Disk (/): 74G / 118G (66%)'
# 'Disk (/mnt/Videos): 823G / 893G (93%)'
#
# disk_show=('/'):
# 'Disk (/): 74G / 118G (66%)'
#
disk_show=('/')
# Disk subtitle.
# What to append to the Disk subtitle.
#
# Default: 'mount'
# Values: 'mount', 'name', 'dir'
# Flag: --disk_subtitle
#
# Example:
# name: 'Disk (/dev/sda1): 74G / 118G (66%)'
# 'Disk (/dev/sdb2): 74G / 118G (66%)'
#
# mount: 'Disk (/): 74G / 118G (66%)'
# 'Disk (/mnt/Local Disk): 74G / 118G (66%)'
# 'Disk (/mnt/Videos): 74G / 118G (66%)'
#
# dir: 'Disk (/): 74G / 118G (66%)'
# 'Disk (Local Disk): 74G / 118G (66%)'
# 'Disk (Videos): 74G / 118G (66%)'
disk_subtitle="mount"
# Song
# Print the Artist and Title on separate lines
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --song_shorthand
#
# Example:
# on: 'Artist: The Fratellis'
# 'Song: Chelsea Dagger'
#
# off: 'Song: The Fratellis - Chelsea Dagger'
song_shorthand="on"
# Install Date
# Whether to show the time in the output
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --install_time
#
# Example:
# on: 'Thu 14 Apr 2016 11:50 PM'
# off: 'Thu 14 Apr 2016'
install_time="off"
# Set time format in the output
#
# Default: '24h'
# Values: '12h', '24h'
# Flag: --install_time_format
#
# Example:
# 12h: 'Thu 14 Apr 2016 11:50 PM'
# 24h: 'Thu 14 Apr 2016 23:50'
install_time_format="24h"
# Text Colors
# Text Colors
#
# Default: 'distro'
# Values: 'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag: --colors
#
# Each number represents a different part of the text in
# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
#
# Example:
# colors=(distro) - Text is colored based on Distro colors.
# colors=(4 6 1 8 8 6) - Text is colored in the order above.
colors=(distro)
# Text Options
# Toggle bold text
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --bold
bold="on"
# Enable/Disable Underline
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --underline
underline_enabled="on"
# Underline character
#
# Default: '-'
# Values: 'string'
# Flag: --underline_char
underline_char="-"
# Color Blocks
# Color block range
# The range of colors to print.
#
# Default: '0', '7'
# Values: 'num'
# Flag: --block_range
#
# Example:
#
# Display colors 0-7 in the blocks. (8 colors)
# neofetch --block_range 0 7
#
# Display colors 0-15 in the blocks. (16 colors)
# neofetch --block_range 0 15
block_range=(0 7)
# Toggle color blocks
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --color_blocks
color_blocks="on"
# Color block width in spaces
#
# Default: '3'
# Values: 'num'
# Flag: --block_width
block_width=3
# Color block height in lines
#
# Default: '1'
# Values: 'num'
# Flag: --block_height
block_height=1
# Progress Bars
# Bar characters
#
# Default: '-', '='
# Values: 'string', 'string'
# Flag: --bar_char
#
# Example:
# neofetch --bar_char 'elapsed' 'total'
# neofetch --bar_char '-' '='
bar_char_elapsed="="
bar_char_total="-"
# Toggle Bar border
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --bar_border
bar_border="on"
# Progress bar length in spaces
# Number of chars long to make the progress bars.
#
# Default: '15'
# Values: 'num'
# Flag: --bar_length
bar_length=15
# Progress bar colors
# When set to distro, uses your distro's logo colors.
#
# Default: 'distro', 'distro'
# Values: 'distro', 'num'
# Flag: --bar_colors
#
# Example:
# neofetch --bar_colors 3 4
# neofetch --bar_colors distro 5
bar_color_elapsed="distro"
bar_color_total="distro"
# Info display
# Display a bar with the info.
#
# Default: 'off'
# Values: 'bar', 'infobar', 'barinfo', 'off'
# Flags: --cpu_display
# --memory_display
# --battery_display
# --disk_display
#
# Example:
# bar: '[---=======]'
# infobar: 'info [---=======]'
# barinfo: '[---=======] info'
# off: 'info'
cpu_display="off"
memory_display="off"
battery_display="off"
disk_display="off"
# Backend Settings
# Image backend.
#
# Default: 'ascii'
# Values: 'ascii', 'caca', 'catimg', 'jp2a', 'iterm2', 'off', 'tycat', 'w3m'
# Flag: --backend
image_backend="ascii"
# Image Source
#
# Which image or ascii file to display.
#
# Default: 'auto'
# Values: 'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
# Flag: --source
#
# NOTE: 'auto' will pick the best image source for whatever image backend is used.
# In ascii mode, distro ascii art will be used and in an image mode, your
# wallpaper will be used.
image_source="auto"
# Ascii Options
# Ascii distro
# Which distro's ascii art to display.
#
# Default: 'auto'
# Values: 'auto', 'distro_name'
# Flag: --ascii_distro
#
# NOTE: Arch and Ubuntu have 'old' logo variants.
# Change this to 'arch_old' or 'ubuntu_old' to use the old logos.
# NOTE: Ubuntu has flavor variants.
# Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu-GNOME' or 'Ubuntu-Budgie' to use the flavors.
# NOTE: Arch, Crux and Gentoo have a smaller logo variant.
# Change this to 'arch_small', 'crux_small' or 'gentoo_small' to use the small logos.
ascii_distro="auto"
# Ascii Colors
#
# Default: 'distro'
# Values: 'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag: --ascii_colors
#
# Example:
# ascii_colors=(distro) - Ascii is colored based on Distro colors.
# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
ascii_colors=(distro)
# Bold ascii logo
# Whether or not to bold the ascii logo.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --ascii_bold
ascii_bold="on"
# Image Options
# Image loop
# Setting this to on will make neofetch redraw the image constantly until
# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --loop
image_loop="off"
# Thumbnail directory
#
# Default: '~/.cache/thumbnails/neofetch'
# Values: 'dir'
thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
# Crop mode
#
# Default: 'normal'
# Values: 'normal', 'fit', 'fill'
# Flag: --crop_mode
#
# See this wiki page to learn about the fit and fill options.
# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
crop_mode="fit"
# Crop offset
# Note: Only affects 'normal' crop mode.
#
# Default: 'center'
# Values: 'northwest', 'north', 'northeast', 'west', 'center'
# 'east', 'southwest', 'south', 'southeast'
# Flag: --crop_offset
crop_offset="center"
# Image size
# The image is half the terminal width by default.
#
# Default: 'auto'
# Values: 'auto', '00px', '00%', 'none'
# Flags: --image_size
# --size
image_size="auto"
# Ggap between image and text
#
# Default: '3'
# Values: 'num', '-num'
# Flag: --gap
gap=3
# Image offsets
# Only works with the w3m backend.
#
# Default: '0'
# Values: 'px'
# Flags: --xoffset
# --yoffset
yoffset=0
xoffset=0
# Image background color
# Only works with the w3m backend.
#
# Default: ''
# Values: 'color', 'blue'
# Flag: --bg_color
background_color=
# Scrot Options
# Whether or not to always take a screenshot
# You can manually take a screenshot with "--scrot" or "-s"
#
# Default: 'off'
# Values: 'on', 'off'
# Flags: --scrot
# -s
scrot="off"
# Screenshot Program
# Neofetch will automatically use whatever screenshot tool
# is installed on your system.
#
# If 'neofetch -v' says that it couldn't find a screenshot
# tool or you're using a custom tool then you can change
# the option below to a custom command.
#
# Default: 'auto'
# Values: 'auto' 'cmd -flags'
# Flag: --scrot_cmd
scrot_cmd="auto"
# Screenshot Filename
# What to name the screenshots
#
# Default: 'neofetch-$(date +%F-%I-%M-%S-${RANDOM}).png'
# Values: 'string'
# Flag: --scrot_name
scrot_name="neofetch-$(date +%F-%I-%M-%S-${RANDOM}).png"
# Image upload host
# Where to upload the image.
#
# Default: 'teknik'
# Values: 'imgur', 'teknik'
# Flag: --image_host
#
# NOTE: If you'd like another image host to be added to Neofetch.
# Open an issue on github.
image_host="teknik"
# Misc Options
# Config version.
#
# NOTE: Don't change this value, neofetch reads this to determine
# how to handle backwards compatibility.
config_version="3.2.1-git"

534
.config/polybar/config Normal file
View File

@ -0,0 +1,534 @@
;=====================================================
;
; To learn more about how to configure Polybar
; go to https://github.com/jaagr/polybar
;
; The README contains alot of information
;
;=====================================================
[colors]
background = ${xrdb:color1:#50000000}
background-alt = ${xrdb:color2:#444}
foreground = ${xrdb:color7:#dfdfdf}
foreground-alt = ${xrdb:color6:#555}
primary = #ffb52a
secondary = #e60053
alert = #bd2c40
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[bar/bottom]
monitor= ${env:MONITOR}
bottom = true
width = 100%
height = 22
radius = 0.0
fixed-center = true
background = ${colors.background}
foreground = ${colors.foreground}
line-size = 3
line-color = #f00
border-size = 0
border-color = #00000000
padding-left = 2
padding-right = 4
locale=ja_JP.UTF-8
module-margin-left = 1
module-margin-right = 2
font-0 = fixed:pixelsize=8
font-1 = unifont:fontformat=truetype:size=6:antialias=false
font-2 = "Siji:pixelsize=8"
font-3 = "IPAMincho:style=regular:pixelsize=8"
modules-left = powermenu mpd
modules-center =
modules-right = filesystem wlan eth volume backlight-acpi cpu memory temperature custom-battery
tray-position =
tray-padding = 0
tray-detached = false
tray-maxsize = 15
tray-transparent = false
tray-background = ${colors.background}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[bar/top]
monitor= ${env:MONITOR}
bottom = false
width = 100%
height = 22
radius = 10.0
fixed-center = true
background = ${colors.background}
foreground = ${colors.foreground}
line-size = 3
line-color = #f00
border-size = 5
border-color = #00000000
padding-left = 2
padding-right = 4
locale=ja_JP.UTF-8
module-margin-left = 1
module-margin-right = 2
font-0 = fixed:pixelsize=8
font-1 = unifont:fontformat=truetype:size=6:antialias=false
font-2 = "Siji:pixelsize=8"
font-3 = "IPAMincho:style=regular:pixelsize=8"
modules-left = i3
modules-center = xwindow
modules-right = date
tray-position =
tray-padding = 0
tray-detached = false
tray-maxsize = 15
tray-transparent = false
tray-background = ${colors.background}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/custom-battery]
type = custom/script
exec = polybar-ab -polybar -thr 10
tail = true
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/xwindow]
type = internal/xwindow
format-prefix-foreground = ${colors.foreground-alt}
format-prefix-underline = ${colors.secondary}
format-underline = ${colors.secondary}
format-padding = 1
label = %title%
label-maxlen = 70
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock
format = <label-layout> <label-indicator>
format-prefix = " "
format-prefix-foreground = ${colors.foreground}
format-prefix-underline = ${colors.secondary}
format-underline = ${colors.secondary}
format-padding = 1
label-layout = %layout% %number%
label-layout-padding = 1
label-layout-underline = ${colors.secondary}
label-indicator = %name%
label-indicator-padding = 2
label-indicator-margin = 1
label-indicator-background = ${colors.secondary}
label-indicator-underline = ${colors.secondary}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/filesystem]
type = internal/fs
interval = 20
mount-0 = /
mount-1 = /home
format-mounted = <label-mounted>
label-mounted-underline = ${colors.secondary}
format-unmounted = <label-unmounted>
label-mounted =  %mountpoint%: %used%/%total% (%percentage_used%%)
label-unmounted = %mountpoint% not mounted
label-unmounted-foreground = ${colors.foreground-alt}
label-mounted-foreground = ${colors.foreground}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/i3]
type = internal/i3
index-sort = true
enable-scroll = false
wrapping-scroll = false
strip-wsnumbers = false
pin-workspaces = true
fuzzy-match = true
label-focused = %icon%
label-focused-background = ${colors.background-alt}
label-focused-underline = ${xrdb:color8:#ffff00}
label-focused-padding = 2
label-unfocused = %icon%
label-unfocused-padding = 2
label-visible = %icon%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}
label-urgent = %icon%
label-urgent-background = ${xrdb:color0:#bd2c40}
label-urgent-padding = 2
ws-icon-0 = 1;一
ws-icon-1 = 2;二
ws-icon-2 = 3;三
ws-icon-3 = 4;四
ws-icon-4 = 5;五
ws-icon-5 = 6;六
ws-icon-6 = 7;七
ws-icon-7 = 8;八
ws-icon-8 = 9;九
ws-icon-9 = 0;十
ws-icon-default = %index%
format = <label-state> <label-mode>
label-mode = %mode%
label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.background-alt}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/mpd]
type = internal/mpd
label-song =  %title% - %artist%
label-song-maxlen = 50
label-song-ellipsis = true
label-offline =  mpd is offline
format-online = <icon-prev> <toggle> <icon-next> <label-song>
format-offline = <label-offline>
icon-prev = 
icon-stop = 
icon-play = 
icon-pause = 
icon-next = 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/backlight-acpi]
inherit = module/xbacklight
type = internal/backlight
card = intel_backlight
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/cpu]
type = internal/cpu
interval = 2
format = <label> <ramp-coreload>
format-prefix = " "
format-underline = #f90000
label = %percentage%%
ramp-coreload-0 = ▁
ramp-coreload-1 = ▂
ramp-coreload-2 = ▃
ramp-coreload-3 = ▄
ramp-coreload-4 = ▅
ramp-coreload-5 = ▆
ramp-coreload-6 = ▇
ramp-coreload-7 = █
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/memory]
type = internal/memory
interval = 2
format = <label>
format-prefix = " "
format-underline = #4bffdc
label = %gb_used%
ramp-used-0 = ▁
ramp-used-1 = ▂
ramp-used-2 = ▃
ramp-used-3 = ▄
ramp-used-4 = ▅
ramp-used-5 = ▆
ramp-used-6 = ▇
ramp-used-7 = █
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/wlan]
type = internal/network
interface = wlp3s0
interval = 3.0
format-connected = <ramp-signal> <label-connected>
format-connected-underline = #9f78e1
label-connected = %essid%
format-disconnected =
format-disconnected-underline = ${self.format-connected-underline}
label-disconnected = wifi-none
ramp-signal-0 = 
ramp-signal-1 = 
ramp-signal-2 = 
ramp-signal-3 = 
ramp-signal-4 = 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/eth]
type = internal/network
interface = enp0s25
interval = 3.0
format-connected-underline = #55aa55
format-connected-prefix = " "
label-connected = %local_ip%
format-disconnected =
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/date]
type = internal/date
interval = 1
date = %Y-%m-%d
date-alt = %A %d, %B
time = %H:%M:%S
time-alt = %H:%M:%S
format-prefix = 
format-underline = #0a6cf5
label = %date% %time%
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/volume]
type = internal/alsa
format-volume = <label-volume>
format-volume-prefix = " "
format-volume-underline = #55aa55
label-volume = %percentage%%
format-muted-prefix = " "
label-muted = muted
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/xbacklight]
type = internal/xbacklight
format = <label>
label = %percentage%%
format-prefix = " "
format-underline = #9f78e1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/battery]
type = internal/battery
battery = BAT0
adapter = ACAD
full-at = 95
format-charging = <animation-charging> <label-charging>
format-charging-underline = #ffb52a
format-discharging = <ramp-capacity> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}
format-full-prefix = " "
format-full-underline = ${self.format-charging-underline}
; 0-10
ramp-capacity-0 = 
ramp-capacity-0-foreground = #f44336
; 11-20
ramp-capacity-1 = 
ramp-capacity-1-foreground = #ff9800
; 21-30
ramp-capacity-2 = 
ramp-capacity-2-foreground = #ffc107
; 31-40
ramp-capacity-3 = 
; 41-50
ramp-capacity-4 = 
; 51-60
ramp-capacity-5 = 
; 61-70
ramp-capacity-6 = 
; 71-80
ramp-capacity-7 = 
; 81-90
ramp-capacity-8 = 
; 91-100
ramp-capacity-9 = 
animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-5 = 
animation-charging-6 = 
animation-charging-7 = 
animation-charging-8 = 
animation-charging-9 = 
animation-charging-framerate = 100
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/temperature]
type = internal/temperature
thermal-zone = 0
warn-temperature = 60
format = <ramp> <label>
format-underline = #f50a4d
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}
label = %temperature-c%
label-warn = %temperature-c%
label-warn-foreground = ${colors.secondary}
ramp-0 = 
ramp-1 = 
ramp-2 = 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/powermenu]
type = custom/menu
format-spacing = 1
label-open = 
label-open-foreground = ${colors.secondary}
label-close =  cancel
label-close-foreground = ${colors.secondary}
label-separator = |
label-separator-foreground = ${colors.foreground-alt}
menu-0-0 = reboot
menu-0-0-exec = menu-open-1
menu-0-1 = poweroff
menu-0-1-exec = menu-open-2
menu-0-2 = suspend
menu-0-2-exec = menu-open-3
menu-1-0 = cancel
menu-1-0-exec = menu-open-0
menu-1-1 = reboot
menu-1-1-exec = reboot
menu-2-0 = poweroff
menu-2-0-exec = poweroff
menu-2-1 = cancel
menu-2-1-exec = menu-open-0
menu-3-0 = suspend
menu-3-0-exec = "systemctl suspend"
menu-3-1 = cancel
menu-3-1-exec = menu-open-0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/pkg]
type = custom/script
interval = 1200
format = <label>
format-underline = #dc322f
label = "%output:0:30%"
exec = .config/polybar/pkg.sh
exec-if = "ping -q -w 3 -c 1 176.34.135.167 > /dev/null"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/mpv]
type = custom/script
exec = sh ~/.config/polybar/mpv.sh
exec-if = pgrep -x mpv
interval = 1
format = <label>
label = %output%
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[module/bluetooth]
type = custom/script
interval = 5
exec = ~/.config/polybar/bluetooth.sh
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[settings]
screenchange-reload = true
; compositing-background = xor
; compositing-background = over
; compositing-foreground = xor
; compositing-foreground = source
; compositing-border = over
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[global/wm]
margin-top = 5
margin-bottom = 5
; vim:ft=dosini

19
.config/polybar/launch.sh Executable file
View File

@ -0,0 +1,19 @@
#!/usr/bin/env sh
killall -q polybar
# Wait until the processes have been shut down
while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
# Launch bar on all screens
if type "xrandr"; then
for m in $(xrandr --query | grep " connected" | cut -d" " -f1); do
MONITOR=$m polybar --reload top &
MONITOR=$m polybar --reload bottom &
done
else
polybar --reload top &
polybar --reload bottom &
fi
echo "Bars launched..."

62
.config/ranger/commands.py Normal file
View File

@ -0,0 +1,62 @@
# This is a sample commands.py. You can add your own commands here.
#
# Please refer to commands_full.py for all the default commands and a complete
# documentation. Do NOT add them all here, or you may end up with defunct
# commands when upgrading ranger.
# A simple command for demonstration purposes follows.
# -----------------------------------------------------------------------------
from __future__ import (absolute_import, division, print_function)
# You can import any python module as needed.
import os
# You always need to import ranger.api.commands here to get the Command class:
from ranger.api.commands import Command
# Any class that is a subclass of "Command" will be integrated into ranger as a
# command. Try typing ":my_edit<ENTER>" in ranger!
class my_edit(Command):
# The so-called doc-string of the class will be visible in the built-in
# help that is accessible by typing "?c" inside ranger.
""":my_edit <filename>
A sample command for demonstration purposes that opens a file in an editor.
"""
# The execute method is called when you run this command in ranger.
def execute(self):
# self.arg(1) is the first (space-separated) argument to the function.
# This way you can write ":my_edit somefilename<ENTER>".
if self.arg(1):
# self.rest(1) contains self.arg(1) and everything that follows
target_filename = self.rest(1)
else:
# self.fm is a ranger.core.filemanager.FileManager object and gives
# you access to internals of ranger.
# self.fm.thisfile is a ranger.container.file.File object and is a
# reference to the currently selected file.
target_filename = self.fm.thisfile.path
# This is a generic function to print text in ranger.
self.fm.notify("Let's edit the file " + target_filename + "!")
# Using bad=True in fm.notify allows you to print error messages:
if not os.path.exists(target_filename):
self.fm.notify("The given file does not exist!", bad=True)
return
# This executes a function from ranger.core.acitons, a module with a
# variety of subroutines that can help you construct commands.
# Check out the source, or run "pydoc ranger.core.actions" for a list.
self.fm.edit_file(target_filename)
# The tab method is called when you press tab, and should return a list of
# suggestions that the user will tab through.
# tabnum is 1 for <TAB> and -1 for <S-TAB> by default
def tab(self, tabnum):
# This is a generic tab-completion function that iterates through the
# content of the current directory.
return self._tab_directory_content()

1769
.config/ranger/commands_full.py Normal file
View File

File diff suppressed because it is too large Load Diff

660
.config/ranger/rc.conf Normal file
View File

@ -0,0 +1,660 @@
# ===================================================================
# This file contains the default startup commands for ranger.
# To change them, it is recommended to create the file
# ~/.config/ranger/rc.conf and add your custom commands there.
#
# If you copy this whole file there, you may want to set the environment
# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
#
# The purpose of this file is mainly to define keybindings and settings.
# For running more complex python code, please create a plugin in "plugins/" or
# a command in "commands.py".
#
# Each line is a command that will be run before the user interface
# is initialized. As a result, you can not use commands which rely
# on the UI such as :delete or :mark.
# ===================================================================
# ===================================================================
# == Options
# ===================================================================
# Which viewmode should be used? Possible values are:
# miller: Use miller columns which show multiple levels of the hierarchy
# multipane: Midnight-commander like multipane view showing all tabs next
# to each other
set viewmode miller
#set viewmode multipane
# How many columns are there, and what are their relative widths?
set column_ratios 1,3,4
# Which files should be hidden? (regular expression)
set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
# Show hidden files? You can toggle this by typing 'zh'
set show_hidden true
# Ask for a confirmation when running the "delete" command?
# Valid values are "always", "never", "multiple" (default)
# With "multiple", ranger will ask only if you delete multiple files at once.
set confirm_on_delete multiple
# Use non-default path for file preview script?
# ranger ships with scope.sh, a script that calls external programs (see
# README.md for dependencies) to preview images, archives, etc.
set preview_script ~/.config/ranger/scope.sh
# Use the external preview script or display simple plain text or image previews?
set use_preview_script true
# Automatically count files in the directory, even before entering them?
set automatically_count_files true
# Open all images in this directory when running certain image viewers
# like feh or sxiv? You can still open selected files by marking them.
set open_all_images true
# Be aware of version control systems and display information.
set vcs_aware false
# State of the four backends git, hg, bzr, svn. The possible states are
# disabled, local (only show local info), enabled (show local and remote
# information).
set vcs_backend_git enabled
set vcs_backend_hg disabled
set vcs_backend_bzr disabled
set vcs_backend_svn disabled
# Use one of the supported image preview protocols
set preview_images true
# Set the preview image method. Supported methods:
#
# * w3m (default):
# Preview images in full color with the external command "w3mimgpreview"?
# This requires the console web browser "w3m" and a supported terminal.
# It has been successfully tested with "xterm" and "urxvt" without tmux.
#
# * iterm2:
# Preview images in full color using iTerm2 image previews
# (http://iterm2.com/images.html). This requires using iTerm2 compiled
# with image preview support.
#
# This feature relies on the dimensions of the terminal's font. By default, a
# width of 8 and height of 11 are used. To use other values, set the options
# iterm2_font_width and iterm2_font_height to the desired values.
#
# * urxvt:
# Preview images in full color using urxvt image backgrounds. This
# requires using urxvt compiled with pixbuf support.
#
# * urxvt-full:
# The same as urxvt but utilizing not only the preview pane but the
# whole terminal window.
set preview_images_method w3m
# Default iTerm2 font size (see: preview_images_method: iterm2)
set iterm2_font_width 8
set iterm2_font_height 11
# Use a unicode "..." character to mark cut-off filenames?
set unicode_ellipsis true
# Show dotfiles in the bookmark preview box?
set show_hidden_bookmarks true
# Which colorscheme to use? These colorschemes are available by default:
# default, jungle, snow, solarized
set colorscheme default
# Preview files on the rightmost column?
# And collapse (shrink) the last column if there is nothing to preview?
set preview_files true
set preview_directories true
set collapse_preview true
# Save the console history on exit?
set save_console_history true
# Draw the status bar on top of the browser window (default: bottom)
set status_bar_on_top false
# Draw a progress bar in the status bar which displays the average state of all
# currently running tasks which support progress bars?
set draw_progress_bar_in_status_bar true
# Draw borders around columns?
set draw_borders false
# Display the directory name in tabs?
set dirname_in_tabs false
# Enable the mouse support?
set mouse_enabled true
# Display the file size in the main column or status bar?
set display_size_in_main_column true
set display_size_in_status_bar true
# Display files tags in all columns or only in main column?
set display_tags_in_all_columns true
# Set a title for the window?
set update_title false
# Set the title to "ranger" in the tmux program?
set update_tmux_title false
# Shorten the title if it gets long? The number defines how many
# directories are displayed at once, 0 turns off this feature.
set shorten_title 3
# Show hostname in titlebar?
set hostname_in_titlebar true
# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
set tilde_in_titlebar false
# How many directory-changes or console-commands should be kept in history?
set max_history_size 20
set max_console_history_size 50
# Try to keep so much space between the top/bottom border when scrolling:
set scroll_offset 8
# Flush the input after each key hit? (Noticeable when ranger lags)
set flushinput true
# Padding on the right when there's no preview?
# This allows you to click into the space to run the file.
set padding_right true
# Save bookmarks (used with mX and `X) instantly?
# This helps to synchronize bookmarks between multiple ranger
# instances but leads to *slight* performance loss.
# When false, bookmarks are saved when ranger is exited.
set autosave_bookmarks true
# Save the "`" bookmark to disk. This can be used to switch to the last
# directory by typing "``".
set save_backtick_bookmark true
# You can display the "real" cumulative size of directories by using the
# command :get_cumulative_size or typing "dc". The size is expensive to
# calculate and will not be updated automatically. You can choose
# to update it automatically though by turning on this option:
set autoupdate_cumulative_size false
# Turning this on makes sense for screen readers:
set show_cursor false
# One of: size, natural, basename, atime, ctime, mtime, type, random
set sort natural
# Additional sorting options
set sort_reverse false
set sort_case_insensitive false
set sort_directories_first true
set sort_unicode true
# Enable this if key combinations with the Alt Key don't work for you.
# (Especially on xterm)
set xterm_alt_key false
# Whether to include bookmarks in cd command
set cd_bookmarks true
# Changes case sensitivity for the cd command tab completion
set cd_tab_case sensitive
# Use fuzzy tab completion with the "cd" command. For example,
# ":cd /u/lo/b<tab>" expands to ":cd /usr/local/bin".
set cd_tab_fuzzy false
# Avoid previewing files larger than this size, in bytes. Use a value of 0 to
# disable this feature.
set preview_max_size 0
# The key hint lists up to this size have their sublists expanded.
# Otherwise the submaps are replaced with "...".
set hint_collapse_threshold 10
# Add the highlighted file to the path in the titlebar
set show_selection_in_titlebar true
# The delay that ranger idly waits for user input, in milliseconds, with a
# resolution of 100ms. Lower delay reduces lag between directory updates but
# increases CPU load.
set idle_delay 2000
# When the metadata manager module looks for metadata, should it only look for
# a ".metadata.json" file in the current directory, or do a deep search and
# check all directories above the current one as well?
set metadata_deep_search false
# Clear all existing filters when leaving a directory
set clear_filters_on_dir_change false
# Disable displaying line numbers in main column
set line_numbers true
# Start line numbers from 1 instead of 0
set one_indexed true
# Save tabs on exit
set save_tabs_on_exit false
# Enable scroll wrapping - moving down while on the last item will wrap around to
# the top and vice versa.
set wrap_scroll false
# Set the global_inode_type_filter to nothing. Possible options: d, f and l for
# directories, files and symlinks respectively.
set global_inode_type_filter
# ===================================================================
# == Local Options
# ===================================================================
# You can set local options that only affect a single directory.
# Examples:
# setlocal path=~/downloads sort mtime
# ===================================================================
# == Command Aliases in the Console
# ===================================================================
alias e edit
alias q quit
alias q! quit!
alias qa quitall
alias qa! quitall!
alias qall quitall
alias qall! quitall!
alias setl setlocal
alias filter scout -prts
alias find scout -aets
alias mark scout -mr
alias unmark scout -Mr
alias search scout -rs
alias search_inc scout -rts
alias travel scout -aefklst
# ===================================================================
# == Define keys for the browser
# ===================================================================
# Basic
map Q quitall
map q quit
copymap q ZZ ZQ
map R reload_cwd
map F set freeze_files!
map <C-r> reset
map <C-l> redraw_window
map <C-c> abort
map <esc> change_mode normal
map ~ set viewmode!
map i display_file
map ? help
map W display_log
map w taskview_open
map S shell $SHELL
map : console
map ; console
map ! console shell%space
map @ console -p6 shell %%s
map # console shell -p%space
map s console shell%space
map r chain draw_possible_programs; console open_with%%space
map f console find%space
map cd console cd%space
# Change the line mode
map Mf linemode filename
map Mi linemode fileinfo
map Mm linemode mtime
map Mp linemode permissions
map Ms linemode sizemtime
map Mt linemode metatitle
# Tagging / Marking
map t tag_toggle
map ut tag_remove
map "<any> tag_toggle tag=%any
map <Space> mark_files toggle=True
map v mark_files all=True toggle=True
map uv mark_files all=True val=False
map V toggle_visual_mode
map uV toggle_visual_mode reverse=True
# For the nostalgics: Midnight Commander bindings
map <F1> help
map <F2> rename_append
map <F3> display_file
map <F4> edit
map <F5> copy
map <F6> cut
map <F7> console mkdir%space
map <F8> console delete
map <F10> exit
# In case you work on a keyboard with dvorak layout
map <UP> move up=1
map <DOWN> move down=1
map <LEFT> move left=1
map <RIGHT> move right=1
map <HOME> move to=0
map <END> move to=-1
map <PAGEDOWN> move down=1 pages=True
map <PAGEUP> move up=1 pages=True
map <CR> move right=1
#map <DELETE> console delete
map <INSERT> console touch%space
# VIM-like
copymap <UP> k
copymap <DOWN> j
copymap <LEFT> h
copymap <RIGHT> l
copymap <HOME> gg
copymap <END> G
copymap <PAGEDOWN> <C-F>
copymap <PAGEUP> <C-B>
map J move down=0.5 pages=True
map K move up=0.5 pages=True
copymap J <C-D>
copymap K <C-U>
# Jumping around
map H history_go -1
map L history_go 1
map ] move_parent 1
map [ move_parent -1
map } traverse
map ) jump_non
map gh cd ~
map ge cd /etc
map gu cd /usr
map gd cd /dev
map gl cd -r .
map gL cd -r %f
map go cd /opt
map gv cd /var
map gm cd /media
map gM cd /mnt
map gs cd /srv
map gp cd /tmp
map gr cd /
map gR eval fm.cd(ranger.RANGERDIR)
map g/ cd /
map g? cd /usr/share/doc/ranger
# External Programs
map E edit
map du shell -p du --max-depth=1 -h --apparent-size
map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
map yp yank path
map yd yank dir
map yn yank name
# Filesystem Operations
map = chmod
map cw console rename%space
map a rename_append
map A eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"))
map I eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"), position=7)
map pp paste
map po paste overwrite=True
map pP paste append=True
map pO paste overwrite=True append=True
map pl paste_symlink relative=False
map pL paste_symlink relative=True
map phl paste_hardlink
map pht paste_hardlinked_subtree
map dD console delete
map dd cut
map ud uncut
map da cut mode=add
map dr cut mode=remove
map dt cut mode=toggle
map yy copy
map uy uncut
map ya copy mode=add
map yr copy mode=remove
map yt copy mode=toggle
# Temporary workarounds
map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
# Searching
map / console search%space
map n search_next
map N search_next forward=False
map ct search_next order=tag
map cs search_next order=size
map ci search_next order=mimetype
map cc search_next order=ctime
map cm search_next order=mtime
map ca search_next order=atime
# Tabs
map <C-n> tab_new
map <C-w> tab_close
map <TAB> tab_move 1
map <S-TAB> tab_move -1
map <A-Right> tab_move 1
map <A-Left> tab_move -1
map gt tab_move 1
map gT tab_move -1
map gn tab_new
map gc tab_close
map uq tab_restore
map <a-1> tab_open 1
map <a-2> tab_open 2
map <a-3> tab_open 3
map <a-4> tab_open 4
map <a-5> tab_open 5
map <a-6> tab_open 6
map <a-7> tab_open 7
map <a-8> tab_open 8
map <a-9> tab_open 9
# Sorting
map or set sort_reverse!
map oz set sort=random
map os chain set sort=size; set sort_reverse=False
map ob chain set sort=basename; set sort_reverse=False
map on chain set sort=natural; set sort_reverse=False
map om chain set sort=mtime; set sort_reverse=False
map oc chain set sort=ctime; set sort_reverse=False
map oa chain set sort=atime; set sort_reverse=False
map ot chain set sort=type; set sort_reverse=False
map oe chain set sort=extension; set sort_reverse=False
map oS chain set sort=size; set sort_reverse=True
map oB chain set sort=basename; set sort_reverse=True
map oN chain set sort=natural; set sort_reverse=True
map oM chain set sort=mtime; set sort_reverse=True
map oC chain set sort=ctime; set sort_reverse=True
map oA chain set sort=atime; set sort_reverse=True
map oT chain set sort=type; set sort_reverse=True
map oE chain set sort=extension; set sort_reverse=True
map dc get_cumulative_size
# Settings
map zc set collapse_preview!
map zd set sort_directories_first!
map zh set show_hidden!
map <C-h> set show_hidden!
map zI set flushinput!
map zi set preview_images!
map zm set mouse_enabled!
map zp set preview_files!
map zP set preview_directories!
map zs set sort_case_insensitive!
map zu set autoupdate_cumulative_size!
map zv set use_preview_script!
map zf console filter%space
copymap zf zz
# Bookmarks
map `<any> enter_bookmark %any
map '<any> enter_bookmark %any
map m<any> set_bookmark %any
map um<any> unset_bookmark %any
map m<bg> draw_bookmarks
copymap m<bg> um<bg> `<bg> '<bg>
# Generate all the chmod bindings with some python help:
eval for arg in "rwxXst": cmd("map +u{0} shell -f chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +g{0} shell -f chmod g+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +o{0} shell -f chmod o+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +a{0} shell -f chmod a+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +{0} shell -f chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -u{0} shell -f chmod u-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -g{0} shell -f chmod g-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -o{0} shell -f chmod o-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -a{0} shell -f chmod a-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -{0} shell -f chmod u-{0} %s".format(arg))
# ===================================================================
# == Define keys for the console
# ===================================================================
# Note: Unmapped keys are passed directly to the console.
# Basic
cmap <tab> eval fm.ui.console.tab()
cmap <s-tab> eval fm.ui.console.tab(-1)
cmap <ESC> eval fm.ui.console.close()
cmap <CR> eval fm.ui.console.execute()
cmap <C-l> redraw_window
copycmap <ESC> <C-c>
copycmap <CR> <C-j>
# Move around
cmap <up> eval fm.ui.console.history_move(-1)
cmap <down> eval fm.ui.console.history_move(1)
cmap <left> eval fm.ui.console.move(left=1)
cmap <right> eval fm.ui.console.move(right=1)
cmap <home> eval fm.ui.console.move(right=0, absolute=True)
cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
cmap <a-left> eval fm.ui.console.move_word(left=1)
cmap <a-right> eval fm.ui.console.move_word(right=1)
# Line Editing
cmap <backspace> eval fm.ui.console.delete(-1)
cmap <delete> eval fm.ui.console.delete(0)
cmap <C-w> eval fm.ui.console.delete_word()
cmap <A-d> eval fm.ui.console.delete_word(backward=False)
cmap <C-k> eval fm.ui.console.delete_rest(1)
cmap <C-u> eval fm.ui.console.delete_rest(-1)
cmap <C-y> eval fm.ui.console.paste()
# And of course the emacs way
copycmap <up> <C-p>
copycmap <down> <C-n>
copycmap <left> <C-b>
copycmap <right> <C-f>
copycmap <home> <C-a>
copycmap <end> <C-e>
copycmap <delete> <C-d>
copycmap <backspace> <C-h>
# Note: There are multiple ways to express backspaces. <backspace> (code 263)
# and <backspace2> (code 127). To be sure, use both.
copycmap <backspace> <backspace2>
# This special expression allows typing in numerals:
cmap <allow_quantifiers> false
# ===================================================================
# == Pager Keybindings
# ===================================================================
# Movement
pmap <down> pager_move down=1
pmap <up> pager_move up=1
pmap <left> pager_move left=4
pmap <right> pager_move right=4
pmap <home> pager_move to=0
pmap <end> pager_move to=-1
pmap <pagedown> pager_move down=1.0 pages=True
pmap <pageup> pager_move up=1.0 pages=True
pmap <C-d> pager_move down=0.5 pages=True
pmap <C-u> pager_move up=0.5 pages=True
copypmap <UP> k <C-p>
copypmap <DOWN> j <C-n> <CR>
copypmap <LEFT> h
copypmap <RIGHT> l
copypmap <HOME> g
copypmap <END> G
copypmap <C-d> d
copypmap <C-u> u
copypmap <PAGEDOWN> n f <C-F> <Space>
copypmap <PAGEUP> p b <C-B>
# Basic
pmap <C-l> redraw_window
pmap <ESC> pager_close
copypmap <ESC> q Q i <F3>
pmap E edit_file
# ===================================================================
# == Taskview Keybindings
# ===================================================================
# Movement
tmap <up> taskview_move up=1
tmap <down> taskview_move down=1
tmap <home> taskview_move to=0
tmap <end> taskview_move to=-1
tmap <pagedown> taskview_move down=1.0 pages=True
tmap <pageup> taskview_move up=1.0 pages=True
tmap <C-d> taskview_move down=0.5 pages=True
tmap <C-u> taskview_move up=0.5 pages=True
copytmap <UP> k <C-p>
copytmap <DOWN> j <C-n> <CR>
copytmap <HOME> g
copytmap <END> G
copytmap <C-u> u
copytmap <PAGEDOWN> n f <C-F> <Space>
copytmap <PAGEUP> p b <C-B>
# Changing priority and deleting tasks
tmap J eval -q fm.ui.taskview.task_move(-1)
tmap K eval -q fm.ui.taskview.task_move(0)
tmap dd eval -q fm.ui.taskview.task_remove()
tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
tmap <pageup> eval -q fm.ui.taskview.task_move(0)
tmap <delete> eval -q fm.ui.taskview.task_remove()
# Basic
tmap <C-l> redraw_window
tmap <ESC> taskview_close
copytmap <ESC> q Q w <C-c>

226
.config/ranger/rifle.conf Normal file
View File

@ -0,0 +1,226 @@
# vim: ft=cfg
#
# This is the configuration file of "rifle", ranger's file executor/opener.
# Each line consists of conditions and a command. For each line the conditions
# are checked and if they are met, the respective command is run.
#
# Syntax:
# <condition1> , <condition2> , ... = command
#
# The command can contain these environment variables:
# $1-$9 | The n-th selected file
# $@ | All selected files
#
# If you use the special command "ask", rifle will ask you what program to run.
#
# Prefixing a condition with "!" will negate its result.
# These conditions are currently supported:
# match <regexp> | The regexp matches $1
# ext <regexp> | The regexp matches the extension of $1
# mime <regexp> | The regexp matches the mime type of $1
# name <regexp> | The regexp matches the basename of $1
# path <regexp> | The regexp matches the absolute path of $1
# has <program> | The program is installed (i.e. located in $PATH)
# env <variable> | The environment variable "variable" is non-empty
# file | $1 is a file
# directory | $1 is a directory
# number <n> | change the number of this command to n
# terminal | stdin, stderr and stdout are connected to a terminal
# X | $DISPLAY is not empty (i.e. Xorg runs)
#
# There are also pseudo-conditions which have a "side effect":
# flag <flags> | Change how the program is run. See below.
# label <label> | Assign a label or name to the command so it can
# | be started with :open_with <label> in ranger
# | or `rifle -p <label>` in the standalone executable.
# else | Always true.
#
# Flags are single characters which slightly transform the command:
# f | Fork the program, make it run in the background.
# | New command = setsid $command >& /dev/null &
# r | Execute the command with root permissions
# | New command = sudo $command
# t | Run the program in a new terminal. If $TERMCMD is not defined,
# | rifle will attempt to extract it from $TERM.
# | New command = $TERMCMD -e $command
# Note: The "New command" serves only as an illustration, the exact
# implementation may differ.
# Note: When using rifle in ranger, there is an additional flag "c" for
# only running the current file even if you have marked multiple files.
#-------------------------------------------
# Websites
#-------------------------------------------
# Rarely installed browsers get higher priority; It is assumed that if you
# install a rare browser, you probably use it. Firefox/konqueror/w3m on the
# other hand are often only installed as fallback browsers.
ext x?html?, has surf, X, flag f = surf -- file://"$1"
ext x?html?, has vimprobable, X, flag f = vimprobable -- "$@"
ext x?html?, has vimprobable2, X, flag f = vimprobable2 -- "$@"
ext x?html?, has qutebrowser, X, flag f = qutebrowser -- "$@"
ext x?html?, has dwb, X, flag f = dwb -- "$@"
ext x?html?, has jumanji, X, flag f = jumanji -- "$@"
ext x?html?, has luakit, X, flag f = luakit -- "$@"
ext x?html?, has uzbl, X, flag f = uzbl -- "$@"
ext x?html?, has uzbl-tabbed, X, flag f = uzbl-tabbed -- "$@"
ext x?html?, has uzbl-browser, X, flag f = uzbl-browser -- "$@"
ext x?html?, has uzbl-core, X, flag f = uzbl-core -- "$@"
ext x?html?, has midori, X, flag f = midori -- "$@"
ext x?html?, has chromium-browser, X, flag f = chromium-browser -- "$@"
ext x?html?, has chromium, X, flag f = chromium -- "$@"
ext x?html?, has google-chrome, X, flag f = google-chrome -- "$@"
ext x?html?, has opera, X, flag f = opera -- "$@"
ext x?html?, has firefox, X, flag f = firefox -- "$@"
ext x?html?, has seamonkey, X, flag f = seamonkey -- "$@"
ext x?html?, has iceweasel, X, flag f = iceweasel -- "$@"
ext x?html?, has epiphany, X, flag f = epiphany -- "$@"
ext x?html?, has konqueror, X, flag f = konqueror -- "$@"
ext x?html?, has elinks, terminal = elinks "$@"
ext x?html?, has links2, terminal = links2 "$@"
ext x?html?, has links, terminal = links "$@"
ext x?html?, has lynx, terminal = lynx -- "$@"
ext x?html?, has w3m, terminal = w3m "$@"
#-------------------------------------------
# Misc
#-------------------------------------------
# Define the "editor" for text files as first action
mime ^text, label editor = ${VISUAL:-$EDITOR} -- "$@"
mime ^text, label pager = "$PAGER" -- "$@"
!mime ^text, label editor, ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
!mime ^text, label pager, ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
ext 1 = man "$1"
ext s[wmf]c, has zsnes, X = zsnes "$1"
ext s[wmf]c, has snes9x-gtk,X = snes9x-gtk "$1"
ext nes, has fceux, X = fceux "$1"
ext exe = wine "$1"
name ^[mM]akefile$ = make
#--------------------------------------------
# Code
#-------------------------------------------
ext py = python -- "$1"
ext pl = perl -- "$1"
ext rb = ruby -- "$1"
ext js = node -- "$1"
ext sh = sh -- "$1"
ext php = php -- "$1"
#--------------------------------------------
# Audio without X
#-------------------------------------------
mime ^audio|ogg$, terminal, has mpv = mpv -- "$@"
mime ^audio|ogg$, terminal, has mplayer2 = mplayer2 -- "$@"
mime ^audio|ogg$, terminal, has mplayer = mplayer -- "$@"
ext midi?, terminal, has wildmidi = wildmidi -- "$@"
#--------------------------------------------
# Video/Audio with a GUI
#-------------------------------------------
mime ^video|audio, has gmplayer, X, flag f = gmplayer -- "$@"
mime ^video|audio, has smplayer, X, flag f = smplayer "$@"
mime ^video, has mpv, X, flag f = mpv -- "$@"
mime ^video, has mpv, X, flag f = mpv --fs -- "$@"
mime ^video, has mplayer2, X, flag f = mplayer2 -- "$@"
mime ^video, has mplayer2, X, flag f = mplayer2 -fs -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -fs -- "$@"
mime ^video|audio, has vlc, X, flag f = vlc -- "$@"
mime ^video|audio, has totem, X, flag f = totem -- "$@"
mime ^video|audio, has totem, X, flag f = totem --fullscreen -- "$@"
#--------------------------------------------
# Video without X:
#-------------------------------------------
mime ^video, terminal, !X, has mpv = mpv -- "$@"
mime ^video, terminal, !X, has mplayer2 = mplayer2 -- "$@"
mime ^video, terminal, !X, has mplayer = mplayer -- "$@"
#-------------------------------------------
# Documents
#-------------------------------------------
ext pdf, has llpp, X, flag f = llpp "$@"
ext pdf, has zathura, X, flag f = zathura -- "$@"
ext pdf, has mupdf, X, flag f = mupdf "$@"
ext pdf, has mupdf-x11,X, flag f = mupdf-x11 "$@"
ext pdf, has apvlv, X, flag f = apvlv -- "$@"
ext pdf, has xpdf, X, flag f = xpdf -- "$@"
ext pdf, has evince, X, flag f = evince -- "$@"
ext pdf, has atril, X, flag f = atril -- "$@"
ext pdf, has okular, X, flag f = okular -- "$@"
ext pdf, has epdfview, X, flag f = epdfview -- "$@"
ext pdf, has qpdfview, X, flag f = qpdfview "$@"
ext pdf, has open, X, flag f = open "$@"
ext docx?, has catdoc, terminal = catdoc -- "$@" | "$PAGER"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has gnumeric, X, flag f = gnumeric -- "$@"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has kspread, X, flag f = kspread -- "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has libreoffice, X, flag f = libreoffice "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has soffice, X, flag f = soffice "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has ooffice, X, flag f = ooffice "$@"
ext djvu, has zathura,X, flag f = zathura -- "$@"
ext djvu, has evince, X, flag f = evince -- "$@"
ext djvu, has atril, X, flag f = atril -- "$@"
ext epub, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
ext mobi, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
#-------------------------------------------
# Image Viewing:
#-------------------------------------------
mime ^image/svg, has inkscape, X, flag f = inkscape -- "$@"
mime ^image/svg, has display, X, flag f = display -- "$@"
mime ^image, has pqiv, X, flag f = pqiv -- "$@"
mime ^image, has sxiv, X, flag f = sxiv -- "$@"
mime ^image, has feh, X, flag f = feh -- "$@"
mime ^image, has mirage, X, flag f = mirage -- "$@"
mime ^image, has ristretto, X, flag f = ristretto "$@"
mime ^image, has eog, X, flag f = eog -- "$@"
mime ^image, has eom, X, flag f = eom -- "$@"
mime ^image, has nomacs, X, flag f = nomacs -- "$@"
mime ^image, has geeqie, X, flag f = geeqie -- "$@"
mime ^image, has gimp, X, flag f = gimp -- "$@"
ext xcf, X, flag f = gimp -- "$@"
#-------------------------------------------
# Archives
#-------------------------------------------
# avoid password prompt by providing empty password
ext 7z, has 7z = 7z -p l "$@" | "$PAGER"
# This requires atool
ext ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --list --each -- "$@" | "$PAGER"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --list --each -- "$@" | "$PAGER"
ext 7z|ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --extract --each -- "$@"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --extract --each -- "$@"
# Listing and extracting archives without atool:
ext tar|gz|bz2|xz, has tar = tar vvtf "$1" | "$PAGER"
ext tar|gz|bz2|xz, has tar = for file in "$@"; do tar vvxf "$file"; done
ext bz2, has bzip2 = for file in "$@"; do bzip2 -dk "$file"; done
ext zip, has unzip = unzip -l "$1" | less
ext zip, has unzip = for file in "$@"; do unzip -d "${file%.*}" "$file"; done
ext ace, has unace = unace l "$1" | less
ext ace, has unace = for file in "$@"; do unace e "$file"; done
ext rar, has unrar = unrar l "$1" | less
ext rar, has unrar = for file in "$@"; do unrar x "$file"; done
#-------------------------------------------
# Misc
#-------------------------------------------
label wallpaper, number 11, mime ^image, has feh, X = feh --bg-scale "$1"
label wallpaper, number 12, mime ^image, has feh, X = feh --bg-tile "$1"
label wallpaper, number 13, mime ^image, has feh, X = feh --bg-center "$1"
label wallpaper, number 14, mime ^image, has feh, X = feh --bg-fill "$1"
# Define the editor for non-text files + pager as last action
!mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ask
label editor, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
label pager, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
# The very last action, so that it's never triggered accidentally, is to execute a program:
mime application/x-executable = "$1"

178
.config/ranger/scope.sh Executable file
View File

@ -0,0 +1,178 @@
#!/usr/bin/env bash
set -o noclobber -o noglob -o nounset -o pipefail
IFS=$'\n'
# If the option `use_preview_script` is set to `true`,
# then this script will be called and its output will be displayed in ranger.
# ANSI color codes are supported.
# STDIN is disabled, so interactive scripts won't work properly
# This script is considered a configuration file and must be updated manually.
# It will be left untouched if you upgrade ranger.
# Meanings of exit codes:
# code | meaning | action of ranger
# -----+------------+-------------------------------------------
# 0 | success | Display stdout as preview
# 1 | no preview | Display no preview at all
# 2 | plain text | Display the plain content of the file
# 3 | fix width | Don't reload when width changes
# 4 | fix height | Don't reload when height changes
# 5 | fix both | Don't ever reload
# 6 | image | Display the image `$IMAGE_CACHE_PATH` points to as an image preview
# 7 | image | Display the file directly as an image
# Script arguments
FILE_PATH="${1}" # Full path of the highlighted file
PV_WIDTH="${2}" # Width of the preview pane (number of fitting characters)
PV_HEIGHT="${3}" # Height of the preview pane (number of fitting characters)
IMAGE_CACHE_PATH="${4}" # Full path that should be used to cache image preview
PV_IMAGE_ENABLED="${5}" # 'True' if image previews are enabled, 'False' otherwise.
FILE_EXTENSION="${FILE_PATH##*.}"
FILE_EXTENSION_LOWER=$(echo ${FILE_EXTENSION} | tr '[:upper:]' '[:lower:]')
# Settings
HIGHLIGHT_SIZE_MAX=262143 # 256KiB
HIGHLIGHT_TABWIDTH=8
HIGHLIGHT_STYLE='pablo'
PYGMENTIZE_STYLE='autumn'
handle_extension() {
case "${FILE_EXTENSION_LOWER}" in
# Archive
a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
atool --list -- "${FILE_PATH}" && exit 5
bsdtar --list --file "${FILE_PATH}" && exit 5
exit 1;;
rar)
# Avoid password prompt by providing empty password
unrar lt -p- -- "${FILE_PATH}" && exit 5
exit 1;;
7z)
# Avoid password prompt by providing empty password
7z l -p -- "${FILE_PATH}" && exit 5
exit 1;;
# PDF
pdf)
# Preview as text conversion
pdftotext -l 10 -nopgbrk -q -- "${FILE_PATH}" - && exit 5
exiftool "${FILE_PATH}" && exit 5
exit 1;;
# BitTorrent
torrent)
transmission-show -- "${FILE_PATH}" && exit 5
exit 1;;
# OpenDocument
odt|ods|odp|sxw)
# Preview as text conversion
odt2txt "${FILE_PATH}" && exit 5
exit 1;;
# HTML
htm|html|xhtml)
# Preview as text conversion
w3m -dump "${FILE_PATH}" && exit 5
lynx -dump -- "${FILE_PATH}" && exit 5
elinks -dump "${FILE_PATH}" && exit 5
;; # Continue with next handler on failure
esac
}
handle_image() {
local mimetype="${1}"
case "${mimetype}" in
# SVG
# image/svg+xml)
# convert "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
# exit 1;;
# Image
image/*)
local orientation
orientation="$( identify -format '%[EXIF:Orientation]\n' -- "${FILE_PATH}" )"
# If orientation data is present and the image actually
# needs rotating ("1" means no rotation)...
if [[ -n "$orientation" && "$orientation" != 1 ]]; then
# ...auto-rotate the image according to the EXIF data.
convert -- "${FILE_PATH}" -auto-orient "${IMAGE_CACHE_PATH}" && exit 6
fi
# `w3mimgdisplay` will be called for all images (unless overriden as above),
# but might fail for unsupported types.
exit 7;;
# Video
video/*)
# Thumbnail
ffmpegthumbnailer -i "${FILE_PATH}" -o "${IMAGE_CACHE_PATH}" -s 0 && exit 6
exit 1;;
# PDF
application/pdf)
pdftoppm -f 1 -l 1 \
-scale-to-x 1920 \
-scale-to-y -1 \
-singlefile \
-jpeg -tiffcompression jpeg \
-- "${FILE_PATH}" "${IMAGE_CACHE_PATH%.*}" \
&& exit 6 || exit 1;;
esac
}
handle_mime() {
local mimetype="${1}"
case "${mimetype}" in
# Text
text/* | */xml)
# Syntax highlight
if [[ "$( stat --printf='%s' -- "${FILE_PATH}" )" -gt "${HIGHLIGHT_SIZE_MAX}" ]]; then
exit 2
fi
if [[ "$( tput colors )" -ge 256 ]]; then
local pygmentize_format='terminal256'
local highlight_format='xterm256'
else
local pygmentize_format='terminal'
local highlight_format='ansi'
fi
highlight --replace-tabs="${HIGHLIGHT_TABWIDTH}" --out-format="${highlight_format}" \
--style="${HIGHLIGHT_STYLE}" --force -- "${FILE_PATH}" && exit 5
# pygmentize -f "${pygmentize_format}" -O "style=${PYGMENTIZE_STYLE}" -- "${FILE_PATH}" && exit 5
exit 2;;
# Image
image/*)
# Preview as text conversion
# img2txt --gamma=0.6 --width="${PV_WIDTH}" -- "${FILE_PATH}" && exit 4
exiftool "${FILE_PATH}" && exit 5
exit 1;;
# Video and audio
video/* | audio/*)
mediainfo "${FILE_PATH}" && exit 5
exiftool "${FILE_PATH}" && exit 5
exit 1;;
esac
}
handle_fallback() {
echo '----- File Type Classification -----' && file --dereference --brief -- "${FILE_PATH}" && exit 5
exit 1
}
MIMETYPE="$( file --dereference --brief --mime-type -- "${FILE_PATH}" )"
if [[ "${PV_IMAGE_ENABLED}" == 'True' ]]; then
handle_image "${MIMETYPE}"
fi
handle_extension
handle_mime "${MIMETYPE}"
handle_fallback
exit 1

45
.config/redshift.conf Normal file
View File

@ -0,0 +1,45 @@
; Global settings for redshift
[redshift]
; Set the day and night screen temperatures
temp-night=3200
; Enable/Disable a smooth transition between day and night
; 0 will cause a direct change from day to night screen temperature.
; 1 will gradually increase or decrease the screen temperature.
transition=1
; Set the screen brightness. Default is 1.0.
;brightness=0.9
; It is also possible to use different settings for day and night
; since version 1.8.
;brightness-day=0.7
;brightness-night=0.4
; Set the screen gamma (for all colors, or each color channel
; individually)
;gamma=0.8
;gamma=0.8:0.7:0.8
; This can also be set individually for day and night since
; version 1.10.
;gamma-day=0.8:0.7:0.8
;gamma-night=0.7
; Set the location-provider: 'geoclue', 'geoclue2', 'manual'
; type 'redshift -l list' to see possible values.
; The location provider settings are in a different section.
location-provider=manual
; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values.
; 'randr' is the preferred method, 'vidmode' is an older API.
; but works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=randr
; Configuration of the location-provider:
; type 'redshift -l PROVIDER:help' to see the settings.
; ex: 'redshift -l manual:help'
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
; are negative numbers.
[manual]
lat=48.5
lon=2.2

3
.config/rofi/config Normal file
View File

@ -0,0 +1,3 @@
rofi.combi-modi: window,drun,ssh,combi
rofi.modi: combi
rofi.theme: ~/.cache/wal/colors-rofi-dark.rasi

5
.config/rofi/wifi Normal file
View File

@ -0,0 +1,5 @@
# Fields to be displayed
FIELDS=ACTIVE,SSID,SECURITY,BARS
#font
FONT="DejaVu Sans Mono 10"

1
.gitattributes vendored Normal file
View File

@ -0,0 +1 @@
*.org linguist-detectable=true

36
.gitignore vendored Normal file
View File

@ -0,0 +1,36 @@
\.emacs\.d
\.spacemacs\.before_ecb_2\.50
/.config/.ncmpcpp/error.log
/.config/mpd/log
.config/mpd/log
\.config/mpd/state
\.config/mpd/pid
/.config/mpv/watch_later/13AB0D2614969EFE70C38F82C0957DFC
/.config/mpv/watch_later/9F499767C1E72049EAD927CC571282F1
.config/mpd/database
/.config/mpv/watch_later/AB7444F088FE5AB0D85BF0939606DB3B
*.part3~
\.config/mpv/watch_later/
\.config/mpd/playlists/
\.config/i3/config~
*~
*.bak
/Wallpapers/06-DESKTOP_dog_gender.png
/Wallpapers/06_DESKTOP_noun_case.png
\.config/ranger/history
\.config/ranger/tagged
\.config/ranger/bookmarks
\.config/ranger/ranger
completer.hist

1
.gitignore_global Normal file
View File

@ -0,0 +1 @@
*~

32
.nanorc Normal file
View File

@ -0,0 +1,32 @@
set autoindent
set backup
set boldtext
set constantshow
set linenumbers
set morespace
set smarthome
set smooth
set softwrap
set tabsize 2
set tabstospaces
include /usr/share/nano/nanorc.nanorc
include /usr/share/nano/asm.nanorc
include /usr/share/nano/autoconf.nanorc
include /usr/share/nano/changelog.nanorc
include /usr/share/nano/c.nanorc
include /usr/share/nano/cmake.nanorc
include /usr/share/nano/css.nanorc
include /usr/share/nano/default.nanorc
include /usr/share/nano/html.nanorc
include /usr/share/nano/java.nanorc
include /usr/share/nano/javascript.nanorc
include /usr/share/nano/json.nanorc
include /usr/share/nano/makefile.nanorc
include /usr/share/nano/man.nanorc
include /usr/share/nano/nanohelp.nanorc
include /usr/share/nano/python.nanorc
include /usr/share/nano/rust.nanorc
include /usr/share/nano/sh.nanorc
include /usr/share/nano/tex.nanorc
include /usr/share/nano/xml.nanorc
include /usr/share/nano/yaml.nanorc

3
.rustfmt.toml Normal file
View File

@ -0,0 +1,3 @@
reorder_imports = true
binop_separator = "Back"
max_width = 80

6
.signature Normal file
View File

@ -0,0 +1,6 @@
Lucien “Phundrak” Cartier-Tilet
Étudiant et tuteur en Licence Informatique
Student and tutor in Computer Science studies
Université Vincennes-Saint-Denis (Paris VIII)
https://phundrak.fr (Français)
https://en.phundrak.fr (English)

1107
.spacemacs Normal file
View File

File diff suppressed because it is too large Load Diff

224
.zshrc Executable file
View File

@ -0,0 +1,224 @@
######################################################################
# Dotfile for the zsh shell, containing aliases and functions
# Copyright (C) 2017 Lucien Cartier-Tilet
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
######################################################################
# Line to hopefully fix tramp-mode in Spacemacs
[[ $TERM == "tramp" ]] && unsetopt zle && PS1='$ ' && return
# I want muh GL4D library
export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:/usr/local/lib"
# Lines configured by zsh-newuser-install
HISTFILE=~/.histfile
HISTSIZE=100000
SAVEHIST=100000
setopt EXTENDED_HISTORY
setopt APPEND_HISTORY
bindkey ';5D' backward-word
bindkey ';5C' forward-word
bindkey -e
set -k
# End of lines configured by zsh-newuser-install
# The following lines were added by compinstall
zstyle :compinstall filename '/home/alex/.zshrc'
autoload -Uz compinit url-quote-magic
compinit
# End of lines added by compinstall
source /usr/share/zsh/site-contrib/powerline.zsh
source /usr/share/zsh/plugins/zsh-autosuggestions/zsh-autosuggestions.zsh
source ~/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
source ~/.zshrc-private.zsh
autoload -Uz run-help
unalias run-help
export CC=/usr/bin/clang
export CXX=/usr/bin/clang++
export EDITOR='vim'
# export PATH=$PATH:$HOME/local/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/bin:$HOME/local/lib
TEXINPUTS=~/.tex/scheme-listings-master/:$TEXINPUTS
TEXINPUTS=~/pgfplots/tex//:$TEXINPUTS
# Safety nets
# do not delete / or prompt if deleting more than 3 files at a time
alias rm='rm -I --preserve-root'
alias rmd='rm -r --preserve-root'
# confirmation
alias mv='mv -i'
alias cp='cp -i'
alias ln='ln -i'
# Parenting changin perms on /
alias chown='chown --preserve-root'
alias chmod='chmod --preserve-root'
alias chgrp='chgrp --preserve-root'
# Tune sudo and su
alias root='sudo -i'
alias su='sudo -i'
# Get system memory, CPU usage and GPU memory info
alias meminfo='free -m -l -t'
alias psmem='ps auxf | sort -nr -k 4'
alias psmem10='ps auxf | sort -nr -k 4 | head -10'
alias pscpu='ps auxf | sort -nr -k 3'
alias pscpu10='ps auxf | sort -nr -k 3 | head -10'
alias cpuinfo='lscpu'
alias gpumeminfo='grep -i --color memory /var/log/Xorg.0.log'
# I can't type
alias exti=exit
alias exi=exit
alias ..='cd ..'
alias solo='cd ~/dotfiles/.config && ln -s compton-solo.conf compton.conf ; pkill compton ; compton'
alias multiscreen='cd ~/dotfiles/.config && ln -s compton-multi.conf compton.conf ; pkill compton ; compton'
alias grep="grep --color=auto"
alias help='run-help'
alias ll='ls -alh | less'
alias ls='ls --color'
alias lsl='ls -Alh --color'
alias la='ls -A --color'
#alias mp3='youtube-dl -x --audio-format mp3 --audio-quality 0 $*'
alias flac='youtube-dl -x --audio-format flac --audio-quality 0 $*'
# force some audio quality
alias mp3=flac
alias rainbowstream='rainbowstream -iot'
alias mpv='mpv --no-border --force-window=no'
alias feh='feh -Zx.'
alias neofetch='clear && neofetch --cpu_temp C --os_arch off --cpu_cores physical --kernel_shorthand on --uptime_shorthand tiny --w3m --source ~/dotfiles/ArjLinugz-xDDDDDDDDDDDD-neofetch.png --size 340px'
alias untar='tar -zxvf'
alias compress='tar -czf'
alias df='df -H'
alias du='du -ch'
mkcddir(){
mkdir -p "$1" && cd "$1"
}
ytdl(){
str="$1"
youtube-dl --write-sub "${str#*=}"
}
rainymood() {
volume="50"
if [ "$#" -gt "0" ]; then
volume="$1"
fi
FILE=$((RANDOM%4))
URL="https://rainymood.com/audio1110/${FILE}.ogg"
mpv "$URL" --force-window=no --volume=${volume} && rainymood
}
# Weather
we(){
if [ -n "$1" ]; then
str="$*";
curl http://wttr.in/~${str// /+}
else
curl http://wttr.in/Aubervilliers
fi
}
alias wea='we Aubervilliers'
alias wee='we Enghien+les+Bains'
alias wel='we Lyon'
alias wep='we Paris'
# Download
alias wget='wget -c'
alias 4chandl='wget -c -erobots=off -nd -rHD4chan.org -Ajpg,png,gif,webm -Rs.jpg'
# System
alias diskspace='du -S | sort -n -r |more'
alias spoweroff='systemctl poweroff -i'
alias sreboot='systemctl reboot -i'
alias zshrc='source ~/.zshrc'
alias battery='upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep -E "state|to\ full|percentage|time\ to\ empty"'
alias mountC='sudo mount -t ntfs /dev/sda4 /media/Marpa && cd /media/Marpa/C/'
alias mountD='sudo mount -t ntfs /dev/sdb1 /media/Marpa && cd /media/Marpa/Phundrak/'
alias umountC='cd ~ && sudo umount /media/C'
alias umountD='cd ~ && sudo umount /media/Marpa'
# Emacs
alias enw='emacs -nw'
alias servemacs='emacs --daemon'
alias restartemacs='emacsclient --eval "(kill-emacs)"'
# Package Manager Pacman
alias aurupdate='yay -Syua'
alias forceupdate='sudo pacman -Syyu'
alias gimme='sudo pacman -Syu'
alias install='sudo pacman -S'
alias purge='sudo pacman -Sc'
alias remove='sudo pacman -Rscnd'
alias search='yay -Ss'
alias update='sudo pacman -Syu'
alias optimize='sudo pacman-optimize && sync'
alias pac-clean='remove $(pacman -Qtdq)'
# Dev
alias clang='clang -Wall'
alias clang++='clang++ -Wall'
alias g++='g++ -Wall'
alias gcc='gcc -Wall'
alias cdebug='cmake -DCMAKE_BUILD_TYPE=Debug'
alias crelease='cmake -DCMAKE_BUILD_TYPE=Release'
alias gitlog='git log --oneline --graph --decorate'
alias swipl='clear && swipl -q && clear'
cppnew() {
mkdir -p "$1"
cd "$1";
mkdir -p src
cp ~/dotfiles/dev/CC/gitignore .gitignore
cp ~/dotfiles/dev/CC/Makefile Makefile
cp ~/dotfiles/dev/C++/main.cc src/main.cc
cp ~/dotfiles/dev/C++/CMakeLists.txt.part1 CMakeLists.txt
printf "%s" "$1" >> CMakeLists.txt
cat ~/dotfiles/dev/C++/CMakeLists.txt.part2 >> CMakeLists.txt
printf "%s" "$1" >> CMakeLists.txt
cat ~/dotfiles/dev/C++/CMakeLists.txt.part3 >> CMakeLists.txt
git init
git add .
git commit -m "initial commit"
}
cnew() {
mkdir -p "$1"
cd "$1"
mkdir -p src
cp ~/dotfiles/dev/CC/gitignore .gitignore
cp ~/dotfiles/dev/CC/Makefile Makefile
cp ~/dotfiles/dev/C/main.c src/main.c
cp ~/dotfiles/dev/C/CMakeLists.txt.part1 CMakeLists.txt
printf "%s" "$1" >> CMakeLists.txt
cat ~/dotfiles/dev/C/CMakeLists.txt.part2 >> CMakeLists.txt
printf "%s" "$1" >> CMakeLists.txt
cat ~/dotfiles/dev/C/CMakeLists.txt.part3 >> CMakeLists.txt
git init
git add .
git commit -m "initial commit"
}
s() { # do sudo, or sudo the last command if no argument given
if [[ $# == 0 ]]; then
sudo $(history -p '!!')
else
sudo "$@"
fi
}

BIN
ArjLinugz-xDDDDDDDDDDDD-neofetch.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 29 KiB

1
CODE_OF_CONDUCT.md Normal file
View File

@ -0,0 +1 @@
Don’t be a dick. Simple as that.

675
LICENSE.md Normal file
View File

@ -0,0 +1,675 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
{project} Copyright (C) {year} {fullname}
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

65
README.md Normal file
View File

@ -0,0 +1,65 @@
![](https://cdn.rawgit.com/syl20bnr/spacemacs/442d025779da2f62fc86c2082703697714db6514/assets/spacemacs-badge.svg)
P’undrak’s dotfiles
===================
This is my collection of dotfiles for my daily GNU/Linux environment, tweaked to my liking. If you wish to get these dotfiles, follow the [1.3](#*Installation).
As you can see, I personally use [zsh](https://github.com/zsh-users/zsh) as my shell of choice, and [Emacs](https://github.com/emacs-mirror/emacs) using [Spacemacs](http://spacemacs.org/) (still with Emacs keybinding) as my editor of choice.
I also use as my desktop environment [i3-gaps](https://github.com/Airblader/i3) + [polybar](https://github.com/jaagr/polybar) + [compton](https://github.com/chjj/compton). You will find some screenshot below.
Features
--------
- Handy zsh aliases
- Ready to use Emacs dotfiles optimized for C, Modern C++, Python and Java development
- Ready to use i3 dotfiles
Dependencies
------------
Because indeed there are some dependencies, and here they are. The versions mentionned are the version I am currently using. My dotfiles **might** work with earlier versions.
- [Emacs](https://github.com/emacs-mirror/emacs) &gt;= `25.3-1`
- [Spacemacs](http://spacemacs.org/) &gt;= `0.200.9@25.3.1`
- [zsh](https://github.com/zsh-users/zsh) &gt;= `5.0`
- `.zshrc` dependencies (can be ignored if commenting out the corresponding lines in the file):
- [powerline](https://github.com/powerline/powerline) &gt;= `2.6-1`
- [clang](http://clang.llvm.org/) &gt;= `5.0.0-1`
- [highlight](http://www.andre-simon.de/doku/highlight/highlight.html) &gt;= `3.39-1`
- [youtube-dl](http://rg3.github.io/youtube-dl) &gt;= `2017.10.01-1`
- [curl](https://curl.haxx.se) &gt;= `7.55.1-2`
- [neofetch](https://github.com/dylanaraps/neofetch) &gt;= `3.2.1`
- [feh](https://feh.finalrewind.org/) &gt;= `2.20-1`
- [i3-gaps](https://github.com/Airblader/i3) &gt;= `4.14.1-1`
- [compton](https://github.com/chjj/compton) &gt;= `0.1_beta2.5-8`
- [pywal](https://github.com/dylanaraps/pywal) &gt;= `0.6.9-1=`
- [dmenu](http://tools.suckless.org/dmenu/) &gt;= `4.7-1`
- [uxterm](http://invisible-island.net/xterm/) &gt;= `330-1`
- [Rust nightly](https://rustup.rs/) &gt;= `0.20`
- [eclipse-common](https://eclipse.org) &gt;= `4.7.1-1`
- [eclipse-java](https://eclipse.org) &gt;= `4.7.1-1`
- [eclipse-pydev](https://eclipse.org) &gt;= `5.9.2-1`
- [eclim](http://eclim.org/install.html)
- [texlive-core](http://tug.org/texlive) &gt;= `2017.44918-1`
- [minted](https://github.com/gpoore/minted) &gt;= `2.5-1`
Please notice that all of my package manager commands are made for `pacman` (Arch Linux); if you do not use this package manager, do not forget to comment out the related lines in `.zshrc`.
Installation
------------
To install the dotfiles, you have two options. You can either:
- replace your original dotfiles with mine in their original place.
- create symbolic links to the dotfiles in the folder where they were downloaded.
The advantage with the latter is you will have all the dotfiles in the same place, plus if at one point you want to get updates from the dotfiles, you just have to download them again at the same place and you won’t have to bother placing them again at the right place.
In any case, if you want to use my dotfiles for Emacs, **please install Spacemacs first**.
Licence
-------
All of my dotfiles (and my dotfiles only) are available under the GNU GPLv3 Licence. Please consult [LICENCE.md](https://github.com/Phundrak/dotfiles/blob/master/LICENSE.md) for more information. In short: you are free to access, edit and redistribute all of my dotfiles under the same licence and as allowed by the licence, and if you fuck up something, it’s your own responsibility.

12
config.fish Normal file
View File

@ -0,0 +1,12 @@
# emacs ansi-term support
if test -n "$EMACS"
set -x TERM eterm-color
end
# this function may be required
function fish_title
true
end
set -gx PATH $HOME/go/bin $HOME/.cargo/bin $HOME/.local/bin $HOME/.gem/ruby/2.6.0/bin $PATH
set -gx PKG_CONFIG_PATH /usr/local/lib/pkgconfig/

58
dev/conan-project/.clang-format Normal file
View File

@ -0,0 +1,58 @@
---
AlignAfterOpenBracket: Align
AlignConsecutiveAssignments: 'true'
AlignEscapedNewlines: Left
AlignOperands: 'true'
AlignTrailingComments: 'true'
AllowAllParametersOfDeclarationOnNextLine: 'true'
AllowShortBlocksOnASingleLine: 'true'
AllowShortCaseLabelsOnASingleLine: 'true'
AllowShortFunctionsOnASingleLine: Empty
AllowShortIfStatementsOnASingleLine: 'false'
AllowShortLoopsOnASingleLine: 'false'
AlwaysBreakAfterReturnType: None
AlwaysBreakBeforeMultilineStrings: 'false'
AlwaysBreakTemplateDeclarations: 'true'
BinPackArguments: 'true'
BinPackParameters: 'true'
BreakAfterJavaFieldAnnotations: 'true'
BreakBeforeBinaryOperators: All
BreakBeforeBraces: Linux
BreakBeforeInheritanceComma: 'false'
BreakBeforeTernaryOperators: 'true'
BreakConstructorInitializers: BeforeColon
BreakStringLiterals: 'true'
ColumnLimit: '80'
CompactNamespaces: 'false'
ConstructorInitializerAllOnOneLineOrOnePerLine: 'false'
Cpp11BracedListStyle: 'true'
FixNamespaceComments: 'true'
IncludeBlocks: Regroup
IndentCaseLabels: 'false'
IndentPPDirectives: AfterHash
IndentWrappedFunctionNames: 'false'
JavaScriptQuotes: Leave
JavaScriptWrapImports: 'true'
KeepEmptyLinesAtTheStartOfBlocks: 'false'
Language: Cpp
MaxEmptyLinesToKeep: '1'
NamespaceIndentation: Inner
PointerAlignment: Right
ReflowComments: 'true'
SortIncludes: 'true'
SortUsingDeclarations: 'true'
SpaceAfterCStyleCast: 'false'
SpaceAfterTemplateKeyword: 'false'
SpaceBeforeAssignmentOperators: 'true'
SpaceBeforeParens: ControlStatements
SpaceInEmptyParentheses: 'false'
SpacesBeforeTrailingComments: '2'
SpacesInAngles: 'false'
SpacesInCStyleCastParentheses: 'false'
SpacesInContainerLiterals: 'false'
SpacesInParentheses: 'false'
SpacesInSquareBrackets: 'false'
Standard: Cpp11
UseTab: ForIndentation
...

179
dev/conan-project/.gitignore vendored Normal file
View File

@ -0,0 +1,179 @@
# Created by https://www.gitignore.io/api/c,c++,ninja,macos,linux,cmake,windows,visualstudiocode
# Edit at https://www.gitignore.io/?templates=c,c++,ninja,macos,linux,cmake,windows,visualstudiocode
### C ###
# Prerequisites
*.d
# Object files
*.o
*.ko
*.obj
*.elf
# Linker output
*.ilk
*.map
*.exp
# Precompiled Headers
*.gch
*.pch
# Libraries
*.lib
*.a
*.la
*.lo
# Shared objects (inc. Windows DLLs)
*.dll
*.so
*.so.*
*.dylib
# Executables
*.exe
*.out
*.app
*.i*86
*.x86_64
*.hex
# Debug files
*.dSYM/
*.su
*.idb
*.pdb
# Kernel Module Compile Results
*.mod*
*.cmd
.tmp_versions/
modules.order
Module.symvers
Mkfile.old
dkms.conf
### C++ ###
# Prerequisites
# Compiled Object files
*.slo
# Precompiled Headers
# Compiled Dynamic libraries
# Fortran module files
*.mod
*.smod
# Compiled Static libraries
*.lai
# Executables
### CMake ###
CMakeLists.txt.user
CMakeCache.txt
CMakeFiles
CMakeScripts
Testing
Makefile
cmake_install.cmake
install_manifest.txt
compile_commands.json
CTestTestfile.cmake
_deps
### CMake Patch ###
# External projects
*-prefix/
### Linux ###
*~
# temporary files which can be created if a process still has a handle open of a deleted file
.fuse_hidden*
# KDE directory preferences
.directory
# Linux trash folder which might appear on any partition or disk
.Trash-*
# .nfs files are created when an open file is removed but is still being accessed
.nfs*
### macOS ###
# General
.DS_Store
.AppleDouble
.LSOverride
# Icon must end with two \r
Icon
# Thumbnails
._*
# Files that might appear in the root of a volume
.DocumentRevisions-V100
.fseventsd
.Spotlight-V100
.TemporaryItems
.Trashes
.VolumeIcon.icns
.com.apple.timemachine.donotpresent
# Directories potentially created on remote AFP share
.AppleDB
.AppleDesktop
Network Trash Folder
Temporary Items
.apdisk
### Ninja ###
.ninja_deps
.ninja_log
### VisualStudioCode ###
.vscode/*
!.vscode/settings.json
!.vscode/tasks.json
!.vscode/launch.json
!.vscode/extensions.json
### VisualStudioCode Patch ###
# Ignore all local history of files
.history
### Windows ###
# Windows thumbnail cache files
Thumbs.db
ehthumbs.db
ehthumbs_vista.db
# Dump file
*.stackdump
# Folder config file
[Dd]esktop.ini
# Recycle Bin used on file shares
$RECYCLE.BIN/
# Windows Installer files
*.cab
*.msi
*.msix
*.msm
*.msp
# Windows shortcuts
*.lnk
# End of https://www.gitignore.io/api/c,c++,ninja,macos,linux,cmake,windows,visualstudiocode
build

56
dev/conan-project/CMakeLists.txt Normal file
View File

@ -0,0 +1,56 @@
cmake_minimum_required(VERSION 3.14)
project("PROJECTNAME"
VERSION 0.1
DESCRIPTION "Description of PROJECTNAME"
HOMEPAGE_URL "https://labs.phundrak.fr/phundrak/PROJECTNAME"
LANGUAGES CXX)
set(CMAKE_CXX_COMPILER /usr/bin/clang++)
file(GLOB SRC_FILES "src/*.cc")
list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}/cmake")
include(functions)
include(${CMAKE_BINARY_DIR}/conanbuildinfo.cmake)
conan_basic_setup()
enable_cxx_compiler_flag_if_supported("-Wall")
enable_cxx_compiler_flag_if_supported("-pedantic")
if(CMAKE_BUILD_TYPE STREQUAL "Debug")
enable_cxx_compiler_flag_if_supported("-g")
else()
enable_cxx_compiler_flag_if_supported("-O3")
enable_cxx_compiler_flag_if_supported("-flto")
endif()
# include_directories(<PUBLIC HEADER DIRECTORIES>)
# Main software
set(TGT PROJECTNAME)
add_executable(${TGT} ${SRC_FILES})
target_compile_features(${TGT} PRIVATE cxx_std_17)
target_include_directories(${TGT} PRIVATE include/PROJECTNAME)
target_link_libraries(${TGT} ${CONAN_LIBS})
# Tests, -DTESTS=True to activate
if(TESTS)
set(TESTTGT PROJECTNAME-tests)
file(GLOB TEST_FILES "tests/tests.cc")
add_executable(${TESTTGT} ${TEST_FILES})
target_compile_features(${TESTTGT} PRIVATE cxx_std_17)
target_include_directories(${TESTTGT} PRIVATE include/PROJECTNAME)
target_link_libraries(${TESTTGT} ${CONAN_LIBS})
endif()
# OS specific instructions.
if(APPLE)
elseif(WIN32)
# Windows developer environment specific instructions.
if(MINGW)
elseif(MSYS)
elseif(CYGWIN)
endif()
elseif(UNIX)
else()
endif()

21
dev/conan-project/LICENSE Normal file
View File

@ -0,0 +1,21 @@
MIT License
Copyright (c) 2019 Jinsoo Heo
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

60
dev/conan-project/README.org Normal file
View File

@ -0,0 +1,60 @@
[[http://spacemacs.org][file:https://cdn.rawgit.com/syl20bnr/spacemacs/442d025779da2f62fc86c2082703697714db6514/assets/spacemacs-badge.svg]]
* PROJECTNAME
PROJECTNAME is a C++17 project written for and built with CMake and Ninja.
* How to build PROJECTNAME
You will ned to have Ninja and Conan installed. To install Ninja, install the
appropriate package offered by your package manager (~ninja-build~ on Debian,
~ninja~ on Arch Linux and Void Linux), and to install conan, use ~pip~.
#+begin_src shell
pip install --user conan
#+end_src
This project is built with conan, ninja and cmake using clang-7 for C++17. To
use it, first install clang-7 and lldb 7, then run this:
#+begin_src shell
conan profile new default --detect
conan profile update settings.compiler=clang default
conan profile update settings.compiler.version=7.0 default
conan profile update settings.compiler.libcxx=libstdc++11 default
conan profile update env.CC=/bin/clang default
conan profile update env.CXX=/bin/clang++ default
#+end_src
If you do not wish to overwrite your ~default~ profile, you can instead create a
new one, for instance ~clang~. To do so, write the name of your new profile (in
this example ~clang~) instead of ~default~ in the commands shown above.
Then, To build and run the program, go to the root of the project and run this:
#+begin_src shell
mkdir build && cd build
conan install .. --build missing
cmake -DCMAKE_CXX_COMPILER=clang++ .. -G Ninja
cmake --build .
#+end_src
If you want to use another profile than your default one, you should run the
following line instead of the second line:
#+begin_src shell
conan install .. --build missing --profile <your_profile>
#+end_src
If you wish to build the project’s tests in addition to the project itself, you
can add the option ~-DTESTS=True~ to the first ~cmake~ command to build the
project’s tests too.
#+begin_src shell
cmake -DCMAKE_CXX_COMPILER=clang++ -DTESTS=True .. -G Ninja
#+end_src
If you do not wish to build your project with Ninja but with another generator,
such as Unix Makefiles, simply replace ~Ninja~ in the second to last ~cmake~
command with the name of your generator. For instance:
#+begin_src shell
cmake -DCMAKE_CXX_COMPILER=clang++ .. -G "Unix Makefiles"
#+end_src
You can still build your project by running ~cmake --build .~ or by running
~make~ manually.
* Credits
Awesome C++ Template by [[https://github.com/devkoriel/AwesomeCppTemplate][devkoriel]].

12
dev/conan-project/cmake/functions.cmake Normal file
View File

@ -0,0 +1,12 @@
INCLUDE(CheckCXXCompilerFlag)
function(enable_cxx_compiler_flag_if_supported flag)
string(FIND "${CMAKE_CXX_FLAGS}" "${flag}" flag_already_set)
if(flag_already_set EQUAL -1)
check_cxx_compiler_flag("${flag}" flag_supported)
if(flag_supported)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${flag}" PARENT_SCOPE)
endif()
unset(flag_supported CACHE)
endif()
endfunction()

16
dev/conan-project/conanfile.py Normal file
View File

@ -0,0 +1,16 @@
from conans import ConanFile, CMake
class PROJECTNAMEConan(ConanFile):
settings = "os", "compiler", "build_type", "arch"
requires = "gtest/1.8.1@bincrafters/stable"
generators = "cmake", "gcc", "txt"
def imports(self):
self.copy("*.dll", dst="bin", src="bin") # From bin to bin
self.copy("*.dylib*", dst="bin", src="lib") # From lib to bin
def build(self):
cmake = CMake(self)
cmake.configure()
cmake.build()

2495
dev/conan-project/doc/Doxyfile Executable file
View File

File diff suppressed because it is too large Load Diff

6
dev/conan-project/src/main.cc Normal file
View File

@ -0,0 +1,6 @@
#include <iostream>
int main(int argc, char* argv[]) {
std::cout << "Hello World!" << std::endl;
return 0;
}

16
dev/conan-project/src/main.cpp Normal file
View File

@ -0,0 +1,16 @@
#include "Poco/MD5Engine.h"
#include "Poco/DigestStream.h"
#include "class.hpp"
#include <iostream>
int main(int argc, char** argv)
{
Poco::MD5Engine md5;
Poco::DigestOutputStream ds(md5);
ds << "abcdefghijklmnopqrstuvwxyz";
ds.close();
std::cout << Poco::DigestEngine::digestToHex(md5.digest()) << std::endl;
return 0;
}

16
dev/conan-project/tests/tests.cc Normal file
View File

@ -0,0 +1,16 @@
#include <gtest/gtest.h>
TEST(SquareRootTest, PositiveNos) {
ASSERT_EQ(6, 2 * 3);
ASSERT_EQ(6, -2 * -3);
}
TEST(SquareRootTest, NegativeNos) {
ASSERT_EQ(-6, -2 * 3);
ASSERT_EQ(-6, 2 * -3);
}
int main(int argc, char **argv) {
testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}

58
dev/templateC++/.clang-format Normal file
View File

@ -0,0 +1,58 @@
---
AlignAfterOpenBracket: Align
AlignConsecutiveAssignments: 'true'
AlignEscapedNewlines: Left
AlignOperands: 'true'
AlignTrailingComments: 'true'
AllowAllParametersOfDeclarationOnNextLine: 'true'
AllowShortBlocksOnASingleLine: 'true'
AllowShortCaseLabelsOnASingleLine: 'true'
AllowShortFunctionsOnASingleLine: Empty
AllowShortIfStatementsOnASingleLine: 'false'
AllowShortLoopsOnASingleLine: 'false'
AlwaysBreakAfterReturnType: None
AlwaysBreakBeforeMultilineStrings: 'false'
AlwaysBreakTemplateDeclarations: 'true'
BinPackArguments: 'true'
BinPackParameters: 'true'
BreakAfterJavaFieldAnnotations: 'true'
BreakBeforeBinaryOperators: All
BreakBeforeBraces: Linux
BreakBeforeInheritanceComma: 'false'
BreakBeforeTernaryOperators: 'true'
BreakConstructorInitializers: BeforeColon
BreakStringLiterals: 'true'
ColumnLimit: '80'
CompactNamespaces: 'false'
ConstructorInitializerAllOnOneLineOrOnePerLine: 'false'
Cpp11BracedListStyle: 'true'
FixNamespaceComments: 'true'
IncludeBlocks: Regroup
IndentCaseLabels: 'false'
IndentPPDirectives: AfterHash
IndentWrappedFunctionNames: 'false'
JavaScriptQuotes: Leave
JavaScriptWrapImports: 'true'
KeepEmptyLinesAtTheStartOfBlocks: 'false'
Language: Cpp
MaxEmptyLinesToKeep: '1'
NamespaceIndentation: Inner
PointerAlignment: Right
ReflowComments: 'true'
SortIncludes: 'true'
SortUsingDeclarations: 'true'
SpaceAfterCStyleCast: 'false'
SpaceAfterTemplateKeyword: 'false'
SpaceBeforeAssignmentOperators: 'true'
SpaceBeforeParens: ControlStatements
SpaceInEmptyParentheses: 'false'
SpacesBeforeTrailingComments: '2'
SpacesInAngles: 'false'
SpacesInCStyleCastParentheses: 'false'
SpacesInContainerLiterals: 'false'
SpacesInParentheses: 'false'
SpacesInSquareBrackets: 'false'
Standard: Cpp11
UseTab: ForIndentation
...

4
dev/templateC++/.gitignore vendored Normal file
View File

@ -0,0 +1,4 @@
bin
build
debug
!.gitignore

26
dev/templateC++/CMakeLists.txt Normal file
View File

@ -0,0 +1,26 @@
cmake_minimum_required(VERSION 2.8 FATAL_ERROR)
set(CMAKE_LEGACY_CYGWIN_WIN32 0)
project("PROJECTNAME")
set(TGT "PROJECTNAME")
set(${TGT}_VERSION_MAJOR 0)
set(${TGT}_VERSION_MINOR 1)
set(CXX_COVERAGE_COMPILE_FLAGS "-pedantic -Wall -Wextra -Wold-style-cast -Woverloaded-virtual -Wfloat-equal -Wwrite-strings -Wpointer-arith -Wcast-qual -Wcast-align -Wconversion -Wsign-conversion -Wshadow -Weffc++ -Wredundant-decls -Wdouble-promotion -Winit-self -Wswitch-default -Wswitch-enum -Wundef -Winline -Wunused -Wnon-virtual-dtor")
set(CMAKE_CXX_FLAGS_DEBUG "${CXX_COVERAGE_COMPILE_FLAGS} -DDebug -g -pg")
set(CMAKE_CXX_FLAGS_RELEASE "${CXX_COVERAGE_COMPILE_FLAGS} -O3 -flto")
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_STANDARD_REQUIRED YES)
set(CMAKE_CXX_EXTENSIONS OFF)
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "../bin/")
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG "../debug/")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${CXX_COVERAGE_COMPILE_FLAGS}")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${CXX_COVERAGE_COMPILE_FLAGS}")
include_directories(include)
file(GLOB SOURCES "src/*.cc")
add_executable(${TGT} ${SOURCES})

12
dev/templateC++/Makefile Normal file
View File

@ -0,0 +1,12 @@
release:
@mkdir -p build bin
@cd build && cmake -DCMAKE_BUILD_TYPE=Release .. && make
debug:
@mkdir -p build debug
@cd build && cmake -DCMAKE_BUILD_TYPE=Debug .. && make
clean:
@rm -rf bin
@rm -rf build
@rm -rf debug

14
dev/templateC++/README.org Normal file
View File

@ -0,0 +1,14 @@
[[http://spacemacs.org][file:https://cdn.rawgit.com/syl20bnr/spacemacs/442d025779da2f62fc86c2082703697714db6514/assets/spacemacs-badge.svg]]
* PROJECTNAME
PROJECTNAME is a C++17 project written for and built with CMake.
* How to build PROJECTNAME
You can directly run either ~make~ or ~make release~ to compile the release
version of the binaries which will be generated in ~bin/~. If you wish to
compile its debug version instead, run ~make debug~ to generate the binaries in
the ~debug/~ directory. Once you have ran ~make~ at the root of the project, you
can recompile the project from the ~build/~ directory if you wish to avoid to
re-run CMake.

2495
dev/templateC++/doc/Doxyfile Executable file
View File

File diff suppressed because it is too large Load Diff

6
dev/templateC++/src/main.cc Normal file
View File

@ -0,0 +1,6 @@
#include <iostream>
int main(int argc, char* argv[]) {
std::cout << "Hello World!" << std::endl;
return 0;
}

58
dev/templateC/.clang-format Normal file
View File

@ -0,0 +1,58 @@
---
AlignAfterOpenBracket: Align
AlignConsecutiveAssignments: 'true'
AlignEscapedNewlines: Left
AlignOperands: 'true'
AlignTrailingComments: 'true'
AllowAllParametersOfDeclarationOnNextLine: 'true'
AllowShortBlocksOnASingleLine: 'true'
AllowShortCaseLabelsOnASingleLine: 'true'
AllowShortFunctionsOnASingleLine: Empty
AllowShortIfStatementsOnASingleLine: 'false'
AllowShortLoopsOnASingleLine: 'false'
AlwaysBreakAfterReturnType: None
AlwaysBreakBeforeMultilineStrings: 'false'
AlwaysBreakTemplateDeclarations: 'true'
BinPackArguments: 'true'
BinPackParameters: 'true'
BreakAfterJavaFieldAnnotations: 'true'
BreakBeforeBinaryOperators: All
BreakBeforeBraces: Linux
BreakBeforeInheritanceComma: 'false'
BreakBeforeTernaryOperators: 'true'
BreakConstructorInitializers: BeforeColon
BreakStringLiterals: 'true'
ColumnLimit: '80'
CompactNamespaces: 'false'
ConstructorInitializerAllOnOneLineOrOnePerLine: 'false'
Cpp11BracedListStyle: 'true'
FixNamespaceComments: 'true'
IncludeBlocks: Regroup
IndentCaseLabels: 'false'
IndentPPDirectives: AfterHash
IndentWrappedFunctionNames: 'false'
JavaScriptQuotes: Leave
JavaScriptWrapImports: 'true'
KeepEmptyLinesAtTheStartOfBlocks: 'false'
Language: Cpp
MaxEmptyLinesToKeep: '1'
NamespaceIndentation: Inner
PointerAlignment: Right
ReflowComments: 'true'
SortIncludes: 'true'
SortUsingDeclarations: 'true'
SpaceAfterCStyleCast: 'false'
SpaceAfterTemplateKeyword: 'false'
SpaceBeforeAssignmentOperators: 'true'
SpaceBeforeParens: ControlStatements
SpaceInEmptyParentheses: 'false'
SpacesBeforeTrailingComments: '2'
SpacesInAngles: 'false'
SpacesInCStyleCastParentheses: 'false'
SpacesInContainerLiterals: 'false'
SpacesInParentheses: 'false'
SpacesInSquareBrackets: 'false'
Standard: Cpp11
UseTab: ForIndentation
...

4
dev/templateC/.gitignore vendored Normal file
View File

@ -0,0 +1,4 @@
bin
build
debug
!.gitignore

74
dev/templateC/CMakeLists.txt Normal file
View File

@ -0,0 +1,74 @@
cmake_minimum_required(VERSION 3.10)
project("PROJECTNAME"
VERSION 0.1
DESCRIPTION "Description of PROJECTNAME"
HOMEPAGE_URL "https://labs.phundrak.fr/phundrak/PROJECTNAME"
LANGUAGES C)
set(CMAKE_C_COMPILER /usr/bin/clang)
file(GLOB SRC_FILES "src/*.c")
list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}/cmake")
include(functions)
enable_c_compiler_flag_if_supported("-Wall")
enable_c_compiler_flag_if_supported("-pedantic")
enable_c_compiler_flag_if_supported("-Wextra")
enable_c_compiler_flag_if_supported("-Wfloat-equal")
enable_c_compiler_flag_if_supported("-Wwrite-strings")
enable_c_compiler_flag_if_supported("-Wpointer-arith")
enable_c_compiler_flag_if_supported("-Wcast-qual")
enable_c_compiler_flag_if_supported("-Wcast-align")
enable_c_compiler_flag_if_supported("-Wconversion")
enable_c_compiler_flag_if_supported("-Wshadow")
enable_c_compiler_flag_if_supported("-Wreduntant-decls")
enable_c_compiler_flag_if_supported("-Wdouble-promotion")
enable_c_compiler_flag_if_supported("-Winit-self")
enable_c_compiler_flag_if_supported("-Wswitch-default")
enable_c_compiler_flag_if_supported("-Wswitch-enum")
enable_c_compiler_flag_if_supported("-Wundef")
enable_c_compiler_flag_if_supported("-Winline")
enable_c_compiler_flag_if_supported("-Wpedantic")
enable_c_compiler_flag_if_supported("-Wsign-conversion")
enable_c_compiler_flag_if_supported("-Wnull-dereference")
enable_c_compiler_flag_if_supported("-Wuseless-cast")
enable_c_compiler_flag_if_supported("-Wformat=2")
enable_c_compiler_flag_if_supported("-Wlifetime")
if(CMAKE_BUILD_TYPE STREQUAL "Debug")
enable_c_compiler_flag_if_supported("-g")
else()
enable_c_compiler_flag_if_supported("-O3")
enable_c_compiler_flag_if_supported("-flto")
endif()
# include_directories(<PUBLIC HEADER DIRECTORIES>)
# Main software
set(TGT PROJECTNAME)
set(EXECUTABLE_OUTPUT_PATH ${PROJECT_SOURCE_DIR}/build/bin)
add_executable(${TGT} ${SRC_FILES})
target_compile_features(${TGT} PRIVATE c_std_11)
target_include_directories(${TGT} PRIVATE include/PROJECTNAME)
#target_link_libraries(${TGT})
# Tests, -DTESTS=True to activate
if(TESTS)
set(TESTTGT PROJECTNAME-tests)
file(GLOB TEST_FILES "tests/tests.c")
add_executable(${TESTTGT} ${TEST_FILES})
set_property(TARGET ${TESTTGT} PROPERTY C_STANDARD 11)
target_include_directories(${TESTTGT} PRIVATE include/PROJECTNAME)
endif()
# OS specific instructions.
if(APPLE)
elseif(WIN32)
# Windows developer environment specific instructions.
if(MINGW)
elseif(MSYS)
elseif(CYGWIN)
endif()
elseif(UNIX)
else()
endif()

12
dev/templateC/Makefile Normal file
View File

@ -0,0 +1,12 @@
release:
@mkdir -p build bin
@cd build && cmake -DCMAKE_BUILD_TYPE=Release .. && make
debug:
@mkdir -p build debug
@cd build && cmake -DCMAKE_BUILD_TYPE=Debug .. && make
clean:
@rm -rf bin
@rm -rf build
@rm -rf debug

14
dev/templateC/README.org Normal file
View File

@ -0,0 +1,14 @@
[[http://spacemacs.org][file:https://cdn.rawgit.com/syl20bnr/spacemacs/442d025779da2f62fc86c2082703697714db6514/assets/spacemacs-badge.svg]]
* PROJECTNAME
PROJECTNAME is a C11 project written for and built with CMake.
* How to build PROJECTNAME
You can directly run either ~make~ or ~make release~ to compile the release
version of the binaries which will be generated in ~bin/~. If you wish to
compile its debug version instead, run ~make debug~ to generate the binaries in
the ~debug/~ directory. Once you have ran ~make~ at the root of the project, you
can recompile the project from the ~build/~ directory if you wish to avoid to
re-run CMake.

12
dev/templateC/cmake/functions.cmake Normal file
View File

@ -0,0 +1,12 @@
INCLUDE(CheckCCompilerFlag)
function(enable_c_compiler_flag_if_supported flag)
string(FIND "${CMAKE_C_FLAGS}" "${flag}" flag_already_set)
if(flag_already_set EQUAL -1)
check_c_compiler_flag("${flag}" flag_supported)
if(flag_supported)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${flag}" PARENT_SCOPE)
endif()
unset(flag_supported CACHE)
endif()
endfunction()

2440
dev/templateC/doc/Doxyfile Normal file
View File

File diff suppressed because it is too large Load Diff

6
dev/templateC/src/main.c Normal file
View File

@ -0,0 +1,6 @@
#include <stdio.h>
int main(int argc, char* argv[]) {
printf("Hello World!\n");
return 0;
}

5
enable_thouch.sh Executable file
View File

@ -0,0 +1,5 @@
#!/bin/sh
devID=$( xinput list | grep "TouchPad" | sed -n -e 's/.*id=\([0-9]*\).*/\1/p' )
propID=$( xinput list-props $devID | grep "Tapping Enabled (" | sed -n -e 's/.*(\([0-9]*\)).*/\1/p' )
xinput set-prop $devID $propID 1

50
eshell-alias Normal file
View File

@ -0,0 +1,50 @@
alias wget wget -c $*
alias update sudo pacman -Syu
alias untar tar -xvzf $*
alias search pacman -Ss $*
alias rmf rm --preserve-root -If $*
alias rmdf rm --preserve-root -Irf $*
alias rmd rm --preserve-root -Ir $*
alias rm rm -I $*
alias remove sudo pacman -Rscnd $*
alias q exit
alias purge sudo pacman -Scc
alias psmem10 ps auxf | sort -nr -k 4 | head -10
alias psmem ps auxf | sort -nr -k 4
alias pscpu10 ps auxf | sort -nr -k 3 | head -10
alias pscpu ps auxf | sort -nr -k 3
alias p sudo pacman $*
alias optimize sudo pacman-optimize && sync
alias nmcli nmcli -p -c auto $*
alias mp3 youtube-dl -x --audio-format flac --audio-quality 0 $*
alias meminfo free -m -l -t
alias ls ls --color $*
alias lns ln -si $*
alias ll ls -alh $*
alias la ls -A --color $*
alias install sudo pacman -Sy $*
alias grep grep --color=auto $*
alias gpumeminfo grep -i --color memory /var/log/Xorg.0.log
alias gcc gcc -Wall -std=c11 $*
alias g++ g++ -Wall -std=c++17 $*
alias flac youtube-dl -x --audio-format flac --audio-quality 0
alias exti exit
alias exi exit
alias du du -ch
alias diskspace sudo df -h | grep -E "sd|lv|Size"
alias df df -H $*
alias crelease cmake -DCMAKE_BUILD_TYPE=Release $*
alias cpuinfo lscpu
alias cp cp -i $*
alias cdebug cmake -DCMAKE_BUILD_TYPE=Debug $*
alias aurupdate yay -Syua
alias S sudo systemctl $*
alias lsl ls -aHl $*
alias mkdir mkdir -p $*
alias chgrp chgrp --preserve-root $*
alias chmod chmod --preserve-root $*
alias chown chown --preserve-root $*
alias clang clang -Wall $*
alias clang++ clang++ -Wall $*
alias clean clear
alias compress tar -czf $*

22
fishfunctions/4chandl.fish Executable file
View File

@ -0,0 +1,22 @@
#!/usr/bin/env fish
function 4chandl -d "Download media from 4chan thread"
if ! count $argv > /dev/null
echo 'No URL specified! Give the URL to thread as the only argument.'
end
set url $argv[1]
set regex_4cdn '\/\/is2\.4chan\.org\/[a-z]+\/[A-Za-z0-9]+\.[A-Za-z]{3,4}'
set total (curl -ks $url | grep -oE $regex_4cdn | uniq | wc -l)
echo total: $total
set counter 1
for image_url in (curl -k -s $url | grep -Eo $regex_4cdn | uniq | sed 's/^/https:/')
echo -n Downloading image $counter of $total...
wget --no-check-certificate -q -nc $image_url
echo ' Done'
set counter (math $counter + 1)
end
end

31
fishfunctions/cnew.fish Normal file
View File

@ -0,0 +1,31 @@
function cnew -d "Create new C11 project"
if count $argv > /dev/null
set projname ""
for item in $argv
switch "$item"
case -h --help
man ~/dotfiles/fishfunctions/cnew.man
return 0
case '*'
set projname $item
end
end
if [ "$projname" = "" ]
echo "Missing argument: PROJECT"
return -1
end
cp -r ~/dotfiles/dev/templateC $argv[1]
cd $argv[1]
sed -i "s/PROJECTNAME/$argv[1]/g" CMakeLists.txt
sed -i "s/PROJECTNAME/$argv[1]/g" README.org
sed -i "s/CPROJECTNAME/$argv[1]/g" doc/Doxyfile
git init
git add .
git commit -m "initial commit"
cd ..
else
echo "Missing argument: PROJECT"
return -1
end
end
complete -c cppnew -s h -l help -d 'Print Help'

26
fishfunctions/cnew.man Normal file
View File

@ -0,0 +1,26 @@
.\" Automatically generated by Pandoc 2.5
.\"
.TH "cnew" "" "" "" ""
.hy
.SH NAME
.PP
\f[B]cnew\f[R] \- New C11 Project
.SH SYNOPSIS
.PP
cnew PROJECT
.SH DESCRIPTION
.PP
Creates a new C11 CMake\-based project named PROJECT.
.SH REPORTING BUGS
.PP
Git repository available at
<https://labs.phundrak.fr/phundrak/dotfiles>.
.SH Copyright
.PP
Copyright Lucien \[dq]Phundrak\[dq] Cartier Tilet 2019\-2020.
Licence GPLv3+: GNU GPL version 3 or later
<https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
.SH AUTHORS
Lucien \[dq]Phundrak\[dq] Cartier Tilet.

16
fishfunctions/cnew.org Normal file
View File

@ -0,0 +1,16 @@
#+TITLE: cnew
#+AUTHOR: Lucien "Phundrak" Cartier Tilet
* NAME
*{{{title}}}* - New C11 Project
* SYNOPSIS
{{{title}}} PROJECT
* DESCRIPTION
Creates a new C11 CMake-based project named PROJECT.
* REPORTING BUGS
Git repository available at [[https://labs.phundrak.fr/phundrak/dotfiles]].
* Copyright
Copyright {{{author}}} 2019-2020. Licence GPLv3+: GNU GPL version 3 or later [[https://gnu.org/licenses/gpl.html]]. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

49
fishfunctions/cppnew.fish Normal file
View File

@ -0,0 +1,49 @@
function cppnew -d "Create new C++17 project" --argument-names 'projectname'
if count $argv > /dev/null
set conanproj "false"
set projname ""
set conanprojname ""
for item in $argv
switch "$item"
case -c --conan
set conanproj "true"
set conanprojname $value
case -h --help
man ~/dotfiles/fishfunctions/cppnew.man
return 0
case '*'
set projname $item
end
end
if [ "$projname" = "" ]
if [ "$conanprojname" = "" ]
echo "Missing argument: PROJECT"
return -1
end
end
if [ "$projname" = "" ]
set projname $conanprojname
end
if [ "$conanproj" = "true" ]
cp -r ~/dotfiles/dev/conan-project $projname
else
cp -r ~/dotfiles/dev/templateC++ $projname
end
cd $projname
sed -i "s/PROJECTNAME/$projname/g" README.org
sed -i "s/PROJECTNAME/$projname/g" CMakeLists.txt
if [ "$conanproj" = "true" ]
sed -i "s/PROJECTNAME/$projname/g" conanfile.py
end
sed -i "s/CPPPROJECTNAME/$projname/g" doc/Doxyfile
git init
git add .
git commit -m "initial commit"
cd ..
else
echo "Missing argument: PROJECT"
return -1
end
end
complete -c cppnew -s c -l conan -d 'Conan Project'
complete -c cppnew -s h -l help -d 'Print Help'

30
fishfunctions/cppnew.man Normal file
View File

@ -0,0 +1,30 @@
.\" Automatically generated by Pandoc 2.5
.\"
.TH "cppnew" "" "" "" ""
.hy
.SH NAME
.PP
\f[B]cppnew\f[R] \- New C++17 Project
.SH SYNOPSIS
.PP
cppnew [\-c, \[en]connan] PROJECT
.SH DESCRIPTION
.PP
Creates a new C++17 project named PROJECT, either CMake\-based only or
CMake and Conan\-based.
.TP
.B \f[C]\-c\f[R], \f[C]\-\-connan\f[R]
Creates a Conan\-based project
.SH REPORTING BUGS
.PP
Git repository available at
<https://labs.phundrak.fr/phundrak/dotfiles>.
.SH Copyright
.PP
Copyright Lucien \[dq]Phundrak\[dq] Cartier Tilet 2019\-2020.
Licence GPLv3+: GNU GPL version 3 or later
<https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
.SH AUTHORS
Lucien \[dq]Phundrak\[dq] Cartier Tilet.

18
fishfunctions/cppnew.org Normal file
View File

@ -0,0 +1,18 @@
#+TITLE: cppnew
#+AUTHOR: Lucien "Phundrak" Cartier Tilet
* NAME
*{{{title}}}* - New C++17 Project
* SYNOPSIS
{{{title}}} [-c, --connan] PROJECT
* DESCRIPTION
Creates a new C++17 project named PROJECT, either CMake-based only or CMake and Conan-based.
- ~-c~, ~--connan~ :: Creates a Conan-based project
* REPORTING BUGS
Git repository available at [[https://labs.phundrak.fr/phundrak/dotfiles]].
* Copyright
Copyright {{{author}}} 2019-2020. Licence GPLv3+: GNU GPL version 3 or later [[https://gnu.org/licenses/gpl.html]]. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

4
fishfunctions/mcd.fish Normal file
View File

@ -0,0 +1,4 @@
function mcd -d "Create directory and cd to it"
mkdir $argv[1]
cd $argv[1]
end

22
fishfunctions/rainymood.fish Normal file
View File

@ -0,0 +1,22 @@
function rainymood
set volume 50
getopts $argv | while read -l key option
switch $key
case v
set volume $option
case volume
set volume $option
end
end
if [ "$volume" != "" ]
set FILE (math (random) % 4)
set URL "https://rainymood.com/audio1110/$FILE.ogg"
mpv $URL --force-window=no --volume=$volume; and rainymood
else
echo "Missing value after -v/--volume option."
echo "Usage example:"
printf "\trainymood -v50\n\trainymood --volume 50\n"
return 1
end
end
complete -c rainymood -s v -l volume -d 'Volume of the rain (0-100)'

7
fishfunctions/we.fish Normal file
View File

@ -0,0 +1,7 @@
function we -d "Get weather at location"
if count $argv > /dev/null
curl http://wttr.in/~$argv[1]
else
curl http://wttr.in/Aubervilliers
end
end

BIN
france_ardeche_landscape_thinkpad.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 343 KiB

9
org/theme-readtheorg.setup Normal file
View File

@ -0,0 +1,9 @@
# -*- mode: org; -*-
#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="https://www.pirilampo.org/styles/readtheorg/css/htmlize.css"/>
#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="https://www.pirilampo.org/styles/readtheorg/css/readtheorg.css"/>
#+HTML_HEAD: <script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.3/jquery.min.js"></script>
#+HTML_HEAD: <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.4/js/bootstrap.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="https://www.pirilampo.org/styles/lib/js/jquery.stickytableheaders.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="https://www.pirilampo.org/styles/readtheorg/js/readtheorg.js"></script>

2
private/.gitignore vendored Normal file
View File

@ -0,0 +1,2 @@
*
!.gitignore

32
spacemacs-layers/conlanging/README.org Normal file
View File

@ -0,0 +1,32 @@
#+TITLE: Conlanging layer
# The maximum height of the logo should be 200 pixels.
[[img/conlanging.png]]
# TOC links should be GitHub style anchors.
* Table of Contents :TOC_4_gh:noexport:
- [[#description][Description]]
- [[#features][Features:]]
- [[#install][Install]]
- [[#key-bindings][Key bindings]]
* Description
This layer adds support for conlanging.
** Features:
- Conversion from translittion to other alphabets
- Open linguistic files
* Install
To use this configuration layer, add it to your =~/.spacemacs=. You will need to
add =conlanging= to the existing =dotspacemacs-configuration-layers= list in this
file.
* Key bindings
| Key Binding | Description |
|---------------+-----------------------------------------------------|
| ~SPC o l m o~ | Open ~matter.org~ file |
| ~SPC o l m r~ | Translate Mattér translitteration into runes |
| ~SPC o l m l~ | Translate Mattér translitteration into native latin |
| ~SPC o l m h~ | Open ~hjepl.org~ file |

110
spacemacs-layers/conlanging/funcs.el Normal file
View File

@ -0,0 +1,110 @@
;;; funcs.el --- Conlanging Layer functions File for Spacemacs
;;
;; Copyright (c) 2019-2020 Lucien Cartier-Tilet
;;
;; Author: Lucien Cartier-Tilet <phundrak@phundrak.fr>
;; URL: https://github.com/syl20bnr/spacemacs
;;
;; This file is not part of GNU Emacs.
;;
;;; License: GPLv3
(setq latin-to-runes-table '((", *" . "᛬")
("\\. *" . "᛭")
(" +" . "᛫")
("ċ" . "ᛇ") ("ch" . "ᛇ")
("ae" . "ᚫ") ("æ" . "ᚫ")
("dh" . "ᛋ") ("z" . "ᛋ") ("ð" . "ᛋ")
("th" . "ᚦ") ("s" . "ᚦ") ("þ" . "ᚦ")
("w" . "ᚹ") ("ƿ" . "ᚹ")
("g" . "ᚷ") ("ᵹ" . "ᚷ")
("ea" . "ᛠ")
("f" . "ᚠ")
("u" . "ᚢ")
("o" . "ᚩ")
("r" . "ᚱ")
("c" . "ᚳ")
("h" . "ᚻ")
("n" . "ᚾ")
("i" . "ᛁ")
("j" . "ᛄ")
("p" . "ᛈ")
("v" . "ᛝ")
("t" . "ᛏ")
("b" . "ᛒ")
("e" . "ᛖ")
("m" . "ᛗ")
("l" . "ᛚ")
("d" . "ᛞ")
("é" . "ᛟ")
("a" . "ᚪ")
("y" . "ᚣ")))
(setq latin-to-native-table '((" +" . " ")
("ch" . "ċ")
("ae" . "æ")
("th" . "þ") ("s" . "þ")
("dh" . "ð") ("z" . "ð")
("w" . "ƿ")
("j" . "i")))
(setq latin-to-latex-runes '((", *" . ":")
("\\. *" . "*")
(" +" . ".")
("ch" . "I") ("ċ" . "I")
("ae" . "æ")
("ea" . "\\\\ea") ("ƿ" . "w")
("dh" . "s") ("z" . "s") ("ð" . "s")
("th" . "þ") ("s" . "þ")
("v" . "\\\\ng")
("é " . "\\\\oe")))
(defun conlanging//replace-string-by-char (t-string t-correspondance-table)
"Return a copy of t-string converted with the correspondance table"
(while t-correspondance-table
(let ((cur-from-char (car (car t-correspondance-table)))
(cur-to-char (cdr (car t-correspondance-table))))
(setq t-string (replace-regexp-in-string cur-from-char
cur-to-char
t-string))
(setq t-correspondance-table (cdr t-correspondance-table))))
t-string)
(defun conlanging//get-boundary ()
"Get the boundary of either the selected region, or if there is none the
word the cursor is over"
(interactive)
(let* ((beg (region-beginning))
(end (region-end))
(boundary-word (bounds-of-thing-at-point 'word)))
(if (= beg end)
boundary-word
(cons beg end))))
(defun conlanging//replace-char-by-table (correspondance-table)
"Replaces selected text’s strings according to the table passed as argument. The
table is a list of pairs, the first element of the pair is a regex to be
searched in the selected text and the second element of the pair the string it
has to be replaced with."
(let* ((cur-boundary (conlanging//get-boundary))
(beg (car cur-boundary))
(end (cdr cur-boundary)))
(setq regionp (buffer-substring-no-properties beg end))
(setq regionp (conlanging//replace-string-by-char regionp
correspondance-table))
(delete-region beg end)
(goto-char beg)
(insert regionp)))
(defun conlanging/matter-to-runes ()
"Replaces translitterated Mattér to its runic writing system"
(interactive)
(conlanging//replace-char-by-table latin-to-runes-table))
(defun conlanging/matter-to-native-latin ()
"Replaces translitterated Mattér to its native latin writing system"
(interactive)
(conlanging//replace-char-by-table latin-to-native-table))
(defun conlanging/matter-to-latex-runes ()
(interactive)
(conlanging//replace-char-by-table latin-to-latex-runes))

16
spacemacs-layers/conlanging/packages.el Normal file
View File

@ -0,0 +1,16 @@
;;; packages.el --- conlanging layer packages file for Spacemacs.
;;
;; Copyright (c) 2012-2018 Sylvain Benner & Contributors
;;
;; Author: Lucien Cartier-Tilet <phundrak@phundrak.fr>
;; URL: https://github.com/syl20bnr/spacemacs
;;
;; This file is not part of GNU Emacs.
;;
;;; License: GPLv3
(defconst conlanging-packages
'())
;;; packages.el ends here

20
xresources/.Xresources Normal file
View File

@ -0,0 +1,20 @@
URxvt.scrollBar: false
URxvt.internalBorder: 0
URxvt.externalBorder: 0
URxvt.borderLess: true
URxvt.transparent: true
URxvt.shading: 40
URxvt.fading: 2%
URxvt.depth: 16
URxvt.fadeColor: grey
UXTerm*faceName: Source Code Pro for Powerline:style=book
! UXTerm*faceName: Dejavu Sans Mono for Powerline:style=book
UXTerm*faceNameDoublesize: IPAGothic:style=Regular
UXTerm*faceSize: 9
UXTerm*borderLess: true
UXTerm*externalBorder: 0
UXTerm*internalBorder: 0
URxvt.font: xft:Source Code Pro for Powerline:pixelsize=9
st.font: Source Code Pro for Powerline:style=book
st.shell: fish

89
xsetwacom-my-preferences Executable file
View File

@ -0,0 +1,89 @@
#!/bin/bash
#
# From:
# https://bitbucket.org/denilsonsa/small_scripts/src/default/xsetwacom_my_preferences.sh
#
# CONFIGURATION
# Set this to your (stylus) device. Find it by running:
# xsetwacom --list devices
DEVICE='Wacom USB Bamboo PAD Pen stylus'
# These numbers are specific for each device. Get them by running:
# xsetwacom --set "Your device name here" ResetArea
# xsetwacom --get "Your device name here" Area
AREAX=10690
AREAY=6680
# END OF CONFIGURATION
SCREEN="$1"
if [ -z "$SCREEN" -o "$SCREEN" = "--help" -o "$SCREEN" = "-help" -o "$SCREEN" = "-h" ]; then
echo 'This script configures a Wacom tablet to one specific monitor, or to '
echo 'the entire desktop. In addition, it also reduces the tablet area in '
echo 'order to keep the same aspect ratio as the monitor.'
echo
echo 'How to run this script? Run one of the following lines:'
CONNECTED_DISPLAYS=`xrandr -q --current | sed -n 's/^\([^ ]\+\) connected .*/\1/p'`
for d in desktop $CONNECTED_DISPLAYS; do
echo " $0 $d"
done
exit
fi
if [ "$SCREEN" = "desktop" ]; then
# Sample xrandr line:
# Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 32767 x 32767
LINE=`xrandr -q --current | sed -n 's/^Screen 0:.*, current \([0-9]\+\) x \([0-9]\+\),.*/\1 \2/p'`
read WIDTH HEIGHT <<< "$LINE"
else
# Sample xrandr lines:
# LVDS1 connected 1366x768+0+312 (normal left inverted right x axis y axis) 309mm x 174mm
# VGA1 disconnected (normal left inverted right x axis y axis)
# HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 509mm x 286mm
LINE=`xrandr -q --current | sed -n "s/^${SCREEN}"' connected \([0-9]\+\)x\([0-9]\+\)+.*/\1 \2/p'`
read WIDTH HEIGHT <<< "$LINE"
fi
if [ -z "$WIDTH" -o -z "$HEIGHT" ]; then
echo "Aborting."
exit 1
fi
# New values respecint aspect ratio:
RATIOAREAY=$(( AREAX * HEIGHT / WIDTH ))
RATIOAREAX=$(( AREAY * WIDTH / HEIGHT ))
if [ "$AREAY" -gt "$RATIOAREAY" ]; then
NEWAREAX="$AREAX"
NEWAREAY="$RATIOAREAY"
else
NEWAREAX="$RATIOAREAX"
NEWAREAY="$AREAY"
fi
xsetwacom --set "$DEVICE" Area 0 0 "$NEWAREAX" "$NEWAREAY"
xsetwacom --set "$DEVICE" MapToOutput "$SCREEN"
# $ xsetwacom --list devices
# Wacom Graphire4 6x8 stylus id: 9 type: STYLUS
# Wacom Graphire4 6x8 eraser id: 10 type: ERASER
# Wacom Graphire4 6x8 cursor id: 11 type: CURSOR
# Wacom Graphire4 6x8 pad id: 12 type: PAD
# Button mappings only apply to the "pad" device.
# The wheel on Graphire4 acts as mouse buttons 4 and 5 (as a mouse wheel)
# The buttons on Graphire4 act as mouse buttons 8 and 9
# Default Area: 0 0 16704 12064
# ResetArea
#
# Other potentially useful parameters:
# * Mode: absolute or relative
# * Rotate: none, cw, ccw, half
# * MapToOutput: "next" (but is buggy), "desktop", or a name from xrandr