docs(picom): adapt file for better markdown export

docs/picom.org

@@ -23,15 +23,19 @@ shadow-radius = 17;
 #+END_SRC
 
 Picom can also apply some level of opacity on shadows.
+
 | Default value | ~0.75~ |
 | Min value     | ~0.0~  |
 | Max value     | ~1.0~  |
+
 #+BEGIN_SRC conf
 shadow-opacity = 0.75
 #+END_SRC
 
 The left and top offsets for shadows are expressed in pixels.
+
 | Default value | ~-15~ |
+
 #+BEGIN_SRC conf
 shadow-offset-x = -16;
 shadow-offset-y = -16;
@@ -47,7 +51,9 @@ shadow-color = "#171A20"
 
 It is possible to specify a list of conditions of windows that should
 have no shadow.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 shadow-exclude = [
   "name = 'Notification'",
@@ -65,7 +71,9 @@ shadows should not be painted in, such as a dock window region. For example,
 #+END_SRC
 would make the 10 pixels at the bottom of the screen not have any shadow painted
 on.
+
 | Default value | ~""~ |
+
 #+BEGIN_SRC conf :tangle no
 shadow-exclude-reg = ""
 #+END_SRC
@@ -86,7 +94,9 @@ Options in this subheader *will not* be exported to my configuration file.
 Thanks to this value, Picom can avoid drawing shadows on dock or panel windows.
 This option is deprecated, and users should use the ~wintypes~ option in their
 config file instead.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 no-dock-shadow = false;
 #+END_SRC
@@ -94,7 +104,9 @@ no-dock-shadow = false;
 This option allows Picom not to draw on drag-and-drop windows. It is
 deprecated, and users should use the ~wintypes~ option in their config
 file instead.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 no-dnd-shadow = false;
 #+END_SRC
@@ -110,7 +122,9 @@ or
 #+BEGIN_SRC conf :tangle no
 shadow-exclude = 'bounding_shaped && !rounded_corners'
 #+END_SRC
+
 | Default value | ~""~ |
+
 #+BEGIN_SRC conf :tangle no
 shadow-ignore-shaped = ""
 #+END_SRC
@@ -134,44 +148,56 @@ Picom has the ability to create some fading effects on windows when
 opening or closing or when the opacity changes. The following
 parameter toggles this feature on or off. However, its behaviour can
 be changed with ~no-fading-openclose~.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 fading = true
 #+END_SRC
 
 These values control the opacity change between steps while fading in
 and out.
+
 | Default value | ~0.028~ (fade-in), ~0.03~ (fade-out) |
 | Min value     | ~0.01~                             |
 | Max value     | ~1.0~                              |
+
 #+BEGIN_SRC conf
 fade-in-step = 0.25;
 fade-out-step = 0.23;
 #+END_SRC
 
 This value represents the time between steps in fade steps, in milliseconds.
+
 | Default value | ~10~ |
 | Min value     | ~1~  |
+
 #+BEGIN_SRC conf
 fade-delta = 20;
 #+END_SRC
 
 It is possible to exclude some windows that should not be faded with a specified
 list of conditions.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 fade-exclude = [ "class_g = 'mpv'" ];
 #+END_SRC
 
 This option allows Picom not to create any fade on windows opening or closing.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 no-fading-openclose = true;
 #+END_SRC
 
 Finally, this option is a workaround for Openbox, Fluxbox and others by not
 fading destroyed ARGB windows with WM frame.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 no-fading-destroyed-argb = false
 #+END_SRC
@@ -180,67 +206,83 @@ no-fading-destroyed-argb = false
 Picom is also able to create some opacity or transparency for windows, depending
 on their state or on some user-defined rules. For instance, the following value
 describes the opacity of inactive windows.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 inactive-opacity = 0.8;
 #+END_SRC
 
 On the other hand, it is possible to declare a default opacity for active
 windows.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 active-opacity = 1;
 #+END_SRC
 
 This however describes the opacity of window titlebars and borders.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 frame-opacity = 1.0;
 #+END_SRC
 
 ~menu-opacity~ describes the opacity for dropdown menus and pop-up
 menus.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 # menu-opacity = 0.9;
 #+END_SRC
 
 ~inactive-opacity-override~ allows the user to let inactive opacity set by ~-i~
 override the ~_NET_WM_OPACITY_ values of windows.
+
 | Default value | ~true~ |
+
 #+BEGIN_SRC conf
 inactive-opacity-override = true;
 #+END_SRC
 
 While it is possible to alter opacity on inactive windows, it is also possible
 to dim them.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 # inactive-dim = 1.0
 #+END_SRC
 
 It is also possible to use a fixed inactive dim value, instead of adjusting
 according to window opacity.
+
 | Default value | ~1.0~ |
 | Min value     | ~0.1~ |
 | Max value     | ~1.0~ |
+
 #+BEGIN_SRC conf
 # inactive-dim-fixed = 1.0
 #+END_SRC
 
 It is also possible to specify a list of conditions of windows that should
 always be considered focused.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 focus-exclude = [
   "class_g = 'mpv'",
@@ -253,7 +295,9 @@ The user can also specify a list of opacity rules, in the format
 ~PERCENT:PATTERN~, like ~50:name *= "Firefox"~ . ~picom-trans~ is recommended
 over this. Note we don't make any guarantee about possible conflicts with other
 programs that set ~_NET_WM_WINDOW_OPACITY~ on frame or client windows.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 opacity-rule = [];
 #+END_SRC
@@ -275,34 +319,44 @@ This value enables or disables the blur for the background of
 semi-transparent or ARGB windows. It has bad performances though, with
 driver-dependent behaviour. The name of the switch may change without
 prior notifications.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 blur-background = true;
 #+END_SRC
 
 Blur background of windows when the window frame is not opaque. If true, this
 implies the value ~true~ for ~blur-background~.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 blur-background-frame = true;
 #+END_SRC
 
 The following determines whether to use fixed blur strength rather than
 adjusting according to window opacity.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 blur-background-fixed = false;
 #+END_SRC
 
 Specify the blur convolution kernel, with the format
 ~"5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"~.
+
 | Default value | ~""~ |
+
 #+BEGIN_SRC conf
 # blur-kern = "3x3box";
 #+END_SRC
 
 It is possible to write exclude conditions for background blur.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 blur-background-exclude = [
   "window_type = 'desktop'",
@@ -315,55 +369,71 @@ blur-background-exclude = [
 ** General settings
 Daemonize process. Fork to background after initialization. Can cause
 issues with certain (badly-written) drivers.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 daemon = true;
 #+END_SRC
 
 Picom has three backends it can use: ~xrender~, ~glx~, and ~xr_glx_hybrid~. GLX
 backend is typically much faster but depends on a sane driver.
+
 | Default value | ~xrender~ |
+
 #+BEGIN_SRC conf
 backend = "glx";
 #+END_SRC
 
 This enables or disables VSync.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 vsync = true;
 #+END_SRC
 
 Enable remote control via D-Bus. See the *D-BUS API* section below for more
 details.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 dbus = false;
 #+END_SRC
 
 Try to detect WM windows (a non-override-redirect window with no child
 that has ~WM_STATE~) and marks them as active.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 mark-wmwin-focused = true;
 #+END_SRC
 
 Mark override-redirect windows that doesn't have a child window with ~WM_STATE~
 focused.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 mark-ovredir-focused = true;
 #+END_SRC
 
 Try to detect windows with rounded corners and don't consider them shaped
 windows. The accuracy is not very high, unfortunately.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 detect-rounded-corners = true;
 #+END_SRC
 
 Detect ~_NET_WM_OPACITY~ on client windows, useful for window managers not
 passing ~_NET_WM_OPACITY~ of client windows to frame windows.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 detect-client-opacity = true;
 #+END_SRC
@@ -372,7 +442,9 @@ Limit picom to repaint at most once every 1 / ~refresh_rate~ second to
 boost performance. This should not be used with ~vsync
 drm/opengl/opengl-oml~ as they essentially do sw-opti's job already,
 unless you wish to specify a lower refresh rate than the actual value.
+
 | Default value | ~""~ |
+
 #+BEGIN_SRC conf
 # sw-opti =;
 #+END_SRC
@@ -380,7 +452,9 @@ unless you wish to specify a lower refresh rate than the actual value.
 Use EWMH ~_NET_ACTIVE_WINDOW~ to determine currently focused window, rather than
 listening to ~FocusIn~/~FocusOut~ event. Might have more accuracy, provided that
 the WM supports it.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 # use-ewmh-active-win = false;
 #+END_SRC
@@ -389,27 +463,35 @@ Unredirect all windows if a full-screen opaque window is detected, to
 maximize performance for full-screen windows. Known to cause
 flickering when redirecting/unredirecting windows. =paint-on-overlay=
 may make the flickering less obvious.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 unredir-if-possible = false;
 #+END_SRC
 
 Delay before unredirecting the window, in milliseconds.
+
 | Default value | ~0~ |
+
 #+BEGIN_SRC conf
 unredir-if-possible-delay = 0;
 #+END_SRC
 
 Conditions of windows that shouldn't be considered full-screen for unredirecting
 screen.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 unredir-if-possible-exclude = [];
 #+END_SRC
 
 Use ~WM_TRANSIENT_FOR~ to group windows, and consider windows in the same group
 focused at the same time.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 detect-transient = true;
 #+END_SRC
@@ -417,7 +499,9 @@ detect-transient = true;
 Use ~WM_CLIENT_LEADER~ to group windows, and consider windows in the same group
 focused at the same time. ~WM_TRANSIENT_FOR~ has higher priority if
 detect-transient is enabled, too.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 detect-client-leader = true;
 #+END_SRC
@@ -431,14 +515,18 @@ corruption issues of blur, in which case you should use the blur radius value
 here (e.g. with a 3x3 kernel, you should use ~--resize-damage 1~, with a 5x5 one
 you use ~--resize-damage 2~, and so on). May or may not work with
 ~--glx-no-stencil~. Shrinking doesn't function correctly.
+
 | Default value | ~1~ |
+
 #+BEGIN_SRC conf
 resize-damage = 1;
 #+END_SRC
 
 Specify a list of conditions of windows that should be painted with
 inverted colour. Resource-hogging, and is not well tested.
+
 | Default value | ~[]~ |
+
 #+BEGIN_SRC conf
 invert-color-include = [];
 #+END_SRC
@@ -447,7 +535,9 @@ Disable the use of damage information. This cause the whole screen to
 be redrawn every time, instead of the part of the screen has actually
 changed. Potentially degrades the performance, but might fix some
 artefacts. The opposing option is use-damage
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 use-damage = false;
 #+END_SRC
@@ -455,21 +545,27 @@ use-damage = false;
 Use X Sync fence to sync clients' draw calls, to make sure all draw calls are
 finished before picom starts drawing. Needed on nvidia-drivers with GLX backend
 for some users.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 xrender-sync-fence = false;
 #+END_SRC
 
 Force all windows to be painted with blending. Useful if you have a
 glx-fshader-win that could turn opaque pixels transparent.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 force-win-blend = false;
 #+END_SRC
 
 Do not use EWMH to detect full-screen windows. Reverts to checking if a window is
 full-screen based only on its size and coordinates.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 no-ewmh-fullscreen = false;
 #+END_SRC
@@ -478,14 +574,18 @@ Dimming bright windows so their brightness doesn't exceed this set
 value. Brightness of a window is estimated by averaging all pixels in
 the window, so this could come with a performance hit. Setting this to
 1.0 disables this behaviour. Requires ~--use-damage~ to be disabled.
+
 | Default value | ~1.0~ |
+
 #+BEGIN_SRC conf
 max-brightness = 1.0;
 #+END_SRC
 
 Make transparent windows clip other windows like non-transparent windows do,
 instead of blending on top of them.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 transparent-clipping = false;
 #+END_SRC
@@ -499,7 +599,9 @@ Set the log level. Possible values in increasing level of importance are:
 Case doesn't matter. If using the "TRACE" log level, it's better to
 log into a file using ~--log-file~, since it can generate a huge stream
 of logs.
+
 | Default value | ~"debug"~ |
+
 #+BEGIN_SRC conf
 log-level = "warn";
 #+END_SRC
@@ -509,19 +611,25 @@ written to stderr. Otherwise, logs will to written to the given file,
 though some early logs might still be written to the stderr. When
 setting this option from the config file, it is recommended to use an
 absolute path.
+
 | Default value | ~''~ |
+
 #+BEGIN_SRC conf
 # log-file = '/path/to/your/log/file';
 #+END_SRC
 
 Show all X errors (for debugging)
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 # show-all-xerrors = false;
 #+END_SRC
 
 Write process ID to a file.
+
 | Default value | ~''~ |
+
 #+BEGIN_SRC conf
 # write-pid-path = '/path/to/your/log/file';
 #+END_SRC
@@ -574,7 +682,9 @@ Avoid using stencil buffer, useful if you don't have a stencil buffer.
 Might cause incorrect opacity when rendering transparent content (but
 never practically happened) and may not work with blur-background.
 Tests show a 15% performance boost. Recommended.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 glx-no-stencil = true;
 #+END_SRC
@@ -583,7 +693,9 @@ Avoid rebinding pixmap on window damage. Probably could improve
 performance on rapid window content changes, but is known to break
 things on some drivers (LLVMpipe, xf86-video-intel, etc.). Recommended
 if it works.
+
 | Default value | ~false~ |
+
 #+BEGIN_SRC conf
 glx-no-rebind-pixmap = false;
 #+END_SRC
@@ -592,7 +704,9 @@ Use specified GLSL fragment shader for rendering window contents. See
 ~compton-default-fshader-win.glsl~ and
 ~compton-fake-transparency-fshader-win.glsl~ in the source tree for
 examples.
+
 | Default value | ~''~ |
+
 #+BEGIN_SRC conf :tangle no
 glx-fshader-win = '';
 #+END_SRC